Heat shrink marker, thermal transfer print, continuous, 12.7mm/6.4mm, white, 54m
Številka proizvoda 554-51500 | TLFX127WH-PO-X-WH | Podrobnosti

Zahtevajte svojo individualno ponudbo zdaj

Zahtevajte ponudbo

Poiščite distributerja v svoji bližini

More products in this product group:

Application	TLFX is a halogen free European rail approved 2:1 heat shrink marker material supplied as a continuous tube and printable on both sides. Special material properties show low smoke propagation, density and toxicity. The tubing has been especially prepared so that print performance is excellent at all times. HellermannTyton's printer range allow users to create a high quality print. In addition it is possible to either perforate the tubing at pre-determined lengths or fully sever the markers.
Application Tool	H6100, TT431, TT4030, TT4030DS
Behaviour at low Temperature test method	ASTM D2671
Colour	White (WH)
Heat Aging Test	168h/150°C
Heat Aging test method	ASTM D638
Heat Shock Test	4h/150°C
Material	Polyolefin, cross-linked (PO-X)
PART DESCRIPTION	TLFX127WH-PO-X-WH
Pack Cont.	54m
Package Content packed in	carton
Printable	Yes
Product Family	TLFX – 2:1 Rail Limited Fire Hazard
Product Group	Shrinkable markers "Continuous Tube", thermal transfer
Short Description	Shrinkable markers continuous TLFX 2:1 printable 12.7/6.4 PO-X white 54m/box = 3 reels
Shrink Ratio	2:1
Type	TLFX127WH
Variant	Thin-Wall
With inner glue (Yes/No)	No


Longitudinal Change After Shrinkage	-6%
Longitudinal Change After Shrinkage test method	UL 224
Print Method	thermal transfer print
Print Method (Alternative)	laser beam print
Recov. ∅ d max.	6.4mm
Supplied ∅ D min.	12.7mm
Wall (WT)	0.68mm
Weight/Unit	1.155kg

ELV compliant (Article 4 - 2)	YES
Elongation at break	4.5
Elongation at break test method	ASTM D2671
Halogen-free	Yes
Hazardous Goods	No
Limited Fire Hazard	Yes
Min. Shrink Temperature - °C	+70 °C
Operating Temperature	-55 °C to +125 °C
Oxygen index	33.4%
Oxygen index test method	ISO 4589
ROHS compliant	Yes
Recommended Ribbon Type	TTDTHOUT
Reel Variant	continuous
Specifications	EN 45545-2
Specifications
Tensile Strength	12MPa
Tensile Strength test method	ASTM D257
Test Method Tensile Strength	ASTM D2671
Volume Resistance	10¹⁴ Ω cm

Samples ID-Tubings 905-50003

Na mojem seznamu izdelkov Ne pozabite

Če želite uporabiti seznam izdelkov, se prijavite ali registrirajte:
Prijava / Registracija
TT4030 556-04037
Thermal transfer printer
Na mojem seznamu izdelkov Ne pozabite

Če želite uporabiti seznam izdelkov, se prijavite ali registrirajte:
Prijava / Registracija
TT431 556-00400
Thermal transfer printer
Na mojem seznamu izdelkov Ne pozabite

Če želite uporabiti seznam izdelkov, se prijavite ali registrirajte:
Prijava / Registracija
TT4030DS 556-04061
Thermal transfer printer
Na mojem seznamu izdelkov Ne pozabite

Če želite uporabiti seznam izdelkov, se prijavite ali registrirajte:
Prijava / Registracija
H6100 391-00110
Electrical Hot Air Tool
Na mojem seznamu izdelkov Ne pozabite

Če želite uporabiti seznam izdelkov, se prijavite ali registrirajte:
Prijava / Registracija
TTDTHOUT 40MM 556-00139
Thermal printer ribbons for
Na mojem seznamu izdelkov Ne pozabite

Če želite uporabiti seznam izdelkov, se prijavite ali registrirajte:
Prijava / Registracija