Application |
These cable ties and EdgeClip assemblies are ideal for use where holes are not acceptable or where due to temperature problems adhesives will fail. Once the cable tie is fastened around the cables the EdgeClip is presented ready for attaching to the panel. Widely used within the automotive and panel building industries these cable ties and EdgeClips save time and money.
The silver-grey clamp, the heart of our EdgeClips, consists of doubletempered spring steel in accordance with DIN EN 10132-4 C75S. The spring steel gives the clamp both the necessary rigidity to provide high pull-off forces and also sufficient flexibility for various possible applications.
The double coating is applied initially with a zinc plate system followed by inorganic surface sealing. Naturally, no chromium (VI) is used in this process. The clamp therefore complies with the current EU Directive 200/53/EC on end of life vehicles and the prohibition on heavy metals.
The refined spring-steel clamp also fulfils the requirements for resistance to salt spray stipulated in DIN EN ISO 9227 NSS (min. 840 h without corrosion of base metal) and DIN EN ISO 6270-Z-CH (min. 720 h without corrosion of base material).
This solution has therefore been approved by many OEMs for exposed installation locations, e.g. in engine compartments and the running-gear area. |
Articolo |
T50SOSEC12E
|
Colore |
Nero (BK)
|
Descrizione |
La fascetta di cablaggio con EdgeClip HellermannTyton è progettata per instradare i fasci fissandoli al bordo di una lamiera di plastica o di metallo senza la necessità di un foro di montaggio. La clip è facile da fissare e la forza di estrazione è elevata grazie al morsetto metallico integrato che tiene in posizione la clip per bordi. Questa chiusura è modellata come una combinazione di clip e cravatta in un unico pezzo.
|
Descrizione Breve |
Fascetta fissaggio su bordo T50SOSEC12E
|
GLOBAL PART DESCRIPTION |
T50SOSEC12E-PA66HS-BK
|
Metodo di fissaggio |
Edge Clips
|
Quantità per |
confezione
|
Serraggio riapribile? |
No
|
Variante |
A dentatura esterna
|
org.mozilla.javascript.Undefined@0 |
YES
|
Cont. conf. |
500Pz.
|
org.mozilla.javascript.Undefined@0 |
nessuno
|
Materiale |
Poliammide 6.6 stabilizzata al calore (PA66HS)
|
Prodotto: Categoria |
Fascette di fissaggio 1-piece per ancoraggi su bordo
|
Prodotto: Famiglia |
Serie EdgeClip
|
Tipo di serraggio |
dente in plastica
|
Utensile |
ProCut 9 no battery, MK3PNSP2, EVOcut, MK7P, MK10-SB, MK20, EVO7, EVO7SP, EVO7i, EVO7iSP, EVO9, EVO9SP, EVO9i, EVO9iSP
|