30/07/2026

Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

5,996 products
Reset all
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Compare
KK4-PA6HIR-BK 234-10400
Compare
Add to watchlist
Klam-Klips KK1 - 4.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.
Compare
WSI-PA66HIRHSUV-BK 111-12301
Compare
Add to watchlist
Compare
Compare
Add to watchlist
300 pcs.
Black (BK) WSI-PA66HIRHSUV-BK 111-12301
Fixing tie for hole (oval), outside serrated, ⌀2.0-50.0mm, black, 1000pcs.
Compare
T50ROSFTOVAL12.5B-PA66HIRHSUV-BK 157-00249
Compare
Add to watchlist
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) T50ROSFTOVAL12.5B-PA66HIRHSUV-BK 157-00249
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Compare
T50SVCOC10-14-PA46-GY 156-01045
Compare
Add to watchlist
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Compare
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SVCOC10-14-PA46-GY 156-01045
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
SAOM82-PA66HIRHSUV-BK 151-29701
Compare
Add to watchlist
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) SAOM82-PA66HIRHSUV-BK 151-29701
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀12.7 mm, ⌀12.0 mm, 1/2" (M12) Screw, black, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Mount and tie combination makes it easy to service bundles in the field.
Compare
HDM500-PA66HIRHSUV-BK 151-02096
Compare
Add to watchlist
Mount and tie combination makes it easy to service bundles in the field.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) HDM500-PA66HIRHSUV-BK 151-02096
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, ball bearing lock, 1245x12.3mm, ⌀17-380mm, black, 25pcs.
Stainless steel cable ties, coated, MBT_XHFC.
Compare
MBT49XHFC-SS316L-BK 111-01504
Compare
Add to watchlist
Stainless steel cable ties, coated, MBT_XHFC.
Compare
Compare
Add to watchlist
25 pcs.
Black (BK) MBT49XHFC-SS316L-BK 111-01504
Cable tie inside serrated for multiple routing, 210.82x4.7mm, ⌀1.6-38.0mm, black, 100pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
T50RDH-PA66W-BK 117-05011
Compare
Add to watchlist
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50RDH-PA66W-BK 117-05011
Cable tie outside serrated softgrip, 140.0x12.7mm, ⌀5.0-25.4mm, black/blue, 500pcs.
Soft Grip Cable Ties (2-component cable ties).
Compare
SGT100S-PA66HS/TPE-BK/BU 111-50000
Compare
Add to watchlist
Soft Grip Cable Ties (2-component cable ties).
Compare
Compare
Add to watchlist
500 pcs.
Black (BK), Blue (BU) SGT100S-PA66HS/TPE-BK/BU 111-50000
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀3.0-35.0mm, blue, 100pcs.
Compare
MCTPP30R-PPMD-BU 111-01665
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP30R-PPMD-BU 111-01665
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Compare
SSPC4-SS316L-ML 151-00837
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) SSPC4-SS316L-ML 151-00837
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Compare
SC6.6-PA66HIRHSUV-BK 151-00927
Compare
Add to watchlist
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Compare
KK2-PA6HIR-BK 234-10200
Compare
Add to watchlist
Klam-Klips KK1 - 4.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU17C-AL/CR-BK 211-15170
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU8-AL-NA 211-10080
Compare
Add to watchlist
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
CCOVAL3-PA66HIRHSUV-BK 151-01244
Compare
Add to watchlist
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
Add to watchlist
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
CCOVAL4-PA66HIRHSUV-BK 151-01246
Compare
Add to watchlist
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
Add to watchlist
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
WSS8MM-PA66HIRHSW-BK 157-00034
Compare
Add to watchlist
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
Compare
Add to watchlist
300 pcs.
Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034
Fixing tie for stud, ⌀4.0-35.0mm, black, 1000pcs.
The T50SSBS50T-E allows very precise routing of cable bundles.
Compare
T50SSBS6OT-E-PA66HS-BK 157-00380
Compare
Add to watchlist
The T50SSBS50T-E allows very precise routing of cable bundles.
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SSBS6OT-E-PA66HS-BK 157-00380
Fixing tie for stud, ⌀2.0-50.0mm, black, 2000
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
T50ROSLPM8SMSO25-PA66HIRHSUV-BK 157-00362
Compare
Add to watchlist
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROSLPM8SMSO25-PA66HIRHSUV-BK 157-00362
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, black, 1000pcs.
Compare
T50SAH-PA66HS-BK 126-00163
Compare
Add to watchlist
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SAH-PA66HS-BK 126-00163
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Compare
Add to watchlist
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
Add to watchlist
500 pcs.
Grey (GY) T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT8SO25A-PA66HIRHS-GY 157-00120
Compare
Add to watchlist
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
Add to watchlist
500 pcs.
Grey (GY) T50ROSFT8SO25A-PA66HIRHS-GY 157-00120
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Compare
Add to watchlist
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Fixing tie for hole (round), ⌀1.6-30.0mm, natural, 100pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
OS170-FT7-HS-PA66HS-NA 157-00018
Compare
Add to watchlist
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) OS170-FT7-HS-PA66HS-NA 157-00018
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
OS170-FT7-PA66-BK 157-00017
Compare
Add to watchlist
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) OS170-FT7-PA66-BK 157-00017
Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.
Compare
OS170-FT7-LH-PA66HSUV-BK 157-00122
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) OS170-FT7-LH-PA66HSUV-BK 157-00122
Fixing tie for hole (oval), ⌀2.0-50.0mm, black, 100pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFTOVAL12.5A-PA66HIRHSUV-BK 157-00428
Compare
Add to watchlist
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
Add to watchlist
100
Black (BK) T50ROSFTOVAL12.5A-PA66HIRHSUV-BK 157-00428
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Compare
Add to watchlist
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Fixing tie with pipe/tube holder, ⌀17.0-21.8mm, black, 1000pcs.
Independent rotation allows for adjustable routing orientation.
Compare
T50SMVCMOC19M-PA66HIRHSUV-BK 156-01779
Compare
Add to watchlist
Independent rotation allows for adjustable routing orientation.
Compare
Compare
Add to watchlist
1000
Black (BK) T50SMVCMOC19M-PA66HIRHSUV-BK 156-01779
Fixing tie for hole (round), outside serrated, ⌀2.0-45.0mm, black, 100pcs.
Compare
T50ROSFT8-PA66HS-BK 156-00360
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50ROSFT8-PA66HS-BK 156-00360
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
FH Cable Tie Mounts for areas with limited space.
Compare
FH18-PA66-NA 151-61119
Compare
Add to watchlist
FH Cable Tie Mounts for areas with limited space.
Compare
Compare
Add to watchlist
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
LKC-PA66-BK 151-27010
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
CTM0-PA66-WH 151-30303
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, inside serrated, ⌀15.0-19.0mm, black, 1000pcs.
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292
Compare
Add to watchlist
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
Compare
Add to watchlist
2000 pcs.
Black (BK) T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Mount and tie combination makes it easy to service bundles in the field.
Compare
HDM401-PA66HIRHSUV-BK 151-07300
Compare
Add to watchlist
Mount and tie combination makes it easy to service bundles in the field.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) HDM401-PA66HIRHSUV-BK 151-07300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀12.7 mm, ⌀12.0 mm, 1/2" (M12) Screw, black, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Mount and tie combination makes it easy to service bundles in the field.
Compare
HDM501-PA66HIRHSUV-BK 151-07500
Compare
Add to watchlist
Mount and tie combination makes it easy to service bundles in the field.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) HDM501-PA66HIRHSUV-BK 151-07500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01341
Compare
Add to watchlist
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01341
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18R-PA66W-BK 111-01960
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66W-BK 111-01960
Accessory, LFPC-Series, black, 25m (LFPC70)
Compare
LFPC70-PEW-BK 111-93000
Compare
Add to watchlist
Compare
Compare
Add to watchlist
25 pcs.
Black (BK) LFPC70-PEW-BK 111-93000
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18R-PA66-BK 111-01910
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66-BK 111-01910
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Fixing tie with EdgeClip for bundling cables above and parlell to the edge.
Compare
T50ROSEC10-PA66HS/PA66HIRHS-BK 156-05904
Compare
Add to watchlist
Fixing tie with EdgeClip for bundling cables above and parlell to the edge.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC10-PA66HS/PA66HIRHS-BK 156-05904
Cable tie inside serrated, 205.0x4.7mm, ⌀1.5-55mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T80R-PA66W-BK 111-05060
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T80R-PA66W-BK 111-05060
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
CTAM mounts for applications with limited space.
Compare
CTAM1-PEEK-BGE 151-00757
Compare
Add to watchlist
CTAM mounts for applications with limited space.
Compare
Compare
Add to watchlist
100 pcs.
Beige (BGE) CTAM1-PEEK-BGE 151-00757
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 3000pcs.
The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.
Compare
T50R-PVDF-GY 111-02447
Compare
Add to watchlist
The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.
Compare
Compare
Add to watchlist
3000 pcs.
Grey (GY) T50R-PVDF-GY 111-02447
Cable tie inside serrated, 515.0x12.4mm, ⌀12.0-125.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
T250R-PA66HIRHSUV-BK 111-24805
Compare
Add to watchlist
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Compare
Add to watchlist
25 pcs.
Black (BK) T250R-PA66HIRHSUV-BK 111-24805
Cable tie inside serrated detectable, 301x4.8mm, ⌀10-80mm, blue, 100pcs.
Compare
MCTS300-PA66MD-BU 111-01399
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTS300-PA66MD-BU 111-01399
Stainless steel cable tie, ball bearing lock, 838.0x12.3mm, ⌀12.0-254.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT33XH-SS316L-ML 111-95339
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33XH-SS316L-ML 111-95339
Stainless steel cable tie, ball bearing lock, 362.0x16.0mm, ⌀12.0-102.0mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
MBT14UH-SS316L-ML 111-01301
Compare
Add to watchlist
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT14UH-SS316L-ML 111-01301
Stainless steel cable tie, ball bearing lock, 838.0x16.0mm, ⌀12.0-254.0mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
MBT33UH-SS316L-ML 111-01304
Compare
Add to watchlist
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33UH-SS316L-ML 111-01304
Stainless steel cable tie, ball bearing lock, 1092.0x16.0mm, ⌀12.0-330.0mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
MBT43UH-SS316L-ML 111-01305
Compare
Add to watchlist
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT43UH-SS316L-ML 111-01305
Stainless steel cable tie, ball bearing lock, 362x12.3mm, ⌀17-102mm, black, 50pcs.
Stainless steel cable ties, coated, MBT_XHFC.
Compare
MBT14XHFC-SS316L/SP-BK 111-00299
Compare
Add to watchlist
Stainless steel cable ties, coated, MBT_XHFC.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) MBT14XHFC-SS316L/SP-BK 111-00299
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H12P-PA66-NA 211-60129
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
T18R-PA66W-BK 111-01914
Compare
Add to watchlist
Head design guarantees high tensile strength and a low insertion force.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66W-BK 111-01914
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T30R-PA66W-BK 111-01974
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T30R-PA66W-BK 111-01974
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T50R-PA66W-BK 111-01964
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50R-PA66W-BK 111-01964
Cable tie inside serrated for multiple routing, 210x4.7mm, ⌀1.6-38.0mm, black, 500pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
T50RDH-PA66W-BK 117-05060
Compare
Add to watchlist
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50RDH-PA66W-BK 117-05060
Fixing tie for screw fixation, inside serrated, ⌀5.0-102.0mm, black, 50pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles.
Compare
T120MR-PA66-BK 113-12020
Compare
Add to watchlist
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) T120MR-PA66-BK 113-12020
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50ROSEC5A-PA66HS/PA66HIRHS-BK 156-00463
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 156-00463
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50ROSEC5A-PA66W-BK 156-04026
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50ROSEC5A-PA66W-BK 156-04026
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for side cable routing.
Compare
T50ROSEC22-PA66HS/PA66HIRHS-BK 156-01453
Compare
Add to watchlist
2-piece fixing tie with EdgeClip for side cable routing.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC22-PA66HS/PA66HIRHS-BK 156-01453
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀16.0-100.0mm, blue, 100pcs.
Compare
MCTPP120R-PPMD-BU 111-01668
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP120R-PPMD-BU 111-01668
Cable tie inside serrated detectable, 100.0x2.4mm, ⌀1.5-22.0mm, blue, 100pcs.
Compare
MCTPP18R-PPMD-BU 111-01664
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP18R-PPMD-BU 111-01664
Fixing tie for hole (round), inside serrated, ⌀1.5-16.0mm, natural, 100pcs.
Inside serrated T18RSF for round hole fixing and combined with cable tie fixing function.
Compare
T18RSF-PA66HS-NA 126-00416
Compare
Add to watchlist
Inside serrated T18RSF for round hole fixing and combined with cable tie fixing function.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T18RSF-PA66HS-NA 126-00416
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
WSSFT9B-PA66HIRHSUV-BK 156-00072
Compare
Add to watchlist
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) WSSFT9B-PA66HIRHSUV-BK 156-00072
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Eliminates the need for multiple sizes of fixed diameter clamps.
Compare
HDM25-PA66HIRHSUV-BK 151-00437
Compare
Add to watchlist
Eliminates the need for multiple sizes of fixed diameter clamps.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU7-AL-NA 211-10070
Compare
Add to watchlist
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), ⌀1.0-27.0mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RT18RSF-PA66-NA 115-01900
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) RT18RSF-PA66-NA 115-01900
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU4-AL-NA 211-10040
Compare
Add to watchlist
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU6-AL-NA 211-10060
Compare
Add to watchlist
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Compare
Add to watchlist
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
WSRFT9A-PA66HIRHSUV-BK 156-00070
Compare
Add to watchlist
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) WSRFT9A-PA66HIRHSUV-BK 156-00070
Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.
2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.
Compare
PT2AP1SFT6.5-PEEK-BGE 156-01090
Compare
Add to watchlist
2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.
Compare
Compare
Add to watchlist
500 pcs.
Beige (BGE) PT2AP1SFT6.5-PEEK-BGE 156-01090
Fixing tie with pipe/tube holder, inside serrated, ⌀5.0-9.0mm, black, 1000pcs.
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
T50RLOC5-9-SET-PA66HS/PA66HIRHSUV-BK 156-01289
Compare
Add to watchlist
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) T50RLOC5-9-SET-PA66HS/PA66HIRHSUV-BK 156-01289
Fixing tie for hole (round), inside serrated, ⌀1.6-32mm, black, 500pcs.
Fixing tie for round holes with Arrowhead.
Compare
T30RSF-PA66HS-BK 126-00329
Compare
Add to watchlist
Fixing tie for round holes with Arrowhead.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T30RSF-PA66HS-BK 126-00329
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
KR8G5 Srew Fixing Mounts with curved design
Compare
KR8G5-PA66HS-BK 151-24850
Compare
Add to watchlist
KR8G5 Srew Fixing Mounts with curved design
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
The 1-piece design of Aerial Support Ties reduces installation time.
Compare
TAS120L-PA66HIRHSUV-BK 111-01672
Compare
Add to watchlist
The 1-piece design of Aerial Support Ties reduces installation time.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) TAS120L-PA66HIRHSUV-BK 111-01672
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU10-AL-NA 211-10100
Compare
Add to watchlist
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU11C-AL/CR-BK 211-15110
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU14C-AL/CR-BK 211-15140
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU16C-AL/CR-BK 211-15160
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU18C-AL/CR-BK 211-15180
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU4C-AL/CR-BK 211-15040
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU5-AL-NA 211-10050
Compare
Add to watchlist
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU5C-AL/CR-BK 211-15050
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Compare
CC11-PA66HIRHSUV-BK 151-01144
Compare
Add to watchlist
Oval fir tree ensures a tight connection without rotation.
Compare
Compare
Add to watchlist
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Bundling clip for hole (round), L=27.3mm, black, 20000pcs.
Compare
BCOWFT6M-PA66HIRHS-BK 151-02226
Compare
Add to watchlist
Compare
Compare
Add to watchlist
20000 pcs.
Black (BK) BCOWFT6M-PA66HIRHS-BK 151-02226
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Compare
T50ML-PA66-NA 113-05419
Compare
Add to watchlist
Screw mount style creates low insertion and high extraction force.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T50ML-PA66-NA 113-05419
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Compare
Add to watchlist
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Compare
T50SOSFT6E1-PA46-GY 157-00059
Compare
Add to watchlist
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Compare
Compare
Add to watchlist
1000 pcs.
Grey (GY) T50SOSFT6E1-PA46-GY 157-00059
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Compare
T50SOSFT8E-PA46-GY 157-00115
Compare
Add to watchlist
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Compare
Compare
Add to watchlist
1000 pcs.
Grey (GY) T50SOSFT8E-PA46-GY 157-00115
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Compare
Add to watchlist
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Fixing tie for stud, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
2-piece fixing tie for stud bolts 5mm.
Compare
T50SOSSBS5-PA66HS/PA66-BK 156-00079
Compare
Add to watchlist
2-piece fixing tie for stud bolts 5mm.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSBS5-PA66HS/PA66-BK 156-00079
Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.
Compare
T50REC20-PA66HS/PA66HIRHS-BK 156-00898
Compare
Add to watchlist
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50REC20-PA66HS/PA66HIRHS-BK 156-00898
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
2-piece Fixing tie for round holes made from PA46.
Compare
T50RFT8GSD-PA46-GY 156-00235
Compare
Add to watchlist
2-piece Fixing tie for round holes made from PA46.
Compare
Compare
Add to watchlist
1000 pcs.
Grey (GY) T50RFT8GSD-PA46-GY 156-00235
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
WSIFT9A-PA66HIRHSUV-BK 156-00069
Compare
Add to watchlist
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) WSIFT9A-PA66HIRHSUV-BK 156-00069
Fixing tie for hole (round), inside serrated, ⌀5.0-81.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
T80ISFT6.5-PA66HS-BK 156-01699
Compare
Add to watchlist
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T80ISFT6.5-PA66HS-BK 156-01699
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
CL8-PA66-NA 151-02258
Compare
Add to watchlist
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 100pcs.
Compare
MSC2LP-SS304-ML 151-01699
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MSC2LP-SS304-ML 151-01699

Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  United Arab Emirates

Social Media

© HellermannTyton 2026 (v4.312.2)  |  Update: 25/07/2026  |  Privacy Settings
Contact