MDU S3 Splice Only with 4 SE MKII 3A trays for 96 horizontal splices
Art.-Nr. 857-03068
| MDU-S3S-C02A1
|
Copied
- Maximum 96 Fibre Splices
- Small Angled IR Fibre Management System (FMS)
- 4 SE MKII Trays with 3A Splice Bridges
- Horizontal Splice Orientation for 2 FMS cable entry points
- Fitted Loop Through Anchor Gland
- Optional MDU Accessories
- IP54/IK08
- UV Stable / UL-94 V0 Rating
Show more
Show less
Request quote
More products in this product group:
| Colour | Light Grey (LTGY) |
| Content |
MDU S3 enclosure Central Small Angled IR Fibre Management System (FMS) 2 x Fibre Retention Blocks / FMS Entry Points 4 x SE MKII Splice Trays fitted with 2x3A Splice Bridges 1 x Loop Through Anchor Bracket 1 x Cable Entry Seal Kit (3-14mm range) 1 x Wall Mounting Kit |
| PART DESCRIPTION | MDU-S3S-C02A1 |
| Product Family | Fibre Optic External/Internal Enclosure |
| Product Group | S3 Series MDU/MBU Enclosures |
| Qty Trays | 4 |
| Short Description | MDU S3 Splice Only with 4 SE MKII 3A trays for 96 horizontal splices |
| Splice Capacity | 96 |
| Technical Description |
MDU-S3S-C02A1 has been designed with the small angled HellermannTyton IR Fibre Management System (FMS) and is fitted with 4 SE-IR 3A MKII splice trays giving a maximum of 96 3A fibre splices and management for 3 PLC splitters. The central position of the FMS provides a horizontal splice position, and the fibre entry block is fitted with 2 red fibre slot retaining blocks. The fibre slot retaining blocks guide fibre elements into the entry block, the foam pads on the retainer is partially cut through to accommodate a range of fibre counts. A loop through seal and anchor bracket is pre-fitted on the left port of the base. The dual outlet of the bracket allows for loop through applications. The black rubber seals cover a cable range of 3.0mm to 14.0mm. An extensive range of optional accessories is available upon request and include lock, M20 cable glands (up to 14mm), SE or coloured splice trays, splitter holders for trays, internal or external loop storage baskets. The S3 enclosure is 340 x 247 x 76mm (H x W x D) and is manufactured in light grey (RAL 7035) ABS (Acrylonitrile Butadiene Styrene): the S3 is UV stable with an UL-94 V0, IP54 and IK08 rating. The enclosure cover can be customised with a moulded or labelled customer logo. (MOQ applies). |
| Type | MDU-S3S-C02A1 |
| Typical Application | Designed for deployment within the last mile of the FTTx network, the HellermannTyton MDU S3 Splice Only enclosure can be used for Point to Point (P2P) or Point to Multi Point (P2MP) requirements with the addition of PLC bare end splitters. |
| Variant | Indoor/Outdoor FTTx Enclosures |