Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
20/08/2025

Results for "Shipbuilding"

5,201 products found 7 further hits
There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (2772)

Cable Ties Inside Serrated  (1549) Cable Ties Outside Serrated  (73) Cable Ties, Releasable  (29) Cable Ties, Stainless Steel  (211) Cable Ties With Fixing Elements  (246) Cable Tie Mounts  (208) Fixing Elements  (28) Clips, Clamps and Plugs  (465)
Cable Ties and Fixings
Cable Ties and Fixings (2772)
Insulation

Insulation  (585)

Heat Shrink Tubing  (447) Heat Shrinkable Moulded Shapes  (141) Insulating tubes  (3)
Insulation
Insulation (585)
Cable Protection Systems

Cable Protection Systems  (183)

Non-Metallic Conduit Systems  (1) Spiral-Reinforced Conduit Systems  (16) Protective Tubing and Spiral Binding  (103) Expandable Braided Sleeves  (27) Open Woven Sleeves  (55) Edge Protection  (7) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (183)
Electrical Installation

Electrical Installation  (223)

Wire Connectors  (39) Cable Rods  (2) Electrical Tapes  (95) Cast Resin Technology  (82) Gel Technology  (2) Chemicals  (3)
Electrical Installation
Electrical Installation (223)
Identification Systems

Identification Systems  (1238)

Wire and Cable Markers  (1002) Control Panel Labelling  (66) Industrial Identification  (56) RFID tags and cable ties  (75) Security Labeling  (1) Hazardous Area Identification  (67) Printers and Software  (41)
Identification Systems
Identification Systems (1238)
Application Tooling

Application Tooling  (203)

Automatic Cable Tying System  (120) Application Tooling for Cable Ties  (63) Application Tooling for Snappers  (3) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (12) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (203)
5,201 products
Reset all
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀4.30-5.30mm, various, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀4.30-5.30mm, various, box=500pcs.
WIC3-L1,L2,L3,N,Earth-PA66-MIX 561-03302
Compare
Add to watchlist
500 pcs.
Various (MIX) WIC3-L1,L2,L3,N,Earth-PA66-MIX 561-03302
Cable marker, inkjet print "L3", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "L3", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-L3-PA66-YE 561-03334
Compare
Add to watchlist
500 pcs.
Yellow (YE) WIC3-L3-PA66-YE 561-03334
Cable marker, inkjet print "1", ⌀0.80-2.20mm, brown, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "1", ⌀0.80-2.20mm, brown, box=1000pcs.
WIC0-1-PA66-BN 561-00611
Compare
Add to watchlist
1000 pcs.
Brown (BN) WIC0-1-PA66-BN 561-00611
Cable marker, inkjet print "2", ⌀0.80-2.20mm, red, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "2", ⌀0.80-2.20mm, red, box=1000pcs.
WIC0-2-PA66-RD 561-00622
Compare
Add to watchlist
1000 pcs.
Red (RD) WIC0-2-PA66-RD 561-00622
Cable marker, inkjet print "3", ⌀0.80-2.20mm, orange, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "3", ⌀0.80-2.20mm, orange, box=1000pcs.
WIC0-3-PA66-OG 561-00633
Compare
Add to watchlist
1000 pcs.
Orange (OG) WIC0-3-PA66-OG 561-00633
Cable marker, inkjet print "4", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "4", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-4-PA66-YE 561-00644
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-4-PA66-YE 561-00644
Cable marker, inkjet print "9", ⌀0.80-2.20mm, white, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "9", ⌀0.80-2.20mm, white, box=1000pcs.
WIC0-9-PA66-WH 561-00699
Compare
Add to watchlist
1000 pcs.
White (WH) WIC0-9-PA66-WH 561-00699
Cable marker, inkjet print "0-9", ⌀0.80-2.20mm, special, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "0-9", ⌀0.80-2.20mm, special, box=1000pcs.
WIC0-0-9-PA66-Special 561-00100
Compare
Add to watchlist
1000 pcs.
International resistor colour code (CC) WIC0-0-9-PA66-Special 561-00100
Cable marker, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-00994
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-00994
Cable marker, inkjet print "⏚", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "⏚", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-Earth-PA66-YE 561-00734
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-Earth-PA66-YE 561-00734
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-L1,L2,L3,N,Earth-PA66-YE 561-00303
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-L1,L2,L3,N,Earth-PA66-YE 561-00303
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, special, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, special, box=1000pcs.
WIC0-L1,L2,L3,N,Earth-PA66-Special 561-00302
Compare
Add to watchlist
1000 pcs.
International resistor colour code (CC) WIC0-L1,L2,L3,N,Earth-PA66-Special 561-00302
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, special, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, special, box=1000pcs.
WIC0-L1,L2,L3,N,Earth-PA66-Special 561-00301
Compare
Add to watchlist
1000 pcs.
International resistor colour code (CC) WIC0-L1,L2,L3,N,Earth-PA66-Special 561-00301
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, special, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "L1,L2,L3,N,⏚", ⌀0.80-2.20mm, special, box=1000pcs.
WIC0-L1,L2,L3,N,Earth-PA66-Special 561-00300
Compare
Add to watchlist
1000 pcs.
International resistor colour code (CC) WIC0-L1,L2,L3,N,Earth-PA66-Special 561-00300
Cable marker, inkjet print "T", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "T", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-T-PA66-YE 561-00204
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-T-PA66-YE 561-00204
Cable marker, inkjet print "P", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "P", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-P-PA66-YE 561-00164
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-P-PA66-YE 561-00164
Cable marker, inkjet print "M", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "M", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-M-PA66-YE 561-00134
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-M-PA66-YE 561-00134
Cable marker, inkjet print "L", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "L", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-L-PA66-YE 561-00124
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-L-PA66-YE 561-00124
Cable marker, inkjet print "B,C,U,V,W,P,D,F,I,M", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, inkjet print "B,C,U,V,W,P,D,F,I,M", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-B,C,U,V,W,P,D,F,I,M-PA66-YE 561-00005
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-B,C,U,V,W,P,D,F,I,M-PA66-YE 561-00005
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10SS-PA666V0/SS304-BK 151-03008
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM10SS-PA666V0/SS304-BK 151-03008
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCD180SM8-PA666V0/ST/ZN-BK 151-03015
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM8-PA666V0/ST/ZN-BK 151-03015
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
Compare
Add to watchlist
140 pcs.
Black (BK) RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
Compare
Add to watchlist
140 pcs.
Black (BK) RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
Compare
Add to watchlist
140 pcs.
Black (BK) RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
Compare
Add to watchlist
140 pcs.
Black (BK) RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
Compare
Add to watchlist
160 pcs.
Black (BK) RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
Compare
Add to watchlist
160 pcs.
Black (BK) RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
Compare
Add to watchlist
160 pcs.
Black (BK) RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
Compare
Add to watchlist
160 pcs.
Black (BK) RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 90°, black, 140pcs.
RCD90LM10SS-PA666V0/SS304-BK 151-03010
Compare
Add to watchlist
140 pcs.
Black (BK) RCD90LM10SS-PA666V0/SS304-BK 151-03010
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
Compare
Add to watchlist
140 pcs.
Black (BK) RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
RCD90LM8-PA666V0/ST/ZN-BK 151-02878
Compare
Add to watchlist
140 pcs.
Black (BK) RCD90LM8-PA666V0/ST/ZN-BK 151-02878
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
RCD90LM8SS-PA666V0/SS304-BK 151-03144
Compare
Add to watchlist
140 pcs.
Black (BK) RCD90LM8SS-PA666V0/SS304-BK 151-03144
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
Compare
Add to watchlist
160 pcs.
Black (BK) RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
RCD90SM8-PA666V0/ST/ZN-BK 151-02877
Compare
Add to watchlist
160 pcs.
Black (BK) RCD90SM8-PA666V0/ST/ZN-BK 151-02877
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
RCD90SM8SS-PA666V0/SS304-BK 151-03011
Compare
Add to watchlist
160 pcs.
Black (BK) RCD90SM8SS-PA666V0/SS304-BK 151-03011
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
Compare
Add to watchlist
280 pcs.
Black (BK) RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
Compare
Add to watchlist
280 pcs.
Black (BK) RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
Compare
Add to watchlist
280 pcs.
Black (BK) RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180LM8SS-PA66HIRHSUV/SS304-BK 151-01952
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180LM8SS-PA66HIRHSUV/SS304-BK 151-01952
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
Compare
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
Compare
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
Compare
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCA180SM10.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCB180SM10SS-PA66HIRHSUV/SS304-BK 151-01945
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM10SS-PA66HIRHSUV/SS304-BK 151-01945
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 180°, black, 280pcs.
RCA180SM10.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 180°, black, 280pcs.
RCB180SM10SS-PA666V0/SS304-BK 151-03005
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM10SS-PA666V0/SS304-BK 151-03005
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.4 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.4 mm, 180°, black, 280pcs.
RCB180SM8-PA666V0/ST/ZN-BK 151-03013
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM8-PA666V0/ST/ZN-BK 151-03013
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
Compare
Add to watchlist
200 pcs.
Black (BK) RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
Compare
Add to watchlist
200 pcs.
Black (BK) RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
Compare
Add to watchlist
200 pcs.
Black (BK) RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
Compare
Add to watchlist
280 pcs.
Black (BK) RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
RCB90SM10SS-PA666V0/SS304-BK 151-03006
Compare
Add to watchlist
280 pcs.
Black (BK) RCB90SM10SS-PA666V0/SS304-BK 151-03006
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
Compare
Add to watchlist
300 pcs.
Black (BK) RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
Compare
Add to watchlist
300 pcs.
Black (BK) RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.4 mm, 180°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.4 mm, 180°, black, 300pcs.
RCA180SM8-PA666V0/ST/ZN-BK 151-03012
Compare
Add to watchlist
300 pcs.
Black (BK) RCA180SM8-PA666V0/ST/ZN-BK 151-03012
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.
RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-01416
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-01416
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 30°, black, 200pcs.
RCA30LM12-PA66HIRHSUV/ST/ZN-BK 151-01433
Compare
Add to watchlist
200 pcs.
Black (BK) RCA30LM12-PA66HIRHSUV/ST/ZN-BK 151-01433
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 30°, black, 200pcs.
RCA30LM6-PA66HIRHSUV/ST/ZN-BK 151-01642
Compare
Add to watchlist
200 pcs.
Black (BK) RCA30LM6-PA66HIRHSUV/ST/ZN-BK 151-01642
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 30°, black, 200pcs.
RCA30LM8-PA66HIRHSUV/ST/ZN-BK 151-01431
Compare
Add to watchlist
200 pcs.
Black (BK) RCA30LM8-PA66HIRHSUV/ST/ZN-BK 151-01431
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 30°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 30°, black, 300pcs.
RCA30SM10-PA66HIRHSUV/ST/ZN-BK 151-01429
Compare
Add to watchlist
300 pcs.
Black (BK) RCA30SM10-PA66HIRHSUV/ST/ZN-BK 151-01429
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 30°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 30°, black, 300pcs.
RCA30SM12-PA66HIRHSUV/ST/ZN-BK 151-01430
Compare
Add to watchlist
300 pcs.
Black (BK) RCA30SM12-PA66HIRHSUV/ST/ZN-BK 151-01430
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 30°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 30°, black, 300pcs.
RCA30SM6-PA66HIRHSUV/ST/ZN-BK 151-01641
Compare
Add to watchlist
300 pcs.
Black (BK) RCA30SM6-PA66HIRHSUV/ST/ZN-BK 151-01641
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 30°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 30°, black, 300pcs.
RCA30SM8-PA66HIRHSUV/ST/ZN-BK 151-01428
Compare
Add to watchlist
300 pcs.
Black (BK) RCA30SM8-PA66HIRHSUV/ST/ZN-BK 151-01428
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 200pcs.
RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
Compare
Add to watchlist
200 pcs.
Black (BK) RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.
RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.
RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 300pcs.
RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
Compare
Add to watchlist
300 pcs.
Black (BK) RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 15°, black, 160pcs.
RCC15SM12-PA66HIRHSUV/ST/ZN-BK 151-01485
Compare
Add to watchlist
160 pcs.
Black (BK) RCC15SM12-PA66HIRHSUV/ST/ZN-BK 151-01485
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 15°, black, 160pcs.
RCC15SM8-PA66HIRHSUV/ST/ZN-BK 151-01483
Compare
Add to watchlist
160 pcs.
Black (BK) RCC15SM8-PA66HIRHSUV/ST/ZN-BK 151-01483
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCC180MM10-PA66HIRHSUV/ST/ZN-BK 151-01478
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM10-PA66HIRHSUV/ST/ZN-BK 151-01478
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCC180MM12-PA66HIRHSUV/ST/ZN-BK 151-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM12-PA66HIRHSUV/ST/ZN-BK 151-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCC180SM8-PA666V0/ST/ZN-BK 151-03014
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM8-PA666V0/ST/ZN-BK 151-03014
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCC180SM8SS-PA666V0/SS304-BK 151-02737
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM8SS-PA666V0/SS304-BK 151-02737
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 140pcs.
RCC30LM6-PA66HIRHSUV/ST/ZN-BK 151-01658
Compare
Add to watchlist
140 pcs.
Black (BK) RCC30LM6-PA66HIRHSUV/ST/ZN-BK 151-01658
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 140pcs.
RCC30LM8-PA66HIRHSUV/ST/ZN-BK 151-01489
Compare
Add to watchlist
140 pcs.
Black (BK) RCC30LM8-PA66HIRHSUV/ST/ZN-BK 151-01489
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 160pcs.
RCC30SM12-PA66HIRHSUV/ST/ZN-BK 151-01488
Compare
Add to watchlist
160 pcs.
Black (BK) RCC30SM12-PA66HIRHSUV/ST/ZN-BK 151-01488
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 160pcs.
RCC30SM6-PA66HIRHSUV/ST/ZN-BK 151-01657
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC30SM6-PA66HIRHSUV/ST/ZN-BK 151-01657
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCC90SM8SS-PA66HIRHSUV/SS304-BK 151-02001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC90SM8SS-PA66HIRHSUV/SS304-BK 151-02001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 160pcs.
RCC90SM12-PA66HIRHSUV/ST/ZN-BK 151-01494
Compare
Add to watchlist
160 pcs.
Black (BK) RCC90SM12-PA66HIRHSUV/ST/ZN-BK 151-01494
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 15°, black, 160pcs.
RCD15SM10-PA66HIRHSUV/ST/ZN-BK 151-01510
Compare
Add to watchlist
160 pcs.
Black (BK) RCD15SM10-PA66HIRHSUV/ST/ZN-BK 151-01510
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 15°, black, 160pcs.
RCD15SM12-PA66HIRHSUV/ST/ZN-BK 151-01511
Compare
Add to watchlist
160 pcs.
Black (BK) RCD15SM12-PA66HIRHSUV/ST/ZN-BK 151-01511
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 15°, black, 160pcs.
RCD15SM6-PA66HIRHSUV/ST/ZN-BK 151-01664
Compare
Add to watchlist
160 pcs.
Black (BK) RCD15SM6-PA66HIRHSUV/ST/ZN-BK 151-01664
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
RCD15SM8-PA66HIRHSUV/ST/ZN-BK 151-01509
Compare
Add to watchlist
160 pcs.
Black (BK) RCD15SM8-PA66HIRHSUV/ST/ZN-BK 151-01509
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Facebook  YouTube  Link Corporate Blog  Instagram  X  LinkedIn 
Contact General Terms of Sale and Supply Imprint Guidelines and commitments Privacy Policy Newsletter
Update: 16/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Update: 16/08/2025 | Privacy Settings
Contact