Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
19/12/2025

Results for "Shipbuilding"

5,234 products found 8 further hits
There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (2805)

Cable Ties Inside Serrated  (1583) Cable Ties Outside Serrated  (79) Cable Ties, Releasable  (29) Cable Ties, Stainless Steel  (211) Cable Ties With Fixing Elements  (246) Cable Tie Mounts  (201) Fixing Elements  (28) Clips, Clamps and Plugs  (465)
Cable Ties and Fixings
Cable Ties and Fixings (2805)
Insulation

Insulation  (586)

Heat Shrink Tubing  (448) Heat Shrinkable Moulded Shapes  (142) Insulating tubes  (3)
Insulation
Insulation (586)
Cable Protection Systems

Cable Protection Systems  (165)

Spiral-Reinforced Conduit Systems  (16) Protective Tubing and Spiral Binding  (95) Expandable Braided Sleeves  (18) Open Woven Sleeves  (46) Edge Protection  (7) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (165)
Electrical Installation

Electrical Installation  (235)

Wire Connectors  (39) Cable Rods  (2) Electrical Tapes  (106) Cast Resin Technology  (83) Gel Technology  (2) Chemicals  (3)
Electrical Installation
Electrical Installation (235)
Identification Systems

Identification Systems  (1240)

Wire and Cable Markers  (1002) Control Panel Labelling  (66) Industrial Identification  (57) RFID tags and cable ties  (75) Security Labeling  (1) Hazardous Area Identification  (68) Printers and Software  (41)
Identification Systems
Identification Systems (1240)
Application Tooling

Application Tooling  (206)

Automatic Cable Tying System  (123) Application Tooling for Cable Ties  (63) Application Tooling for Snappers  (3) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (12) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (206)
5,234 products
Reset all
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110.0mm, black, 100pcs.
T50L-PA66HS-BK 111-05450
Compare
Add to watchlist
100 pcs.
Black (BK) T50L-PA66HS-BK 111-05450
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
Compare
Add to watchlist
280 pcs.
Black (BK) RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
Compare
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
Compare
Add to watchlist
200 pcs.
Black (BK) RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
RCB180SM12SS-PA66HIRHSUV/SS304-BK 151-01946
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM12SS-PA66HIRHSUV/SS304-BK 151-01946
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
Compare
Add to watchlist
5
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
RCB180SM6SS-PA66HIRHSUV/SS304-BK 151-01943
Compare
Add to watchlist
280
Black (BK) RCB180SM6SS-PA66HIRHSUV/SS304-BK 151-01943
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
RCB180SM8SS-PA66HIRHSUV/SS304-BK 151-01944
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280
Black (BK) RCB180SM8SS-PA66HIRHSUV/SS304-BK 151-01944
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
Compare
Add to watchlist
200 pcs.
Black (BK) RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 20pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 20pcs.
RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-03039
Compare
Add to watchlist
20
Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-03039
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
Compare
Add to watchlist
280 pcs.
Black (BK) RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
RCB90LM10SS-PA66HIRHSUV/SS304-BK 151-01973
Compare
Add to watchlist
200
Black (BK) RCB90LM10SS-PA66HIRHSUV/SS304-BK 151-01973
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
Compare
Add to watchlist
200 pcs.
Black (BK) RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
RCB90LM8SS-PA66HIRHSUV/SS304-BK 151-01972
Compare
Add to watchlist
200
Black (BK) RCB90LM8SS-PA66HIRHSUV/SS304-BK 151-01972
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
Compare
Add to watchlist
280 pcs.
Black (BK) RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
RCB90SM6SS-PA66HIRHSUV/SS304-BK 151-01967
Compare
Add to watchlist
280
Black (BK) RCB90SM6SS-PA66HIRHSUV/SS304-BK 151-01967
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
Compare
Add to watchlist
300 pcs.
Black (BK) RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180LM6SS-PA66HIRHSUV/SS304-BK 151-01919
Compare
Add to watchlist
200
Black (BK) RCA180LM6SS-PA66HIRHSUV/SS304-BK 151-01919
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
RCA180SM12SS-PA66HIRHSUV/SS304-BK 151-01914
Compare
Add to watchlist
300
Black (BK) RCA180SM12SS-PA66HIRHSUV/SS304-BK 151-01914
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 5pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 5pcs.
RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01670
Compare
Add to watchlist
5
Black (BK) RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01670
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 30pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 30pcs.
RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-03035
Compare
Add to watchlist
30
Black (BK) RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-03035
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 300pcs.
RCA180SM6SS-PA66HIRHSUV/SS304-BK 151-01911
Compare
Add to watchlist
300
Black (BK) RCA180SM6SS-PA66HIRHSUV/SS304-BK 151-01911
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 30pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 30pcs.
RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-03036
Compare
Add to watchlist
30
Black (BK) RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-03036
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.
RCA180SM8SS-PA66HIRHSUV/SS304-BK 151-01912
Compare
Add to watchlist
300
Black (BK) RCA180SM8SS-PA66HIRHSUV/SS304-BK 151-01912
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 30°, black, 200pcs.
RCA30LM10-PA66HIRHSUV/ST/ZN-BK 151-01432
Compare
Add to watchlist
200 pcs.
Black (BK) RCA30LM10-PA66HIRHSUV/ST/ZN-BK 151-01432
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
Compare
Add to watchlist
200 pcs.
Black (BK) RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
Compare
Add to watchlist
300 pcs.
Black (BK) RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 15°, black, 160pcs.
RCC15SM10-PA66HIRHSUV/ST/ZN-BK 151-01484
Compare
Add to watchlist
160 pcs.
Black (BK) RCC15SM10-PA66HIRHSUV/ST/ZN-BK 151-01484
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable label, White/Transparent
Palm sized hand held self-laminating label dispenser RiteOn.
Compare
Cable label, White/Transparent
RO202-1401-CL/WH 550-14012
Compare
Add to watchlist
150 pack
White (WH), Transparent (CL) RO202-1401-CL/WH 550-14012
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Head allows for a 0.2
Compare
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FlexTack FMB for round and angled surfaces
Compare
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FMB4APT-A-PA66HS-WH 151-02977
Compare
Add to watchlist
100 pcs.
White (WH) FMB4APT-A-PA66HS-WH 151-02977
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, black, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, black, box=1000pcs.
WIC1-BLACK-PA66-BK 561-01750
Compare
Add to watchlist
1000 pcs.
Black (BK) WIC1-BLACK-PA66-BK 561-01750
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, brown, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, brown, box=1000pcs.
WIC1-BROWN-PA66-BN 561-01751
Compare
Add to watchlist
1000 pcs.
Brown (BN) WIC1-BROWN-PA66-BN 561-01751
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, red, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, red, box=1000pcs.
WIC1-RED-PA66-RD 561-01752
Compare
Add to watchlist
1000 pcs.
Red (RD) WIC1-RED-PA66-RD 561-01752
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-YELLOW-PA66-YE 561-01754
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC1-YELLOW-PA66-YE 561-01754
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, green, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, green, box=1000pcs.
WIC1-GREEN-PA66-GN 561-01755
Compare
Add to watchlist
1000 pcs.
Green (GN) WIC1-GREEN-PA66-GN 561-01755
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, blue, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, blue, box=1000pcs.
WIC1-BLUE-PA66-BU 561-01756
Compare
Add to watchlist
1000 pcs.
Blue (BU) WIC1-BLUE-PA66-BU 561-01756
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, violet, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.00-2.80mm, violet, box=1000pcs.
WIC1-VIOLET-PA66-VT 561-01757
Compare
Add to watchlist
1000 pcs.
Violet (VT) WIC1-VIOLET-PA66-VT 561-01757
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, black, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, black, box=1000pcs.
WIC2-BLACK-PA66-BK 561-02750
Compare
Add to watchlist
1000 pcs.
Black (BK) WIC2-BLACK-PA66-BK 561-02750
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, brown, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, brown, box=1000pcs.
WIC2-BROWN-PA66-BN 561-02751
Compare
Add to watchlist
1000 pcs.
Brown (BN) WIC2-BROWN-PA66-BN 561-02751
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, red, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, red, box=1000pcs.
WIC2-RED-PA66-RD 561-02752
Compare
Add to watchlist
1000 pcs.
Red (RD) WIC2-RED-PA66-RD 561-02752
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, green, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, green, box=1000pcs.
WIC2-GREEN-PA66-GN 561-02755
Compare
Add to watchlist
1000 pcs.
Green (GN) WIC2-GREEN-PA66-GN 561-02755
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, blue, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, blue, box=1000pcs.
WIC2-BLUE-PA66-BU 561-02756
Compare
Add to watchlist
1000 pcs.
Blue (BU) WIC2-BLUE-PA66-BU 561-02756
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, violet, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀2.80-3.80mm, violet, box=1000pcs.
WIC2-VIOLET-PA66-VT 561-02757
Compare
Add to watchlist
1000 pcs.
Violet (VT) WIC2-VIOLET-PA66-VT 561-02757
Cable marker, to identify: wire and cable/for snapping, inkjet print "L1,L2,L3,N,⏚", ⌀2.80-3.80mm, various, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print "L1,L2,L3,N,⏚", ⌀2.80-3.80mm, various, box=1000pcs.
WIC2-L1,L2,L3,N,Earth-PA66-MIX 561-02300
Compare
Add to watchlist
1000 pcs.
Various (MIX) WIC2-L1,L2,L3,N,Earth-PA66-MIX 561-02300
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, black, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, black, box=500pcs.
WIC3-BLACK-PA66-BK 561-03750
Compare
Add to watchlist
500 pcs.
Black (BK) WIC3-BLACK-PA66-BK 561-03750
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, brown, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, brown, box=500pcs.
WIC3-BROWN-PA66-BN 561-03751
Compare
Add to watchlist
500 pcs.
Brown (BN) WIC3-BROWN-PA66-BN 561-03751
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, red, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, red, box=500pcs.
WIC3-RED-PA66-RD 561-03752
Compare
Add to watchlist
500 pcs.
Red (RD) WIC3-RED-PA66-RD 561-03752
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-YELLOW-PA66-YE 561-03754
Compare
Add to watchlist
500 pcs.
Yellow (YE) WIC3-YELLOW-PA66-YE 561-03754
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, green, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, green, box=500pcs.
WIC3-GREEN-PA66-GN 561-03755
Compare
Add to watchlist
500 pcs.
Green (GN) WIC3-GREEN-PA66-GN 561-03755
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, blue, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, blue, box=500pcs.
WIC3-BLUE-PA66-BU 561-03756
Compare
Add to watchlist
500 pcs.
Blue (BU) WIC3-BLUE-PA66-BU 561-03756
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, violet, box=500pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print, ⌀4.30-5.30mm, violet, box=500pcs.
WIC3-VIOLET-PA66-VT 561-03757
Compare
Add to watchlist
500 pcs.
Violet (VT) WIC3-VIOLET-PA66-VT 561-03757
Cable marker, to identify: wire and cable/for snapping, inkjet print "Z", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print "Z", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-Z-PA66-YE 561-00264
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-Z-PA66-YE 561-00264
Cable marker, to identify: wire and cable/for snapping, inkjet print "N", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Compare
Cable marker, to identify: wire and cable/for snapping, inkjet print "N", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-N-PA66-YE 561-00144
Compare
Add to watchlist
1000 pcs.
Yellow (YE) WIC0-N-PA66-YE 561-00144
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 4-PVC-YE 515-01644
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HGDC1-3 4-PVC-YE 515-01644
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 4-PVC-YE 531-07732
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 4-PVC-YE 531-07732
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 1-PVC-YE 531-07926
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 1-PVC-YE 531-07926
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 2-PVC-YE 531-07927
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 2-PVC-YE 531-07927
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 3-PVC-YE 531-07928
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 3-PVC-YE 531-07928
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 5-PVC-YE 531-07930
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 5-PVC-YE 531-07930
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 A-PVC-YE 531-07935
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 A-PVC-YE 531-07935
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 B-PVC-YE 531-07936
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 B-PVC-YE 531-07936
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 C-PVC-YE 531-07937
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 C-PVC-YE 531-07937
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 D-PVC-YE 531-07938
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 D-PVC-YE 531-07938
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 E-PVC-YE 531-07939
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 E-PVC-YE 531-07939
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 F-PVC-YE 531-07940
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 F-PVC-YE 531-07940
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 L-PVC-YE 531-07946
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 L-PVC-YE 531-07946
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 M-PVC-YE 531-07947
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 M-PVC-YE 531-07947
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 P-PVC-YE 531-07950
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 P-PVC-YE 531-07950
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 R-PVC-YE 531-07952
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 R-PVC-YE 531-07952
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 S-PVC-YE 531-07953
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 S-PVC-YE 531-07953
Cable marker, to identify: wire and cable/for sliding, laser print "T", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "T", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 T-PVC-YE 531-07954
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 T-PVC-YE 531-07954
Cable marker, to identify: wire and cable/for sliding, laser print "X", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Compare
Cable marker, to identify: wire and cable/for sliding, laser print "X", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 X-PVC-YE 531-07958
Compare
Add to watchlist
1000 pcs.
Yellow (YE) HODS85 X-PVC-YE 531-07958
Heat Shrinkable Tubing 2:1 flexible 9.5/4.8 blue
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible 9.5/4.8 blue
TF21-9.5/4.8-PO-X-BU 309-20956
Compare
Add to watchlist
50 metre
Blue (BU) TF21-9.5/4.8-PO-X-BU 309-20956
Heat Shrinkable Tubing 2:1 flexible 9.5/4.8 white
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible 9.5/4.8 white
TF21-9.5/4.8-PO-X-WH 309-20959
Compare
Add to watchlist
50 metre
White (WH) TF21-9.5/4.8-PO-X-WH 309-20959
Heat Shrinkable Tubing 2:1 flexible 12.7/6.4 blue
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible 12.7/6.4 blue
TF21-12.7/6.4-PO-X-BU 309-21276
Compare
Add to watchlist
50 metre
Blue (BU) TF21-12.7/6.4-PO-X-BU 309-21276
Heat Shrinkable Tubing 2:1 flexible19.0/9.5 white
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible19.0/9.5 white
TF21-19.1/9.5-PO-X-WH 309-11909
Compare
Add to watchlist
50 metre
White (WH) TF21-19.1/9.5-PO-X-WH 309-11909
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 yellow
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 yellow
TF21-25.4/12.7-PO-X-YE 309-12544
Compare
Add to watchlist
50 metre
Yellow (YE) TF21-25.4/12.7-PO-X-YE 309-12544
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 white
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 white
TF21-25.4/12.7-PO-X-WH 309-12549
Compare
Add to watchlist
50 metre
White (WH) TF21-25.4/12.7-PO-X-WH 309-12549
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 red
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 red
TF21-50.8/25.4-PO-X-RD 309-15082
Compare
Add to watchlist
60 metre
Red (RD) TF21-50.8/25.4-PO-X-RD 309-15082
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 yellow
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 yellow
TF21-50.8/25.4-PO-X-YE 309-15084
Compare
Add to watchlist
60 metre
Yellow (YE) TF21-50.8/25.4-PO-X-YE 309-15084
Facebook  YouTube  Link Corporate Blog  Instagram  X  LinkedIn 
Contact General Terms of Sale and Supply Imprint Guidelines and commitments Privacy Policy Newsletter
Update: 13/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Update: 13/12/2025 | Privacy Settings
Contact