Professional Cable Entry System VarioPlate.

The VarioPlate Cable Entry System is used to install multiple cables of different diameters, with or without pre-terminated plugs or connectors, or wherever space is limited.

Find out more on how to route and seal different sized cables with VarioPlate.

VarioPlate Cable Entry System is used to route and seal cables of different sizes.

The VarioPlate Cable Entry System is used to install multiple cables of different diameters, with or without pre-terminated plugs or connectors, or wherever space is limited. It is available in 4 different frame sizes (24, 16, 10 and 4) which correspond to the cut-out dimensions commonly used in panel building. Combinable grommets with 1, 2 or 4 holes, are available for cable diameters ranging from 3-16 mm (size S) and 16-33 mm (size L).

System benefits at a glance:

Modular design saves you time and space
Easy to assemble and adapt
Integrated frame gasket seals up to IP66
Small and large grommets combinable in one frame
Inserts include moulded strain relief retainer
Design of insert hole compensates for cable diameter tolerance
Suitable for all common cut-out dimensions
IP65 and IP66 approved design

Contact your local expert

Easy as 1-2-3: the VarioPlate configurator.

Choose your cable entry solution in three steps.

1. Choose between four frame sizes
2. Combine grommets (1, 2 or 4 holes) for your cable diameters
3. Print or save the data directly to your computer

Quick and easy, in a few simple steps!

Configure now

Save time during installation:

Step 1: open the frame to insert the grommets

Step 1: remove the upper frame and install grommets

Step 2: choose your grommets in small and large size

Step 2: combine grommets (1, 2 or 4 holes) for cable diameters from 3 to 33 mm

Step 3: close the upper frame and bolt firmly onto enclosure

Contact your local expert

Privacy is as important to us as it is to you.
Read more about our privacy policy.