Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Please note: The combination of terms you searched for returned no matching results. Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

Cable tie mount for stud, ⌀M12, M12 Screw, black, 500pcs.

SBH2 allow cables to run at 90° to the panel.

Compare

SBU-M12-PA66HIRHS-BK 151-01308

Compare

Add to watchlist

SBH2 allow cables to run at 90° to the panel.

Compare

Cable tie mount for stud, ⌀M12, M12 Screw, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) SBU-M12-PA66HIRHS-BK 151-01308

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀7.6 - 8.0 mm, natural, 3000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP3M3-PA66-NA 151-02591

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀7.6 - 8.0 mm, natural, 3000pcs.

Compare

Add to watchlist

3000 pcs.

Natural (NA) MP3M3-PA66-NA 151-02591

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP4M3-PA66-NA 151-01076

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP4M3-PA66-NA 151-01076

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP5M3-PA66-NA 151-01077

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP5M3-PA66-NA 151-01077

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP2M5-PA66-NA 151-02503

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) MP2M5-PA66-NA 151-02503

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Allows multiple cables to be run in parallel.

Compare

MP3M5-PA66-NA 154-00500

Compare

Add to watchlist

Allows multiple cables to be run in parallel.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP3M5-PA66-NA 154-00500

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP3M5-PA66-NA 151-02504

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) MP3M5-PA66-NA 151-02504

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP3M5-PA66HS-NA 151-02581

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) MP3M5-PA66HS-NA 151-02581

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Allows multiple cables to be run in parallel.

Compare

MP4M5-PA66-NA 154-00700

Compare

Add to watchlist

Allows multiple cables to be run in parallel.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP4M5-PA66-NA 154-00700

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP4M5-PA66-NA 151-02505

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 200pcs.

Compare

Add to watchlist

200 pcs.

Natural (NA) MP4M5-PA66-NA 151-02505

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Allows multiple cables to be run in parallel.

Compare

MP5M5-PA66-NA 154-00900

Compare

Add to watchlist

Allows multiple cables to be run in parallel.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP5M5-PA66-NA 154-00900

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP5M5-PA66-NA 151-02506

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, natural, 200pcs.

Compare

Add to watchlist

200 pcs.

Natural (NA) MP5M5-PA66-NA 151-02506

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mounts are secured with two screws.

Compare

MP1M3-PA66-NA 154-00000

Compare

Add to watchlist

Mounts are secured with two screws.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP1M3-PA66-NA 154-00000

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

MP1M5-PA66-NA 154-00100

Compare

Add to watchlist

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP1M5-PA66-NA 154-00100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, ⌀M5, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP1M5-PA66-NA 151-02502

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, ⌀M5, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) MP1M5-PA66-NA 151-02502

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, black, 2000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MP1M5-PA66W-BK 151-03079

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀5.1 mm, black, 2000pcs.

Compare

Add to watchlist

2000 pcs.

Black (BK) MP1M5-PA66W-BK 151-03079

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=4.0mm, ⌀2.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable Tie Mount TY3G1(S).

Compare

TY3G1-PA66V0-BK 151-01349

Compare

Add to watchlist

Cable Tie Mount TY3G1(S).

Compare

Cable tie mount for screw fixation, Wmax=4.0mm, ⌀2.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) TY3G1-PA66V0-BK 151-01349

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

TY-Series Mounts with rectangle design, self-adhesive.

Compare

TY8G1-PA66V0-BK 151-01350

Compare

Add to watchlist

TY-Series Mounts with rectangle design, self-adhesive.

Compare

Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) TY8G1-PA66V0-BK 151-01350

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount, Wmax=9.0mm, black, 500pcs.

LOK04.

Compare

LOK04-PA66-BK 151-80400

Compare

Add to watchlist

LOK04.

Compare

Cable tie mount, Wmax=9.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) LOK04-PA66-BK 151-80400

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 500Set

Compare

T50RIAHC3TSET-PA66HS/PA66HIRHS-BK 156-00989

Compare

Add to watchlist

Compare

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 500Set

Compare

Add to watchlist

500 Set

Black (BK) T50RIAHC3TSET-PA66HS/PA66HIRHS-BK 156-00989

Cable tie outside serrated for narrow space, 275x9.0mm, ⌀25.0-69.0mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RPE275-PA66HS-BK 112-00005

Compare

Add to watchlist

Compare

Cable tie outside serrated for narrow space, 275x9.0mm, ⌀25.0-69.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) RPE275-PA66HS-BK 112-00005

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie outside serrated for narrow space, 350x9.0mm, ⌀25.0-92.0mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RPE350-PA66HSW-BK 112-00006

Compare

Add to watchlist

Compare

Cable tie outside serrated for narrow space, 350x9.0mm, ⌀25.0-92.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) RPE350-PA66HSW-BK 112-00006

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie outside serrated for narrow space, 265x9mm, ⌀25.0-62.0mm, black, 100pcs.

Compare

LPH275-PA66W-BK 112-00306

Compare

Add to watchlist

Compare

Cable tie outside serrated for narrow space, 265x9mm, ⌀25.0-62.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) LPH275-PA66W-BK 112-00306

Cable tie outside serrated for narrow space, 355x9mm, ⌀25.0-92.0mm, black, 100pcs.

Compare

LPH350-PA66W-BK 112-00404

Compare

Add to watchlist

Compare

Cable tie outside serrated for narrow space, 355x9mm, ⌀25.0-92.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) LPH350-PA66W-BK 112-00404

Cable tie outside serrated for narrow space, 123x9mm, ⌀4.0-22mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.

Compare

LPH123-PA11-BK 112-00101

Compare

Add to watchlist

Compare

Cable tie outside serrated for narrow space, 123x9mm, ⌀4.0-22mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) LPH123-PA11-BK 112-00101

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.

Cable tie mount for hole (round), ⌀17.5 mm, black, 250pcs.

Robust Rivet Mount for

Compare

Spacer SFTP-PA6GF30/PA66HIRHS-BK 133-02636

Compare

Add to watchlist

Robust Rivet Mount for

Compare

Cable tie mount for hole (round), ⌀17.5 mm, black, 250pcs.

Compare

Add to watchlist

250 pcs.

Black (BK) Spacer SFTP-PA6GF30/PA66HIRHS-BK 133-02636

Backshell, 180°, nom⌀17.0mm, black, 900pcs.

Backshell

Compare

BSE180NW17-PA66/PA6FR-BK 151-02399

Compare

Add to watchlist

Backshell

Compare

Backshell, 180°, nom⌀17.0mm, black, 900pcs.

Compare

Add to watchlist

900 pcs.

Black (BK) BSE180NW17-PA66/PA6FR-BK 151-02399

Backshell, 90°, nom⌀17.0mm, black, 800

Backshell

Compare

BSE90NW17-PA66HS-BK 151-02773

Compare

Add to watchlist

Backshell

Compare

Backshell, 90°, nom⌀17.0mm, black, 800

Compare

Add to watchlist

800

Black (BK) BSE90NW17-PA66HS-BK 151-02773

Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, black, 100pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CTT20R-PA66-BK 112-51900

Compare

Add to watchlist

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) CTT20R-PA66-BK 112-51900

Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, natural, 1000pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CTT20R-PA66-NA 112-51904

Compare

Add to watchlist

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, natural, 1000pcs.

Compare

Add to watchlist

1000

Natural (NA) CTT20R-PA66-NA 112-51904

Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, black, 100pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CTT20R-PA66HS-BK 112-51905

Compare

Add to watchlist

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) CTT20R-PA66HS-BK 112-51905

Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, blue, 1000pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CTT60R-PA66-BU 112-52103

Compare

Add to watchlist

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, blue, 1000pcs.

Compare

Add to watchlist

1000

Blue (BU) CTT60R-PA66-BU 112-52103

Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, natural, 1000pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CTT60R-PA66-NA 112-52106

Compare

Add to watchlist

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) CTT60R-PA66-NA 112-52106

Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 1000pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CTT60R-PA66HS-BK 112-52114

Compare

Add to watchlist

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) CTT60R-PA66HS-BK 112-52114

Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100.0mm, black, 250pcs.

BHT375 - used for mounting cables via a single hole.

Compare

BHT375M-PA66HS-BK 150-47595

Compare

Add to watchlist

BHT375 - used for mounting cables via a single hole.

Compare

Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100.0mm, black, 250pcs.

Compare

Add to watchlist

250 pcs.

Black (BK) BHT375M-PA66HS-BK 150-47595

Compare

MOC22FMOC22M-PA66HIRHSUV-BK 156-02566

Compare

Add to watchlist

Compare

Cable clip

Compare

Add to watchlist

1000 pcs.

Black (BK) MOC22FMOC22M-PA66HIRHSUV-BK 156-02566

Stainless steel cable tie, folding, 330x10.0mm, ⌀25.0-90mm, metal, 100pcs.

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

MLT12SS10-SS316L-ML 111-95120

Compare

Add to watchlist

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

Stainless steel cable tie, folding, 330x10.0mm, ⌀25.0-90mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) MLT12SS10-SS316L-ML 111-95120

Stainless steel cable tie, folding, 330x5.0mm, ⌀20.0-90mm, metal, 100pcs.

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

MLT12SS5-SS316L-ML 111-94120

Compare

Add to watchlist

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

Stainless steel cable tie, folding, 330x5.0mm, ⌀20.0-90mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) MLT12SS5-SS316L-ML 111-94120

Stainless steel cable tie, folding, 430x5.0mm, ⌀20.0-120mm, metal, 100pcs.

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

MLT16SS5-SS316L-ML 111-94161

Compare

Add to watchlist

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

Stainless steel cable tie, folding, 430x5.0mm, ⌀20.0-120mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) MLT16SS5-SS316L-ML 111-94161

Stainless steel cable tie, folding, 630x5.0mm, ⌀20.0-180mm, metal, 100pcs.

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

MLT24SS5-SS316L-ML 111-91400

Compare

Add to watchlist

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

Stainless steel cable tie, folding, 630x5.0mm, ⌀20.0-180mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) MLT24SS5-SS316L-ML 111-91400

Stainless steel cable tie, folding, 230x10.0mm, ⌀25.0-60mm, metal, 100pcs.

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

MLT8SS10-SS316L-ML 111-95080

Compare

Add to watchlist

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

Stainless steel cable tie, folding, 230x10.0mm, ⌀25.0-60mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) MLT8SS10-SS316L-ML 111-95080

Stainless steel cable tie, folding, 230x5.0mm, ⌀20.0-60mm, metal, 100pcs.

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

MLT8SS5-SS316L-ML 111-94080

Compare

Add to watchlist

MLT-Series. Releasable stainless steel buckle tie with and without coating.

Compare

Stainless steel cable tie, folding, 230x5.0mm, ⌀20.0-60mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) MLT8SS5-SS316L-ML 111-94080

Stainless steel cable tie, ball bearing lock, 362x12.3mm, ⌀17.0-102mm, metal, 50pcs.

Stainless Steel Cable Ties, uncoated, MBT_XHS.

Compare

MBT14XHS-SS304-ML 111-02348

Compare

Add to watchlist

Stainless Steel Cable Ties, uncoated, MBT_XHS.

Compare

Stainless steel cable tie, ball bearing lock, 362x12.3mm, ⌀17.0-102mm, metal, 50pcs.

Compare

Add to watchlist

50 pcs.

Metal (ML) MBT14XHS-SS304-ML 111-02348

Stainless steel cable tie, ball bearing lock, 521x12.3mm, ⌀17.0-152mm, metal, 50pcs.

Stainless Steel Cable Ties, uncoated, MBT_XHS.

Compare

MBT20XHS-SS304-ML 111-02349

Compare

Add to watchlist

Stainless Steel Cable Ties, uncoated, MBT_XHS.

Compare

Stainless steel cable tie, ball bearing lock, 521x12.3mm, ⌀17.0-152mm, metal, 50pcs.

Compare

Add to watchlist

50 pcs.

Metal (ML) MBT20XHS-SS304-ML 111-02349

Stainless steel cable tie, ball bearing lock, 681x12.3mm, ⌀17.0-203mm, metal, 50pcs.

Stainless Steel Cable Ties, uncoated, MBT_XHS.

Compare

MBT27XHS-SS304-ML 111-02350

Compare

Add to watchlist

Stainless Steel Cable Ties, uncoated, MBT_XHS.

Compare

Stainless steel cable tie, ball bearing lock, 681x12.3mm, ⌀17.0-203mm, metal, 50pcs.

Compare

Add to watchlist

50 pcs.

Metal (ML) MBT27XHS-SS304-ML 111-02350

Stainless steel cable tie, ball bearing lock, 681.0x7.9mm, ⌀25.0-203.0mm, red, 50pcs.

Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.

Compare

MBT27HFCR-SS316L-RD 111-02404

Compare

Add to watchlist

Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.

Compare

Stainless steel cable tie, ball bearing lock, 681.0x7.9mm, ⌀25.0-203.0mm, red, 50pcs.

Compare

Add to watchlist

50 pcs.

Red (RD) MBT27HFCR-SS316L-RD 111-02404

Stainless steel cable tie, folding, 600.0x16.0mm, ⌀125.0mm, metal, 10pcs.

Compare

AMT6L16SB-SS316L-ML 111-00328

Compare

Add to watchlist

Compare

Stainless steel cable tie, folding, 600.0x16.0mm, ⌀125.0mm, metal, 10pcs.

Compare

Add to watchlist

10 pcs.

Metal (ML) AMT6L16SB-SS316L-ML 111-00328

Stainless steel cable tie, folding, 800.0x16.0mm, ⌀185.0mm, metal, 10pcs.

Compare

AMT8L16SB-SS316L-ML 111-00329

Compare

Add to watchlist

Compare

Stainless steel cable tie, folding, 800.0x16.0mm, ⌀185.0mm, metal, 10pcs.

Compare

Add to watchlist

10 pcs.

Metal (ML) AMT8L16SB-SS316L-ML 111-00329

Stainless steel cable tie, folding, 1000.0x16.0mm, ⌀250.0mm, metal, 10pcs.

Compare

AMT10L16SB-SS316L-ML 111-00330

Compare

Add to watchlist

Compare

Stainless steel cable tie, folding, 1000.0x16.0mm, ⌀250.0mm, metal, 10pcs.

Compare

Add to watchlist

10 pcs.

Metal (ML) AMT10L16SB-SS316L-ML 111-00330

Stainless steel cable tie, folding, 500.0x16.0mm, ⌀90.0mm, metal, 10pcs.

Compare

AMT5H16SB-SS316L-ML 111-00338

Compare

Add to watchlist

Compare

Stainless steel cable tie, folding, 500.0x16.0mm, ⌀90.0mm, metal, 10pcs.

Compare

Add to watchlist

10 pcs.

Metal (ML) AMT5H16SB-SS316L-ML 111-00338

Stainless steel cable tie, folding, 600.0x16.0mm, ⌀125.0mm, metal, 10pcs.

Compare

AMT6H16SB-SS316L-ML 111-00339

Compare

Add to watchlist

Compare

Stainless steel cable tie, folding, 600.0x16.0mm, ⌀125.0mm, metal, 10pcs.

Compare

Add to watchlist

10 pcs.

Metal (ML) AMT6H16SB-SS316L-ML 111-00339

Stainless steel cable tie, folding, 1000.0x16.0mm, ⌀250.0mm, metal, 10pcs.

Compare

AMT10H16SB-SS316L-ML 111-00341

Compare

Add to watchlist

Compare

Stainless steel cable tie, folding, 1000.0x16.0mm, ⌀250.0mm, metal, 10pcs.

Compare

Add to watchlist

10 pcs.

Metal (ML) AMT10H16SB-SS316L-ML 111-00341

Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm

Harness clip HC90SFT for oval holes and varying bundle diameter.

Compare

HC90SFT62x122-PA6HIR-BK 151-00164

Compare

Add to watchlist

Harness clip HC90SFT for oval holes and varying bundle diameter.

Compare

Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm

Compare

Add to watchlist

1000 pcs.

Black (BK) HC90SFT62x122-PA6HIR-BK 151-00164

Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

IAHC( )AH in combination with an IAHC( )T.

Compare

IAHC3BH-PA66HIRHS-BK 151-00380

Compare

Add to watchlist

IAHC( )AH in combination with an IAHC( )T.

Compare

Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

Add to watchlist

650 pcs.

Black (BK) IAHC3BH-PA66HIRHS-BK 151-00380

Cable clip (LOC20-25FT6.5LG)

Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.

Compare

LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371

Compare

Add to watchlist

Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.

Compare

Cable clip (LOC20-25FT6.5LG)

Compare

Add to watchlist

1000 pcs.

Black (BK) LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371

Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=13.5mm, Dmax=15.8mm, nom⌀=14.0 mm

A rotatable dual routing clip that keeps two routings secured and separated.

Compare

MOC14FT6.5-PA66HIRHSUV-BK 151-01768

Compare

Add to watchlist

A rotatable dual routing clip that keeps two routings secured and separated.

Compare

Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=13.5mm, Dmax=15.8mm, nom⌀=14.0 mm

Compare

Add to watchlist

3000 pcs.

Black (BK) MOC14FT6.5-PA66HIRHSUV-BK 151-01768

Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.

Compare

LC9FTOVAL-PA66HIRHS-BK 151-01880

Compare

Add to watchlist

Compare

Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) LC9FTOVAL-PA66HIRHS-BK 151-01880

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

EdgeClip for direct fixation up to two solar cables.

Compare

EC1-3SPDHC6-7-PA66HSUV-BK 151-03846

Compare

Add to watchlist

EdgeClip for direct fixation up to two solar cables.

Compare

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Compare

Add to watchlist

1000 pcs.

Black (BK) EC1-3SPDHC6-7-PA66HSUV-BK 151-03846

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic rivet fastener, ⌀3.0 mm, natural 1000pcs.

Plastic Rivets TY8P1.

Compare

TY3P1-PA66-NA 241-11319

Compare

Add to watchlist

Plastic Rivets TY8P1.

Compare

Plastic rivet fastener, ⌀3.0 mm, natural 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) TY3P1-PA66-NA 241-11319

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Plastic Rivets TY8P1.

Compare

TY8P1-PA66-BK 241-11810

Compare

Add to watchlist

Plastic Rivets TY8P1.

Compare

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) TY8P1-PA66-BK 241-11810

Cable clip for adhesive use/with pipe/tube holder, Dmin=13mm, Dmax=13.0mm

Compare

RA13-B-PA66-NA 151-00736

Compare

Add to watchlist

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmin=13mm, Dmax=13.0mm

Compare

Add to watchlist

100

Natural (NA) RA13-B-PA66-NA 151-00736

Cable clip for adhesive use/with pipe/tube holder, Dmax=16mm

Self adhesive one piece fixing clips RB14 and RB20.

Compare

RB16VHB-PA66-BK 151-13611

Compare

Add to watchlist

Self adhesive one piece fixing clips RB14 and RB20.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=16mm

Compare

Add to watchlist

200 pcs.

Black (BK) RB16VHB-PA66-BK 151-13611

Cable clip for adhesive use/with pipe/tube holder, Dmax=12mm

Self adhesive one piece fixing clips RB14 and RB20.

Compare

RB12VHB-PA66-NA 151-13612

Compare

Add to watchlist

Self adhesive one piece fixing clips RB14 and RB20.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=12mm

Compare

Add to watchlist

200 pcs.

Natural (NA) RB12VHB-PA66-NA 151-13612

Cable clip for adhesive use/with pipe/tube holder

Compare

SACTC12-MET-WH 151-00128

Compare

Add to watchlist

Compare

Cable clip for adhesive use/with pipe/tube holder

Compare

Add to watchlist

100 pcs.

White (WH) SACTC12-MET-WH 151-00128

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H10P-PA66HS-BK 211-60110

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H10P-PA66HS-BK 211-60110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H12P-PA66HS-BK 211-60130

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) H12P-PA66HS-BK 211-60130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H13P-PA66HS-BK 211-60140

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H13P-PA66HS-BK 211-60140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H14P-PA66HS-BK 211-60150

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) H14P-PA66HS-BK 211-60150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H15P-PA66HS-BK 211-00259

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) H15P-PA66HS-BK 211-00259

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H16P-PA66-BK 211-00260

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) H16P-PA66-BK 211-00260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H1P-PA66-NA 211-00261

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H1P-PA66-NA 211-00261

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H2P-PA66-NA 211-00263

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H2P-PA66-NA 211-00263

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H2P-PA66HS-BK 211-00262

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H2P-PA66HS-BK 211-00262

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H3P-PA66HS-BK 211-60040

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H3P-PA66HS-BK 211-60040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H3P-PA66-NA 211-00264

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H3P-PA66-NA 211-00264

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H4P-PA66HS-BK 211-60050

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) H4P-PA66HS-BK 211-60050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H4P-PA66-NA 211-00265

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H4P-PA66-NA 211-00265

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H5P-PA66-NA 211-00267

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H5P-PA66-NA 211-00267

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H6P-PA66HS-BK 211-60061

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H6P-PA66HS-BK 211-60061

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H7P-PA66-NA 211-00269

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H7P-PA66-NA 211-00269

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H7P-PA66HS-BK 211-60078

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H7P-PA66HS-BK 211-60078

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H8P-PA66HS-BK 211-60090

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H8P-PA66HS-BK 211-60090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H8P-PA66HS-BK 211-60007

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H8P-PA66HS-BK 211-60007

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H9P-PA66-NA 211-00271

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H9P-PA66-NA 211-00271

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H9P-PA66HS-BK 211-60098

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H9P-PA66HS-BK 211-60098

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, natural, 100pcs.

P-Clip, NX-Series.

Compare

NX0-PA66-NA 211-00242

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) NX0-PA66-NA 211-00242

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.

P-Clip, NX-Series.

Compare

NX0-PA66-BK 211-00254

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX0-PA66-BK 211-00254

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, natural, 100pcs.

P-Clip, NX-Series.

Compare

NX1-PA66-NA 211-00237

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) NX1-PA66-NA 211-00237

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.

P-Clip, NX-Series.

Compare

NX1-PA66-BK 211-00246

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX1-PA66-BK 211-00246

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, natural, 100pcs.

P-Clip, NX-Series.

Compare

NX3-PA66-NA 211-00234

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) NX3-PA66-NA 211-00234

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.

P-Clip, NX-Series.

Compare

NX3-PA66-BK 211-00248

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX3-PA66-BK 211-00248

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, natural, 100pcs.

P-Clip, NX-Series.

Compare

NX4-PA66-NA 211-00235

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) NX4-PA66-NA 211-00235

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.

P-Clip, NX-Series.

Compare

NX4-PA66-BK 211-00249

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX4-PA66-BK 211-00249

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, natural, 100pcs.

P-Clip, NX-Series.

Compare

NX6-PA66-NA 211-00236

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) NX6-PA66-NA 211-00236

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.

P-Clip, NX-Series.

Compare

NX6-PA66-BK 211-00256

Compare

Add to watchlist

P-Clip, NX-Series.

Compare

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX6-PA66-BK 211-00256

P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB14N-PA66W-BK 211-00184

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) AB14N-PA66W-BK 211-00184

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB16N-PA66W-BK 211-00186

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) AB16N-PA66W-BK 211-00186

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, natural, 100pcs.

P-Clip NXR-Series.

Compare

NX1A-PA66-NA 211-00238

Compare

Add to watchlist

P-Clip NXR-Series.

Compare

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) NX1A-PA66-NA 211-00238

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.

P-Clip NXR-Series.

Compare

NX1A-PA66-BK 211-00247

Compare

Add to watchlist

P-Clip NXR-Series.

Compare

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX1A-PA66-BK 211-00247

P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, natural, 100pcs.

P-Clip NXR-Series.

Compare

NXR8-PA66-NA 211-00239

Compare

Add to watchlist

P-Clip NXR-Series.

Compare

P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) NXR8-PA66-NA 211-00239

Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

‹ › ×