Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
22/08/2025

Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

5,808 products
Reset all
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Compare
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 5pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 5pcs.
RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01670
Compare
Add to watchlist
5 pcs.
Black (BK) RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01670
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 30°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 30°, black, 200pcs.
RCA30LM10-PA66HIRHSUV/ST/ZN-BK 151-01432
Compare
Add to watchlist
200 pcs.
Black (BK) RCA30LM10-PA66HIRHSUV/ST/ZN-BK 151-01432
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
Compare
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
Compare
Add to watchlist
200 pcs.
Black (BK) RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
300 pcs.
Black (BK) RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
Compare
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
Compare
Add to watchlist
300 pcs.
Black (BK) RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 15°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 15°, black, 160pcs.
RCC15SM10-PA66HIRHSUV/ST/ZN-BK 151-01484
Compare
Add to watchlist
160 pcs.
Black (BK) RCC15SM10-PA66HIRHSUV/ST/ZN-BK 151-01484
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCA180SM10.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCC180SM10SS-PA66HIRHSUV/SS304-BK 151-01977
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM10SS-PA66HIRHSUV/SS304-BK 151-01977
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.
RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCC180SM8SS-PA66HIRHSUV/SS304-BK 151-01976
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM8SS-PA66HIRHSUV/SS304-BK 151-01976
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 140pcs.
RCC30LM10-PA66HIRHSUV/ST/ZN-BK 151-01490
Compare
Add to watchlist
140 pcs.
Black (BK) RCC30LM10-PA66HIRHSUV/ST/ZN-BK 151-01490
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 140pcs.
RCC30LM12-PA66HIRHSUV/ST/ZN-BK 151-01491
Compare
Add to watchlist
140 pcs.
Black (BK) RCC30LM12-PA66HIRHSUV/ST/ZN-BK 151-01491
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 160pcs.
RCC30SM10-PA66HIRHSUV/ST/ZN-BK 151-01487
Compare
Add to watchlist
160 pcs.
Black (BK) RCC30SM10-PA66HIRHSUV/ST/ZN-BK 151-01487
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.
RCC30SM8-PA66HIRHSUV/ST/ZN-BK 151-01486
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC30SM8-PA66HIRHSUV/ST/ZN-BK 151-01486
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.
RCC30SM8SS-PA66HIRHSUV/SS304-BK 151-01992
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC30SM8SS-PA66HIRHSUV/SS304-BK 151-01992
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 140pcs.
RCC90LM10-PA66HIRHSUV/ST/ZN-BK 151-01496
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC90LM10-PA66HIRHSUV/ST/ZN-BK 151-01496
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 140pcs.
RCC90LM12-PA66HIRHSUV/ST/ZN-BK 151-01497
Compare
Add to watchlist
140 pcs.
Black (BK) RCC90LM12-PA66HIRHSUV/ST/ZN-BK 151-01497
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 140pcs.
RCC90LM6-PA66HIRHSUV/ST/ZN-BK 151-01660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC90LM6-PA66HIRHSUV/ST/ZN-BK 151-01660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 140pcs.
RCC90LM8-PA66HIRHSUV/ST/ZN-BK 151-01495
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC90LM8-PA66HIRHSUV/ST/ZN-BK 151-01495
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.
RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
Stainless steel cable tie, ball bearing lock, 685.0x7.9mm, ⌀12.0-203.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 685.0x7.9mm, ⌀12.0-203.0mm, metal, 50pcs.
MBT27H-SS316L-ML 111-94279
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT27H-SS316L-ML 111-94279
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.
Compare
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.
T120RHDM8-PA66HIRHS-BK 156-00408
Compare
Add to watchlist
100 pcs.
Black (BK) T120RHDM8-PA66HIRHS-BK 156-00408
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50REC5B-PA66HS/PA66HIRHS-BK 150-40582
Compare
Add to watchlist
500 pcs.
Black (BK) T50REC5B-PA66HS/PA66HIRHS-BK 150-40582
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for side cable routing.
Compare
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
T50ROSEC5B-PA66HS/PA66HIRHS-BK 156-00862
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC5B-PA66HS/PA66HIRHS-BK 156-00862
Fixing tie for edge, inside serrated, ⌀1.5-35.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Fixing tie for edge, inside serrated, ⌀1.5-35.0mm, black, 500pcs.
T30REC19-PA66HS/PA66HIRHS-BK 156-00947
Compare
Add to watchlist
500 pcs.
Black (BK) T30REC19-PA66HS/PA66HIRHS-BK 156-00947
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FlexTack FMB for round and angled surfaces
Compare
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FMB4APT-A-PA66HS-WH 151-02977
Compare
Add to watchlist
100 pcs.
White (WH) FMB4APT-A-PA66HS-WH 151-02977
Lacing tape, Flat, braided, 226N, -55 °C to +121 °C, natural, L=500m
Lacing tape of the LTHT1B series.
Compare
Lacing tape, Flat, braided, 226N, -55 °C to +121 °C, natural, L=500m
LTHT1B3NA-PA66-NA 174-00020
Compare
Add to watchlist
500 m
Natural (NA) LTHT1B3NA-PA66-NA 174-00020
Cable tie mount, Wmax=4.8mm, ⌀6.4 mm, natural, 100pcs.
Compare
Cable tie mount, Wmax=4.8mm, ⌀6.4 mm, natural, 100pcs.
LKCRF1-PA66-NA 151-27000
Compare
Add to watchlist
100 pcs.
Natural (NA) LKCRF1-PA66-NA 151-27000
Cable tie mount for stud, Wmax=13.0mm, ⌀6.0 mm, black, 500pcs.
When used in conjunction with a cable tie, the Weld Stud Mount significantly reduces time and labor, and eliminates the need for multiple sized P-clamps, nuts, and bolts.
Compare
Cable tie mount for stud, Wmax=13.0mm, ⌀6.0 mm, black, 500pcs.
WSM6-PA66HIRHSW-BK 151-00146
Compare
Add to watchlist
500 pcs.
Black (BK) WSM6-PA66HIRHSW-BK 151-00146
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.7 mm, #1/4" (M6) Screw, black, 500pcs.
Low profile design allows mount to be placed in areas where space is limited.
Compare
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.7 mm, #1/4" (M6) Screw, black, 500pcs.
LPM25-PA66HIRHSUV-BK 151-01122
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) LPM25-PA66HIRHSUV-BK 151-01122
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35mm, natural, 100pcs.
T30R-PA66-NA 111-03219
Compare
Add to watchlist
100 pcs.
Natural (NA) T30R-PA66-NA 111-03219
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
T120M-PA66-NA 111-12619
Compare
Add to watchlist
100 pcs.
Natural (NA) T120M-PA66-NA 111-12619
Stainless steel cable tie, punch lock, 360x5.9mm, ⌀5-100mm, metal, 100pcs.
Metal cable ties MST-Series.
Compare
Stainless steel cable tie, punch lock, 360x5.9mm, ⌀5-100mm, metal, 100pcs.
MST360S-SS304-ML 111-01550
Compare
Add to watchlist
100 pcs.
Metal (ML) MST360S-SS304-ML 111-01550
Stainless steel cable tie, punch lock, 509x8.9mm, ⌀8-145mm, metal, 50pcs.
Metal cable ties MST-Series.
Compare
Stainless steel cable tie, punch lock, 509x8.9mm, ⌀8-145mm, metal, 50pcs.
MST500M-SS304-ML 111-01632
Compare
Add to watchlist
50 pcs.
Metal (ML) MST500M-SS304-ML 111-01632
Cable tie not serrated vibration absorbing, 500x8.0mm, ⌀152.0mm, natural, 50pcs.
Cable Ties KR-Series.
Compare
Cable tie not serrated vibration absorbing, 500x8.0mm, ⌀152.0mm, natural, 50pcs.
KR8/50-PA66-NA 121-05019
Compare
Add to watchlist
50 pcs.
Natural (NA) KR8/50-PA66-NA 121-05019
Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.
Compare
Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50REC9-PA66HS/PA66HIRHS-BK 156-02678
Compare
Add to watchlist
500 pcs.
Black (BK) T50REC9-PA66HS/PA66HIRHS-BK 156-02678
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66W-BK 111-12060
Compare
Add to watchlist
100 pcs.
Black (BK) T120R(E)-PA66W-BK 111-12060
Cable tie inside serrated, 100.0x2.5mm, ⌀1.0-22.0mm, red, 1000pcs.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.0-22.0mm, red, 1000pcs.
T18R-PA66-RD 111-00658
Compare
Add to watchlist
1000 pcs.
Red (RD) T18R-PA66-RD 111-00658
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
Compare
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
T50R-PA46-GY 111-00824
Compare
Add to watchlist
100 pcs.
Grey (GY) T50R-PA46-GY 111-00824
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie not serrated vibration absorbing, 38.0x11.7mm, natural, 200pcs.
Cable Tie Mounts KR8
Compare
Cable tie not serrated vibration absorbing, 38.0x11.7mm, natural, 200pcs.
KR8/C5-PA66HS-NA 121-58551
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Natural (NA) KR8/C5-PA66HS-NA 121-58551
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, ⌀2.0-45.0mm, black, 500pcs.
Reusable fastener can be removed from threaded or non-threaded holes using a 5/16
Compare
Fixing tie for edge, ⌀2.0-45.0mm, black, 500pcs.
T50RDHEC5A-PA66HS/PA66HIRHS-BK 156-01007
Compare
Add to watchlist
500 pcs.
Black (BK) T50RDHEC5A-PA66HS/PA66HIRHS-BK 156-01007
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
MBT5S-SS316L-ML 111-93059
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT5S-SS316L-ML 111-93059
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FlexTack FMB for round and angled surfaces
Compare
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FMB4APT-A-PA66HS-BK 151-02219
Compare
Add to watchlist
100 pcs.
Black (BK) FMB4APT-A-PA66HS-BK 151-02219
Cable tie not serrated, 50.0mx8.0mm, black, 50.0m
Cable tie KR8S1.
Compare
Cable tie not serrated, 50.0mx8.0mm, black, 50.0m
KR8/S1-PA66W-BK 121-98160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 reel
Black (BK) KR8/S1-PA66W-BK 121-98160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Compare
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
T18MR-PA66-NA 113-01819
Compare
Add to watchlist
100 pcs.
Natural (NA) T18MR-PA66-NA 113-01819
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
Compare
Add to watchlist
160 pcs.
Black (BK) RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, ball bearing lock, 201.0x7.9mm, ⌀12.0-50.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 201.0x7.9mm, ⌀12.0-50.0mm, metal, 50pcs.
MBT8H-SS316L-ML 111-94089
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT8H-SS316L-ML 111-94089
Cable tie inside serrated, 100.0x2.5mm, ⌀1.0-22.0mm, blue, 1000pcs.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.0-22.0mm, blue, 1000pcs.
T18R-PA66-BU 111-00644
Compare
Add to watchlist
1000 pcs.
Blue (BU) T18R-PA66-BU 111-00644
Cable tie mount for hole (round), Wmax=5.0mm, T=0.7-2.6mm, ⌀6.0 - 7.5 mm, natural, 100pcs.
Compare
Cable tie mount for hole (round), Wmax=5.0mm, T=0.7-2.6mm, ⌀6.0 - 7.5 mm, natural, 100pcs.
PM7-PA66-NA 151-00574
Compare
Add to watchlist
100 pcs.
Natural (NA) PM7-PA66-NA 151-00574
Cable tie inside serrated, 148.0x3.6mm, ⌀1.5-35.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 148.0x3.6mm, ⌀1.5-35.0mm, black, 1000pcs.
T30R-PA66-BK 111-03034
Compare
Add to watchlist
1000 pcs.
Black (BK) T30R-PA66-BK 111-03034
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, natural, 50pcs.
Compare
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, natural, 50pcs.
KR8/33-PA66HS-NA 121-83355
Compare
Add to watchlist
50 pcs.
Natural (NA) KR8/33-PA66HS-NA 121-83355
Cable clip for hole (round), ⌀6.3 mm, Dmin=13.7mm, Dmax=14.7mm
Clips interlock for additional installation options.
Compare
Cable clip for hole (round), ⌀6.3 mm, Dmin=13.7mm, Dmax=14.7mm
IPC15AH-PA66-BK 151-14500
Compare
Add to watchlist
100 pcs.
Black (BK) IPC15AH-PA66-BK 151-14500
Cable clip for hole (round), ⌀4.7 mm, Dmax=3.5mm
Compare
Cable clip for hole (round), ⌀4.7 mm, Dmax=3.5mm
PC35LAH-PA66-BK 151-14700
Compare
Add to watchlist
100 pcs.
Black (BK) PC35LAH-PA66-BK 151-14700
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7 for simple and secure installation of corrugated tubing.
Compare
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7-PA66HIRHSUV-BK 151-14303
Compare
Add to watchlist
1000 pcs.
Black (BK) PC15FT7-PA66HIRHSUV-BK 151-14303
Fixing tie with pipe/tube holder, inside serrated, ⌀13.5-15.8mm, black, 3000
The bi-directional saddle design allows the bundles to be coupled parallel or perpendicular to one another.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀13.5-15.8mm, black, 3000
T50RMOC14SAD-SET-PA66HIRHSUV-BK 156-01817
Compare
Add to watchlist
3000
Black (BK) T50RMOC14SAD-SET-PA66HIRHSUV-BK 156-01817
Fixing tie with pipe/tube holder, inside serrated, ⌀23.0-29.0mm, black, 1000pcs.
The bi-directional saddle design allows the bundles to be coupled parallel or perpendicular to one another.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀23.0-29.0mm, black, 1000pcs.
T50RMOC26SAD-SET-PA66HIRHSUV-BK 156-01821
Compare
Add to watchlist
1000 pcs.
Black (BK) T50RMOC26SAD-SET-PA66HIRHSUV-BK 156-01821
Cable tie inside serrated, 100.0x2.5mm, ⌀1.0-22.0mm, yellow, 1000pcs.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.0-22.0mm, yellow, 1000pcs.
T18R-PA66-YE 111-00662
Compare
Add to watchlist
1000 pcs.
Yellow (YE) T18R-PA66-YE 111-00662
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 100pcs.
T50I-PA66-BK 111-00444
Compare
Add to watchlist
100 pcs.
Black (BK) T50I-PA66-BK 111-00444
Cable tie inside serrated, 100x2.5mm, ⌀1.5-22.0mm, natural, 1000pcs.
Compare
Cable tie inside serrated, 100x2.5mm, ⌀1.5-22.0mm, natural, 1000pcs.
T18R-PA46-NA 114-01879
Compare
Add to watchlist
1000 pcs.
Natural (NA) T18R-PA46-NA 114-01879
Hook and loop cable tie, 5000x5mm, black, 1pc.
Compare
Hook and loop cable tie, 5000x5mm, black, 1pc.
GTRS-PA-BK 130-00074
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1 pc.
Black (BK) GTRS-PA-BK 130-00074
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip, black, 1000pcs.
Compare
Connector clip, black, 1000pcs.
CC4AHOVAL7X12-PA66HIRHSUV-BK 151-02563
Compare
Add to watchlist
1000 pcs.
Black (BK) CC4AHOVAL7X12-PA66HIRHSUV-BK 151-02563
Bundling clip for stud, SO=47.0 x 23.0mm, silver, 1000pcs.
Compare
Bundling clip for stud, SO=47.0 x 23.0mm, silver, 1000pcs.
SOC40OS20PHOVAL-PPS-SR 133-04258
Compare
Add to watchlist
1000 pcs.
Silver (SR) SOC40OS20PHOVAL-PPS-SR 133-04258
Cable clip, ⌀3.2 mm, Dmax=3.0mm
Fixing clip TY8H1(S) - screw fix or self adhesive.
Compare
Cable clip, ⌀3.2 mm, Dmax=3.0mm
TY8H1-PA66-NA 151-22819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) TY8H1-PA66-NA 151-22819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm
MOC12FT6.5-PA66HIRHSUV-BK 151-01758
Compare
Add to watchlist
2000
Black (BK) MOC12FT6.5-PA66HIRHSUV-BK 151-01758
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=17.0mm, Dmax=21.8mm, nom⌀=19.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=17.0mm, Dmax=21.8mm, nom⌀=19.0 mm
MOC19FT6.5-PA66HIRHSUV-BK 151-01788
Compare
Add to watchlist
3000 pcs.
Black (BK) MOC19FT6.5-PA66HIRHSUV-BK 151-01788
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Compare
Add to watchlist
1000 pcs.
Black (BK) MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Cable clip, T=0.6 - 4.0mm, ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=25.0mm, Dmax=30.0mm, nom⌀=25.0 - 30.0 mm
Compare
Cable clip, T=0.6 - 4.0mm, ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=25.0mm, Dmax=30.0mm, nom⌀=25.0 - 30.0 mm
LOC25-30FT6.5-PA66HIRHSUV-BK 151-02904
Compare
Add to watchlist
1000
Black (BK) LOC25-30FT6.5-PA66HIRHSUV-BK 151-02904
Cable tie mount for hole (round), Wmax=6.5mm, ⌀6.4 mm, black, 2000pcs.
Securely fix and route cables and pipes with SFC3.
Compare
Cable tie mount for hole (round), Wmax=6.5mm, ⌀6.4 mm, black, 2000pcs.
SFC3-F-PA66UV-BK 151-00340
Compare
Add to watchlist
2000 pcs.
Black (BK) SFC3-F-PA66UV-BK 151-00340
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Compare
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA66-NA 111-00564
Compare
Add to watchlist
100 pcs.
Natural (NA) T50R-PA66-NA 111-00564
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
T50R-PA66HSUV-BK 111-04907
Compare
Add to watchlist
1000 pcs.
Black (BK) T50R-PA66HSUV-BK 111-04907
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 1000pcs.
T50I-PA66-BK 111-05216
Compare
Add to watchlist
1000 pcs.
Black (BK) T50I-PA66-BK 111-05216
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
T120L-PA66W-BK 111-12430
Compare
Add to watchlist
50 pcs.
Black (BK) T120L-PA66W-BK 111-12430
Stainless steel cable tie, ball bearing lock, 838x16.0mm, ⌀25-120mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 838x16.0mm, ⌀25-120mm, metal, 50pcs.
MBT33UHD-SS316L-ML 111-01313
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33UHD-SS316L-ML 111-01313
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, natural, 25pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, natural, 25pcs.
T150L-PA66-NA 111-15400
Compare
Add to watchlist
25 pcs.
Natural (NA) T150L-PA66-NA 111-15400
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 100pcs.
T50I-PA66-BK 111-05215
Compare
Add to watchlist
100 pcs.
Black (BK) T50I-PA66-BK 111-05215
Cable tie inside serrated, 160.0x4.6mm, ⌀1.5-35.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 160.0x4.6mm, ⌀1.5-35.0mm, black, 1000pcs.
T50S-PA66-BK 111-05808
Compare
Add to watchlist
1000 pcs.
Black (BK) T50S-PA66-BK 111-05808
Cable tie inside serrated, 80x2.2mm, ⌀1.0-16.0mm, yellow, 1000pcs.
Compare
Cable tie inside serrated, 80x2.2mm, ⌀1.0-16.0mm, yellow, 1000pcs.
T18S-PA66-YE 111-00679
Compare
Add to watchlist
1000 pcs.
Yellow (YE) T18S-PA66-YE 111-00679
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 50pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 50pcs.
T150L-PA66-BK 111-15404
Compare
Add to watchlist
50 pcs.
Black (BK) T150L-PA66-BK 111-15404
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, red, 25pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, red, 25pcs.
T150L-PA66-RD 111-15407
Compare
Add to watchlist
25 pcs.
Red (RD) T150L-PA66-RD 111-15407
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, natural, 100pcs.
T30L-PA66-NA 111-00558
Compare
Add to watchlist
100 pcs.
Natural (NA) T30L-PA66-NA 111-00558

Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  YouTube  Link Corporate Blog  Instagram  X  LinkedIn 
Contact General Terms of Sale and Supply Imprint Guidelines and commitments Privacy Policy Newsletter
Update: 16/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Update: 16/08/2025 | Privacy Settings
Contact