EPS-300 - 3:1 shrink ratio
Art.-Nr. 340-06021 | EPS-300-6/2-PO-X-BK | Details

EPS300 and EPS400 offer high shrink ratios and protection against humidity.

Flexible, thin wall polyolefin heat shrink tubing
With coextruded hot melt adhesive inner wall
Protects against moisture
Provides an environmental sealing of complex parts

Package size

1.2 m

50 m

300 m

You have selected a different package size. The displayed product may differ slightly from the original product. You can see possible differences here in comparison.

Add to watchlist

Request your individual offer now

Request quote

More products in this product group:

Heat shrinkable tubing adhesive lined >

Base Data
Product Dimensions

Base Data

Application	Heatshrinable tubing EPS seals and protects a wide variety of electrical applications like back end connector sealing, connector-to-cable transitions and splices.
Application Tool	H6100
Behaviour At Low Temperature	not cracking
Behaviour at low Temperature test method	IEC 60684-2
Colour	Black (BK)
Heat Shock Elongation	480%
Heat Shock Tensile Strength	12MPa
Heat Shock Test	4h/200°C
Heat shock test test method	IEC 60684-2
Material	Polyolefin, cross-linked (PO-X)
Pack Cont.	1.2m
Package Content packed in	lengths
PART DESCRIPTION	EPS-300-6/2-PO-X-BK
Printable	No
Product Family	EPS-300 - 3:1 shrink ratio
Product Group	Heat shrinkable tubing adhesive lined
Shrink Ratio	3:1
Variant	Thin-Wall
With inner glue (Yes/No)	Yes

Product Dimensions


Longitudinal Change After Shrinkage	-5% max.
Recov. ∅ d max.	2.0mm
Supplied ∅ D min.	6.0mm
Thickness of Adhesive (TA) nom.	0.50mm
Wall (WT)	1.00mm

Specifications

Adhesive	Hot melt adhesive
Dielectric Strength	45kV/mm
Dielectric Strength test method	IEC 60684-2
Elongation at break	450%
Elongation at break test method	IEC 60684-2
Halogen-free	No
Min. Shrink Temperature - °C	+120 °C
Operating Temperature	-55 °C to +125 °C
Self extinguishing	Yes
Softening Point Adhesive	+90 °C
Specifications
Specifications	SAE - AMS - DTL-23053/4
Tensile Strength	14MPa
Tensile Strength test method	IEC 60684-2
Test Method Tensile Strength	IEC 60684-2
UL Recognized (US and Canada)	No
Volume Resistance	10¹² Ω cm

Logistics and Packaging

Country of Origin	NL
GTIN-13 / EAN	5022660479243
Reel Length	300.0m

More Information

ETIM 7.0 Key	EC000217
ETIM 8.0 Key	EC000217
ETIM 9.0 Key	EC000217
UNSPSC Key	39121723

Calculators

Calculator tool for Heat Shrink Tubing

Calculator tool for Heat Shrink Tubing

for EPS-300-6/2 - Art.-Nr.: 340-06021
In selecting the right shrink tubing size it is important to consider to "80:20 rule". Shrink tubing should recover at least 20% and maximum 80% of its potential shrink range.
No information available. An Alternative suitable shrink ratio has been suggested

According to which specification would you like to check if the selected product is suitable for your application?

diameter

Please enter either the smallest and/or the largest outer diameter of the substrate.

Min mm Max mm

Cross-Section

Please enter either the smallest and/or largest cross-section of the object to be covered.

Min mm² Max mm²

perimeter

Please enter either the smallest and/or largest perimeter of the object to be covered.

Min mm Max mm
Wall thickness calculator

Wall thickness calculator

for EPS-300-6/2 - Art.-Nr.: 340-06021

Depending on the substrate dimensions when Heat shrink tubing is recovered the diameter and the wall thickness will change. This Calculator aims to offer a theoretical wall thickness for this situation.Please enter the outer diameter of the object to be covered

Outer diameter of object (A)

mm

Inner diameter of tubing after shrinking (B)

mm

Wall thickness fully recovered ( C )

mm