Results for "HP-Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.

Compare

NX14-PA66-BK 221-10140

Compare

Add to watchlist

Compare

P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX14-PA66-BK 221-10140

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H8P-PA66HS-BK 211-60007

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H8P-PA66HS-BK 211-60007

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H10P-PA66HS-BK 211-60009

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H10P-PA66HS-BK 211-60009

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H9P-PA66HS-BK 211-60008

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H9P-PA66HS-BK 211-60008

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H1P-PA66HS-BK 211-60000

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H1P-PA66HS-BK 211-60000

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H7P-PA66HS-BK 211-60006

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H7P-PA66HS-BK 211-60006

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H14P-PA66-NA 211-60149

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) H14P-PA66-NA 211-60149

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H16P-PA66-NA 211-60169

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) H16P-PA66-NA 211-60169

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H18P-PA66-NA 211-60189

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.

Compare

Add to watchlist

250 pcs.

Natural (NA) H18P-PA66-NA 211-60189

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H3P-PA66HS-BK 211-60002

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H3P-PA66HS-BK 211-60002

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H6P-PA66HS-BK 211-60005

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H6P-PA66HS-BK 211-60005

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H11P-PA66-NA 211-60119

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H11P-PA66-NA 211-60119

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H12P-PA66-NA 211-60129

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H12P-PA66-NA 211-60129

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H13P-PA66-NA 211-60139

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) H13P-PA66-NA 211-60139

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H15P-PA66-NA 211-60159

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) H15P-PA66-NA 211-60159

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H2P-PA66HS-BK 211-60001

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H2P-PA66HS-BK 211-60001

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H4P-PA66HS-BK 211-60003

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H4P-PA66HS-BK 211-60003

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H5P-PA66HS-BK 211-60004

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H5P-PA66HS-BK 211-60004

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H8P-PA66-NA 211-60089

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H8P-PA66-NA 211-60089

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H9P-PA66-NA 211-60099

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H9P-PA66-NA 211-60099

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H6P-PA66-NA 211-60069

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H6P-PA66-NA 211-60069

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H1P-PA66-NA 211-60019

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H1P-PA66-NA 211-60019

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H5P-PA66-NA 211-60059

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H5P-PA66-NA 211-60059

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H3P-PA66-NA 211-60039

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H3P-PA66-NA 211-60039

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H4P-PA66-NA 211-60049

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H4P-PA66-NA 211-60049

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H2P-PA66-NA 211-60029

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H2P-PA66-NA 211-60029

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "HP-Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Cable Ties and Fixings

Cable Ties and Fixings

Cable Ties and Fixings

Cable ties have to be able to meet the most varied demands these days as they are used in the widest range of operations – from the simple bundling of cables with cable ties to the absolutely specific use of cable ties under extreme conditions.

Cable Ties

Cable management for high temperature applications

Cable management for high temperature applications

Cable management for high temperature applications

High temperature is a key issue for many industries. We can replace metal with plastics such as PA46, PEEK and E/TFE (Tefzel®) – even in applications involving a high operating temperature and without compromising on quality and performance. Find out more about HellermannTyton’s expertise in injection-moulded cable management solutions made from high-performance, high-end thermoplastic. Get in touch with us! Your suggestions might be our inspiration for a new product to meet the demands of your application.

Cable management high temperature applications

Cable clips

Cable clips

Cable clips for industrial applications

From adhesive cable clips to wire clips for parallel routing or fluid management: Discover our product portfolio here.

Cable clips

Cable clips for edges: fasten cables without drilling

The EdgeClip is a cable-fastening solution that enables the flexible routing of wires, cable harnesses, conduits and pipes in a variety of industrial applications, including the automotive sector.

Cable clips for edges

‹ › ×