Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
18/09/2025

Results for "HFTP 48"

239 products found 1 further hit
Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (155)

Cable Ties Inside Serrated  (50) Cable Ties Outside Serrated  (6) Cable Ties Without Serration  (2) Cable Ties, Releasable  (4) Cable Ties, Stainless Steel  (1) Cable Ties With Fixing Elements  (40) Cable Tie Mounts  (15) Fixing Elements  (7) Clips, Clamps and Plugs  (36)
Cable Ties and Fixings
Cable Ties and Fixings (155)
Insulation

Insulation  (32)

Heat Shrink Tubing  (29) Heat Shrinkable Moulded Shapes  (4)
Insulation
Insulation (32)
Cable Protection Systems

Cable Protection Systems  (46)

Spiral-Reinforced Conduit Systems  (2) Protective Tubing and Spiral Binding  (17) Expandable Braided Sleeves  (18) Open Woven Sleeves  (19) Electromagnetic Shielding Sleeves  (1) Edge Protection  (1) Grommets  (2) Wiring Ducts and Accessories  (7)
Cable Protection Systems
Cable Protection Systems (46)
Identification Systems

Identification Systems  (1)

Wire and Cable Markers  (1)
Identification Systems
Identification Systems (1)
Application Tooling

Application Tooling  (5)

Application Tooling for Cable Ties  (3) Application Tooling for Braided Sleeves  (2)
Application Tooling
Application Tooling (5)
239 products
Reset all
Corrugated tube clip for screw fixation/with pipe/tube holder, black, 700pcs.
Conduit clamp is releasable to allow for maintenance.
Compare
Corrugated tube clip for screw fixation/with pipe/tube holder, black, 700pcs.
CDC13R40.5M10-PA66-BK 133-03437
Compare
Add to watchlist
700 pcs.
Black (BK) CDC13R40.5M10-PA66-BK 133-03437
Cable tie mount for screw fixation, ⌀11.2 - 20.8 mm, black, 500pcs.
Secures up to three bundles for multiple routing.
Compare
Cable tie mount for screw fixation, ⌀11.2 - 20.8 mm, black, 500pcs.
MSBT120-PA66HIRHS-BK 151-29301
Compare
Add to watchlist
500 pcs.
Black (BK) MSBT120-PA66HIRHS-BK 151-29301
Spiral reinforced conduit, nom⌀56mm, OD=56.0mm, ID=48.0mm, grey, 10m
Compare
Spiral reinforced conduit, nom⌀56mm, OD=56.0mm, ID=48.0mm, grey, 10m
FG56-PVC/ST-GY 167-00248
Compare
Add to watchlist
10 metre
Grey (GY) FG56-PVC/ST-GY 167-00248
Cable tie outside serrated, 145.0x3.4mm, ⌀1.6-35.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Compare
Cable tie outside serrated, 145.0x3.4mm, ⌀1.6-35.0mm, black, 100pcs.
T30ROS-PA66HS-BK 118-04800
Compare
Add to watchlist
100 pcs.
Black (BK) T30ROS-PA66HS-BK 118-04800
Wiring duct, narrow fingers, 25x80mm, L=2m, grey, 48m
HelaDuct HTWD-PN - narrow finger wiring duct.
Compare
Wiring duct, narrow fingers, 25x80mm, L=2m, grey, 48m
HTWD-PN-25X80-PVC-GY 184-10198
Compare
Add to watchlist
48 m
Grey (GY) HTWD-PN-25X80-PVC-GY 184-10198
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
Fixing bracket for an oval hole with a seal for protection against e.g. dust and splash water.
Compare
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
T60SOSSFT62x122-E-MD-PA66HS-BK 126-00080
Compare
Add to watchlist
500 pcs.
Black (BK) T60SOSSFT62x122-E-MD-PA66HS-BK 126-00080
Fixing tie for hole (round), inside serrated, ⌀7.0-45.0mm, black, 500pcs.
T80RSFT - The 'tab' on the head of the tie makes it easy to locate and lift the head for assembly.
Compare
Fixing tie for hole (round), inside serrated, ⌀7.0-45.0mm, black, 500pcs.
T80RSFT-PA66HS-BK 150-15493
Compare
Add to watchlist
500 pcs.
Black (BK) T80RSFT-PA66HS-BK 150-15493
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, black, 500pcs.
Wing design helps stabilize the cable tie in high vibration applications.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, black, 500pcs.
T50SSL5-PA66HS-BK 126-02204
Compare
Add to watchlist
500 pcs.
Black (BK) T50SSL5-PA66HS-BK 126-02204
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.
1-Piece Fixing Tie with Arrowhead.
Compare
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.
T80RSF6.5F-PA66HS-BK 126-02600
Compare
Add to watchlist
1000 pcs.
Black (BK) T80RSF6.5F-PA66HS-BK 126-02600
Fixing tie for hole (round), inside serrated, ⌀1.6-32.0mm, natural, 100pcs.
The arrowhead design of this push mount inserts easily and locks securely in place. 
Compare
Fixing tie for hole (round), inside serrated, ⌀1.6-32.0mm, natural, 100pcs.
T30RSF(U)-PA66-NA 111-85603
Compare
Add to watchlist
100 pcs.
Natural (NA) T30RSF(U)-PA66-NA 111-85603
Fixing tie for hole (round), inside serrated, ⌀1.6-32.0mm, black, 100pcs.
Fixing tie for round holes with Arrowhead.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.6-32.0mm, black, 100pcs.
T30RSF(U)-PA66HS-BK 111-85610
Compare
Add to watchlist
100 pcs.
Black (BK) T30RSF(U)-PA66HS-BK 111-85610
Fixing tie for hole (round), ⌀1.5-50.0mm, black, 100pcs.
Compare
Fixing tie for hole (round), ⌀1.5-50.0mm, black, 100pcs.
RT50RSF-PA66-BK 115-07010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RT50RSF-PA66-BK 115-07010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), inside serrated, ⌀6.0-50.0mm, black, 1000pcs.
Arrowhead mount cable tie features an extended pawl to release the tie for bundle maintenance.
Compare
Fixing tie for hole (round), inside serrated, ⌀6.0-50.0mm, black, 1000pcs.
RT50SFK-PA66-BK 115-06960
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) RT50SFK-PA66-BK 115-06960
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), ⌀1.5-48.0mm, black, 100pcs.
Compare
Fixing tie for hole (round), ⌀1.5-48.0mm, black, 100pcs.
RT50RSF-PA66W-BK 115-00076
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RT50RSF-PA66W-BK 115-00076
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), inside serrated, ⌀1.5-20.0mm, black, 500pcs.
Fir tree mounts are equipped with a friction tab that will hold the tie in the mount, allowing them to be preassembled prior to installation.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.5-20.0mm, black, 500pcs.
T18RDP5-PA66-BK 150-55610
Compare
Add to watchlist
500 pcs.
Black (BK) T18RDP5-PA66-BK 150-55610
Fixing tie for hole (round), inside serrated, ⌀10.0-40.0mm, black, 100pcs.
FT220DP7-N66-BK.
Compare
Fixing tie for hole (round), inside serrated, ⌀10.0-40.0mm, black, 100pcs.
FT220DP7-PA66-BK 150-01700
Compare
Add to watchlist
100 pcs.
Black (BK) FT220DP7-PA66-BK 150-01700
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSSBH5SD-PA66HS-BK 156-05905
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSSBH5SD-PA66HS-BK 156-05905
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSBS5-PA66HS-BK 150-21299
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSSBS5-PA66HS-BK 150-21299
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 500pcs.
Compare
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 500pcs.
T50RSBS5-PA66HS-BK 150-21291
Compare
Add to watchlist
500 pcs.
Black (BK) T50RSBS5-PA66HS-BK 150-21291
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for side cable routing.
Compare
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC24-PA66HS/PA66HIRHS-BK 156-00007
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC24-PA66HS/PA66HIRHS-BK 156-00007
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, natural/grey, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Compare
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, natural/grey, 500pcs.
T30RFT5-PA46-NA/GY 150-55948
Compare
Add to watchlist
500 pcs.
Natural (NA), Grey (GY) T30RFT5-PA46-NA/GY 150-55948
Fixing tie for hole (round), inside serrated, ⌀5.0-30.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-30.0mm, black, 500pcs.
T30RFT6LG-PA66HS/PA66HIRHS-BK 150-31090
Compare
Add to watchlist
500 pcs.
Black (BK) T30RFT6LG-PA66HS/PA66HIRHS-BK 150-31090
Fixing tie for hole (round), inside serrated, ⌀3.0-19.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Compare
Fixing tie for hole (round), inside serrated, ⌀3.0-19.0mm, black, 500pcs.
T50RDHFT6-PA66HS/PA66HIRHS-BK 150-77936
Compare
Add to watchlist
500 pcs.
Black (BK) T50RDHFT6-PA66HS/PA66HIRHS-BK 150-77936
Releasable cable tie, 250x7.6mm, ⌀16.0-68.0mm, 200N, natural, 100pcs.
Compare
Releasable cable tie, 250x7.6mm, ⌀16.0-68.0mm, 200N, natural, 100pcs.
REL250-PA66-NA 131-22519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) REL250-PA66-NA 131-22519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 215.9x4.0mm, ⌀1.5-51.0mm, 180N, natural, 100pcs.
Releasable cable tie features a head design with extended pawl for quick release of bundles.
Compare
Releasable cable tie, 215.9x4.0mm, ⌀1.5-51.0mm, 180N, natural, 100pcs.
RT40R-PA66-NA 115-06219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RT40R-PA66-NA 115-06219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 1030.0x12.5mm, ⌀12.0-305.0mm, 1115N, black, 25pcs.
Releasable cable tie features a head design with extended pawl for quick release of bundles.
Compare
Releasable cable tie, 1030.0x12.5mm, ⌀12.0-305.0mm, 1115N, black, 25pcs.
RT250XL-PA66-BK 131-75510
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) RT250XL-PA66-BK 131-75510
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Hook and loop cable tie, 200x12.5mm, Dmax=60.0mm, black, 10pcs.
TEXTIE M Black quick and simple re-usable
Compare
Hook and loop cable tie, 200x12.5mm, Dmax=60.0mm, black, 10pcs.
TEXTIE M-PA66/PP-BK 130-00013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
10 pack
Black (BK) TEXTIE M-PA66/PP-BK 130-00013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated, 200.0x3.4mm, ⌀1.6-50.0mm, black, 100pcs.
Compare
Cable tie outside serrated, 200.0x3.4mm, ⌀1.6-50.0mm, black, 100pcs.
T30LOS-PA66HS-BK 118-04900
Compare
Add to watchlist
100 pcs.
Black (BK) T30LOS-PA66HS-BK 118-04900
Cable tie outside serrated, 384.0x4.6mm, ⌀1.6-110.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Compare
Cable tie outside serrated, 384.0x4.6mm, ⌀1.6-110.0mm, black, 100pcs.
T50LOS-PA66HS-BK 118-05900
Compare
Add to watchlist
100 pcs.
Black (BK) T50LOS-PA66HS-BK 118-05900
Cable tie outside serrated, 245.0x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Compare
Cable tie outside serrated, 245.0x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
T50MOS-PA66HS-BK 118-00018
Compare
Add to watchlist
100 pcs.
Black (BK) T50MOS-PA66HS-BK 118-00018
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Compare
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.
DCT11-PA66HIRHSUV-BK 115-31100
Compare
Add to watchlist
50 pcs.
Black (BK) DCT11-PA66HIRHSUV-BK 115-31100
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Mount can be used in a wide variety of applications where 5mm weld studs or 5mm ISO bolts.
Compare
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T50SSBS5OT-E-PA66HS-BK 155-30602
Compare
Add to watchlist
500 pcs.
Black (BK) T50SSBS5OT-E-PA66HS-BK 155-30602
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
One-piece cable tie with oval stud mount.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSSB6HE-PA66HS-BK 155-46302
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSB6HE-PA66HS-BK 155-46302
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fixing tie to use on studs and several parts of this product can be fixed on one welding stud due to the flat geometry.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSWSP5E-2-PA66HS-BK 133-01553
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSWSP5E-2-PA66HS-BK 133-01553
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Compare
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC12E-PA66HS-BK 148-00200
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSEC12E-PA66HS-BK 148-00200
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.
Compare
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC13E-PA66HS-BK 126-00000
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSEC13E-PA66HS-BK 126-00000
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 500pcs.
T50RFT6LG-PA66HS/PA66HIRHS-BK 150-31091
Compare
Add to watchlist
500 pcs.
Black (BK) T50RFT6LG-PA66HS/PA66HIRHS-BK 150-31091
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
Staggered fir tree branch design provides low insertion forces and high extraction forces.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Compare
Add to watchlist
1000 pcs.
Black (BK) T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Fixing tie for hole (round), inside serrated, ⌀2.0-45.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
Fixing tie for hole (round), inside serrated, ⌀2.0-45.0mm, black, 500pcs.
T50RSFT6.5-PA66HS-BK 156-01697
Compare
Add to watchlist
500 pcs.
Black (BK) T50RSFT6.5-PA66HS-BK 156-01697
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Head allows for a 0.2
Compare
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Fixing tie for stud fixation and for multipile routing.
Compare
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Compare
Add to watchlist
500 pcs.
Black (BK) T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, black, 100pcs.
4-way cable tie entry for more installation options.
Compare
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, black, 100pcs.
MB3A-PA66-BK 151-28320
Compare
Add to watchlist
100 pcs.
Black (BK) MB3A-PA66-BK 151-28320
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
4-way cable tie entry for more installation options.
Compare
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
MB3A-PA66-WH 151-28349
Compare
Add to watchlist
100 pcs.
White (WH) MB3A-PA66-WH 151-28349
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.
Cable Tie Mounts MB and TY.
Compare
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.
MB4A-PA66-WH 151-28469
Compare
Add to watchlist
100 pcs.
White (WH) MB4A-PA66-WH 151-28469
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, black, 100pcs.
Cable Tie Mounts MB and TY.
Compare
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, black, 100pcs.
MB4A-PA66-BK 151-28412
Compare
Add to watchlist
100 pcs.
Black (BK) MB4A-PA66-BK 151-28412
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1 TY3G1S Natural Screw Fixing Cable Tie Mount
Compare
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1S-PA66-NA 151-11319
Compare
Add to watchlist
100 pcs.
Natural (NA) TY3G1S-PA66-NA 151-11319
Cable tie mount for hole (round), Wmax=9.3mm, ⌀5.9 - 6.4 mm, natural, 100pcs.
Cable tie mount for round holes with special designed two wedge footpart for high pull out forces.
Compare
Cable tie mount for hole (round), Wmax=9.3mm, ⌀5.9 - 6.4 mm, natural, 100pcs.
TY5K3-PA66HS-NA 152-11309
Compare
Add to watchlist
100 pcs.
Natural (NA) TY5K3-PA66HS-NA 152-11309
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, black, 100pcs.
CTM2-PA66-BK 151-30500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) CTM2-PA66-BK 151-30500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100mm, black, 250pcs.
Chassis-Fixing-Ties BHT375 for restricted space areas
Compare
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100mm, black, 250pcs.
BHT375-PA66HS-BK 150-37595
Compare
Add to watchlist
250 pcs.
Black (BK) BHT375-PA66HS-BK 150-37595
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100.0mm, black, 250pcs.
BHT375 - used for mounting cables via a single hole.
Compare
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100.0mm, black, 250pcs.
BHT375M-PA66HS-BK 150-47595
Compare
Add to watchlist
250 pcs.
Black (BK) BHT375M-PA66HS-BK 150-47595
Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, black, 50pcs.
Kabelrap tie offers a smooth strap providing secure assembly without damaging cables or hoses.
Compare
Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, black, 50pcs.
KR6/35-PA66UV-BK 121-63560
Compare
Add to watchlist
50 pcs.
Black (BK) KR6/35-PA66UV-BK 121-63560
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, natural, 50pcs.
Compare
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, natural, 50pcs.
KR8/33-PA66HS-NA 121-83355
Compare
Add to watchlist
50 pcs.
Natural (NA) KR8/33-PA66HS-NA 121-83355
Cable tie inside serrated detectable, 380.0x4.7mm, ⌀1.5-110.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 380.0x4.7mm, ⌀1.5-110.0mm, blue, 100pcs.
MCT50L-PA66MD-BU 111-00831
Compare
Add to watchlist
100 pcs.
Blue (BU) MCT50L-PA66MD-BU 111-00831
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀1.5-35.0mm, blue, 100pcs.
MCT Series cable ties are metal detectable, to minimize the risk of foreign object contamination.
Compare
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀1.5-35.0mm, blue, 100pcs.
MCT30R-PA66MD-BU 111-00829
Compare
Add to watchlist
100 pcs.
Blue (BU) MCT30R-PA66MD-BU 111-00829
Cable tie inside serrated detectable, 203.2x4.6mm, ⌀1.5-50.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 203.2x4.6mm, ⌀1.5-50.0mm, blue, 100pcs.
MCT50R-PA66MD-BU 111-00830
Compare
Add to watchlist
100 pcs.
Blue (BU) MCT50R-PA66MD-BU 111-00830
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Compare
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A-PEEK-BGE 118-00032
Compare
Add to watchlist
100 pcs.
Beige (BGE) PT2A-PEEK-BGE 118-00032
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
Extreme temperature range for excellent performance in a range of environments.
Compare
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
PT220-PEEK-BGE 111-01235
Compare
Add to watchlist
100 pcs.
Beige (BGE) PT220-PEEK-BGE 111-01235
Cable tie mount for screw fixation, Wmax=9mm, ⌀8.0 mm, M8 Screw, black, 500pcs.
S3SB15CBM8 and S3CBM8.
Compare
Cable tie mount for screw fixation, Wmax=9mm, ⌀8.0 mm, M8 Screw, black, 500pcs.
S3CBM8-PA6GF30-BK 151-01040
Compare
Add to watchlist
500 pcs.
Black (BK) S3CBM8-PA6GF30-BK 151-01040
Cable tie mount for cable bundles, Wmax=12.7mm, black, 50pcs.
H-profile of the saddles allows for broad surface contact with the bundle, which minimizes pinching and crushing of the bundle
Compare
Cable tie mount for cable bundles, Wmax=12.7mm, black, 50pcs.
DSWS5-PA66HS/PA46-BK 151-06502
Compare
Add to watchlist
50 pcs.
Black (BK) DSWS5-PA66HS/PA46-BK 151-06502
Cable tie tool for 4.5 - 16.0mm, manual, 0.514kg, grey
Compare
Cable tie tool for 4.5 - 16.0mm, manual, 0.514kg, grey
MK9SST-PA66GF30-GY 110-95000
Compare
Add to watchlist
1 pcs.
Grey (GY) MK9SST-PA66GF30-GY 110-95000
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Compare
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
T18MR-PA66-NA 113-01819
Compare
Add to watchlist
100 pcs.
Natural (NA) T18MR-PA66-NA 113-01819
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, black, 100pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles. 
Compare
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, black, 100pcs.
T30MR-PA66-BK 113-03010
Compare
Add to watchlist
100 pcs.
Black (BK) T30MR-PA66-BK 113-03010
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.
REL30SDP6.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.
REL30SDP6-PA66-BK 150-55500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) REL30SDP6-PA66-BK 150-55500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
T50SOSSFT6.5E-PA66HS-BK 126-03102
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSFT6.5E-PA66HS-BK 126-03102
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 1000pcs.
The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 1000pcs.
T50SST5-PA66-NA 126-02300
Compare
Add to watchlist
1000 pcs.
Natural (NA) T50SST5-PA66-NA 126-02300
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc and flat arrow head.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSKSFT6.5E-PA66HS-BK 126-00081
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSKSFT6.5E-PA66HS-BK 126-00081
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
The mount’s rounded tip allows for a smoother surface in case of contact with surrounding components or hands.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSKSFT5.4E-PA66HS-BK 126-00075
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSKSFT5.4E-PA66HS-BK 126-00075
Spiral wrap, nom⌀15mm, ⌀15-18mm, -30 °C to +100 °C, black, 1pc.
SPF - Black PP Heavy Duty Spiral Wrap.
Compare
Spiral wrap, nom⌀15mm, ⌀15-18mm, -30 °C to +100 °C, black, 1pc.
SPF15-PP-BK 162-20150
Compare
Add to watchlist
1 pc.
Black (BK) SPF15-PP-BK 162-20150
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 30/8 black
MA47 - Halogenfree 4:1 Medium Dual Wall Heat Shrink Tubing.
Compare
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 30/8 black
MA47-30/8-PO-X-BK 323-20300
Compare
Add to watchlist
20 pcs.
Black (BK) MA47-30/8-PO-X-BK 323-20300
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 40/12 black
MA47 - Halogenfree 4:1 Medium Dual Wall Heat Shrink Tubing.
Compare
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 40/12 black
MA47-40/12-PO-X-BK 323-20400
Compare
Add to watchlist
15 pcs.
Black (BK) MA47-40/12-PO-X-BK 323-20400
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 50/16 black
MA47 - Halogenfree 4:1 Medium Dual Wall Heat Shrink Tubing.
Compare
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 50/16 black
MA47-50/16-PO-X-BK 323-20500
Compare
Add to watchlist
8 pcs.
Black (BK) MA47-50/16-PO-X-BK 323-20500
Heat Shrinkable Tubing 2:1 flexible3.2/1.6 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible3.2/1.6 black
TF21-3.2/1.6-PO-X-BK 309-10320
Compare
Add to watchlist
300 metre
Black (BK) TF21-3.2/1.6-PO-X-BK 309-10320
Heat Shrinkable Tubing 2:1 flexible19.0/9.5 yellow
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible19.0/9.5 yellow
TF21-19.1/9.5-PO-X-YE 309-11904
Compare
Add to watchlist
50 metre
Yellow (YE) TF21-19.1/9.5-PO-X-YE 309-11904
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 green/yellow
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 green/yellow
TF21-25.4/12.7-PO-X-GNYE 309-12547
Compare
Add to watchlist
50 metre
Green-Yellow (GNYE) TF21-25.4/12.7-PO-X-GNYE 309-12547
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
TF24-19.1/9.5-PO-X-CL 309-31903
Compare
Add to watchlist
50 metre
Transparent (CL) TF24-19.1/9.5-PO-X-CL 309-31903
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
TF24-25.4/12.7-PO-X-CL 309-32543
Compare
Add to watchlist
50 metre
Transparent (CL) TF24-25.4/12.7-PO-X-CL 309-32543
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
TF24-38.1/19.1-PO-X-CL 309-33813
Compare
Add to watchlist
60 metre
Transparent (CL) TF24-38.1/19.1-PO-X-CL 309-33813
Heat Shrinkable Tubing 3:1 flexible 12/4 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Compare
Heat Shrinkable Tubing 3:1 flexible 12/4 black
TF31-12/4-PO-X-BK 333-21200
Compare
Add to watchlist
100 metre
Black (BK) TF31-12/4-PO-X-BK 333-21200
Heat Shrinkable Tubing 3:1 flexible 6/2 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 3:1 flexible 6/2 transparent
TF34-6/2-PO-X-CL 333-30603
Compare
Add to watchlist
30 metre
Transparent (CL) TF34-6/2-PO-X-CL 333-30603
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 24/8 black
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 24/8 black
TREDUX-24/8-PO-X-BK 319-02400
Compare
Add to watchlist
5 pcs.
Black (BK) TREDUX-24/8-PO-X-BK 319-02400
Heat Shrinkable Tubing 2:1 on a Reel 6,4/3,2 black
Compare
Heat Shrinkable Tubing 2:1 on a Reel 6,4/3,2 black
HIS-PACK-6.4/3.2-PO-X-BK 300-30640
Compare
Add to watchlist
1 pcs.
Black (BK) HIS-PACK-6.4/3.2-PO-X-BK 300-30640
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 black
Compare
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 black
HIS-PACK-19.1/9.5-PO-X-BK 300-31900
Compare
Add to watchlist
1 pcs.
Black (BK) HIS-PACK-19.1/9.5-PO-X-BK 300-31900
Bottle Shapes, VG style
150 Series boot recovered onto a connectors.
Compare
Bottle Shapes, VG style
152-42-HW8-PO-X-BK 401-52022
Compare
Add to watchlist
1 pcs.
Black (BK) 152-42-HW8-PO-X-BK 401-52022
Bottle Shapes, VG style
150 Series boot recovered onto a connectors.
Compare
Bottle Shapes, VG style
155-42-GW8-PO-X-BK 401-55017
Compare
Add to watchlist
1 pcs.
Black (BK) 155-42-GW8-PO-X-BK 401-55017
Bottle Shapes, VG style
150 Series boot recovered onto a connectors.
Compare
Bottle Shapes, VG style
158-43-HW17-PO-X-BK 401-58022
Compare
Add to watchlist
1 EA
Black (BK) 158-43-HW17-PO-X-BK 401-58022
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 9/3 black
Compare
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 9/3 black
HIS-A-9/3-PO-X-BK 308-10900
Compare
Add to watchlist
1 pcs.
Black (BK) HIS-A-9/3-PO-X-BK 308-10900
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 12/4 black
TA37 - adhesive lined tubing for safety sensitive areas.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 12/4 black
TA37 12-4-PO-X-BK 315-13004
Compare
Add to watchlist
25 pcs.
Black (BK) TA37 12-4-PO-X-BK 315-13004
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 19/6 black
TA37 - adhesive lined tubing for safety sensitive areas.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 19/6 black
TA37 19-6-PO-X-BK 315-13005
Compare
Add to watchlist
15 pcs.
Black (BK) TA37 19-6-PO-X-BK 315-13005
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 24/8 black
TA37 - adhesive lined tubing for safety sensitive areas.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 24/8 black
TA37 24-8-PO-X-BK 315-13006
Compare
Add to watchlist
15 pcs.
Black (BK) TA37 24-8-PO-X-BK 315-13006
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 40/13 black
TA37 - adhesive lined tubing for safety sensitive areas.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 40/13 black
TA37 40-13-PO-X-BK 315-13007
Compare
Add to watchlist
5 pcs.
Black (BK) TA37 40-13-PO-X-BK 315-13007
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 50/19 black
TA37 - adhesive lined tubing for safety sensitive areas.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 50/19 black
TA37 50-19-PO-X-BK 315-13008
Compare
Add to watchlist
4 pcs.
Black (BK) TA37 50-19-PO-X-BK 315-13008
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 75/25 black
TA37 - adhesive lined tubing for safety sensitive areas.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 75/25 black
TA37 75-25-PO-X-BK 315-13009
Compare
Add to watchlist
5 pcs.
Black (BK) TA37 75-25-PO-X-BK 315-13009
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 black
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 black
HFT-A-4.8/2.4-PO-X-BK 305-04800
Compare
Add to watchlist
300 metre
Black (BK) HFT-A-4.8/2.4-PO-X-BK 305-04800
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 black
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 black
HFT-A-9.5/4.8-PO-X-BK 305-09500
Compare
Add to watchlist
150 metre
Black (BK) HFT-A-9.5/4.8-PO-X-BK 305-09500
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 13/09/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.287) | Update: 13/09/2025 | Privacy Settings
Contact