27/07/2026

Results for "hard line high frequency" in Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

1,676 개의 제품을
모두 초기화
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
H2P-PA66HS-BK 211-60001
Compare
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
Compare
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
H4P-PA66HS-BK 211-60003
Compare
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
Compare
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H5P-PA66HS-BK 211-60004
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU11C-AL/CR-BK 211-15110
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU15C-AL/CR-BK 211-15150
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU20C-AL/CR-BK 211-15200
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU4-AL-NA 211-10040
Compare
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU5-AL-NA 211-10050
Compare
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU5C-AL/CR-BK 211-15050
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU6C-AL/CR-BK 211-15060
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU7C-AL/CR-BK 211-15070
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU9C-AL/CR-BK 211-15090
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Solar I-Beam Clips
Compare
IBBCLPSLR1-PA66HIRHSUV-BK 151-04320
Compare
Compare
Compare
250 pcs.
Black (BK) IBBCLPSLR1-PA66HIRHSUV-BK 151-04320
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCB180SM6SS-PA666V0/SS304-BK 151-02736
Compare
Compare
Compare
280 pcs.
Black (BK) RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
Compare
RCD15SM8SS-PA666V0/SS304-BK 151-03149
Compare
Compare
Compare
160
Black (BK) RCD15SM8SS-PA666V0/SS304-BK 151-03149
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 140pcs.
RCD180LM10.
Compare
RCD180LM10SS-PA666V0/SS304-BK 151-03007
Compare
RCD180LM10.
Compare
Compare
140
Black (BK) RCD180LM10SS-PA666V0/SS304-BK 151-03007
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCD180LM8SS-PA666V0/SS304-BK 151-02735
Compare
Compare
Compare
140 pcs.
Black (BK) RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 30°, black, 140pcs.
Compare
RCD30LM10SS-PA666V0/SS304-BK 151-03009
Compare
Compare
Compare
140
Black (BK) RCD30LM10SS-PA666V0/SS304-BK 151-03009
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Compare
RCD30LM8SS-PA666V0/SS304-BK 151-03145
Compare
Compare
Compare
140
Black (BK) RCD30LM8SS-PA666V0/SS304-BK 151-03145
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Compare
RCD30SM8SS-PA666V0/SS304-BK 151-03146
Compare
Compare
Compare
160
Black (BK) RCD30SM8SS-PA666V0/SS304-BK 151-03146
Connector clip for hole (round), black, 500pcs.
Connector Clips are available for many different connector types and fixing varieties.
Compare
FT6S-Y-CONN-TS-PA66HIRHS-BK 155-43702
Compare
Connector Clips are available for many different connector types and fixing varieties.
Compare
Compare
500 pcs.
Black (BK) FT6S-Y-CONN-TS-PA66HIRHS-BK 155-43702
Connector clip for hole (round), EWCAP-005-11, black, 500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
YCC-FT6-S-PA66HIRHS-BK 155-38102
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
500 pcs.
Black (BK) YCC-FT6-S-PA66HIRHS-BK 155-38102
Connector clip for hole (round), EWCAP-005-7, black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles
Compare
CCFT6LG-PA66HIRHS-BK 151-00785
Compare
Head design contains clamping rails to provide full circumferential compression around bundles
Compare
Compare
5000 pcs.
Black (BK) CCFT6LG-PA66HIRHS-BK 151-00785
Connector clip for hole (oval), EWCAP-005-11, natural, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
CCOVAL-PA66HIRHS-NA 151-01259
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
5000 pcs.
Natural (NA) CCOVAL-PA66HIRHS-NA 151-01259
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Compare
EC11-PA66HIRHS-BK 155-40602
Compare
Compare
Compare
1000 pcs.
Black (BK) EC11-PA66HIRHS-BK 155-40602
Ratchet O-Clamp
Compare
ROC18.5-22.5NXT -PA66HIRHSUV/SS-BK 151-04385
Compare
Compare
Compare
200 pcs.
Black (BK) ROC18.5-22.5NXT -PA66HIRHSUV/SS-BK 151-04385
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Compare
Halter SFT6.5-PA66HIRHS-BK 133-00067
Compare
Compare
Compare
1000 pcs.
Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067
Bundling clip, L=39.0mm, black, 500pcs.
Compare
ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Compare
Compare
Compare
500 pcs.
Black (BK) ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Compare
BC2212-PA66HIRHS-BK 151-00017
Compare
The slim line BC series is particularly compact and flexible.
Compare
Compare
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
SOC11FTOVAL-PA66HIRHS-NA 151-00932
Compare
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Compare
3000 pcs.
Natural (NA) SOC11FTOVAL-PA66HIRHS-NA 151-00932
Bundling clip for hole (round), L=55.0mm, black, 8000pcs.
Bundling Clip for round holes 6.5 mm.
Compare
TC2FT6LG-PA66HIRHS-BK 151-00827
Compare
Bundling Clip for round holes 6.5 mm.
Compare
Compare
8000 pcs.
Black (BK) TC2FT6LG-PA66HIRHS-BK 151-00827
Bundling clip for hole (round), L=55.0mm, natural, 8000pcs.
Bundling Clip for round holes 6.5 mm.
Compare
TC2FT6LG-PA66HIRHS-NA 151-00828
Compare
Bundling Clip for round holes 6.5 mm.
Compare
Compare
8000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00828
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
TC3FT6S-PA66HIRHS-BK 151-00028
Compare
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
Compare
1000 pcs.
Black (BK) TC3FT6S-PA66HIRHS-BK 151-00028
Bundling clip for hole (round), L=37.0mm, natural, 14000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
TC4FT6LG-PA66HIRHS-NA 151-00986
Compare
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
Compare
14000 pcs.
Natural (NA) TC4FT6LG-PA66HIRHS-NA 151-00986
Bundling clip for hole (round), L=27.3mm, black, 20000pcs.
Compare
BCOWFT6M-PA66HIRHS-BK 151-02226
Compare
Compare
Compare
20000 pcs.
Black (BK) BCOWFT6M-PA66HIRHS-BK 151-02226
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M
Compare
BCOWFT6M-PA66HIRHS-NA 151-02227
Compare
BCOWFT6M
Compare
Compare
20000 pcs.
Natural (NA) BCOWFT6M-PA66HIRHS-NA 151-02227
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H9P-PA66-NA 211-60099
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
1000 pcs.
Natural (NA) H9P-PA66-NA 211-60099
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU10C-CR/AL-BK 211-15100
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU12C-AL/CR-BK 211-15120
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU8C-AL/CR-BK 211-15080
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 180°, black, 280pcs.
RCA180SM10.
Compare
RCB180SM10SS-PA666V0/SS304-BK 151-03005
Compare
RCA180SM10.
Compare
Compare
280
Black (BK) RCB180SM10SS-PA666V0/SS304-BK 151-03005
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.4 mm, 180°, black, 280pcs.
Compare
RCB180SM8-PA666V0/ST/ZN-BK 151-03013
Compare
Compare
Compare
280
Black (BK) RCB180SM8-PA666V0/ST/ZN-BK 151-03013
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
Compare
RCB90SM10SS-PA666V0/SS304-BK 151-03006
Compare
Compare
Compare
280
Black (BK) RCB90SM10SS-PA666V0/SS304-BK 151-03006
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.4 mm, 180°, black, 300pcs.
Compare
RCA180SM8-PA666V0/ST/ZN-BK 151-03012
Compare
Compare
Compare
300
Black (BK) RCA180SM8-PA666V0/ST/ZN-BK 151-03012
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Compare
RCC180SM8-PA666V0/ST/ZN-BK 151-03014
Compare
Compare
Compare
160
Black (BK) RCC180SM8-PA666V0/ST/ZN-BK 151-03014
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCC180SM8SS-PA666V0/SS304-BK 151-02737
Compare
Compare
Compare
160 pcs.
Black (BK) RCC180SM8SS-PA666V0/SS304-BK 151-02737
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCD180MM8SS-PA666V0/SS304-BK 151-03111
Compare
Compare
Compare
140 pcs.
Black (BK) RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10.
Compare
RCD180SM10SS-PA666V0/SS304-BK 151-03008
Compare
RCD180SM10.
Compare
Compare
160
Black (BK) RCD180SM10SS-PA666V0/SS304-BK 151-03008
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Compare
RCD180SM8-PA666V0/ST/ZN-BK 151-03015
Compare
Compare
Compare
160
Black (BK) RCD180SM8-PA666V0/ST/ZN-BK 151-03015
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCD180SM8SS-PA666V0/SS304-BK 151-02734
Compare
Compare
Compare
160 pcs.
Black (BK) RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 90°, black, 140pcs.
Compare
RCD90LM10SS-PA666V0/SS304-BK 151-03010
Compare
Compare
Compare
140
Black (BK) RCD90LM10SS-PA666V0/SS304-BK 151-03010
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
Compare
RCD90LM8-PA666V0/ST/ZN-BK 151-02878
Compare
Compare
Compare
140
Black (BK) RCD90LM8-PA666V0/ST/ZN-BK 151-02878
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
Compare
RCD90LM8SS-PA666V0/SS304-BK 151-03144
Compare
Compare
Compare
140
Black (BK) RCD90LM8SS-PA666V0/SS304-BK 151-03144
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
Compare
RCD90SM8-PA666V0/ST/ZN-BK 151-02877
Compare
Compare
Compare
160
Black (BK) RCD90SM8-PA666V0/ST/ZN-BK 151-02877
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
Compare
RCD90SM8SS-PA666V0/SS304-BK 151-03011
Compare
Compare
Compare
160
Black (BK) RCD90SM8SS-PA666V0/SS304-BK 151-03011
Connector clip for hole (round), EWCAP-005-11, black, 500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
FT6LG.M.St.Aufn.II-PA66HIRHS-BK 155-32602
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
500 pcs.
Black (BK) FT6LG.M.St.Aufn.II-PA66HIRHS-BK 155-32602
Connector clip for hole (round), black, 1000pcs.
The connector clip can be removed without damage.
Compare
STECKERHALTER SITZ-PA66HIRHS-BK 155-36002
Compare
The connector clip can be removed without damage.
Compare
Compare
1000 pcs.
Black (BK) STECKERHALTER SITZ-PA66HIRHS-BK 155-36002
Connector clip for edge, black, 1000pcs.
Connector Clips feature various attachment point configurations to accommodate the many connectors on the market.
Compare
EC28-PA66HIRHS-BK 151-00151
Compare
Connector Clips feature various attachment point configurations to accommodate the many connectors on the market.
Compare
Compare
1000 pcs.
Black (BK) EC28-PA66HIRHS-BK 151-00151
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Compare
CCEC6-PA66HIRHS-BK 150-92600
Compare
Connector clip attaches to surfaces with edge clip.
Compare
Compare
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Bundling clip for edge, L=46.5mm, black, 500pcs.
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Compare
EC17-PA66HIRHS-BK 151-03403
Compare
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Compare
Compare
500 pcs.
Black (BK) EC17-PA66HIRHS-BK 151-03403
Bundling clip for hole (round), L=40.0mm, SO=31.0mm, black, 500pcs.
Arrowhead fastener requires low insertion and provides high extraction force, for simple, secure performance.
Compare
STAND OFF CLIP-PA66HIRHS-BK 150-45397
Compare
Arrowhead fastener requires low insertion and provides high extraction force, for simple, secure performance.
Compare
Compare
500 pcs.
Black (BK) STAND OFF CLIP-PA66HIRHS-BK 150-45397
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
Oval fir tree firmly secures clip to mounting surface.
Compare
WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Compare
Oval fir tree firmly secures clip to mounting surface.
Compare
Compare
1000 pcs.
Black (BK) WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Bundling clip for hole (oval), L=58.0mm, natural, 8000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
BCFTOVAL-PA66HIRHS-NA 151-01239
Compare
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Compare
8000 pcs.
Natural (NA) BCFTOVAL-PA66HIRHS-NA 151-01239
Bundling clip for hole (oval), L=38.7mm, natural, 10000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
BCFTOVAL2-PA66HIRHS-NA 151-01240
Compare
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Compare
10000 pcs.
Natural (NA) BCFTOVAL2-PA66HIRHS-NA 151-01240
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H7P-PA66-NA 211-60079
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
1000 pcs.
Natural (NA) H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
CCOVAL-PA66HIRHSUV-BK 151-00925
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
5000 pcs.
Black (BK) CCOVAL-PA66HIRHSUV-BK 151-00925
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
EC14-PA66HIRHS-BK 151-03404
Compare
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
Compare
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
EC15-PA66HIRHS-BK 151-03401
Compare
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
Compare
500 pcs.
Black (BK) EC15-PA66HIRHS-BK 151-03401
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
Bundling Clip for round holes 6.5 mm.
Compare
TC2FT6LG-PA66HIRHS-NA 151-00020
Compare
Bundling Clip for round holes 6.5 mm.
Compare
Compare
10000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00020
Bundling clip for hole (round), L=55.0mm, SO=13.0mm, black, 500pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
SOC5FT6LG-PA66HIRHS-BK 151-00074
Compare
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Compare
500 pcs.
Black (BK) SOC5FT6LG-PA66HIRHS-BK 151-00074
Connector clip for hole (round), black, 500pcs.
Connector Clip for Connectors with AMP connection, with fir tree for round holes.
Compare
FT6LG-AMP-PA66HIRHS-BK 155-03800
Compare
Connector Clip for Connectors with AMP connection, with fir tree for round holes.
Compare
Compare
500 pcs.
Black (BK) FT6LG-AMP-PA66HIRHS-BK 155-03800
Connector clip for hole (round), black, 500pcs.
Compare
FT6LG.YAZ.CONNECT-TS-PA66HIRHS-BK 155-30702
Compare
Compare
Compare
500 pcs.
Black (BK) FT6LG.YAZ.CONNECT-TS-PA66HIRHS-BK 155-30702
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
Compare
CCOVAL2-PA66HIRHSUV-BK 151-01108
Compare
Compare
Compare
5000 pcs.
Black (BK) CCOVAL2-PA66HIRHSUV-BK 151-01108
Bundling clip for edge, L=40.0mm, black, 500pcs.
Bundling Clip (EC16) for edges 1.0 - 3.0 mm.
Compare
EC16-PA66HIRHS-BK 151-03402
Compare
Bundling Clip (EC16) for edges 1.0 - 3.0 mm.
Compare
Compare
500 pcs.
Black (BK) EC16-PA66HIRHS-BK 151-03402
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
TC5FT6S-PA66HIRHS-BK 150-95500
Compare
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
Compare
1000 pcs.
Black (BK) TC5FT6S-PA66HIRHS-BK 150-95500
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
TC4FT6LG-PA66HIRHS-BK 151-00215
Compare
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
Compare
10000 pcs.
Black (BK) TC4FT6LG-PA66HIRHS-BK 151-00215
Bundling clip for hole (round), L=37.0mm, natural, 10000pcs.
Compare
TC4FT6LG-PA66HIRHS-NA 151-00467
Compare
Compare
Compare
10000 pcs.
Natural (NA) TC4FT6LG-PA66HIRHS-NA 151-00467
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H1P-PA66-NA 211-60019
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H5P-PA66-NA 211-60059
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀11.0-12.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP4-PA66GF13-BK 190-00288
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
100 pcs.
Black (BK) SNP4-PA66GF13-BK 190-00288
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀15.6-18.3mm, black, 1000pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP12A-PA66GF13-BK 190-00255
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
1000
Black (BK) SNP12A-PA66GF13-BK 190-00255
Plastic hose clamp, ⌀5.8-6.5mm, natural
SNP - Snapper Hose Clips range.
Compare
SNP1(E)-POM-NA 190-00024
Compare
SNP - Snapper Hose Clips range.
Compare
Compare
Natural (NA) SNP1(E)-POM-NA 190-00024
SNP-Series
SNP - Snapper Hose Clips range.
Compare
SNP10(E)-POM 191-10100
Compare
SNP - Snapper Hose Clips range.
Compare
Compare
500 pcs.
SNP10(E)-POM 191-10100
Plastic hose clamp, ⌀14.8-16.7mm, white, 100pcs.
Completely reusable - will not rust or corrode.
Compare
SNP10-POM-WH 190-00045
Compare
Completely reusable - will not rust or corrode.
Compare
Compare
100
White (WH) SNP10-POM-WH 190-00045
Plastic hose clamp, ⌀14.5-16.6mm, white, 1000pcs.
Completely reusable - will not rust or corrode.
Compare
SNP10-POM-WH 190-00046
Compare
Completely reusable - will not rust or corrode.
Compare
Compare
1000
White (WH) SNP10-POM-WH 190-00046
Plastic hose clamp, natural
Completely reusable - will not rust or corrode.
Compare
SNP10-POM-NA 190-00047
Compare
Completely reusable - will not rust or corrode.
Compare
Compare
Natural (NA) SNP10-POM-NA 190-00047
Plastic hose clamp, ⌀15.0-16.5mm, white, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Completely reusable - will not rust or corrode.
Compare
SNP10-POM-WH 190-00260
Compare
Completely reusable - will not rust or corrode.
Compare
Compare
100 pcs.
White (WH) SNP10-POM-WH 190-00260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀14.8-16.7mm, natural, 200pcs.
Completely reusable - will not rust or corrode.
Compare
SNP10-POM-NA 190-00320
Compare
Completely reusable - will not rust or corrode.
Compare
Compare
200 pcs.
Natural (NA) SNP10-POM-NA 190-00320
Plastic hose clamp, ⌀15.0-16.8mm, natural, 500pcs.
Completely reusable - will not rust or corrode.
Compare
SNP10(E)-POM-NA 191-10109
Compare
Completely reusable - will not rust or corrode.
Compare
Compare
500 pcs.
Natural (NA) SNP10(E)-POM-NA 191-10109
Plastic hose clamp, ⌀15.0-17.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
SNP - Snapper Hose Clips range.
Compare
SNP10-PA66W-BK 190-00262
Compare
SNP - Snapper Hose Clips range.
Compare
Compare
100 pcs.
Black (BK) SNP10-PA66W-BK 190-00262
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀14.8-16.7mm, black, 200pcs.
SNP - Snapper Hose Clips range.
Compare
SNP10-PA66-BK 190-00321
Compare
SNP - Snapper Hose Clips range.
Compare
Compare
200 pcs.
Black (BK) SNP10-PA66-BK 190-00321
Plastic hose clamp, ⌀14.8-16.7mm, natural, 200pcs.
SNP - Snapper Hose Clips range.
Compare
SNP10-PA66-NA 190-00344
Compare
SNP - Snapper Hose Clips range.
Compare
Compare
200 pcs.
Natural (NA) SNP10-PA66-NA 190-00344
Plastic hose clamp, ⌀14.5-16.6mm, black, 1000pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP10-PA66GF13-BK 190-00043
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
1000
Black (BK) SNP10-PA66GF13-BK 190-00043
Plastic hose clamp, ⌀15.0-17.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
SNP - Snapper Hose Clips range.
Compare
SNP10-PA66GF13-BK 190-00261
Compare
SNP - Snapper Hose Clips range.
Compare
Compare
100 pcs.
Black (BK) SNP10-PA66GF13-BK 190-00261
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP10-PA66HIRHSGF15-BK 192-10100
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
100 pcs.
Black (BK) SNP10-PA66HIRHSGF15-BK 192-10100
Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP12(E)-POM-NA 191-10129
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
500 pcs.
Natural (NA) SNP12(E)-POM-NA 191-10129
Plastic hose clamp, ⌀16.8-18.4mm, white, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP12A-POM-WH 190-00252
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
100
White (WH) SNP12A-POM-WH 190-00252
Plastic hose clamp, ⌀16.8-18.4mm, white, 1000pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP12A-POM-WH 190-00253
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
1000
White (WH) SNP12A-POM-WH 190-00253
Plastic hose clamp, ⌀16.0-18.0mm, white, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP12-POM-WH 190-00263
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
100 pcs.
White (WH) SNP12-POM-WH 190-00263
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀16.8-18.4mm, natural, 200pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP12(E)-POM-NA 190-00312
Compare
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
200 pcs.
Natural (NA) SNP12(E)-POM-NA 190-00312

Results for "hard line high frequency" in Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

  South Korea

소셜 미디어

© HellermannTyton 2026 (v4.312.2)  |  업데이트: 26/07/2026  |  개인 정보 설정
문의