Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
22/08/2025

Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

5,808 products
Reset all
Cable clip for stud, Dmin=19.0mm, Dmax=28.0mm, ⌀5.0 mm
AHC3SB for studs with automatic locking function.
Compare
Cable clip for stud, Dmin=19.0mm, Dmax=28.0mm, ⌀5.0 mm
AHC3SB-PA66HIRHS-BK 151-00372
Compare
Add to watchlist
1000 pcs.
Black (BK) AHC3SB-PA66HIRHS-BK 151-00372
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EdgeClip with Twist Lock.
Compare
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EC1-3TL7OTP-PA66HIRHS-BK 151-02993
Compare
Add to watchlist
25 pcs.
Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02993
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
EdgeClip for direct fixation up to two solar cables vertical to an Edge.
Compare
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
EC1-3SVDHC6-7-PA66HSUV/MET-BK 151-04209
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) EC1-3SVDHC6-7-PA66HSUV/MET-BK 151-04209
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
EdgeClip for direct fixation up to two solar cables vertical to an Edge.
Compare
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
EC1-3SVDHC6-7-PA66HSUV/MET-BK 151-04455
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) EC1-3SVDHC6-7-PA66HSUV/MET-BK 151-04455
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.
Compare
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
EC1-3SVDHC6-7-PA11/MET-BK 151-04529
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) EC1-3SVDHC6-7-PA11/MET-BK 151-04529
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, 25mx6.4mm, ⌀19.05mm, black, 25m
Compare
Stainless steel cable tie, 25mx6.4mm, ⌀19.05mm, black, 25m
MELS064T4-25-6S3-SS316/PPA-BK 111-02513
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 m
Black (BK) MELS064T4-25-6S3-SS316/PPA-BK 111-02513
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, 25mx9.5mm, ⌀19.05mm, black, 25m
Compare
Stainless steel cable tie, 25mx9.5mm, ⌀19.05mm, black, 25m
MELS095T4-25-6S3-SS316/PPA-BK 111-02514
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 m
Black (BK) MELS095T4-25-6S3-SS316/PPA-BK 111-02514
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, 25mx12.7mm, ⌀25.4mm, black, 25m
Compare
Stainless steel cable tie, 25mx12.7mm, ⌀25.4mm, black, 25m
MELS127T4-25-6S3-SS316/PPA-BK 111-02515
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 m
Black (BK) MELS127T4-25-6S3-SS316/PPA-BK 111-02515
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, 25mx15.9mm, ⌀25.4mm, black, 25m
Compare
Stainless steel cable tie, 25mx15.9mm, ⌀25.4mm, black, 25m
MELS159T4-25-6S3-SS316/PPA-BK 111-02516
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 m
Black (BK) MELS159T4-25-6S3-SS316/PPA-BK 111-02516
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud/with pipe/tube holder, outside serrated, ⌀40.0mm, black, 250pcs.
One Piece Fixing Tie for Studs 5-6mm with Harness Clip 11-15mm
Compare
Fixing tie for stud/with pipe/tube holder, outside serrated, ⌀40.0mm, black, 250pcs.
T50ROSASHC13SB5-6E-PA66HIRHS-BK 157-00539
Compare
Add to watchlist
250 pcs.
Black (BK) T50ROSASHC13SB5-6E-PA66HIRHS-BK 157-00539
Fixing tie with pipe/tube holder, ⌀9.5-11.5mm, black, 2000
Independent rotation allows for adjustable routing orientation.
Compare
Fixing tie with pipe/tube holder, ⌀9.5-11.5mm, black, 2000
T50SVCMOC10M180-PA66HIRHSUV-BK 156-02254
Compare
Add to watchlist
2000
Black (BK) T50SVCMOC10M180-PA66HIRHSUV-BK 156-02254
Fixing tie with pipe/tube holder, ⌀9.5-11.5mm, black/natural, 2000pcs.
Compare
Fixing tie with pipe/tube holder, ⌀9.5-11.5mm, black/natural, 2000pcs.
T50RMOC10SAD-PA66HIRHSUV/PA66HIRHS-BK/NA 156-03613
Compare
Add to watchlist
2000 pcs.
Black (BK), Natural (NA) T50RMOC10SAD-PA66HIRHSUV/PA66HIRHS-BK/NA 156-03613
Fixing tie with pipe/tube holder, ⌀2.0-30.0mm, black, 250pcs.
2-piece fixing tie, 360° rotatable, a cable tie in combination with an AHC to route and fix harnesses.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-30.0mm, black, 250pcs.
T50SOSFT7EIAHC2T-PA66HS/PA66HIRHS-BK 156-03056
Compare
Add to watchlist
250 pcs.
Black (BK) T50SOSFT7EIAHC2T-PA66HS/PA66HIRHS-BK 156-03056
Fixing tie with pipe/tube holder, ⌀100.0mm, black, 200pcs.
2-piece fixing tie, 360° rotatable, a cable tie in combination with an AHC to route and fix harnesses.
Compare
Fixing tie with pipe/tube holder, ⌀100.0mm, black, 200pcs.
X120RIAHC2T-PA66HIRHS-BK 156-03093
Compare
Add to watchlist
200 pcs.
Black (BK) X120RIAHC2T-PA66HIRHS-BK 156-03093
Cable tie mount for hole (round), Wmax=3.5mm, ⌀5.5 mm, M5 Screw, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Compare
Cable tie mount for hole (round), Wmax=3.5mm, ⌀5.5 mm, M5 Screw, natural, 500pcs.
FH30-PA66-NA 151-61311
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Natural (NA) FH30-PA66-NA 151-61311
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for hole (round), Wmax=4.6mm, ⌀7.1 mm, black, 100pcs.
FH Cable Tie Mounts for areas with limited space.
Compare
Cable tie mount for hole (round), Wmax=4.6mm, ⌀7.1 mm, black, 100pcs.
FH50-PA66-BK 151-00125
Compare
Add to watchlist
100 pcs.
Black (BK) FH50-PA66-BK 151-00125
Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, natural, 50pcs.
FH Cable Tie Mounts for areas with limited space.
Compare
Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, natural, 50pcs.
FH50-PA66-NA 151-00860
Compare
Add to watchlist
50 pcs.
Natural (NA) FH50-PA66-NA 151-00860
Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, black, 50pcs.
FH Cable Tie Mounts for areas with limited space.
Compare
Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, black, 50pcs.
FH50-PA66-BK 151-00863
Compare
Add to watchlist
50 pcs.
Black (BK) FH50-PA66-BK 151-00863
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 500pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 500pcs.
LKM-PA66-BK 151-26302
Compare
Add to watchlist
500 pcs.
Black (BK) LKM-PA66-BK 151-26302
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 500pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 500pcs.
LKM-PA66-NA 151-26303
Compare
Add to watchlist
500 pcs.
Natural (NA) LKM-PA66-NA 151-26303
Cable tie mount for screw fixation, Wmax=8.6mm, ⌀M6, M6 Screw, black, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=8.6mm, ⌀M6, M6 Screw, black, 100pcs.
CL8-SB6-PA66W-BK 151-00140
Compare
Add to watchlist
100 pcs.
Black (BK) CL8-SB6-PA66W-BK 151-00140
Cable tie mount for screw fixation, Wmax=9.0mm, ⌀5.1 mm, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=9.0mm, ⌀5.1 mm, black, 100pcs.
LOK02-PA66W-BK 151-80210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) LOK02-PA66W-BK 151-80210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5-PA66-NA 151-00888
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR6G5-PA66-NA 151-00888
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR6G5-PA66W-BK 151-00608
Compare
Add to watchlist
100 pcs.
Black (BK) KR6G5-PA66W-BK 151-00608
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5-PA66-NA 151-00552
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR8G5-PA66-NA 151-00552
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30304
Compare
Add to watchlist
100 pcs.
White (WH) CTM0-PA66-WH 151-30304
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30601
Compare
Add to watchlist
100 pcs.
Black (BK) CTM3-PA66-BK 151-30601
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 1000pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 1000pcs.
CTM3-PA66-BK 151-30603
Compare
Add to watchlist
1000 pcs.
Black (BK) CTM3-PA66-BK 151-30603
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 1000pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 1000pcs.
CTM3-PA66-WH 151-30607
Compare
Add to watchlist
1000 pcs.
White (WH) CTM3-PA66-WH 151-30607
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Cable Tie Mounts KR6G5, KR8G5 and CTM.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR5G5-PA66-NA 151-00546
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR5G5-PA66-NA 151-00546
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
Cable Tie Mounts KR6G5, KR8G5 and CTM.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
KR5G5-E/TFE-BU 151-00652
Compare
Add to watchlist
100 pcs.
Blue (BU) KR5G5-E/TFE-BU 151-00652
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR7G5-PA66-NA 151-00548
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR7G5-PA66-NA 151-00548
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
KR7G5-E/TFE-BU 151-00549
Compare
Add to watchlist
100 pcs.
Blue (BU) KR7G5-E/TFE-BU 151-00549
Cable tie mount for screw fixation, Wmax=10.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=10.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR9G5-PA66-NA 151-00556
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR9G5-PA66-NA 151-00556
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀M6, silver, 1000
Heavy Duty Mounts HDM-Series, patent number US5820083.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀M6, silver, 1000
HDM6-TS-A-PPS-SR 151-03046
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000
Silver (SR) HDM6-TS-A-PPS-SR 151-03046
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀M6, M6 Screw, grey, 2500pcs.
Heavy Duty Mounts HDM-Series, patent number US5820083.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀M6, M6 Screw, grey, 2500pcs.
HDM6-TS-PA46-GY 151-02891
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
2500 pcs.
Grey (GY) HDM6-TS-PA46-GY 151-02891
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.7mm, ⌀3.1 mm, M3 Screw, natural, 100pcs.
Simple to install with a screw or rivet.
Compare
Cable tie mount for screw fixation, Wmax=2.7mm, ⌀3.1 mm, M3 Screw, natural, 100pcs.
MB1-PA66-NA 151-00558
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) MB1-PA66-NA 151-00558
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, M4 Screw, natural, 100pcs.
Screw fix cable tie mounts MB1.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, M4 Screw, natural, 100pcs.
MB2-PA66-NA 151-00559
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) MB2-PA66-NA 151-00559
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, inside serrated, ⌀17-24mm, black, 3000pcs.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀17-24mm, black, 3000pcs.
T50ROC17-24SET-PA66HIRHS/PA66HS-BK 156-02510
Compare
Add to watchlist
3000 pcs.
Black (BK) T50ROC17-24SET-PA66HIRHS/PA66HS-BK 156-02510
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black
These HDM (Heavy duty mount) are suitable for assembling on screws.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black
T120ROSHDMP6SET-PA66HIRHS/PA66HS-BK 156-00885
Compare
Add to watchlist
Black (BK) T120ROSHDMP6SET-PA66HIRHS/PA66HS-BK 156-00885
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black, 1000pcs.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black, 1000pcs.
T120RCPCM6-TSSET-PA66HIRHS-BK 156-02468
Compare
Add to watchlist
1000 pcs.
Black (BK) T120RCPCM6-TSSET-PA66HIRHS-BK 156-02468
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, orange/black, 1000pcs.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, orange/black, 1000pcs.
T120RCPCM6-TSSET-PA66HIRHS-OG/BK 156-04047
Compare
Add to watchlist
1000 pcs.
Orange (OG), High Voltage (HV), Black (BK) T120RCPCM6-TSSET-PA66HIRHS-OG/BK 156-04047
Cable tie outside serrated for direct fixation, black, 25pcs.
TAS-Series.
Compare
Cable tie outside serrated for direct fixation, black, 25pcs.
TAS120M-PA66HIRHSUV-BK 133-02356
Compare
Add to watchlist
25 pcs.
Black (BK) TAS120M-PA66HIRHSUV-BK 133-02356
Cable tie inside serrated for narrow space, 200x5.0mm, ⌀3.0-50mm, natural, 100pcs.
Compare
Cable tie inside serrated for narrow space, 200x5.0mm, ⌀3.0-50mm, natural, 100pcs.
LPT200-PA66-NA 112-00038
Compare
Add to watchlist
100 pcs.
Natural (NA) LPT200-PA66-NA 112-00038
Cable tie inside serrated for narrow space, 200x5.0mm, ⌀3.0-50mm, natural, 100pcs.
Compare
Cable tie inside serrated for narrow space, 200x5.0mm, ⌀3.0-50mm, natural, 100pcs.
LPT200-PA46-NA 112-00040
Compare
Add to watchlist
100 pcs.
Natural (NA) LPT200-PA46-NA 112-00040
Cable tie inside serrated for narrow space, 200x5.0mm, ⌀3.0-50mm, white, 100pcs.
Compare
Cable tie inside serrated for narrow space, 200x5.0mm, ⌀3.0-50mm, white, 100pcs.
LPT200-PA66V0-WH 112-00042
Compare
Add to watchlist
100 pcs.
White (WH) LPT200-PA66V0-WH 112-00042
Hook & Loop
Hook and loop grip ties can be opened and closed numerous times for repositioning or reuse.
Compare
Hook & Loop
GT.50X8 854-44365
Compare
Add to watchlist
100 pcs.
Blue (BU) GT.50X8 854-44365
Hook & Loop
Hook and loop grip ties can be opened and closed numerous times for repositioning or reuse.
Compare
Hook & Loop
GT.50X8 854-44366
Compare
Add to watchlist
10 pcs.
Blue (BU) GT.50X8 854-44366
Hook & Loop
Hook and loop grip ties can be opened and closed numerous times for repositioning or reuse.
Compare
Hook & Loop
GT.75X15 854-44374
Compare
Add to watchlist
10 pcs.
Red (RD) GT.75X15 854-44374
Hook & Loop
Hook and loop grip ties can be opened and closed numerous times for repositioning or reuse.
Compare
Hook & Loop
GT.75X15 854-44382
Compare
Add to watchlist
10 pcs.
Blue (BU) GT.75X15 854-44382
Fixing tie for stud, ⌀1.0-35.0mm, natural, 500pcs.
Compare
Fixing tie for stud, ⌀1.0-35.0mm, natural, 500pcs.
T50SSBS6OT-E-PA66HS-NA 157-00395
Compare
Add to watchlist
500 pcs.
Natural (NA) T50SSBS6OT-E-PA66HS-NA 157-00395
Fixing tie for screw fixation, inside serrated, ⌀5.0-102mm, black, 100pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-102mm, black, 100pcs.
T120MR(E)-PA66W-BK 113-12017
Compare
Add to watchlist
100 pcs.
Black (BK) T120MR(E)-PA66W-BK 113-12017
Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm
High-performing round fir trees mean no additional fastener is needed for mounting.
Compare
Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm
IRCAFT6.5LG-PA66HIRHSUV-BK 156-02706
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Compare
Add to watchlist
25 pcs.
Black (BK) IRCAFT6.5LG-PA66HIRHSUV-BK 156-02706
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Connector clip, EWCAP-005-17, black, 3000Carton
Oval fir tree ensures a tight connection without rotation.
Compare
Connector clip, EWCAP-005-17, black, 3000Carton
CC17FTOVAL-PA66HIRHSUV-BK 151-02806
Compare
Add to watchlist
3000 pcs.
Black (BK) CC17FTOVAL-PA66HIRHSUV-BK 151-02806
Backshell, 90°, nom⌀17.0mm, black, 800pcs.
Backshell (V0)
Compare
Backshell, 90°, nom⌀17.0mm, black, 800pcs.
BSE90NW17-PA66/PA6FR-BK 151-02772
Compare
Add to watchlist
800 pcs.
Black (BK) BSE90NW17-PA66/PA6FR-BK 151-02772
Connector clip for edge, black, 1000pcs.
Compare
Connector clip for edge, black, 1000pcs.
EC6mod-PA66HIRHS-BK 151-00464
Compare
Add to watchlist
1000 pcs.
Black (BK) EC6mod-PA66HIRHS-BK 151-00464
Connector clip for edge, EWCAP-005-11, black, 5000pcs.
Compare
Connector clip for edge, EWCAP-005-11, black, 5000pcs.
EC46-PA66HIRHSUV-BK 151-01113
Compare
Add to watchlist
5000 pcs.
Black (BK) EC46-PA66HIRHSUV-BK 151-01113
Bundling clip for edge, L=39.0mm, black, 500pcs.
Bundling Clip for edges 1.5 - 4 mm. Designed for our Autotools.
Compare
Bundling clip for edge, L=39.0mm, black, 500pcs.
ATSBCEC38-PA66HSW-BK 102-68385
Compare
Add to watchlist
500 pcs.
Black (BK) ATSBCEC38-PA66HSW-BK 102-68385
Plastic hose clamp, ⌀15.0-16.8mm, natural, 500pcs.
Completely reusable - will not rust or corrode.
Compare
Plastic hose clamp, ⌀15.0-16.8mm, natural, 500pcs.
SNP10(E)-POM-NA 191-10109
Compare
Add to watchlist
500 pcs.
Natural (NA) SNP10(E)-POM-NA 191-10109
Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.
SNP16-POM-NA 191-10169
Compare
Add to watchlist
500 pcs.
Natural (NA) SNP16-POM-NA 191-10169
Plastic hose clamp, ⌀28.8-33.2mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
Plastic hose clamp, ⌀28.8-33.2mm, black, 100pcs.
SNP28-PA66GF13-BK 190-00127
Compare
Add to watchlist
100 pcs.
Black (BK) SNP28-PA66GF13-BK 190-00127
Plastic hose clamp, ⌀32.5-35.1mm, natural, 100pcs.
Compare
Plastic hose clamp, ⌀32.5-35.1mm, natural, 100pcs.
SNP34(E)-POM-NA 191-10349
Compare
Add to watchlist
100 pcs.
Natural (NA) SNP34(E)-POM-NA 191-10349
Plastic hose clamp, ⌀41.0-48.1mm, black, 50pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
Plastic hose clamp, ⌀41.0-48.1mm, black, 50pcs.
SNP38-PA66GF13-BK 192-10380
Compare
Add to watchlist
50 pcs.
Black (BK) SNP38-PA66GF13-BK 192-10380
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Automatic Harness Clip Family for oval holes.
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3BHR-PA66HIRHS-BK 151-00370
Compare
Add to watchlist
400 pcs.
Black (BK) AHC3BHR-PA66HIRHS-BK 151-00370
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3CHR-PA6HIR-BK 151-00371
Compare
Add to watchlist
400 pcs.
Black (BK) AHC3CHR-PA6HIR-BK 151-00371
Cable clip for stud, Dmin=19.0mm, Dmax=28.0mm
IAHC elements can be connected.
Compare
Cable clip for stud, Dmin=19.0mm, Dmax=28.0mm
IAHC3T-PA66HIRHS-BK 151-02884
Compare
Add to watchlist
400 pcs.
Black (BK) IAHC3T-PA66HIRHS-BK 151-02884
Cable clip for stud, Dmin=8.5mm, Dmax=12.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Compare
Cable clip for stud, Dmin=8.5mm, Dmax=12.5mm, ⌀5.0 mm
IPC10P-PA66HIR-BK 151-14401
Compare
Add to watchlist
500 pcs.
Black (BK) IPC10P-PA66HIR-BK 151-14401
Cable clip for stud, Dmin=8.5mm, Dmax=12.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Compare
Cable clip for stud, Dmin=8.5mm, Dmax=12.5mm, ⌀5.0 mm
IPC10P-PA66HIR-BK 151-00097
Compare
Add to watchlist
100 pcs.
Black (BK) IPC10P-PA66HIR-BK 151-00097
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
Clips interlock to expand installation options.
Compare
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
IPC23P-PA66-BK 151-14604
Compare
Add to watchlist
500 pcs.
Black (BK) IPC23P-PA66-BK 151-14604
Cable clip for stud, Dmin=5.0mm, Dmax=6.0mm
IPC-P
Compare
Cable clip for stud, Dmin=5.0mm, Dmax=6.0mm
IPC5P-PA66-BK 151-00870
Compare
Add to watchlist
100 pcs.
Black (BK) IPC5P-PA66-BK 151-00870
Cable clip for stud, Dmin=9.5mm, Dmax=11.5mm, nom⌀=9.0 mm, ⌀5.0 mm/6.0 mm
Compare
Cable clip for stud, Dmin=9.5mm, Dmax=11.5mm, nom⌀=9.0 mm, ⌀5.0 mm/6.0 mm
SMF2MOC10M-PA66HIRHSUV-BK 156-02911
Compare
Add to watchlist
2000 pcs.
Black (BK) SMF2MOC10M-PA66HIRHSUV-BK 156-02911
Stainless steel cable tie, folding, 330x10.26mm, ⌀25.0-90mm, black, 50pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Compare
Stainless steel cable tie, folding, 330x10.26mm, ⌀25.0-90mm, black, 50pcs.
MLT12SSC10-SS316/SP-BK 111-91120
Compare
Add to watchlist
50 pcs.
Black (BK) MLT12SSC10-SS316/SP-BK 111-91120
Stainless steel cable tie, folding, 430x10.26mm, ⌀25.0-120mm, black, 50pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Compare
Stainless steel cable tie, folding, 430x10.26mm, ⌀25.0-120mm, black, 50pcs.
MLT16SSC10-SS316/SP-BK 111-91160
Compare
Add to watchlist
50 pcs.
Black (BK) MLT16SSC10-SS316/SP-BK 111-91160
Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Compare
Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.
T30REC2.5A-PA66/PA66HS-BK 156-00493
Compare
Add to watchlist
500 pcs.
Black (BK) T30REC2.5A-PA66/PA66HS-BK 156-00493
Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Compare
Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.
T30REC2.5B-PA66/PA66HS-BK 156-00494
Compare
Add to watchlist
500 pcs.
Black (BK) T30REC2.5B-PA66/PA66HS-BK 156-00494
Fixing tie for cable bundles/with pipe/tube holder, ⌀4.0-30.0mm, grey, 500pcs.
Pipe Clip T30ROC2A for post-installation of additional cables for preassembled cable looms.
Compare
Fixing tie for cable bundles/with pipe/tube holder, ⌀4.0-30.0mm, grey, 500pcs.
T30ROC2A-PA46-GY 156-01608
Compare
Add to watchlist
500 pcs.
Grey (GY) T30ROC2A-PA46-GY 156-01608
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Compare
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1A-PA66HS/PA66HIRHS-BK 156-01141
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-01141
Fixing tie with pipe/tube holder/for hole (round), ⌀1.5-50.0mm, black, 2000pcs.
T50RCTC8FT6.
Compare
Fixing tie with pipe/tube holder/for hole (round), ⌀1.5-50.0mm, black, 2000pcs.
T50RCTCFT6-PA66HS/PA66HIRHS-BK 156-01245
Compare
Add to watchlist
2000 pcs.
Black (BK) T50RCTCFT6-PA66HS/PA66HIRHS-BK 156-01245
Cable tie mount for adhesive use, Wmax=3.5mm, ⌀2.5 mm, natural, 100pcs.
TY-Series selfadhesive mounts with rectangle design.
Compare
Cable tie mount for adhesive use, Wmax=3.5mm, ⌀2.5 mm, natural, 100pcs.
LKCRSA-PA66-NA 151-00027
Compare
Add to watchlist
100 pcs.
Natural (NA) LKCRSA-PA66-NA 151-00027
Cable tie mount for adhesive use, Wmax=3.5mm, ⌀2.5 mm, black, 100pcs.
TY-Series selfadhesive mounts with rectangle design.
Compare
Cable tie mount for adhesive use, Wmax=3.5mm, ⌀2.5 mm, black, 100pcs.
LKCRSA-PA66-BK 151-00104
Compare
Add to watchlist
100 pcs.
Black (BK) LKCRSA-PA66-BK 151-00104
Cable tie mount, ⌀4.2 mm, black, 100pcs.
Compare
Cable tie mount, ⌀4.2 mm, black, 100pcs.
TMB4A-PA66-BK 151-04551
Compare
Add to watchlist
100 pcs.
Black (BK) TMB4A-PA66-BK 151-04551
Cable tie mount, ⌀4.2 mm, natural, 100pcs.
Compare
Cable tie mount, ⌀4.2 mm, natural, 100pcs.
TMB4A-PA66-NA 151-04552
Compare
Add to watchlist
100 pcs.
Natural (NA) TMB4A-PA66-NA 151-04552
Cable tie mount for hole (round), Wmax=4.6mm, ⌀7.1 mm, M6 Screw, natural, 100pcs.
FH Cable Tie Mounts for areas with limited space.
Compare
Cable tie mount for hole (round), Wmax=4.6mm, ⌀7.1 mm, M6 Screw, natural, 100pcs.
FH50-PA66-NA 151-61501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) FH50-PA66-NA 151-61501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.6mm, ⌀M10, M10 Screw, black, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=8.6mm, ⌀M10, M10 Screw, black, 100pcs.
CL8-SB10-PA66W-BK 151-00139
Compare
Add to watchlist
100 pcs.
Black (BK) CL8-SB10-PA66W-BK 151-00139
Cable tie mount for screw fixation, Wmax=8.6mm, ⌀M8, M8 Screw, black, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=8.6mm, ⌀M8, M8 Screw, black, 100pcs.
CL8-SB8-PA66W-BK 151-00141
Compare
Add to watchlist
100 pcs.
Black (BK) CL8-SB8-PA66W-BK 151-00141
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 1000pcs.
KR6G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 1000pcs.
KR6G5-PA66-NA 151-00887
Compare
Add to watchlist
1000 pcs.
Natural (NA) KR6G5-PA66-NA 151-00887
Cable tie mount for screw fixation, Wmax=7.8mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.8mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
CTM4-PA666V0-BK 151-03102
Compare
Add to watchlist
100 pcs.
Black (BK) CTM4-PA666V0-BK 151-03102
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀8.3 mm, M8 Screw, black, 150pcs.
DCTMSBM8
Compare
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀8.3 mm, M8 Screw, black, 150pcs.
DCTMSBM8-PA66HIRHS-BK 151-03954
Compare
Add to watchlist
150 pcs.
Black (BK) DCTMSBM8-PA66HIRHS-BK 151-03954
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀8.3 mm, black, 150pcs.
DCTMM8.
Compare
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀8.3 mm, black, 150pcs.
DCTMM8-PA6GF30-BK 151-03955
Compare
Add to watchlist
150 pcs.
Black (BK) DCTMM8-PA6GF30-BK 151-03955
Cable tie mount for screw fixation, ⌀6.0 mm, black, 2000pcs.
Plastic Nuts KM5 and KM6.
Compare
Cable tie mount for screw fixation, ⌀6.0 mm, black, 2000pcs.
KM6-PA66HIR-BK 151-02281
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
2000 pcs.
Black (BK) KM6-PA66HIR-BK 151-02281
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount, black, 10000pcs.
Compare
Cable tie mount, black, 10000pcs.
ATSEC35-PA66HIRHS-BK 102-68350
Compare
Add to watchlist
10000 pcs.
Black (BK) ATSEC35-PA66HIRHS-BK 102-68350
Cable tie mount, black, 10000pcs.
Compare
Cable tie mount, black, 10000pcs.
ATSEC36-PA66HIRHS-BK 102-68360
Compare
Add to watchlist
10000 pcs.
Black (BK) ATSEC36-PA66HIRHS-BK 102-68360
Cable tie mount, black, 7000pcs.
Fixing element for edges 1.5-4 mm for atuomatic cable tie systems
Compare
Cable tie mount, black, 7000pcs.
ATSEC37-PA66HIRHS-BK 102-68370
Compare
Add to watchlist
7000 pcs.
Black (BK) ATSEC37-PA66HIRHS-BK 102-68370
Aluminium frame mount, T=1.5 – 2.0mm, natural, 100pcs.
Easy to install, remove and reposition with just a quarter-turn – no tools necessary.
Compare
Aluminium frame mount, T=1.5 – 2.0mm, natural, 100pcs.
AFLM20-PA66-NA 151-01065
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AFLM20-PA66-NA 151-01065
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount, T=1.5 – 1.9mm, natural, 100pcs.
Easy to install, remove and reposition with just a quarter-turn – no tools necessary.
Compare
Aluminium frame mount, T=1.5 – 1.9mm, natural, 100pcs.
AFLM20-1-PA66-NA 151-01610
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AFLM20-1-PA66-NA 151-01610
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount, T=5.5 – 6.0mm, natural, 100pcs.
Easy to install, remove and reposition with just a quarter-turn – no tools necessary.
Compare
Aluminium frame mount, T=5.5 – 6.0mm, natural, 100pcs.
AFLM40-PA66-NA 151-01066
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AFLM40-PA66-NA 151-01066
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount, W=6.0mm, T=2.5 - 3.0mm, blue, 100pcs.
Compare
Aluminium frame mount, W=6.0mm, T=2.5 - 3.0mm, blue, 100pcs.
MCAFLM30-1-PA66MD-BU 151-02567
Compare
Add to watchlist
100
Blue (BU) MCAFLM30-1-PA66MD-BU 151-02567
Fixing tie for edge, inside serrated, ⌀1.0-20.0mm, black, 10000Set
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
Fixing tie for edge, inside serrated, ⌀1.0-20.0mm, black, 10000Set
T18REC21SET-PA66HS/PA66HIRHS-BK 156-01264
Compare
Add to watchlist
10000 Set
Black (BK) T18REC21SET-PA66HS/PA66HIRHS-BK 156-01264
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black
These HDM (Heavy duty mount) are suitable for assembling on screws.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black
T120ROSHDMP6SET-PA66HS/PA66W-BK 156-00980
Compare
Add to watchlist
Black (BK) T120ROSHDMP6SET-PA66HS/PA66W-BK 156-00980
Fixing tie for connector/for cable bundles, inside serrated, ⌀2.0-45.0mm, black, 5000pcs.
Compare
Fixing tie for connector/for cable bundles, inside serrated, ⌀2.0-45.0mm, black, 5000pcs.
T50RCC11M-SET-PA66HIRHS-BK 156-03249
Compare
Add to watchlist
5000 pcs.
Black (BK) T50RCC11M-SET-PA66HIRHS-BK 156-03249

Results for "D-Clip Series" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  YouTube  Link Corporate Blog  Instagram  X  LinkedIn 
Contact General Terms of Sale and Supply Imprint Guidelines and commitments Privacy Policy Newsletter
Update: 16/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Update: 16/08/2025 | Privacy Settings
Contact