27/07/2026

Results for "12" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

1,195 products
Reset all
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Friction tab inside the fir tree allows the tie to sit in mount without falling out prior to installation.
Compare
T50RFT7-PA66HS-BK 111-85871
Compare
Add to watchlist
Friction tab inside the fir tree allows the tie to sit in mount without falling out prior to installation.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50RFT7-PA66HS-BK 111-85871
Fixing tie for hole (round), inside serrated, ⌀3.0-30.0mm, black, 500pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
T30RFT6-PA66HS/PA66HIRHS-BK 150-77950
Compare
Add to watchlist
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T30RFT6-PA66HS/PA66HIRHS-BK 150-77950
Fixing tie for edge, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
2-Piece Fixing Tie with EdgeClip for vertical cable routing over the edge.
Compare
T30REC4B-PA66HS/PA66HIRHS-BK 150-76080
Compare
Add to watchlist
2-Piece Fixing Tie with EdgeClip for vertical cable routing over the edge.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T30REC4B-PA66HS/PA66HIRHS-BK 150-76080
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T50R-PA66HS-BK 111-04940
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50R-PA66HS-BK 111-04940
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T50R-PA66HS-BK 111-01252
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50R-PA66HS-BK 111-01252
Connector clip, black, 5000pcs.
Connector clip with fir tree for round holes, to fix cable chanels, brackets and holders.
Compare
CCSCFT6-PA66HIRHS-BK 151-02932
Compare
Add to watchlist
Connector clip with fir tree for round holes, to fix cable chanels, brackets and holders.
Compare
Compare
Add to watchlist
5000 pcs.
Black (BK) CCSCFT6-PA66HIRHS-BK 151-02932
Cable tie inside serrated, 252.0x4.8mm, ⌀12-65mm, white, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
BDG cable ties are environmentally friendly and manufactured from a sustainable bioplastic.
Compare
BDG250-PLA-WH 111-90025
Compare
Add to watchlist
BDG cable ties are environmentally friendly and manufactured from a sustainable bioplastic.
Compare
Compare
Add to watchlist
100 pcs.
White (WH) BDG250-PLA-WH 111-90025
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Fixing tie for hole (round), inside serrated, ⌀5.0-35.0mm, black, 500pcs.
2-Piece Fixing Tie for round holes with fir tree and disc.
Compare
T30RFT5-PA66HS/PA66HIRHS-BK 150-55850
Compare
Add to watchlist
2-Piece Fixing Tie for round holes with fir tree and disc.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T30RFT5-PA66HS/PA66HIRHS-BK 150-55850
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
CTAM mounts for applications with limited space.
Compare
CTAM1-PEEK-BGE 151-00757
Compare
Add to watchlist
CTAM mounts for applications with limited space.
Compare
Compare
Add to watchlist
100 pcs.
Beige (BGE) CTAM1-PEEK-BGE 151-00757
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18I-PA66-BK 111-02370
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T18I-PA66-BK 111-02370
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
T18R-PA66W-BK 111-01914
Compare
Add to watchlist
Head design guarantees high tensile strength and a low insertion force.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66W-BK 111-01914
Cable tie inside serrated, 252.0x4.8mm, ⌀12-65mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Compare
BDG250-PLAW-BK 111-90026
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) BDG250-PLAW-BK 111-90026
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Releasable cable tie, 100x7.0mm, ⌀1.6-23.0mm, 170N, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RT-Series with high tensile strength
Compare
RT100-PA12-BK 131-11120
Compare
Add to watchlist
RT-Series with high tensile strength
Compare
Compare
Add to watchlist
100
Black (BK) RT100-PA12-BK 131-11120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T150R(H)-PA66HS-NA 111-15069
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T150R(H)-PA66HS-NA 111-15069
Cable clip for stud, Dmin=6mm, Dmax=12mm, ⌀5 mm
Compare
7703079897-PA66HIRHS-BK 151-00410
Compare
Add to watchlist
Compare
Compare
Add to watchlist
450 pcs.
Black (BK) 7703079897-PA66HIRHS-BK 151-00410
P-clamp closed, Dmin=17.4mm, Dmax=20.0mm, ⌀4.0 mm, black, 200pcs.
Compare
NX11-PA66-BK 221-10110
Compare
Add to watchlist
Compare
Compare
Add to watchlist
200 pcs.
Black (BK) NX11-PA66-BK 221-10110
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Compare
T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903
Compare
Add to watchlist
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for side cable routing.
Compare
T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581
Compare
Add to watchlist
2-piece fixing tie with EdgeClip for side cable routing.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Compare
T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020
Compare
Add to watchlist
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225.0mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T120L-PA66HS-BK 111-12440
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) T120L-PA66HS-BK 111-12440
Cable clip for hole (round), ⌀7.8 - 8.2 mm
Compare
CTCLPROFILE-PA66HIRHS-BK 151-00026
Compare
Add to watchlist
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) CTCLPROFILE-PA66HIRHS-BK 151-00026
Cable clip for adhesive use/with pipe/tube holder
Compare
SACTC12-MET-WH 151-00128
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
White (WH) SACTC12-MET-WH 151-00128
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Screw fixing mount TY3F1.
Compare
TY8F1-PA66-NA 151-00568
Compare
Add to watchlist
Screw fixing mount TY3F1.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) TY8F1-PA66-NA 151-00568
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Flexible head wraps around cable bundle for easy installation.
Compare
RT50RS5-PA66-BK 115-07110
Compare
Add to watchlist
Flexible head wraps around cable bundle for easy installation.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) RT50RS5-PA66-BK 115-07110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=12mm
Self adhesive one piece fixing clips RB14 and RB20.
Compare
RB12VHB-PA66-NA 151-13612
Compare
Add to watchlist
Self adhesive one piece fixing clips RB14 and RB20.
Compare
Compare
Add to watchlist
200 pcs.
Natural (NA) RB12VHB-PA66-NA 151-13612
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 1000pcs.
KR6G5 Srew Fixing Mounts with curved design
Compare
KR6G5-PA66-NA 151-00887
Compare
Add to watchlist
KR6G5 Srew Fixing Mounts with curved design
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) KR6G5-PA66-NA 151-00887
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 500pcs.
Compare
CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Compare
Add to watchlist
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Cable tie inside serrated, 198.0x3.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
T30L-PA66-NA 111-03325
Compare
Add to watchlist
Head design guarantees high tensile strength and a low insertion force.
Compare
Compare
Add to watchlist
100
Natural (NA) T30L-PA66-NA 111-03325
Cable tie inside serrated, 180x4.0mm, ⌀1.5-40.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T40R-PA66HS-BK 111-01618
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T40R-PA66HS-BK 111-01618
Releasable cable tie, 250x9.0mm, ⌀1.6-71.0mm, 190N, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RT-Series with high tensile strength
Compare
RT250-PA12-BK 131-12520
Compare
Add to watchlist
RT-Series with high tensile strength
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) RT250-PA12-BK 131-12520
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 200x7.6mm, ⌀50.0mm, black, 500pcs.
Chassis-Fixing-Ties BHT375 for restricted space areas
Compare
BHT203M-PA66HS-BK 150-20396
Compare
Add to watchlist
Chassis-Fixing-Ties BHT375 for restricted space areas
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) BHT203M-PA66HS-BK 150-20396
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100mm, black, 50pcs.
Compare
CT375-PA66HS-BK 132-37530
Compare
Add to watchlist
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) CT375-PA66HS-BK 132-37530
Cable tie mount for edge, Wmax=7.9mm, black, 200pcs.
Beam Clamp with foam for Edges 7.0 - 8.5 mm.
Compare
Beam Clamp B with foam-PA6GF30-BK 151-01186
Compare
Add to watchlist
Beam Clamp with foam for Edges 7.0 - 8.5 mm.
Compare
Compare
Add to watchlist
200 pcs.
Black (BK) Beam Clamp B with foam-PA6GF30-BK 151-01186
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.5 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Screw fixing mount TY3F1.
Compare
TY3F1-PA66-NA 151-02156
Compare
Add to watchlist
Screw fixing mount TY3F1.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) TY3F1-PA66-NA 151-02156
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18R-PA66W-BK 111-01960
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66W-BK 111-01960
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles. 
Compare
T30MR-PA66-NA 113-03019
Compare
Add to watchlist
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles. 
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T30MR-PA66-NA 113-03019
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
TC4FT6LG-PA66HIRHS-BK 151-00215
Compare
Add to watchlist
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
Compare
Add to watchlist
10000 pcs.
Black (BK) TC4FT6LG-PA66HIRHS-BK 151-00215
Cable clip
Compare
Harness Clip 1-10-PA12-BK 151-02069
Compare
Add to watchlist
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) Harness Clip 1-10-PA12-BK 151-02069
Cable clip
Compare
Harness Cip 10-20-PA12-BK 151-02070
Compare
Add to watchlist
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) Harness Cip 10-20-PA12-BK 151-02070
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T30R-PA66-NA 111-03039
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) T30R-PA66-NA 111-03039
Stainless steel cable tie, ball bearing lock, 300x4.6mm, ⌀12-75mm, black, 100pcs.
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
MBT12SFC-SS316L/SP-BK 111-01437
Compare
Add to watchlist
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) MBT12SFC-SS316L/SP-BK 111-01437
Corrugated tube clip for stud, nom⌀13.0mm, black, 500pcs.
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Compare
CTC13SBS6-PA66HIRHS-BK 151-00703
Compare
Add to watchlist
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) CTC13SBS6-PA66HIRHS-BK 151-00703
Corrugated tube clip for stud, nom⌀4.5mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
CTC4.5SBS6-PA66HIRHS-BK 151-00700
Compare
Add to watchlist
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) CTC4.5SBS6-PA66HIRHS-BK 151-00700
Corrugated tube clip for stud, nom⌀7.5mm, black, 500pcs.
Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.
Compare
CTC7.5SBS6-PA66HIRHS-BK 151-00701
Compare
Add to watchlist
Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) CTC7.5SBS6-PA66HIRHS-BK 151-00701
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Compare
C1-PA6HIR-BK 201-10010
Compare
Add to watchlist
C3-N66-BK.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) C1-PA6HIR-BK 201-10010
Cable clip for hole (round), Dmin=1.0mm
R1 protective strap to hold wires down effortlessly.
Compare
R1-PVC-BK 201-20010
Compare
Add to watchlist
R1 protective strap to hold wires down effortlessly.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) R1-PVC-BK 201-20010
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Compare
R2-PVC-BK 201-20020
Compare
Add to watchlist
R1 protective strap to hold wires down effortlessly.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) R2-PVC-BK 201-20020
Cable tie inside serrated, 535x13.1mm, ⌀12-150mm, natural, 50pcs.
Special design offers a release feature for quick and easy access to wire bundles.
Compare
T250R-PA66HS-NA 111-01039
Compare
Add to watchlist
Special design offers a release feature for quick and easy access to wire bundles.
Compare
Compare
Add to watchlist
50 pcs.
Natural (NA) T250R-PA66HS-NA 111-01039
Cable tie inside serrated, 535x13.1mm, ⌀12-150mm, black, 50pcs.
Releasable cable tie REL250-Series.
Compare
T250R-PA66HS-BK 111-02286
Compare
Add to watchlist
Releasable cable tie REL250-Series.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) T250R-PA66HS-BK 111-02286
Cable tie inside serrated, 260x3.3mm, ⌀1.5-65.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T30LR-PA66HS-NA 111-04401
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T30LR-PA66HS-NA 111-04401
Cable tie inside serrated, 148.0x3.6mm, ⌀1.5-35.0mm, natural, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
T30R-PA66-NA 112-03019
Compare
Add to watchlist
Head design guarantees high tensile strength and a low insertion force.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T30R-PA66-NA 112-03019
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
T50I-PA66W-BK 111-00470
Compare
Add to watchlist
Head design guarantees high tensile strength and a low insertion force.
Compare
Compare
Add to watchlist
1000
Black (BK) T50I-PA66W-BK 111-00470
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T50L-PA66HS-NA 111-05655
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T50L-PA66HS-NA 111-05655
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T150R-PA66HS-BK 111-01255
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T150R-PA66HS-BK 111-01255
Cable tie outside serrated, 150x4.6mm, ⌀1.6-35.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Compare
T50SOS-PA66W-BK 118-05860
Compare
Add to watchlist
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOS-PA66W-BK 118-05860
Fixing tie for hole (round), outside serrated, ⌀12.0-41.0mm, black, 100pcs.
One Piece Fixing Tie with Rivet RI 160.
Compare
RI160-PA12-BK 131-14160
Compare
Add to watchlist
One Piece Fixing Tie with Rivet RI 160.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) RI160-PA12-BK 131-14160
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
LKM-PA66-BK 151-26301
Compare
Add to watchlist
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) LKM-PA66-BK 151-26301
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100mm, black, 50pcs.
Compare
CT375-PA66HS-BK 132-37510
Compare
Add to watchlist
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) CT375-PA66HS-BK 132-37510
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀4.5 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Screw fixing mount TY3F1.
Compare
TY8F1-PA66-NA 151-02157
Compare
Add to watchlist
Screw fixing mount TY3F1.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) TY8F1-PA66-NA 151-02157
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, T=6.0 - 8.0mm, black/silver, 96pcs.
2-piece edge clip for heavy duty 6-8mm pre-assembled
Compare
HDEC6-8-PA6GF30/C75S-BK/SR 156-03628
Compare
Add to watchlist
2-piece edge clip for heavy duty 6-8mm pre-assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK), Silver (SR) HDEC6-8-PA6GF30/C75S-BK/SR 156-03628
Cable tie mount for edge, T=8.0 - 10.0mm, black, 96pcs.
2-piece edge clip for heavy duty 8-10mm pre-assembled
Compare
HDEC8-10-PA6GF30/C75S-BK 156-03627
Compare
Add to watchlist
2-piece edge clip for heavy duty 8-10mm pre-assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK) HDEC8-10-PA6GF30/C75S-BK 156-03627
Cable tie mount for edge, T=12.0 - 14.0mm, black, 96pcs.
2-piece edge clip for heavy duty 12-14mm pre-assembled
Compare
HDEC12-14-PA6GF30/C75S-BK 156-03629
Compare
Add to watchlist
2-piece edge clip for heavy duty 12-14mm pre-assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK) HDEC12-14-PA6GF30/C75S-BK 156-03629
Cable tie mount for edge, T=14.0 - 16.0mm, black, 96pcs.
2-piece edge clip for heavy duty 14-16mm pre-assembled
Compare
HDEC14-16-PA6GF30/C75S-BK 156-03630
Compare
Add to watchlist
2-piece edge clip for heavy duty 14-16mm pre-assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK) HDEC14-16-PA6GF30/C75S-BK 156-03630
Cable tie mount for edge, T=12.0 - 14.0mm, black, 96pcs.
2-piece edge clip for heavy duty 12-14mm assembled
Compare
HDEC12-14-PRE-PA6GF30/C75S-BK 156-03634
Compare
Add to watchlist
2-piece edge clip for heavy duty 12-14mm assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK) HDEC12-14-PRE-PA6GF30/C75S-BK 156-03634
Cable tie mount for edge, T=14.0 - 16.0mm, black, 96pcs.
2-piece edge clip for heavy duty 14-16mm assembled
Compare
HDEC14-16-PRE-PA6GF30/C75S-BK 156-03635
Compare
Add to watchlist
2-piece edge clip for heavy duty 14-16mm assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK) HDEC14-16-PRE-PA6GF30/C75S-BK 156-03635
Cable tie mount for edge, T=6.0 - 8.0mm, black, 96pcs.
2-piece edge clip for heavy duty 6-8mm assembled
Compare
HDEC6-8-PRE-PA6GF30/C75S-BK 156-03631
Compare
Add to watchlist
2-piece edge clip for heavy duty 6-8mm assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK) HDEC6-8-PRE-PA6GF30/C75S-BK 156-03631
Cable tie mount for edge, T=8.0 - 10.0mm, black, 96pcs.
2-piece edge clip for heavy duty 8-10mm assembled
Compare
HDEC8-10-PRE-PA6GF30/C75S-BK 156-03632
Compare
Add to watchlist
2-piece edge clip for heavy duty 8-10mm assembled
Compare
Compare
Add to watchlist
96 pcs.
Black (BK) HDEC8-10-PRE-PA6GF30/C75S-BK 156-03632
Cable tie inside serrated for multiple routing, 305.0x4.7mm, ⌀1.6-76.2mm, black, 1000pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
T50IDH-PA66HS-BK 117-05350
Compare
Add to watchlist
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) T50IDH-PA66HS-BK 117-05350
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
Compare
CCOVAL2-PA66HIRHSUV-BK 151-01108
Compare
Add to watchlist
Compare
Compare
Add to watchlist
5000 pcs.
Black (BK) CCOVAL2-PA66HIRHSUV-BK 151-01108
Cable clip for edge, T=2.0 - 6.0mm, Dmax=5.8mm
Compare
CBT2-6-POM-BK 150-83260
Compare
Add to watchlist
Compare
Compare
Add to watchlist
1800 pcs.
Black (BK) CBT2-6-POM-BK 150-83260
Blind plug, ⌀4.9 - 5.1 mm, T=5.8mm, black, 200pcs.
Fixing pin PF1 - PF2
Compare
PF2-PA66W-BK 241-00013
Compare
Add to watchlist
Fixing pin PF1 - PF2
Compare
Compare
Add to watchlist
200 pcs.
Black (BK) PF2-PA66W-BK 241-00013
CP8.0-PA66HSW-BK
Compare
CP8.0-PA66HSW-BK 151-04878
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) CP8.0-PA66HSW-BK 151-04878
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18I-PA66-NA 111-02319
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T18I-PA66-NA 111-02319
Stainless steel cable tie, ball bearing lock, 300x4.6mm, ⌀12-80mm, metal, 100pcs.
Stainless steel cable ties, uncoated, MBT_SS, MBT_HS.
Compare
MBT12SS-SS304-ML 111-01433
Compare
Add to watchlist
Stainless steel cable ties, uncoated, MBT_SS, MBT_HS.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT12SS-SS304-ML 111-01433
Stainless steel cable tie, ball bearing lock, 521x4.6mm, ⌀12-152mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT20S-SS316-ML 111-01946
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT20S-SS316-ML 111-01946
Stainless steel cable tie, ball bearing lock, 681x4.6mm, ⌀12-203mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT27S-SS316-ML 111-01947
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT27S-SS316-ML 111-01947
Stainless steel cable tie, ball bearing lock, 838x4.6mm, ⌀12-254mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT33S-SS316-ML 111-02337
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT33S-SS316-ML 111-02337
Stainless steel cable tie, ball bearing lock, 127x4.6mm, ⌀12-25mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT5S-SS316-ML 111-01943
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT5S-SS316-ML 111-01943
Stainless steel cable tie, ball bearing lock, 201x4.6mm, ⌀12-50mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT8S-SS316-ML 111-01944
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT8S-SS316-ML 111-01944
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H11P-PA66-NA 211-60119
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H13P-PA66-NA 211-60139
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
500 pcs.
Natural (NA) H13P-PA66-NA 211-60139
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H15P-PA66-NA 211-60159
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
500 pcs.
Natural (NA) H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H16P-PA66-NA 211-60169
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
500 pcs.
Natural (NA) H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU11-AL-NA 211-10110
Compare
Add to watchlist
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU19C-AL/CR-BK 211-15190
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
ALU23C P-Clamp with chloroprene insert.
Compare
ALU23C-AL/CR-BK 211-15230
Compare
Add to watchlist
ALU23C P-Clamp with chloroprene insert.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU24C-AL/CR-BK 211-15240
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU26C-AL/CR-BK 211-15260
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU28C-AL/CR-BK 211-15280
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU30C-AL/CR-BK 211-15300
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU34C-AL/CR-BK 211-15340
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T120L-PA66HS-NA 111-12449
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
50 pcs.
Natural (NA) T120L-PA66HS-NA 111-12449
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225.0mm, black, 50pcs.
Compare
T120L-PA66W-BK 111-12460
Compare
Add to watchlist
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) T120L-PA66W-BK 111-12460
Cable tie inside serrated, 101.6x2.5mm, ⌀1.5-22.0mm, black, 200pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18R-PA66HS-BK 111-01803
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
200 pcs.
Black (BK) T18R-PA66HS-BK 111-01803
Cable tie inside serrated, 80x2.2mm, ⌀1.0-16.0mm, natural, 1000pcs.
Compare
T18S-PA46-NA 114-00879
Compare
Add to watchlist
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) T18S-PA46-NA 114-00879
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
Compare
T30R-PA46-NA 114-03379
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T30R-PA46-NA 114-03379
Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T50I-PA66HS-NA 111-05259
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T50I-PA66HS-NA 111-05259
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T50L-PA66HS-BK 111-01272
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50L-PA66HS-BK 111-01272
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T120R(E)-PA66W-BK 111-01966
Compare
Add to watchlist
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T120R(E)-PA66W-BK 111-01966
Cable tie inside serrated for multiple routing, 305.0x4.7mm, ⌀1.6-76.2mm, natural, 100pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
T50IDH-PA66-NA 117-05302
Compare
Add to watchlist
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) T50IDH-PA66-NA 117-05302

Results for "12" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  United Arab Emirates

Social Media

© HellermannTyton 2026 (v4.312.2)  |  Update: 25/07/2026  |  Privacy Settings
Contact