Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
27/08/2025

Results for "D-Clip Series"

12,519 products found 14 further hits
Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (5828)

Cable Ties Inside Serrated  (1899) Cable Ties Outside Serrated  (130) Cable Ties Without Serration  (81) Cable Ties, Releasable  (310) Cable Ties, Stainless Steel  (229) Cable Ties With Fixing Elements  (1094) Cable Tie Mounts  (554) Fixing Elements  (343) Clips, Clamps and Plugs  (1663)
Cable Ties and Fixings
Cable Ties and Fixings (5828)
Insulation

Insulation  (3830)

Heat Shrink Tubing  (456) Heat Shrinkable Moulded Shapes  (3208) Insulating tubes  (168)
Insulation
Insulation (3830)
Cable Protection Systems

Cable Protection Systems  (1029)

Non-Metallic Conduit Systems  (12) Spiral-Reinforced Conduit Systems  (251) Conduit System Accessories  (80) Protective Tubing and Spiral Binding  (173) Expandable Braided Sleeves  (204) Open Woven Sleeves  (208) Grommets  (61) Wiring Ducts and Accessories  (245)
Cable Protection Systems
Cable Protection Systems (1029)
Electrical Installation

Electrical Installation  (8)

Wire Connectors  (8)
Electrical Installation
Electrical Installation (8)
Identification Systems

Identification Systems  (1452)

Wire and Cable Markers  (1170) Control Panel Labelling  (49) Industrial Identification  (78) RFID tags and cable ties  (69) Security Labeling  (101) Hazardous Area Identification  (11) Printers and Software  (10)
Identification Systems
Identification Systems (1452)
Application Tooling

Application Tooling  (66)

Automatic Cable Tying System  (5) Application Tooling for Cable Ties  (46) Application Tooling for Snappers  (4) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (3)
Application Tooling
Application Tooling (66)
Connectivity

Connectivity  (404)

Patch Panels  (5) Data Outlets  (5) Fibre  (12) Cable  (162) Accessories  (134) Enclosures  (86)
Connectivity
Connectivity (404)
12,519 products
Reset all
Low Profile Transition Boots
412H622-625 Series supplied / fully recovered.
Compare
Low Profile Transition Boots
412H623-9-PO-X-BK 422-40110
Compare
Add to watchlist
1 pc.
Black (BK) 412H623-9-PO-X-BK 422-40110
Low Profile Transition Boots
412H622-625 Series supplied / fully recovered.
Compare
Low Profile Transition Boots
412H623-8WW-PEEX-BK 422-40117
Compare
Add to watchlist
5 pcs.
Black (BK) 412H623-8WW-PEEX-BK 422-40117
Low Profile Transition Boots
412H622-625 Series supplied / fully recovered.
Compare
Low Profile Transition Boots
12273162-220-PEEX-BK 422-40124
Compare
Add to watchlist
5 pcs.
Black (BK) 12273162-220-PEEX-BK 422-40124
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
12273242-310-PO-X-BK 422-00227
Compare
Add to watchlist
5 pcs.
Black (BK) 12273242-310-PO-X-BK 422-00227
Stainless steel cable tie, ball bearing lock, 362x7.9mm, ⌀17-102mm, black, 50pcs.
MBT_HFC
Compare
Stainless steel cable tie, ball bearing lock, 362x7.9mm, ⌀17-102mm, black, 50pcs.
MBT14HFC-SS316L/SP-BK 111-00295
Compare
Add to watchlist
50 pcs.
Black (BK) MBT14HFC-SS316L/SP-BK 111-00295
Hook & Loop
Hook and loop grip ties are available in many colors and can be opened and closed numerous times for repositioning or reuse.
Compare
Hook & Loop
GTASST 854-44448
Compare
Add to watchlist
6 pcs.
Black (BK) GTASST 854-44448
Hook & Loop
Low profile grip ties provide reusable, repositionable cable management in tight spaces.
Compare
Hook & Loop
GTLP50X6 854-44399
Compare
Add to watchlist
10 pcs.
Black (BK) GTLP50X6 854-44399
Hook & Loop
Low profile grip ties provide reusable, repositionable cable management in tight spaces.
Compare
Hook & Loop
GTLP50X8 854-44400
Compare
Add to watchlist
10 pcs.
Black (BK) GTLP50X8 854-44400
Cable tie inside serrated, 203.2x2.5mm, ⌀1.5-55.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 203.2x2.5mm, ⌀1.5-55.0mm, black, 100pcs.
T18L-PA66W-BK 111-01973
Compare
Add to watchlist
100 pcs.
Black (BK) T18L-PA66W-BK 111-01973
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.
CTAM mounts for applications with limited space.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.
CTAM1-PEEK-BGE 151-00757
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Beige (BGE) CTAM1-PEEK-BGE 151-00757
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Braided sleeving, nom⌀12.7mm, ⌀12.7-12.7mm, black, 45.7m
Lateral split allows the braided sleeving to open up to accommodate a variety of bundling requirements.
Compare
Braided sleeving, nom⌀12.7mm, ⌀12.7-12.7mm, black, 45.7m
BSSWFR120B-PET-BK 170-03142
Compare
Add to watchlist
45.7 m
Black (BK) BSSWFR120B-PET-BK 170-03142
Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 3000pcs.
The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.
Compare
Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 3000pcs.
T50R-PVDF-GY 111-02447
Compare
Add to watchlist
3000 pcs.
Grey (GY) T50R-PVDF-GY 111-02447
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
Screw mount style creates low insertion and high extraction force.
Compare
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
T50MR-PA66-BK 113-05010
Compare
Add to watchlist
100 pcs.
Black (BK) T50MR-PA66-BK 113-05010
Cable tie inside serrated, 515.0x12.4mm, ⌀12.0-125.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 515.0x12.4mm, ⌀12.0-125.0mm, black, 25pcs.
T250R-PA66HIRHSUV-BK 111-24805
Compare
Add to watchlist
25 pcs.
Black (BK) T250R-PA66HIRHSUV-BK 111-24805
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
T50R-PA66W-BK 111-04913
Compare
Add to watchlist
1000 pcs.
Black (BK) T50R-PA66W-BK 111-04913
Cable tie inside serrated detectable, 301x4.8mm, ⌀10-80mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 301x4.8mm, ⌀10-80mm, blue, 100pcs.
MCTS300-PA66MD-BU 111-01399
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTS300-PA66MD-BU 111-01399
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
12273242-410-PO-X-BK 422-00326
Compare
Add to watchlist
5 pcs.
Black (BK) 12273242-410-PO-X-BK 422-00326
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀5.0-102.0mm, black, 50pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-102.0mm, black, 50pcs.
T120MR-PA66-BK 113-12020
Compare
Add to watchlist
50 pcs.
Black (BK) T120MR-PA66-BK 113-12020
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66W-BK 111-01964
Compare
Add to watchlist
100 pcs.
Black (BK) T50R-PA66W-BK 111-01964
Cable tie inside serrated for multiple routing, 210x4.7mm, ⌀1.6-38.0mm, black, 500pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Cable tie inside serrated for multiple routing, 210x4.7mm, ⌀1.6-38.0mm, black, 500pcs.
T50RDH-PA66W-BK 117-05060
Compare
Add to watchlist
500 pcs.
Black (BK) T50RDH-PA66W-BK 117-05060
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, black, 100pcs.
Mounting bases Q-Mount.
Compare
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, black, 100pcs.
QM30APT-A-PA66-BK 151-02974
Compare
Add to watchlist
100 pcs.
Black (BK) QM30APT-A-PA66-BK 151-02974
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀16.0-100.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀16.0-100.0mm, blue, 100pcs.
MCTPP120R-PPMD-BU 111-01668
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP120R-PPMD-BU 111-01668
Stainless steel cable tie, ball bearing lock, 838.0x16.0mm, ⌀12.0-254.0mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 838.0x16.0mm, ⌀12.0-254.0mm, metal, 50pcs.
MBT33UH-SS316L-ML 111-01304
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33UH-SS316L-ML 111-01304
Stainless steel cable tie, ball bearing lock, 1092.0x16.0mm, ⌀12.0-330.0mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 1092.0x16.0mm, ⌀12.0-330.0mm, metal, 25pcs.
MBT43UH-SS316L-ML 111-01305
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT43UH-SS316L-ML 111-01305
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
T30R-PA66W-BK 111-01974
Compare
Add to watchlist
100 pcs.
Black (BK) T30R-PA66W-BK 111-01974
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Compare
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
DCT11-PA66HIRHSUV-BK 115-00144
Compare
Add to watchlist
100 pcs.
Black (BK) DCT11-PA66HIRHSUV-BK 115-00144
Bottle Shape with External Rib VG-Style for Plugs black, PO-X
199-4-G supplied / fully recovered.
Compare
Bottle Shape with External Rib VG-Style for Plugs black, PO-X
199-6-G-PO-X-BK 401-99007
Compare
Add to watchlist
1 pcs.
Black (BK) 199-6-G-PO-X-BK 401-99007
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
313C743-8-PEEX-BK 422-00217
Compare
Add to watchlist
5 pcs.
Black (BK) 313C743-8-PEEX-BK 422-00217
Low Profile Transition Boots
412H622-625 Series supplied / fully recovered.
Compare
Low Profile Transition Boots
12273162-110-PO-X-BK 422-40021
Compare
Add to watchlist
5 pcs.
Black (BK) 12273162-110-PO-X-BK 422-40021
Long Outlet Shape, VG style
135-1 supplied / fully recovered.
Compare
Long Outlet Shape, VG style
132-4-JW8-PO-X-BK 401-32041
Compare
Add to watchlist
1 EA
Black (BK) 132-4-JW8-PO-X-BK 401-32041
Braided sleeving, nom⌀19.1mm, ⌀19.1-19.1mm, black, 30.48m
Lateral split allows the braided sleeving to open up to accommodate a variety of bundling requirements.
Compare
Braided sleeving, nom⌀19.1mm, ⌀19.1-19.1mm, black, 30.48m
BSSWFR340B-PET-BK 170-03143
Compare
Add to watchlist
30.48 m
Black (BK) BSSWFR340B-PET-BK 170-03143
Low Profile Shim Boots
313E445-457 Series supplied / fully recovered.
Compare
Low Profile Shim Boots
12273164-120-PEEX-BK 422-10020
Compare
Add to watchlist
5 pcs.
Black (BK) 12273164-120-PEEX-BK 422-10020
Bottle Shapes, MIL style
100 series supplied / fully recovered.
Compare
Bottle Shapes, MIL style
104-4-GWM250-PO-X-BK 401-04025
Compare
Add to watchlist
1 pcs.
Black (BK) 104-4-GWM250-PO-X-BK 401-04025
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
WSRFT9B-PA66HIRHSUV-BK 156-00074
Compare
Add to watchlist
100 pcs.
Black (BK) WSRFT9B-PA66HIRHSUV-BK 156-00074
Right-Angle Shapes, VG style
1152-4-G recovered onto a connector.
Compare
Right-Angle Shapes, VG style
1158-6-HW21-PO-X-BK 411-58573
Compare
Add to watchlist
1 pcs.
Black (BK) 1158-6-HW21-PO-X-BK 411-58573
Right-Angle Shapes, VG style/MIL style
1123-1-G supplied / fully recovered.
Compare
Right-Angle Shapes, VG style/MIL style
1124-4-G-PO-X-BK 411-24009
Compare
Add to watchlist
1 EA
Black (BK) 1124-4-G-PO-X-BK 411-24009
Right-Angle Shapes, VG style/MIL style
Compare
Right-Angle Shapes, VG style/MIL style
1124-4-J-PO-X-BK 411-24012
Compare
Add to watchlist
1 EA
Black (BK) 1124-4-J-PO-X-BK 411-24012
T-Shapes
1217-1 supplied / fully recovered.
Compare
T-Shapes
1223-1-G-PO-X-BK 412-23002
Compare
Add to watchlist
1 pc.
Black (BK) 1223-1-G-PO-X-BK 412-23002
GSR Graduated Strain Relief
1751-1 supplied / fully recovered.
Compare
GSR Graduated Strain Relief
1755-1-H-250-PO-X-BK 417-55002
Compare
Add to watchlist
1 pc.
Black (BK) 1755-1-H-250-PO-X-BK 417-55002
Braided sleeving, nom⌀3.18mm, ⌀2.54-3.2mm, black, 121.92m
Lateral split allows the braided sleeving to open up to accommodate a variety of bundling requirements.
Compare
Braided sleeving, nom⌀3.18mm, ⌀2.54-3.2mm, black, 121.92m
BSSWFR180B-PET-BK 170-03140
Compare
Add to watchlist
121.92 m
Black (BK) BSSWFR180B-PET-BK 170-03140
Braided sleeving, nom⌀6.4mm, ⌀2.54-6.4mm, black, 60.96m
Lateral split allows the braided sleeving to open up to accommodate a variety of bundling requirements.
Compare
Braided sleeving, nom⌀6.4mm, ⌀2.54-6.4mm, black, 60.96m
BSSWFR140B-PET-BK 170-03141
Compare
Add to watchlist
60.96 m
Black (BK) BSSWFR140B-PET-BK 170-03141
Braided sleeving, nom⌀25.4mm, ⌀25.4-25.4mm, black, 30.48m
Lateral split allows the braided sleeving to open up to accommodate a variety of bundling requirements.
Compare
Braided sleeving, nom⌀25.4mm, ⌀25.4-25.4mm, black, 30.48m
BSSWFR100B-PET-BK 170-03144
Compare
Add to watchlist
30.48 m
Black (BK) BSSWFR100B-PET-BK 170-03144
Braided sleeving, nom⌀38.1mm, ⌀2.54-38.1mm, black, 22.86m
Lateral split allows the braided sleeving to open up to accommodate a variety of bundling requirements.
Compare
Braided sleeving, nom⌀38.1mm, ⌀2.54-38.1mm, black, 22.86m
BSSWFR1120B-PET-BK 170-03146
Compare
Add to watchlist
22.86 m
Black (BK) BSSWFR1120B-PET-BK 170-03146
Braided sleeving, nom⌀50.8mm, ⌀2.54-50.8mm, black, 15.24m
Lateral split allows the braided sleeving to open up to accommodate a variety of bundling requirements.
Compare
Braided sleeving, nom⌀50.8mm, ⌀2.54-50.8mm, black, 15.24m
BSSWFR200B-PET-BK 170-03147
Compare
Add to watchlist
15.24 m
Black (BK) BSSWFR200B-PET-BK 170-03147
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
313C722-PO-X-BK 422-00007
Compare
Add to watchlist
5 pcs.
Black (BK) 313C722-PO-X-BK 422-00007
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
313C732-9-PO-X-BK 422-00131
Compare
Add to watchlist
100 pcs.
Black (BK) 313C732-9-PO-X-BK 422-00131
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
313C743-9-200BF1-PO-X-BK 422-00226
Compare
Add to watchlist
100 pcs.
Black (BK) 313C743-9-200BF1-PO-X-BK 422-00226
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
12273242-320-PEEX-BK 422-00228
Compare
Add to watchlist
5 pcs.
Black (BK) 12273242-320-PEEX-BK 422-00228
Low Profile Convolute Boots
313C722-774 Series supplied / fully recovered.
Compare
Low Profile Convolute Boots
313C764-8-PEEX-BK 422-00411
Compare
Add to watchlist
5 pcs.
Black (BK) 313C764-8-PEEX-BK 422-00411
Low Profile Shim Boots
313E445-457 Series supplied / fully recovered.
Compare
Low Profile Shim Boots
12273164-420-PEEX-BK 422-10313
Compare
Add to watchlist
5 pcs.
Black (BK) 12273164-420-PEEX-BK 422-10313
Low Profile Transition Boots
573H532-535 Series supplied / fully recovered.
Compare
Low Profile Transition Boots
573H534-9-PO-X-BK 422-60204
Compare
Add to watchlist
5 pcs.
Black (BK) 573H534-9-PO-X-BK 422-60204
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
T50SOSFT6D10E-PA46-GY 157-00028
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SOSFT6D10E-PA46-GY 157-00028
Heat Shrinkable Tubing 3:1 on a Reel 6/2 transparent
Compare
Heat Shrinkable Tubing 3:1 on a Reel 6/2 transparent
HIS-3-6/2-PO-X-CL 308-30603
Compare
Add to watchlist
1 pcs.
Transparent (CL) HIS-3-6/2-PO-X-CL 308-30603
Fluoroelastomer Heat Shrinkable Tubing 2:1 12.7/6.4 black
Viton®-E for flexibility and protection against aggressive chemicals.
Compare
Fluoroelastomer Heat Shrinkable Tubing 2:1 12.7/6.4 black
VITON®-E-12.7/6.4-FPMX-BK 330-01270
Compare
Add to watchlist
25 metre
Black (BK) VITON®-E-12.7/6.4-FPMX-BK 330-01270
Fluoroelastomer Heat Shrinkable Tubing 2:1 19.0/9.5 black
Viton®-E for flexibility and protection against aggressive chemicals.
Compare
Fluoroelastomer Heat Shrinkable Tubing 2:1 19.0/9.5 black
VITON®-E-19.0/9.5-FPMX-BK 330-01900
Compare
Add to watchlist
25 metre
Black (BK) VITON®-E-19.0/9.5-FPMX-BK 330-01900
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
The 1-piece design of Aerial Support Ties reduces installation time.
Compare
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
TAS120L-PA66HIRHSUV-BK 111-01672
Compare
Add to watchlist
500 pcs.
Black (BK) TAS120L-PA66HIRHSUV-BK 111-01672
Hook & Loop
UL 94 V-2 flame rated material allows use in air handling spaces.
Compare
Hook & Loop
GT.50X12 854-44334
Compare
Add to watchlist
10 pcs.
Redbrown (RDBN) GT.50X12 854-44334
Hook & Loop
UL 94 V-2 flame rated material allows use in air handling spaces.
Compare
Hook & Loop
GT.50X6 854-44352
Compare
Add to watchlist
10 pcs.
Redbrown (RDBN) GT.50X6 854-44352
Hook & Loop
UL 94 V-2 flame rated material allows use in air handling spaces.
Compare
Hook & Loop
GT.50X8 854-44368
Compare
Add to watchlist
10 pcs.
Redbrown (RDBN) GT.50X8 854-44368
Heat Shrinkable Tubing 3:1 on a Reel 24/8 transparent
Compare
Heat Shrinkable Tubing 3:1 on a Reel 24/8 transparent
HIS-3-24/8-PO-X-CL 308-32403
Compare
Add to watchlist
1 pcs.
Transparent (CL) HIS-3-24/8-PO-X-CL 308-32403
Cable grommet, ⌀6.4 mm, black, 2000pcs.
Edge Protection Grommet - HV1201.
Compare
Cable grommet, ⌀6.4 mm, black, 2000pcs.
HV1201-PVC-FR-BK 633-02010
Compare
Add to watchlist
2000 pcs.
Black (BK) HV1201-PVC-FR-BK 633-02010
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 6/2 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Compare
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 6/2 black
EPS-300-6/2-PO-X-BK 340-06020
Compare
Add to watchlist
300 metre
Black (BK) EPS-300-6/2-PO-X-BK 340-06020
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 red
Compare
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 red
HIS-3-1.5/0.5-PO-X-RD 308-30152
Compare
Add to watchlist
1 pcs.
Red (RD) HIS-3-1.5/0.5-PO-X-RD 308-30152
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 blue
Compare
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 blue
HIS-3-1.5/0.5-PO-X-BU 308-30156
Compare
Add to watchlist
1 pcs.
Blue (BU) HIS-3-1.5/0.5-PO-X-BU 308-30156
Heat Shrinkable Tubing 3:1 on a Reel 3/1 red
Compare
Heat Shrinkable Tubing 3:1 on a Reel 3/1 red
HIS-3-3/1-PO-X-RD 308-30302
Compare
Add to watchlist
1 pcs.
Red (RD) HIS-3-3/1-PO-X-RD 308-30302
Heat Shrinkable Tubing 3:1 on a Reel 6/2 red
Compare
Heat Shrinkable Tubing 3:1 on a Reel 6/2 red
HIS-3-6/2-PO-X-RD 308-30602
Compare
Add to watchlist
1 pcs.
Red (RD) HIS-3-6/2-PO-X-RD 308-30602
Heat Shrinkable Tubing 3:1 on a Reel 6/2 blue
Compare
Heat Shrinkable Tubing 3:1 on a Reel 6/2 blue
HIS-3-6/2-PO-X-BU 308-30606
Compare
Add to watchlist
1 pcs.
Blue (BU) HIS-3-6/2-PO-X-BU 308-30606
Heat Shrinkable Tubing 3:1 on a Reel 9/3 blue
Compare
Heat Shrinkable Tubing 3:1 on a Reel 9/3 blue
HIS-3-9/3-PO-X-BU 308-30906
Compare
Add to watchlist
1 pcs.
Blue (BU) HIS-3-9/3-PO-X-BU 308-30906
Heat Shrinkable Tubing 3:1 on a Reel 12/4 transparent
Compare
Heat Shrinkable Tubing 3:1 on a Reel 12/4 transparent
HIS-3-12/4-PO-X-CL 308-31203
Compare
Add to watchlist
1 pcs.
Transparent (CL) HIS-3-12/4-PO-X-CL 308-31203
Heat Shrinkable Tubing 3:1 on a Reel 18/6 red
Compare
Heat Shrinkable Tubing 3:1 on a Reel 18/6 red
HIS-3-18/6-PO-X-RD 308-31802
Compare
Add to watchlist
1 pcs.
Red (RD) HIS-3-18/6-PO-X-RD 308-31802
Heat Shrinkable Tubing 3:1 on a Reel 18/6 transparent
Compare
Heat Shrinkable Tubing 3:1 on a Reel 18/6 transparent
HIS-3-18/6-PO-X-CL 308-31803
Compare
Add to watchlist
1 pcs.
Transparent (CL) HIS-3-18/6-PO-X-CL 308-31803
Heat Shrinkable Tubing 3:1 on a Reel 24/8 red
Compare
Heat Shrinkable Tubing 3:1 on a Reel 24/8 red
HIS-3-24/8-PO-X-RD 308-32402
Compare
Add to watchlist
1 pcs.
Red (RD) HIS-3-24/8-PO-X-RD 308-32402
Heat Shrinkable Tubing 2:1 on a Reel 1,2/0,6 transparent
HIS Pack Heat Shrink Tubing 2:1 Dispenser Box. Perfect fit.
Compare
Heat Shrinkable Tubing 2:1 on a Reel 1,2/0,6 transparent
HIS-PACK-1.2/0.6-PO-X-CL 300-30123
Compare
Add to watchlist
1 pcs.
Transparent (CL) HIS-PACK-1.2/0.6-PO-X-CL 300-30123
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 brown
Compare
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 brown
HIS-PACK-4.8/2.4-PO-X-BN 300-30481
Compare
Add to watchlist
1 pcs.
Brown (BN) HIS-PACK-4.8/2.4-PO-X-BN 300-30481
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 transparent
HIS Pack Heat Shrink Tubing 2:1 Dispenser Box. Perfect fit.
Compare
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 transparent
HIS-PACK-4.8/2.4-PO-X-CL 300-30483
Compare
Add to watchlist
1 pcs.
Transparent (CL) HIS-PACK-4.8/2.4-PO-X-CL 300-30483
Heat Shrinkable Tubing 2:1 on a Reel 6,4/3,2 brown
Compare
Heat Shrinkable Tubing 2:1 on a Reel 6,4/3,2 brown
HIS-PACK-6.4/3.2-PO-X-BN 300-30641
Compare
Add to watchlist
1 pcs.
Brown (BN) HIS-PACK-6.4/3.2-PO-X-BN 300-30641
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 brown
Compare
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 brown
HIS-PACK-9.5/4.7-PO-X-BN 300-30951
Compare
Add to watchlist
1 pcs.
Brown (BN) HIS-PACK-9.5/4.7-PO-X-BN 300-30951
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 brown
Compare
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 brown
HIS-PACK-19.1/9.5-PO-X-BN 300-31901
Compare
Add to watchlist
1 pcs.
Brown (BN) HIS-PACK-19.1/9.5-PO-X-BN 300-31901
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 blue
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 blue
HFT-A-2.4/1.2-PO-X-BU 305-02406
Compare
Add to watchlist
100 metre
Blue (BU) HFT-A-2.4/1.2-PO-X-BU 305-02406
Cable grommet, ⌀9.5 mm, black, 1000pcs.
Edge Protection Grommet - HV1208.
Compare
Cable grommet, ⌀9.5 mm, black, 1000pcs.
HV1208-PVC-FR-BK 633-02080
Compare
Add to watchlist
1000 pcs.
Black (BK) HV1208-PVC-FR-BK 633-02080
Cable grommet, ⌀11.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1302.
Compare
Cable grommet, ⌀11.0 mm, black, 1000pcs.
HV1302-PVC-FR-BK 633-03020
Compare
Add to watchlist
1000 pcs.
Black (BK) HV1302-PVC-FR-BK 633-03020
Heat Shrinkable Tubing 3:1 (9/3 mm), thin wall, adhesive lined, 150m
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Compare
Heat Shrinkable Tubing 3:1 (9/3 mm), thin wall, adhesive lined, 150m
EPS-300-9/3-PO-X-BK 340-09030
Compare
Add to watchlist
150 metre
Black (BK) EPS-300-9/3-PO-X-BK 340-09030
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Compare
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
T50ML-PA66-NA 113-05419
Compare
Add to watchlist
100 pcs.
Natural (NA) T50ML-PA66-NA 113-05419
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
T50SOSFT8E-PA46-GY 157-00115
Compare
Add to watchlist
1000 pcs.
Grey (GY) T50SOSFT8E-PA46-GY 157-00115
Fixing tie for hole (oval), ⌀2.0-50.0mm, black, 100pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (oval), ⌀2.0-50.0mm, black, 100pcs.
T50ROSFTOVAL25A-PA66HIRHSUV-BK 157-00431
Compare
Add to watchlist
100 pcs.
Black (BK) T50ROSFTOVAL25A-PA66HIRHSUV-BK 157-00431
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 50pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Compare
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 50pcs.
SRT34011-TPU-BK 115-11349
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) SRT34011-TPU-BK 115-11349
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 10pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Compare
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 10pcs.
SRT58028-TPU-BK 115-28589
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
10 pcs.
Black (BK) SRT58028-TPU-BK 115-28589
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Compare
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CC11-PA66HIRHSUV-BK 151-01144
Compare
Add to watchlist
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
2-piece Fixing tie for round holes made from PA46.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
T50RFT8GSD-PA46-GY 156-00235
Compare
Add to watchlist
1000 pcs.
Grey (GY) T50RFT8GSD-PA46-GY 156-00235
Fixing tie for hole (round), inside serrated, ⌀5.0-81.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-81.0mm, black, 500pcs.
T80ISFT6.5-PA66HS-BK 156-01699
Compare
Add to watchlist
500 pcs.
Black (BK) T80ISFT6.5-PA66HS-BK 156-01699
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Facebook  YouTube  Link Corporate Blog  Instagram  X  LinkedIn 
Contact General Terms of Sale and Supply Imprint Guidelines and commitments Privacy Policy Newsletter
Update: 23/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Update: 23/08/2025 | Privacy Settings
Contact