Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
21/12/2025

Results for "hard line high frequency" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

5,276 개의 제품을
모두 초기화
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip.
Compare
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Compare
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079
Protection cap for connectors, black, 600pcs.
Connector Clips are available for many different connector types and fixing varieties.
Compare
Protection cap for connectors, black, 600pcs.
9632910680-PA6HIR-BK 151-00339
Compare
Add to watchlist
600 pcs.
Black (BK) 9632910680-PA6HIR-BK 151-00339
Connector clip, black, 6000pcs.
Connector Clips are available for many different connector types and fixing varieties.
Compare
Connector clip, black, 6000pcs.
CCFT6LGTS12.5-PA66HIRHS-BK 151-03104
Compare
Add to watchlist
6000 pcs.
Black (BK) CCFT6LGTS12.5-PA66HIRHS-BK 151-03104
Connector clip for hole (oval), black, 1000pcs.
Compare
Connector clip for hole (oval), black, 1000pcs.
CCOVAL-PA66HIRHS-BK 151-02533
Compare
Add to watchlist
1000 pcs.
Black (BK) CCOVAL-PA66HIRHS-BK 151-02533
Connector clip, black, 6000pcs.
Compare
Connector clip, black, 6000pcs.
CC11SFT712-PA66HIRHS-BK 151-03002
Compare
Add to watchlist
6000 pcs.
Black (BK) CC11SFT712-PA66HIRHS-BK 151-03002
Connector clip, grey/black, 4000pcs.
Integrated dual seal meets IP65 for protection against water, dust, chemicals, air and sound.
Compare
Connector clip, grey/black, 4000pcs.
SRAH6.5D1.4TCC-PA66HIRHS/TPE-BK/GY 151-02080
Compare
Add to watchlist
4000 pcs.
Grey (GY), Black (BK) SRAH6.5D1.4TCC-PA66HIRHS/TPE-BK/GY 151-02080
Connector clip for connector, black, 3000pcs.
Compare
Connector clip for connector, black, 3000pcs.
CC90BRKT-PA66HIRHSUV-BK 151-01249
Compare
Add to watchlist
3000 pcs.
Black (BK) CC90BRKT-PA66HIRHSUV-BK 151-01249
Connector clip, EWCAP-005-7, black, 2000pcs.
Compare
Connector clip, EWCAP-005-7, black, 2000pcs.
CCM10SO28R-PA66HIRHSUV-BK 151-02802
Compare
Add to watchlist
2000
Black (BK) CCM10SO28R-PA66HIRHSUV-BK 151-02802
Connector clip, black, 4000pcs.
Connector clip CCSBS5 for weld studs.
Compare
Connector clip, black, 4000pcs.
CCSBS5-PA66HIRHS-BK 151-01196
Compare
Add to watchlist
4000 pcs.
Black (BK) CCSBS5-PA66HIRHS-BK 151-01196
Connector clip, black, 4000Carton
For use with weld studs.
Compare
Connector clip, black, 4000Carton
SB5-6CC11-PA66HIRHSUV-BK 151-02886
Compare
Add to watchlist
4000 Carton
Black (BK) SB5-6CC11-PA66HIRHSUV-BK 151-02886
Connector clip, EWCAP-005-11, black, 1000pcs.
Compare
Connector clip, EWCAP-005-11, black, 1000pcs.
CC11VEC6-PA66HIRHS-BK 151-02568
Compare
Add to watchlist
1000 pcs.
Black (BK) CC11VEC6-PA66HIRHS-BK 151-02568
Protection cap for connectors, black, 550pcs.
Compare
Protection cap for connectors, black, 550pcs.
CP6FT6-PA6HIR-BK 151-00162
Compare
Add to watchlist
550 pcs.
Black (BK) CP6FT6-PA6HIR-BK 151-00162
Protection cap for connectors, black, 550pcs.
Compare
Protection cap for connectors, black, 550pcs.
CP3FT6-PA66HIRHS-BK 151-00163
Compare
Add to watchlist
550 pcs.
Black (BK) CP3FT6-PA66HIRHS-BK 151-00163
Connector clip for hole (oval), grey, 500pcs.
ConnectorClip for oval holes 7x12 mm, in line.
Compare
Connector clip for hole (oval), grey, 500pcs.
CCSFT7x12-PA66HIRHS-GY 151-00222
Compare
Add to watchlist
500 pcs.
Grey (GY) CCSFT7x12-PA66HIRHS-GY 151-00222
Connector clip for hole (oval), blue, 500pcs.
Compare
Connector clip for hole (oval), blue, 500pcs.
CCSFT7x12-PA66HIRHS-BU 151-00595
Compare
Add to watchlist
500 pcs.
Blue (BU) CCSFT7x12-PA66HIRHS-BU 151-00595
Connector clip for hole (oval), EWCAP-005-7, black, 10000pcs.
Connector clip with arrowhead mount.
Compare
Connector clip for hole (oval), EWCAP-005-7, black, 10000pcs.
CCIVSFT6.5x130-PA66HIRHSUV-BK 151-02076
Compare
Add to watchlist
10000
Black (BK) CCIVSFT6.5x130-PA66HIRHSUV-BK 151-02076
Connector clip for hole (oval), black, 500pcs.
Compare
Connector clip for hole (oval), black, 500pcs.
TCCSFT6.5X13PT0.6-2.0-MD-PA66HIRHS/EPDM-BK 151-01272
Compare
Add to watchlist
500 pcs.
Black (BK) TCCSFT6.5X13PT0.6-2.0-MD-PA66HIRHS/EPDM-BK 151-01272
Connector clip for hole (oval), black, 5000pcs.
Anti-rotational oval fir tree fastener forces bundle to travel in intended direction.
Compare
Connector clip for hole (oval), black, 5000pcs.
YCCSFT6.5X13PT0.6-2.0-MD-PA66HIRHS/EPDM-BK 151-01273
Compare
Add to watchlist
500 pcs.
Black (BK) YCCSFT6.5X13PT0.6-2.0-MD-PA66HIRHS/EPDM-BK 151-01273
Connector clip for hole (oval), black, 500pcs.
Compare
Connector clip for hole (oval), black, 500pcs.
CCSFT6.5X12.5-MD-PA66HIRHS-BK 151-01312
Compare
Add to watchlist
500 pcs.
Black (BK) CCSFT6.5X12.5-MD-PA66HIRHS-BK 151-01312
Connector clip for hole (oval), black, 1000pcs.
Compare
Connector clip for hole (oval), black, 1000pcs.
CCIVSFT65130-MD-PA66HIR-BK 151-01676
Compare
Add to watchlist
500 pcs.
Black (BK) CCIVSFT65130-MD-PA66HIR-BK 151-01676
Connector clip for hole (round), natural, 1000pcs.
Compare
Connector clip for hole (round), natural, 1000pcs.
BCBRKT55M-PA66HIRHS-NA 151-01404
Compare
Add to watchlist
1000 pcs.
Natural (NA) BCBRKT55M-PA66HIRHS-NA 151-01404
Bundling clip for stud, SO=15.8mm, beige, 5000pcs.
Bundling clips provide a simple method of securing wire and cable bundles.
Compare
Bundling clip for stud, SO=15.8mm, beige, 5000pcs.
BC43OS16PH6.35-PA66HIRHS-BGE 151-03021
Compare
Add to watchlist
5000 pcs.
Beige (BGE) BC43OS16PH6.35-PA66HIRHS-BGE 151-03021
Bundling clip for stud, SO=15.8mm, green, 2500pcs.
Bundling clips provide a simple method of securing wire and cable bundles.
Compare
Bundling clip for stud, SO=15.8mm, green, 2500pcs.
BC43OS16PH6.35-PA66HIRHS-GN 151-03022
Compare
Add to watchlist
2500 pcs.
Light Green (LTGN) BC43OS16PH6.35-PA66HIRHS-GN 151-03022
Bundling clip, L=39.0mm, black, 500pcs.
Compare
Bundling clip, L=39.0mm, black, 500pcs.
ATSBCSFT6.5-MD-PA66HIRHS-BK 102-69065
Compare
Add to watchlist
500 pcs.
Black (BK) ATSBCSFT6.5-MD-PA66HIRHS-BK 102-69065
Bundling clip for hole (oval), L=58.0mm, natural, 5000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Bundling clip for hole (oval), L=58.0mm, natural, 5000pcs.
BCFTOVAL-PA66HIRHS-NA 151-02962
Compare
Add to watchlist
5000 pcs.
Natural (NA) BCFTOVAL-PA66HIRHS-NA 151-02962
Bundling clip for hole (oval), L=50.0mm, SO=25.0mm, black, 500pcs.
Compare
Bundling clip for hole (oval), L=50.0mm, SO=25.0mm, black, 500pcs.
SOC25FT712-PA66HIRHS-BK 151-01213
Compare
Add to watchlist
500 pcs.
Black (BK) SOC25FT712-PA66HIRHS-BK 151-01213
Bundling clip for hole (oval), L=109.3mm, black, 200pcs.
Compare
Bundling clip for hole (oval), L=109.3mm, black, 200pcs.
BC70LFT712-PA66HIRHS-BK 151-01217
Compare
Add to watchlist
200 pcs.
Black (BK) BC70LFT712-PA66HIRHS-BK 151-01217
Bundling clip for hole (oval), L=38.7mm, natural, 10000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Bundling clip for hole (oval), L=38.7mm, natural, 10000pcs.
BCFTOVAL2-PA66HIRHS-NA 151-03493
Compare
Add to watchlist
10000 pcs.
Natural (NA) BCFTOVAL2-PA66HIRHS-NA 151-03493
Bundling clip for hole (oval), L=43.6mm, SO=23.5mm, black, 500pcs.
Compare
Bundling clip for hole (oval), L=43.6mm, SO=23.5mm, black, 500pcs.
SOC23.5FT6.2x12.2-PA66HIRHS-BK 151-01534
Compare
Add to watchlist
500 pcs.
Black (BK) SOC23.5FT6.2x12.2-PA66HIRHS-BK 151-01534
Bundling clip for hole (oval), L=40.0mm, black, 5000pcs.
Bundling Clip with FirTree for oval holes (6.2 x 12.2 mm).
Compare
Bundling clip for hole (oval), L=40.0mm, black, 5000pcs.
BC40FT62X122S-PA66HIRHS-BK 151-03395
Compare
Add to watchlist
5000 pcs.
Black (BK) BC40FT62X122S-PA66HIRHS-BK 151-03395
Bundling clip for hole (oval), L=16.0mm, black, 5000pcs.
Bundling Clip with one wing for oval holes (6.2 x 12.2 mm).
Compare
Bundling clip for hole (oval), L=16.0mm, black, 5000pcs.
BCOWFT6.2x12.2-PA66HIRHS-BK 151-03427
Compare
Add to watchlist
5000 pcs.
Black (BK) BCOWFT6.2x12.2-PA66HIRHS-BK 151-03427
Bundling clip for hole (oval), L=50.0mm, SO=11.5mm, black, 2500pcs.
Bundling Clip for oval holes (6.2 x 12.2 mm).
Compare
Bundling clip for hole (oval), L=50.0mm, SO=11.5mm, black, 2500pcs.
SOC11.5FT6.2x12.2-PA66HIRHS-BK 151-03429
Compare
Add to watchlist
2500 pcs.
Black (BK) SOC11.5FT6.2x12.2-PA66HIRHS-BK 151-03429
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
TC5FT6S-PA66HIRHS-BK 151-01280
Compare
Add to watchlist
1000 pcs.
Black (BK) TC5FT6S-PA66HIRHS-BK 151-01280
Bundling clip for hole (round), L=56.0mm, SO=32.5mm, black, 1500pcs.
Standoff bundling clip design provides low insertion and high extraction force, for simple, secure performance.
Compare
Bundling clip for hole (round), L=56.0mm, SO=32.5mm, black, 1500pcs.
SOCHFT6-PA66HIRHSUV-BK 151-00623
Compare
Add to watchlist
1500 pcs.
Black (BK) SOCHFT6-PA66HIRHSUV-BK 151-00623
Bundling clip for hole (round), L=58.0mm, SO=43.35mm, natural, 3000pcs.
Tape clips are designed to provide simple and easy methods of securing cable bundles, hoses, or pipes.
Compare
Bundling clip for hole (round), L=58.0mm, SO=43.35mm, natural, 3000pcs.
SOC10FT6LG-PA66HIRHS-NA 151-00903
Compare
Add to watchlist
3000 pcs.
Natural (NA) SOC10FT6LG-PA66HIRHS-NA 151-00903
Bundling clip for hole (round), L=35.5mm, SO=20.3mm, natural, 4000pcs.
The bundle fastens to the tape bar using tape or cable ties.
Compare
Bundling clip for hole (round), L=35.5mm, SO=20.3mm, natural, 4000pcs.
SOC9FT6-PA66HIRHS-NA 151-01153
Compare
Add to watchlist
4000 pcs.
Natural (NA) SOC9FT6-PA66HIRHS-NA 151-01153
Bundling clip for hole (oval), L=37.0mm, black, 5000pcs.
Bundling Clip for round holes with fir tree.
Compare
Bundling clip for hole (oval), L=37.0mm, black, 5000pcs.
BC37FT6.5-PA66HIRHS-BK 151-03377
Compare
Add to watchlist
5000 pcs.
Black (BK) BC37FT6.5-PA66HIRHS-BK 151-03377
Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 100pcs.
The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 100pcs.
CTT60R-PA66HIRHSUV-BK 112-52108
Compare
Add to watchlist
100
Black (BK) CTT60R-PA66HIRHSUV-BK 112-52108
Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 1000pcs.
The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 1000pcs.
CTT60R-PA66HIRHSUV-BK 112-52109
Compare
Add to watchlist
1000
Black (BK) CTT60R-PA66HIRHSUV-BK 112-52109
Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 1000pcs.
The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Cable tie inside serrated, 203.2x4.7mm, ⌀1.5-45.0mm, black, 1000pcs.
CTT60R-PA66HIRHSUV-BK 112-52111
Compare
Add to watchlist
1000
Black (BK) CTT60R-PA66HIRHSUV-BK 112-52111
Cable clip for hole (oval), T=0.7-2.0mm, ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
Automatic Harness Clip AHC2BH open.
Compare
Cable clip for hole (oval), T=0.7-2.0mm, ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
AHC2BH-PA66HIRHS-BK 151-02517
Compare
Add to watchlist
2000 pcs.
Black (BK) AHC2BH-PA66HIRHS-BK 151-02517
Cable clip for hole (oval), T=0,7-2,0mm, ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
Automatic Harness Clip AHC2BH open.
Compare
Cable clip for hole (oval), T=0,7-2,0mm, ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
AHC2BH-PA66HIRHS-BK 151-02882
Compare
Add to watchlist
900 pcs.
Black (BK) AHC2BH-PA66HIRHS-BK 151-02882
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
AHC3DH-PA66HIRHS-BK 151-00181
Compare
Add to watchlist
300 pcs.
Black (BK) AHC3DH-PA66HIRHS-BK 151-00181
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
Compare
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
HC140SFT62x122-PA6HIR-BK 151-00423
Compare
Add to watchlist
1200 pcs.
Black (BK) HC140SFT62x122-PA6HIR-BK 151-00423
Cable clip for hole (round), ⌀7.8 - 8.2 mm
Compare
Cable clip for hole (round), ⌀7.8 - 8.2 mm
CTCLPROFILE-PA66HIRHS-BK 151-00026
Compare
Add to watchlist
500 pcs.
Black (BK) CTCLPROFILE-PA66HIRHS-BK 151-00026
Cable clip for hole (round), ⌀6.3 - 6.7 mm
Fixing element with short arrow head for round holes and for pipes and harnesses 1.0 - 3.0 mm.
Compare
Cable clip for hole (round), ⌀6.3 - 6.7 mm
KSFT6.5OC1-3-PA66HIRHS-BK 151-01843
Compare
Add to watchlist
2500 pcs.
Black (BK) KSFT6.5OC1-3-PA66HIRHS-BK 151-01843
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7 for simple and secure installation of corrugated tubing.
Compare
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7-PA66HIRHSUV-BK 151-14303
Compare
Add to watchlist
1000 pcs.
Black (BK) PC15FT7-PA66HIRHSUV-BK 151-14303
Cable clip for hole (round), T=0.6 - 8.25mm, ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=15.0mm, Dmax=19.0mm
Locking clamp creates a full and secure lock completely around a wire bundle ranging from 5-25 mm.
Compare
Cable clip for hole (round), T=0.6 - 8.25mm, ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=15.0mm, Dmax=19.0mm
LOC15-19FT6LG2-PA66HIRHSUV-BK 151-01023
Compare
Add to watchlist
2000 pcs.
Black (BK) LOC15-19FT6LG2-PA66HIRHSUV-BK 151-01023
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=5.5mm, Dmax=6.8mm, nom⌀=6.0 mm
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=5.5mm, Dmax=6.8mm, nom⌀=6.0 mm
MOC6FT6.5-PA66HIRHSUV-BK 151-01713
Compare
Add to watchlist
5000
Black (BK) MOC6FT6.5-PA66HIRHSUV-BK 151-01713
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=8.0mm, Dmax=10.0mm, nom⌀=9.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=8.0mm, Dmax=10.0mm, nom⌀=9.0 mm
MOC9FT6.5-PA66HIRHSUV-BK 151-01740
Compare
Add to watchlist
5000
Black (BK) MOC9FT6.5-PA66HIRHSUV-BK 151-01740
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=9.5mm, Dmax=11.5mm, nom⌀=10.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=9.5mm, Dmax=11.5mm, nom⌀=10.0 mm
MOC10FT6.5-PA66HIRHSUV-BK 151-01749
Compare
Add to watchlist
7500
Black (BK) MOC10FT6.5-PA66HIRHSUV-BK 151-01749
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=20.0mm, Dmax=25.0mm, nom⌀=22.0 mm
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=20.0mm, Dmax=25.0mm, nom⌀=22.0 mm
MOC22FT6.5-PA66HIRHSUV-BK 151-01798
Compare
Add to watchlist
2000 pcs.
Black (BK) MOC22FT6.5-PA66HIRHSUV-BK 151-01798
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Compare
Add to watchlist
1000 pcs.
Black (BK) MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
The 360 degree enclosure ensures the entire bundle is secure when being routed by the LOC clip.
Compare
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03863
Compare
Add to watchlist
1000
Black (BK) LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03863
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
The 360 degree enclosure ensures the entire bundle is secure when being routed by the LOC clip.
Compare
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03899
Compare
Add to watchlist
100
Black (BK) LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03899
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC-Series, Fir tree mount for oval holes (9 x 12mm).
Compare
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03864
Compare
Add to watchlist
1000
Black (BK) LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03864
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC-Series, Fir tree mount for oval holes (9 x 12mm).
Compare
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03902
Compare
Add to watchlist
100
Black (BK) LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03902
Corrugated tube clip for hole (round), nom⌀15.0mm, black, 5000pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round), nom⌀15.0mm, black, 5000pcs.
CTCFT6-PA66HIRHS-BK 151-02856
Compare
Add to watchlist
5000 pcs.
Black (BK) CTCFT6-PA66HIRHS-BK 151-02856
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 6000pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 6000pcs.
CTCL4.5FT6LG-PA66HIRHS-BK 151-02274
Compare
Add to watchlist
6000 pcs.
Black (BK) CTCL4.5FT6LG-PA66HIRHS-BK 151-02274
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG Clamps.
Compare
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Compare
Add to watchlist
500 pcs.
Blue (BU) CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
CTC8FT6-PA66HIRHS-BK 151-01543
Compare
Add to watchlist
500 pcs.
Black (BK) CTC8FT6-PA66HIRHS-BK 151-01543
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 5.5mm, grey, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 5.5mm, grey, 5000pcs.
FT6.5 Plug-PA66HIRHS-GY 151-02958
Compare
Add to watchlist
5000 pcs.
Grey (GY) FT6.5 Plug-PA66HIRHS-GY 151-02958
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.
FT6.5Plug-PA66HIRHSUV-BK 151-01317
Compare
Add to watchlist
5000 pcs.
Black (BK) FT6.5Plug-PA66HIRHSUV-BK 151-01317
Blind plug, ⌀6.1 - 6.7 mm, T=0.6 - 12.5mm, black, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.7 mm, T=0.6 - 12.5mm, black, 5000pcs.
FT6.5SDLGPLUG-PA66HIRHSUV-BK 151-03252
Compare
Add to watchlist
5000 pcs.
Black (BK) FT6.5SDLGPLUG-PA66HIRHSUV-BK 151-03252
Cable clip for stud
Compare
Cable clip for stud
ICD5X10-PA66HIRHS-BK 151-00361
Compare
Add to watchlist
2000 pcs.
Black (BK) ICD5X10-PA66HIRHS-BK 151-00361
Cable clip for stud
Compare
Cable clip for stud
IC5X6-PA66HIRHS-BK 151-00363
Compare
Add to watchlist
2500 pcs.
Black (BK) IC5X6-PA66HIRHS-BK 151-00363
Cable clip for stud
Pipe clip secures routing to panel using a stud mount suited for a 5 or 6mm stud or bolt.
Compare
Cable clip for stud
PC5SM6-PA66HIRHSUV-BK 151-03360
Compare
Add to watchlist
500 pcs.
Black (BK) PC5SM6-PA66HIRHSUV-BK 151-03360
Cable clip for adhesive use, ⌀3.3 mm
ASI Clip Self Adhesive / Screw Clip
Compare
Cable clip for adhesive use, ⌀3.3 mm
ASI-Clip-PA66HIR-NA 150-11294
Compare
Add to watchlist
500 pcs.
Natural (NA) ASI-Clip-PA66HIR-NA 150-11294
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.
H13P-PA66-BK 211-60138
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H13P-PA66-BK 211-60138
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.
H14P-PA66-BK 211-60148
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H14P-PA66-BK 211-60148
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
H1P-PA66-BK 211-60011
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H1P-PA66-BK 211-60011
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, red, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, red, 1000pcs.
H2P-PA66-RD 211-60022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Red (RD) H2P-PA66-RD 211-60022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, blue, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, blue, 1000pcs.
H2P-PA66-BU 211-60026
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Blue (BU) H2P-PA66-BU 211-60026
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66-BK 211-60012
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H2P-PA66-BK 211-60012
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
H2P-PA66HS-BK 211-60030
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H2P-PA66HS-BK 211-60030
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.
H3P-PA66-BK 211-60041
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H3P-PA66-BK 211-60041
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66-BK 211-60013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H3P-PA66-BK 211-60013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
H4P-PA66HS-BK 211-60064
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H4P-PA66HS-BK 211-60064
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
H4P-PA66-BK 211-60051
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H4P-PA66-BK 211-60051
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66-BK 211-60014
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H4P-PA66-BK 211-60014
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 1000pcs.
H5P-PA66-BK 211-60057
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H5P-PA66-BK 211-60057
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66-BK 211-60015
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H5P-PA66-BK 211-60015
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
H6P-PA66-BK 211-60060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H6P-PA66-BK 211-60060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66-BK 211-60016
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H6P-PA66-BK 211-60016
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 100pcs.
H6P-PA66-NA 211-00268
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) H6P-PA66-NA 211-00268
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
H6P-PA66HS-BK 211-60055
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H6P-PA66HS-BK 211-60055
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
H7P-PA66-BK 211-60077
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H7P-PA66-BK 211-60077
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
H7P-PA66-BK 211-60017
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H7P-PA66-BK 211-60017
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
H7P-PA66HS-BK 211-60056
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H7P-PA66HS-BK 211-60056
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
H7P-PA66V0-BK 211-00215
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H7P-PA66V0-BK 211-00215
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 100pcs.
H8P-PA66-NA 211-00270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) H8P-PA66-NA 211-00270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.
H8P-PA66HS-BK 211-60062
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H8P-PA66HS-BK 211-60062
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
H9P-PA66-BK 211-60097
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H9P-PA66-BK 211-60097
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
H9P-PA66HS-BK 211-60063
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H9P-PA66HS-BK 211-60063
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=17.4mm, Dmax=20.0mm, ⌀4.0 mm, black, 200pcs.
Compare
P-clamp closed, Dmin=17.4mm, Dmax=20.0mm, ⌀4.0 mm, black, 200pcs.
NX11-PA66-BK 221-10110
Compare
Add to watchlist
200 pcs.
Black (BK) NX11-PA66-BK 221-10110
P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.
Compare
P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.
NX14-PA66-BK 221-10140
Compare
Add to watchlist
100 pcs.
Black (BK) NX14-PA66-BK 221-10140
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, natural, 100pcs.
AB10N-PA66-NA 211-00175
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB10N-PA66-NA 211-00175
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, black, 100pcs.
AB10N-PA66W-BK 211-00176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB10N-PA66W-BK 211-00176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, natural, 100pcs.
AB11N-PA66-NA 211-00177
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB11N-PA66-NA 211-00177
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "hard line high frequency" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

YouTube  LinkedIn  Link Corporate Blog 
문의하기 법적고지 저작권고지 지침 및 책무 개인정보 보호 정책 뉴스레터 사이트맵
업데이트: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | 업데이트: 14/12/2025 | 개인 정보 설정
문의