28/07/2026

Results for "hard line high frequency" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

5,261 개의 제품을
모두 초기화
Fixing tie with pipe/tube holder, ⌀9.5-11.5mm, black, 1000pcs.
Independent rotation allows for adjustable routing orientation.
Compare
T50SMVCMOC10M180-PA66HIRHSUV-BK 156-01787
Compare
Independent rotation allows for adjustable routing orientation.
Compare
Compare
1000
Black (BK) T50SMVCMOC10M180-PA66HIRHSUV-BK 156-01787
Fixing tie with pipe/tube holder, ⌀13.0-15.8mm, black, 2000pcs.
Independent rotation allows for adjustable routing orientation.
Compare
T50SMVCMOC14M180-PA66HIRHSUV-BK 156-01789
Compare
Independent rotation allows for adjustable routing orientation.
Compare
Compare
2000 pcs.
Black (BK) T50SMVCMOC14M180-PA66HIRHSUV-BK 156-01789
Fixing tie with pipe/tube holder, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCTCL14B, simple and safe guidance of corrugated tubes, cable tie enables parallel guidance.
Compare
T50ROSCTCL14A-PA66HS/PA66HIRHS-BK 156-03353
Compare
T50ROSCTCL14B, simple and safe guidance of corrugated tubes, cable tie enables parallel guidance.
Compare
Compare
500 pcs.
Black (BK) T50ROSCTCL14A-PA66HS/PA66HIRHS-BK 156-03353
Fixing tie for stud, inside serrated, ⌀2.0-31.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
T50SSBS5-PA66HS/PA66HIRHS-BK 156-00631
Compare
Cable ties with various weld stud fixing methods.
Compare
Compare
500 pcs.
Black (BK) T50SSBS5-PA66HS/PA66HIRHS-BK 156-00631
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
T50SOSSBS5-PA66HS/PA66HIRHS-BK 156-03360
Compare
Cable ties with various weld stud fixing methods.
Compare
Compare
500 pcs.
Black (BK) T50SOSSBS5-PA66HS/PA66HIRHS-BK 156-03360
Fixing tie for stud, inside serrated, ⌀1.5-80.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
T80ISBS5-PA66HS/PA66HIRHS-BK 156-01363
Compare
Cable ties with various weld stud fixing methods.
Compare
Compare
500 pcs.
Black (BK) T80ISBS5-PA66HS/PA66HIRHS-BK 156-01363
Fixing tie for stud, inside serrated, ⌀1.0-31.0mm, black, 500pcs.
2-piece fixing tie for stud fixation 5mm, with disc.
Compare
T30RSBH5SD-PA66HS/PA66HIRHS-BK 156-00976
Compare
2-piece fixing tie for stud fixation 5mm, with disc.
Compare
Compare
500 pcs.
Black (BK) T30RSBH5SD-PA66HS/PA66HIRHS-BK 156-00976
Fixing tie for stud, outside serrated, ⌀3.0-45.0mm, black, 500pcs.
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
T50ROSGBS8CA-PA66HS/PA66HIRHS-BK 156-00768
Compare
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
Compare
500 pcs.
Black (BK) T50ROSGBS8CA-PA66HS/PA66HIRHS-BK 156-00768
Fixing tie for stud, outside serrated, ⌀3.0-45.0mm, black, 500pcs.
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
T50ROSGBS8CB-PA66HS/PA66HIRHS-BK 156-00769
Compare
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
Compare
500 pcs.
Black (BK) T50ROSGBS8CB-PA66HS/PA66HIRHS-BK 156-00769
Fixing tie for stud, inside serrated, ⌀45.0mm, black, 500pcs.
Compare
T50RSBH5-10-PA66HS/PA66HIRHS-BK 156-00691
Compare
Compare
Compare
500 pcs.
Black (BK) T50RSBH5-10-PA66HS/PA66HIRHS-BK 156-00691
Fixing tie for stud, ⌀85.0mm, black, 250pcs.
Compare
T80IDSBS5-PA66HS/PA66HIRHS-BK 156-03363
Compare
Compare
Compare
250 pcs.
Black (BK) T80IDSBS5-PA66HS/PA66HIRHS-BK 156-03363
Fixing tie for stud, ⌀1.0-45.0mm, black, 500pcs.
Compare
T50RSBH6SD-PA66HS/PA66HIRHS-BK 156-02978
Compare
Compare
Compare
500 pcs.
Black (BK) T50RSBH6SD-PA66HS/PA66HIRHS-BK 156-02978
Fixing tie for stud, black, 500pcs.
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
T50RSBS-M8-PA66HS/PA66HIRHS-BK 156-01534
Compare
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
Compare
500 pcs.
Black (BK) T50RSBS-M8-PA66HS/PA66HIRHS-BK 156-01534
Fixing tie for stud, ⌀5.0-55.0mm, black, 200pcs.
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
X120SDSBS5-6-PA66HS/PA66HIRHS-BK 156-03123
Compare
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
Compare
200 pcs.
Black (BK) X120SDSBS5-6-PA66HS/PA66HIRHS-BK 156-03123
Fixing tie, inside serrated, natural/black, 500pcs.
T50RCOUPLER for parallel routing.
Compare
CSCT50Rx2-PA46/PA66HIRHS-NA/BK 156-04128
Compare
T50RCOUPLER for parallel routing.
Compare
Compare
500 pcs.
Natural (NA), Black (BK) CSCT50Rx2-PA46/PA66HIRHS-NA/BK 156-04128
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, grey, 100pcs.
Compare
T120RHDM8-PA46-GY 156-01128
Compare
Compare
Compare
100 pcs.
Grey (GY) T120RHDM8-PA46-GY 156-01128
Fixing tie for screw fixation, inside serrated, ⌀15.0-50mm, grey, 100pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Compare
T50RHDM6-PA46-GY 156-00919
Compare
These HDM (Heavy duty mount) are suitable for assembling on screws.
Compare
Compare
100 pcs.
Grey (GY) T50RHDM6-PA46-GY 156-00919
Fixing tie for screw fixation, inside serrated, ⌀15.0-50.0mm, grey, 500pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Compare
T50RHDM8-PA46-GY 156-01126
Compare
These HDM (Heavy duty mount) are suitable for assembling on screws.
Compare
Compare
500 pcs.
Grey (GY) T50RHDM8-PA46-GY 156-01126
Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, natural/black, 500pcs.
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
T30REC4A-PA66-NA/BK 156-00490
Compare
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
Compare
500 pcs.
Natural (NA), Black (BK) T30REC4A-PA66-NA/BK 156-00490
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, grey, 500pcs.
T50ROSEC23 - the cable bundle runs parallel with the edge.
Compare
T50REC5B-PA46-GY 156-03361
Compare
T50ROSEC23 - the cable bundle runs parallel with the edge.
Compare
Compare
500 pcs.
Grey (GY) T50REC5B-PA46-GY 156-03361
Fixing tie for edge, outside serrated, ⌀1.5-45.0mm, grey, 500pcs.
Compare
T50ROSEC20-PA46-GY 156-02748
Compare
Compare
Compare
500 pcs.
Grey (GY) T50ROSEC20-PA46-GY 156-02748
Fixing tie for edge, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Compare
T50ROSEC2.5A-REV-PA66HS/PA66HIRHS-BK 156-04131
Compare
The holding tab increases the tensile strength additionaly.
Compare
Compare
500 pcs.
Black (BK) T50ROSEC2.5A-REV-PA66HS/PA66HIRHS-BK 156-04131
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 500pcs.
Staggered fir tree branch design provides low insertion forces and high extraction forces.
Compare
T50RFT8GSD-PA66HS/PA66HIRHS-BK 156-01142
Compare
Staggered fir tree branch design provides low insertion forces and high extraction forces.
Compare
Compare
500 pcs.
Black (BK) T50RFT8GSD-PA66HS/PA66HIRHS-BK 156-01142
Fixing tie for hole (round), inside serrated, ⌀8.0-80mm, black, 100pcs.
For applications with pre-drilled holes from 9.0 mm, panel thicknesses up to 11.0 mm and a max. bundling diaemter of 80.0 mm.
Compare
T120IFT9-PA66HS/PA66HIRHS-BK 156-01252
Compare
For applications with pre-drilled holes from 9.0 mm, panel thicknesses up to 11.0 mm and a max. bundling diaemter of 80.0 mm.
Compare
Compare
100 pcs.
Black (BK) T120IFT9-PA66HS/PA66HIRHS-BK 156-01252
Fixing tie for hole (round), inside serrated, ⌀8.0-80.0mm, black, 250pcs.
For applications with pre-drilled holes from 9.0 mm, panel thicknesses up to 11.0 mm and a max. bundling diaemter of 80.0 mm.
Compare
T120IFT9-PA66HS/PA66HIRHS-BK 156-01399
Compare
For applications with pre-drilled holes from 9.0 mm, panel thicknesses up to 11.0 mm and a max. bundling diaemter of 80.0 mm.
Compare
Compare
250 pcs.
Black (BK) T120IFT9-PA66HS/PA66HIRHS-BK 156-01399
Fixing tie for hole (round), inside serrated, ⌀5.0-55.0mm, black, 50pcs.
These fir tree fixings can also be used in threaded, blind holes.
Compare
T120SFT9-PA66-BK 156-00735
Compare
These fir tree fixings can also be used in threaded, blind holes.
Compare
Compare
50 pcs.
Black (BK) T120SFT9-PA66-BK 156-00735
Fixing tie for hole (round), inside serrated, ⌀100.0mm, black, 100pcs.
These fir tree fixings can also be used in threaded, blind holes.
Compare
T150RFT9-PA66HS/PA66HIRHS-BK 156-00845
Compare
These fir tree fixings can also be used in threaded, blind holes.
Compare
Compare
100 pcs.
Black (BK) T150RFT9-PA66HS/PA66HIRHS-BK 156-00845
Fixing tie for hole (round), inside serrated, ⌀5-100.0mm, black, 100pcs.
These fir tree fixings can also be used in threaded, blind holes.
Compare
T150RFT9B-PA66HS/PA66HIRHS-BK 156-00985
Compare
These fir tree fixings can also be used in threaded, blind holes.
Compare
Compare
100 pcs.
Black (BK) T150RFT9B-PA66HS/PA66HIRHS-BK 156-00985
Fixing tie for hole (round), outside serrated, ⌀32.0mm, black, 200pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
T50SOSSFT6.5D16-PA66HS-BK 156-01673
Compare
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
Compare
200 pcs.
Black (BK) T50SOSSFT6.5D16-PA66HS-BK 156-01673
Fixing tie for hole (round), ⌀1.5-50.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
T50R-ATS-SFT712S2-PA66HS/PA66HIRHS-BK 156-02958
Compare
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
Compare
500 pcs.
Black (BK), Black (BK) T50R-ATS-SFT712S2-PA66HS/PA66HIRHS-BK 156-02958
Fixing tie for hole (round), inside serrated, ⌀10.0-100.0mm, black, 200pcs.
2-piece fixing tie for panel thickness 10, 12 or 15 mm.
Compare
X120RPF12T10.12or15-PA66HIRHS-BK 156-03098
Compare
2-piece fixing tie for panel thickness 10, 12 or 15 mm.
Compare
Compare
200 pcs.
Black (BK) X120RPF12T10.12or15-PA66HIRHS-BK 156-03098
Fixing tie for hole (round), inside serrated, ⌀10.0-105.0mm, grey, 200pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Compare
T120RDHDM8-PA46-GY 156-01099
Compare
DHDM (Double heavy duty mount) for parallel routing of bundles.
Compare
Compare
200 pcs.
Grey (GY) T120RDHDM8-PA46-GY 156-01099
Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.
Compare
ATSFT6LG-PA66HIRHS-BK 102-67062
Compare
Compare
Compare
2000 pcs.
Black (BK) ATSFT6LG-PA66HIRHS-BK 102-67062
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
CTM3-PA66-BK 151-30600
Compare
Compare
Compare
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Mount and tie combination makes it easy to service bundles in the field.
Compare
HDM312-PA66HIRHSUV-BK 151-00439
Compare
Mount and tie combination makes it easy to service bundles in the field.
Compare
Compare
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Compare
EC33-PA66HIRHS-BK 151-00192
Compare
Compare
Compare
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192
Fixing tie with pipe/tube holder, inside serrated, ⌀15.0-19.0mm, black, 1000pcs.
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292
Compare
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
Compare
2000 pcs.
Black (BK) T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292
Cable tie inside serrated detectable, 390.0x4.6mm, ⌀6.0-110.0mm, blue, 100pcs.
Compare
MCTPP50L-PPMD-BU 111-01667
Compare
Compare
Compare
100 pcs.
Blue (BU) MCTPP50L-PPMD-BU 111-01667
Cable tie inside serrated detectable, 203.2x4.6mm, ⌀6.0-50.0mm, blue, 100pcs.
Compare
MCTPP50R-PPMD-BU 111-01666
Compare
Compare
Compare
100 pcs.
Blue (BU) MCTPP50R-PPMD-BU 111-01666
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀16.0-100.0mm, blue, 100pcs.
Compare
MCTPP120R-PPMD-BU 111-01668
Compare
Compare
Compare
100 pcs.
Blue (BU) MCTPP120R-PPMD-BU 111-01668
Cable tie inside serrated detectable, 100.0x2.4mm, ⌀1.5-22.0mm, blue, 100pcs.
Compare
MCTPP18R-PPMD-BU 111-01664
Compare
Compare
Compare
100 pcs.
Blue (BU) MCTPP18R-PPMD-BU 111-01664
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.0 mm/6.35 mm (hexagonal), ⌀6.35 mm, #1/4" (M6) Screw, grey, 500pcs.
Separates bundles from wear and chafing, providing additional longevity.
Compare
S2CM25-PA66HIRHS-GY 151-29400
Compare
Separates bundles from wear and chafing, providing additional longevity.
Compare
Compare
500 pcs.
Grey (GY) S2CM25-PA66HIRHS-GY 151-29400
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S for M8 threaded studs.
Compare
SBR8S-PA46-GY 131-60058
Compare
SBR8S for M8 threaded studs.
Compare
Compare
500 pcs.
Grey (GY) SBR8S-PA46-GY 131-60058
Stainless steel cable tie, ball bearing lock, 521.0x7.9mm, ⌀17.0-152.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT20HS-SS304-ML 111-94208
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT20HS-SS304-ML 111-94208
Stainless steel cable tie, ball bearing lock, 685.0x7.9mm, ⌀17.0-203.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT27HS-SS304-ML 111-94278
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT27HS-SS304-ML 111-94278
Stainless steel cable tie, ball bearing lock, 685.0x4.6mm, ⌀17.0-203.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT27SS-SS304-ML 111-93278
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
100 pcs.
Metal (ML) MBT27SS-SS304-ML 111-93278
Stainless steel cable tie, ball bearing lock, 838.0x7.9mm, ⌀17.0-254.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT33HS-SS304-ML 111-94338
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT33HS-SS304-ML 111-94338
Stainless steel cable tie, ball bearing lock, 838.0x4.6mm, ⌀17.0-254.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT33SS-SS304-ML 111-93338
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
100 pcs.
Metal (ML) MBT33SS-SS304-ML 111-93338
Stainless steel cable tie, ball bearing lock, 362x4.6mm, ⌀12-102mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT14S-SS316-ML 111-01945
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
100 pcs.
Metal (ML) MBT14S-SS316-ML 111-01945
Stainless steel cable tie, ball bearing lock, 362.0x12.3mm, ⌀12.0-102.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT14XH-SS316L-ML 111-95149
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT14XH-SS316L-ML 111-95149
Stainless steel cable tie, ball bearing lock, 521.0x12.3mm, ⌀12.0-152.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT20XH-SS316L-ML 111-95209
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT20XH-SS316L-ML 111-95209
Stainless steel cable tie, ball bearing lock, 681.0x12.3mm, ⌀12.0-203.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT27XH-SS316L-ML 111-95279
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT27XH-SS316L-ML 111-95279
Stainless steel cable tie, ball bearing lock, 838.0x7.9mm, ⌀12.0-254.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT33H-SS316L-ML 111-94339
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT33H-SS316L-ML 111-94339
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Compare
KK2-PA6HIR-BK 234-10200
Compare
Klam-Klips KK1 - 4.
Compare
Compare
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Compare
KK4-PA6HIR-BK 234-10400
Compare
Klam-Klips KK1 - 4.
Compare
Compare
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H11P-PA66-NA 211-60119
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
1000 pcs.
Natural (NA) H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H13P-PA66-NA 211-60139
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
500 pcs.
Natural (NA) H13P-PA66-NA 211-60139
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H15P-PA66-NA 211-60159
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
500 pcs.
Natural (NA) H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
H2P-PA66HS-BK 211-60001
Compare
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
Compare
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
H4P-PA66HS-BK 211-60003
Compare
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
Compare
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H5P-PA66HS-BK 211-60004
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU11C-AL/CR-BK 211-15110
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU15C-AL/CR-BK 211-15150
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU20C-AL/CR-BK 211-15200
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU4-AL-NA 211-10040
Compare
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU5-AL-NA 211-10050
Compare
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU5C-AL/CR-BK 211-15050
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU6C-AL/CR-BK 211-15060
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU7C-AL/CR-BK 211-15070
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU9C-AL/CR-BK 211-15090
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Solar I-Beam Clips
Compare
IBBCLPSLR1-PA66HIRHSUV-BK 151-04320
Compare
Compare
Compare
250 pcs.
Black (BK) IBBCLPSLR1-PA66HIRHSUV-BK 151-04320
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCB180SM6SS-PA666V0/SS304-BK 151-02736
Compare
Compare
Compare
280 pcs.
Black (BK) RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
Compare
RCD15SM8SS-PA666V0/SS304-BK 151-03149
Compare
Compare
Compare
160
Black (BK) RCD15SM8SS-PA666V0/SS304-BK 151-03149
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 140pcs.
RCD180LM10.
Compare
RCD180LM10SS-PA666V0/SS304-BK 151-03007
Compare
RCD180LM10.
Compare
Compare
140
Black (BK) RCD180LM10SS-PA666V0/SS304-BK 151-03007
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCD180LM8SS-PA666V0/SS304-BK 151-02735
Compare
Compare
Compare
140 pcs.
Black (BK) RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 30°, black, 140pcs.
Compare
RCD30LM10SS-PA666V0/SS304-BK 151-03009
Compare
Compare
Compare
140
Black (BK) RCD30LM10SS-PA666V0/SS304-BK 151-03009
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Compare
RCD30LM8SS-PA666V0/SS304-BK 151-03145
Compare
Compare
Compare
140
Black (BK) RCD30LM8SS-PA666V0/SS304-BK 151-03145
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Compare
RCD30SM8SS-PA666V0/SS304-BK 151-03146
Compare
Compare
Compare
160
Black (BK) RCD30SM8SS-PA666V0/SS304-BK 151-03146
Connector clip for hole (round), black, 500pcs.
Connector Clips are available for many different connector types and fixing varieties.
Compare
FT6S-Y-CONN-TS-PA66HIRHS-BK 155-43702
Compare
Connector Clips are available for many different connector types and fixing varieties.
Compare
Compare
500 pcs.
Black (BK) FT6S-Y-CONN-TS-PA66HIRHS-BK 155-43702
Connector clip for hole (round), EWCAP-005-11, black, 500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
YCC-FT6-S-PA66HIRHS-BK 155-38102
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
500 pcs.
Black (BK) YCC-FT6-S-PA66HIRHS-BK 155-38102
Connector clip for hole (round), EWCAP-005-7, black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles
Compare
CCFT6LG-PA66HIRHS-BK 151-00785
Compare
Head design contains clamping rails to provide full circumferential compression around bundles
Compare
Compare
5000 pcs.
Black (BK) CCFT6LG-PA66HIRHS-BK 151-00785
Connector clip for hole (oval), EWCAP-005-11, natural, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
CCOVAL-PA66HIRHS-NA 151-01259
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
5000 pcs.
Natural (NA) CCOVAL-PA66HIRHS-NA 151-01259
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Compare
EC11-PA66HIRHS-BK 155-40602
Compare
Compare
Compare
1000 pcs.
Black (BK) EC11-PA66HIRHS-BK 155-40602
Ratchet O-Clamp
Compare
ROC18.5-22.5NXT -PA66HIRHSUV/SS-BK 151-04385
Compare
Compare
Compare
200 pcs.
Black (BK) ROC18.5-22.5NXT -PA66HIRHSUV/SS-BK 151-04385
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Compare
Halter SFT6.5-PA66HIRHS-BK 133-00067
Compare
Compare
Compare
1000 pcs.
Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067
Bundling clip, L=39.0mm, black, 500pcs.
Compare
ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Compare
Compare
Compare
500 pcs.
Black (BK) ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Compare
BC2212-PA66HIRHS-BK 151-00017
Compare
The slim line BC series is particularly compact and flexible.
Compare
Compare
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
SOC11FTOVAL-PA66HIRHS-NA 151-00932
Compare
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Compare
3000 pcs.
Natural (NA) SOC11FTOVAL-PA66HIRHS-NA 151-00932
Bundling clip for hole (round), L=55.0mm, black, 8000pcs.
Bundling Clip for round holes 6.5 mm.
Compare
TC2FT6LG-PA66HIRHS-BK 151-00827
Compare
Bundling Clip for round holes 6.5 mm.
Compare
Compare
8000 pcs.
Black (BK) TC2FT6LG-PA66HIRHS-BK 151-00827
Bundling clip for hole (round), L=55.0mm, natural, 8000pcs.
Bundling Clip for round holes 6.5 mm.
Compare
TC2FT6LG-PA66HIRHS-NA 151-00828
Compare
Bundling Clip for round holes 6.5 mm.
Compare
Compare
8000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00828
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
TC3FT6S-PA66HIRHS-BK 151-00028
Compare
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
Compare
1000 pcs.
Black (BK) TC3FT6S-PA66HIRHS-BK 151-00028
Bundling clip for hole (round), L=37.0mm, natural, 14000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
TC4FT6LG-PA66HIRHS-NA 151-00986
Compare
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
Compare
14000 pcs.
Natural (NA) TC4FT6LG-PA66HIRHS-NA 151-00986
Bundling clip for hole (round), L=27.3mm, black, 20000pcs.
Compare
BCOWFT6M-PA66HIRHS-BK 151-02226
Compare
Compare
Compare
20000 pcs.
Black (BK) BCOWFT6M-PA66HIRHS-BK 151-02226
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M
Compare
BCOWFT6M-PA66HIRHS-NA 151-02227
Compare
BCOWFT6M
Compare
Compare
20000 pcs.
Natural (NA) BCOWFT6M-PA66HIRHS-NA 151-02227
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T120I-PA66-NA 111-12219
Compare
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
100 pcs.
Natural (NA) T120I-PA66-NA 111-12219
Cable tie inside serrated, 301.63x7.6mm, ⌀4.8-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T120I-PA66W-BK 111-01968
Compare
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
100 pcs.
Black (BK) T120I-PA66W-BK 111-01968
Cable tie inside serrated, 387.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
Compare
T120R-PA66W-BK 111-00400
Compare
Compare
Compare
100 pcs.
Black (BK) T120R-PA66W-BK 111-00400
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18L-PA66W-BK 111-01973
Compare
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
100 pcs.
Black (BK) T18L-PA66W-BK 111-01973
Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35.0mm, grey, 100pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
T30R-PA46-GY 111-00968
Compare
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Compare
100 pcs.
Grey (GY) T30R-PA46-GY 111-00968
Cable tie inside serrated, 150x3.6mm, ⌀3.0-35.0mm, white, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T30R-PA66V0-WH 111-93019
Compare
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
100 pcs.
White (WH) T30R-PA66V0-WH 111-93019

Results for "hard line high frequency" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  South Korea

소셜 미디어

© HellermannTyton 2026 (v4.312.2)  |  업데이트: 26/07/2026  |  개인 정보 설정
문의