13/09/2026

Results for "hard line high frequency" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

5,257 개의 제품을
모두 초기화
Fixing tie for edge, inside serrated, ⌀1.0-20.0mm, black, 5000Set
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
T18REC21SET-PA66HS/PA66HIRHS-BK 156-00179
Compare
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
Compare
5000 Set
Black (BK) T18REC21SET-PA66HS/PA66HIRHS-BK 156-00179
Cable tie not serrated vibration absorbing, 38.0x11.7mm, black, 200pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable Tie Mounts KR8
Compare
KR8/C5-PA66W-BK 121-58560
Compare
Cable Tie Mounts KR8
Compare
Compare
200 pcs.
Black (BK) KR8/C5-PA66W-BK 121-58560
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie not serrated, 50.0mx8.0mm, natural
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
KR8/S1 Endless Cable Tie Strap System
Compare
KR8/S1-PA66-NA 121-98119
Compare
KR8/S1 Endless Cable Tie Strap System
Compare
Compare
50 reel
Natural (NA) KR8/S1-PA66-NA 121-98119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀3.0-35.0mm, blue, 100pcs.
Compare
MCTPP30R-PPMD-BU 111-01665
Compare
Compare
Compare
100 pcs.
Blue (BU) MCTPP30R-PPMD-BU 111-01665
Cable tie inside serrated detectable, 201x4.7mm, ⌀10.0-50mm, blue, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
MCTPP ties have a high chemical and temperature resistance.
Compare
MCTS200-PPMD-BU 111-01386
Compare
MCTPP ties have a high chemical and temperature resistance.
Compare
Compare
100 pcs.
Blue (BU) MCTS200-PPMD-BU 111-01386
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
SAM83-PA66HIRHS-GY 151-29600
Compare
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Compare
500 pcs.
Grey (GY) SAM83-PA66HIRHS-GY 151-29600
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
SAOM82-PA66HIRHSUV-BK 151-29701
Compare
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Compare
500 pcs.
Black (BK) SAOM82-PA66HIRHSUV-BK 151-29701
Fixing tie for hole (round), inside serrated, ⌀5.0-35.0mm, black, 500pcs.
2-Piece Fixing Tie for round holes with fir tree and disc.
Compare
T30RFT5-PA66HS/PA66HIRHS-BK 150-55850
Compare
2-Piece Fixing Tie for round holes with fir tree and disc.
Compare
Compare
500 pcs.
Black (BK) T30RFT5-PA66HS/PA66HIRHS-BK 150-55850
Fixing tie for hole (round), inside serrated, ⌀3.0-30.0mm, black, 500pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
T30RFT6-PA66HS/PA66HIRHS-BK 150-77950
Compare
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
Compare
500 pcs.
Black (BK) T30RFT6-PA66HS/PA66HIRHS-BK 150-77950
Fixing tie for hole (round), inside serrated, ⌀5.0-30.0mm, black, 500pcs.
Compare
T30RFT6LG-PA66HS/PA66HIRHS-BK 150-31090
Compare
Compare
Compare
500 pcs.
Black (BK) T30RFT6LG-PA66HS/PA66HIRHS-BK 150-31090
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Compare
CC11-PA66HIRHSUV-BK 151-01144
Compare
Oval fir tree ensures a tight connection without rotation.
Compare
Compare
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
CCOVAL3-PA66HIRHSUV-BK 151-01244
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
CCOVAL4-PA66HIRHSUV-BK 151-01246
Compare
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Compare
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Compare
EC43-PA66HIRHS-BK 151-00430
Compare
Compare
Compare
500 pcs.
Black (BK) EC43-PA66HIRHS-BK 151-00430
Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, black, 3000pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
SOC11FTOVAL-PA66HIRHSUV-BK 151-00992
Compare
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Compare
3000 pcs.
Black (BK) SOC11FTOVAL-PA66HIRHSUV-BK 151-00992
Bundling clip for hole (round), L=37.0mm, black, 14000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
TC4FT6LG-PA66HIRHS-BK 151-00942
Compare
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
Compare
14000 pcs.
Black (BK) TC4FT6LG-PA66HIRHS-BK 151-00942
Stainless steel cable tie, ball bearing lock, 362x4.6mm, ⌀12.0-102mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT14SS-SS304-ML 111-01939
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
100 pcs.
Metal (ML) MBT14SS-SS304-ML 111-01939
Stainless steel cable tie, ball bearing lock, 362x7.9mm, ⌀17.0-102mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT14H-SS316-ML 111-01948
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT14H-SS316-ML 111-01948
Stainless steel cable tie, ball bearing lock, 838.0x12.3mm, ⌀12.0-254.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT33XH-SS316L-ML 111-95339
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT33XH-SS316L-ML 111-95339
Stainless steel cable tie, ball bearing lock, 201x7.9mm, ⌀17.0-50mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT8H-SS316L-ML 111-94083
Compare
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
50 pcs.
Metal (ML) MBT8H-SS316L-ML 111-94083
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Compare
C1-PA6HIR-BK 201-10010
Compare
C3-N66-BK.
Compare
Compare
100 pcs.
Black (BK) C1-PA6HIR-BK 201-10010
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Compare
KK3-PA6HIR-BK 234-10300
Compare
Klam-Klips KK1 - 4.
Compare
Compare
500 pcs.
Black (BK) KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H14P-PA66-NA 211-60149
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
500 pcs.
Natural (NA) H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H16P-PA66-NA 211-60169
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
500 pcs.
Natural (NA) H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H18P-PA66-NA 211-60189
Compare
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
250 pcs.
Natural (NA) H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU10-AL-NA 211-10100
Compare
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU13C-AL/CR-BK 211-15130
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU14C-AL/CR-BK 211-15140
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU16C-AL/CR-BK 211-15160
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU18C-AL/CR-BK 211-15180
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU22C-AL/CR-BK 211-15220
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU24C-AL/CR-BK 211-15240
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU4C-AL/CR-BK 211-15040
Compare
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU7-AL-NA 211-10070
Compare
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
ALU6-AL-NA 211-10060
Compare
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
Compare
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T120I-PA66-BK 111-12210
Compare
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
100 pcs.
Black (BK) T120I-PA66-BK 111-12210
Cable tie inside serrated, 203.2x2.5mm, ⌀1.5-55.0mm, white, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T18L-PA66V0-WH 111-02043
Compare
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
1000 pcs.
White (WH) T18L-PA66V0-WH 111-02043
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
T18R-PA66W-BK 111-01914
Compare
Head design guarantees high tensile strength and a low insertion force.
Compare
Compare
100 pcs.
Black (BK) T18R-PA66W-BK 111-01914
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
T50L-PA66W-BK 111-01965
Compare
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Compare
100 pcs.
Black (BK) T50L-PA66W-BK 111-01965
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Compare
T50R-PA46-NA 111-00725
Compare
Compare
Compare
100 pcs.
Natural (NA) T50R-PA46-NA 111-00725
Cable tie inside serrated, 120x4.8mm, ⌀3.0-28.0mm, natural, 200pcs.
Compare
LK2-PA66-NA 111-60219
Compare
Compare
Compare
200 pcs.
Natural (NA) LK2-PA66-NA 111-60219
Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.
Compare
WSI-PA66HIRHSUV-BK 111-12301
Compare
Compare
Compare
300 pcs.
Black (BK) WSI-PA66HIRHSUV-BK 111-12301
Cable tie inside serrated, 230.0x12.7mm, ⌀9.5-57.1mm, black, 300pcs.
Compare
WSS-PA66HIRHSUV-BK 111-12300
Compare
Compare
Compare
300 pcs.
Black (BK) WSS-PA66HIRHSUV-BK 111-12300
Cable tie outside serrated, 100x2.5mm, ⌀1.6-20.0mm, natural, 1000pcs.
Cable Tie T18ROS.
Compare
T18ROS-PA66HS-NA 118-00035
Compare
Cable Tie T18ROS.
Compare
Compare
1000 pcs.
Natural (NA) T18ROS-PA66HS-NA 118-00035
Cable tie outside serrated, 100x2.5mm, ⌀1.6-20.0mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Compare
T18ROS-PA66W-BK 118-00125
Compare
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Compare
Compare
100 pcs.
Black (BK) T18ROS-PA66W-BK 118-00125
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, natural, 100pcs.
Cable Tie T50ROS.
Compare
T50ROS-PA66HS-NA 118-05059
Compare
Cable Tie T50ROS.
Compare
Compare
100 pcs.
Natural (NA) T50ROS-PA66HS-NA 118-05059
Cable tie outside serrated, 200x3.4mm, ⌀1.6-50.0mm, white, 100pcs.
T30LOS an outside serrated cable tie.
Compare
T30LOS-PA66V0-WH 118-00080
Compare
T30LOS an outside serrated cable tie.
Compare
Compare
100 pcs.
White (WH) T30LOS-PA66V0-WH 118-00080
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Compare
FBB185M-PA66HS-BK 150-29180
Compare
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Compare
Compare
500 pcs.
Black (BK) FBB185M-PA66HS-BK 150-29180
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
SBT120-M12-PA66HSUV-BK 157-00021
Compare
Compare
Compare
25 pcs.
Black (BK) SBT120-M12-PA66HSUV-BK 157-00021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Compare
T50SOSSBU-M10-PA66HSW-GY 157-00067
Compare
T50SOSSBU-M8/10 for bundles which run below the stud.
Compare
Compare
100 pcs.
Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067
Fixing tie for stud, ⌀1.0-35.0mm, black, 500pcs.
Compare
T50SSBS6OT-E-PA66HS-BK 157-00208
Compare
Compare
Compare
500 pcs.
Black (BK) T50SSBS6OT-E-PA66HS-BK 157-00208
Fixing tie for stud, ⌀5.0-50.0mm, brown, 2500pcs.
Compare
T80ROSLPSB5-6U-PA46-BN 157-00476
Compare
Compare
Compare
2500 pcs.
Brown (BN) T80ROSLPSB5-6U-PA46-BN 157-00476
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie T50SOSEC12 can be pushed easily on edges.
Compare
T50SOSEC12E-PA66HS-BK 126-00317
Compare
1-Piece Fixing Tie T50SOSEC12 can be pushed easily on edges.
Compare
Compare
500 pcs.
Black (BK) T50SOSEC12E-PA66HS-BK 126-00317
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, grey, 500pcs.
1-Piece Fixing Tie with EdgeClip for vertical cable routing over the edge.
Compare
T50SOSEC12E-PA46-GY 126-00253
Compare
1-Piece Fixing Tie with EdgeClip for vertical cable routing over the edge.
Compare
Compare
500 pcs.
Grey (GY) T50SOSEC12E-PA46-GY 126-00253
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 5000pcs.
1-Piece Fixing Tie T50SOSEC12 can be pushed easily on edges.
Compare
T50SOSEC12E-PA66W-BK 126-00374
Compare
1-Piece Fixing Tie T50SOSEC12 can be pushed easily on edges.
Compare
Compare
500 pcs.
Black (BK) T50SOSEC12E-PA66W-BK 126-00374
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, grey, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Compare
T50SOSEC13E-PA46-GY 126-00345
Compare
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Compare
Compare
500 pcs.
Grey (GY) T50SOSEC13E-PA46-GY 126-00345
Fixing tie for edge, outside serrated, ⌀35.0mm, black, 500pcs.
Compare
T50SOSEC12AI-E-PA66HS-BK 126-00257
Compare
Compare
Compare
500 pcs.
Black (BK) T50SOSEC12AI-E-PA66HS-BK 126-00257
Fixing tie for hole (round), outside serrated, ⌀1.5-35.0mm, black, 500pcs.
The disc at the head of the T50SOSSFT6.5E protects the bore against dirt and splashes.
Compare
T50SOSSFT6.5E-PA66HS-BK 126-00177
Compare
The disc at the head of the T50SOSSFT6.5E protects the bore against dirt and splashes.
Compare
Compare
500 pcs.
Black (BK) T50SOSSFT6.5E-PA66HS-BK 126-00177
Fixing tie for hole (round), inside serrated, ⌀1.5-34.0mm, black, 500pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Compare
T50SL7-PA66HIRHSUV-BK 126-00363
Compare
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Compare
Compare
500 pcs.
Black (BK) T50SL7-PA66HIRHSUV-BK 126-00363
Fixing tie for hole (round), ⌀1.5-35.0mm, natural, 4000pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Compare
T50SWPM4.7-PA66HIRHS-NA 126-00351
Compare
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Compare
Compare
4000 pcs.
Natural (NA) T50SWPM4.7-PA66HIRHS-NA 126-00351
Fixing tie for hole (round), ⌀34mm, black, 500pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Compare
T50SL5-MOD-PA66HIRHS-BK 126-00293
Compare
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Compare
Compare
500 pcs.
Black (BK) T50SL5-MOD-PA66HIRHS-BK 126-00293
Fixing tie for hole (round), inside serrated, ⌀1.5-44.0mm, black, 1000pcs.
The arrowhead design allows these fixing ties to be used in areas with limited space.
Compare
T50RSF(U)-PA66HIRHSUV-BK 126-01005
Compare
The arrowhead design allows these fixing ties to be used in areas with limited space.
Compare
Compare
1000 pcs.
Black (BK) T50RSF(U)-PA66HIRHSUV-BK 126-01005
Fixing tie for hole (round), ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO25A-PA66HIRHS-GY 157-00368
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
500
Grey (GY) T50ROSFT6SO25A-PA66HIRHS-GY 157-00368
Fixing tie for hole (round), ⌀1.6-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00330
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
500 pcs.
Grey (GY) T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00330
Fixing tie for hole (round), ⌀2.0-50.0mm, grey, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00366
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
3000
Grey (GY) T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00366
Fixing tie for hole (round), ⌀1.6-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00331
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
500 pcs.
Black (BK) T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00331
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFTM6SO12.5B-PA66HIRHSUV-BK 157-00508
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
3000 pcs.
Black (BK) T50ROSFTM6SO12.5B-PA66HIRHSUV-BK 157-00508
Fixing tie for hole (round), ⌀2.0-50.0mm, grey, 3000
T50ROSFT6SO12.5A and T50ROSFT6SO25A.
Compare
T50ROSFT6SO12.5B-PA66HIRHS-GY 157-00176
Compare
T50ROSFT6SO12.5A and T50ROSFT6SO25A.
Compare
Compare
3000
Grey (GY) T50ROSFT6SO12.5B-PA66HIRHS-GY 157-00176
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO12.5A and T50ROSFT6SO25A.
Compare
T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00132
Compare
T50ROSFT6SO12.5A and T50ROSFT6SO25A.
Compare
Compare
500 pcs.
Black (BK) T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00132
Fixing tie for hole (round), ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO25B-PA66HIRHSUV-GY 157-00175
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
500 pcs.
Grey (GY) T50ROSFT6SO25B-PA66HIRHSUV-GY 157-00175
Fixing tie for hole (round), ⌀1.6-50.0mm, black, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00514
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
3000 pcs.
Black (BK) T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00514
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
Compare
T50ROSFT5SO25A-PA66HIRHS-GY 157-00167
Compare
Compare
Compare
500 pcs.
Grey (GY) T50ROSFT5SO25A-PA66HIRHS-GY 157-00167
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00516
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
3000 pcs.
Black (BK) T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00516
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 2000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT625SO-PA66HIRHSUV-BK 157-00517
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
2000 pcs.
Black (BK) T50ROSFT625SO-PA66HIRHSUV-BK 157-00517
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 1000Bag
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
T50ROSFT612.5SOVC-PA66HIRHSUV-BK 157-00199
Compare
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Compare
1000 pcs.
Black (BK) T50ROSFT612.5SOVC-PA66HIRHSUV-BK 157-00199
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 3000pcs.
Offset cable tie routes and positions wire and cable bundles away from a mounting hole.
Compare
T50ROSFT6.35SO12.5B-PA66HIRHSUV-BK 157-00246
Compare
Offset cable tie routes and positions wire and cable bundles away from a mounting hole.
Compare
Compare
3000 pcs.
Black (BK) T50ROSFT6.35SO12.5B-PA66HIRHSUV-BK 157-00246
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.
Fir tree mounts are designed to provide low insertion force and high extraction force.
Compare
T50ROSM10SO12.5A-PA66HIRHSUV-BK 157-00503
Compare
Fir tree mounts are designed to provide low insertion force and high extraction force.
Compare
Compare
3000 pcs.
Black (BK) T50ROSM10SO12.5A-PA66HIRHSUV-BK 157-00503
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Compare
T50SOSFT6E1-PA66HIRHS-BK 157-00125
Compare
Compare
Compare
500 pcs.
Black (BK) T50SOSFT6E1-PA66HIRHS-BK 157-00125
Fixing tie for hole (round), ⌀1.0-35.0mm, black, 500pcs.
FT6LG a foot part for hole application which covers a high panel thickness of 0.6 - up to 8.3 mm.
Compare
T50SOSFT6LG-E2-PA66HIRHSUV-BK 157-00452
Compare
FT6LG a foot part for hole application which covers a high panel thickness of 0.6 - up to 8.3 mm.
Compare
Compare
500 pcs.
Black (BK) T50SOSFT6LG-E2-PA66HIRHSUV-BK 157-00452
Fixing tie for hole (round), ⌀1.0-35.0mm, black, 4000pcs.
Fir tree foot parts can be used for a variety of panel thicknesses.
Compare
T50SOSFT6.5LG-E4-PA66HIRHSUV-BK 157-00455
Compare
Fir tree foot parts can be used for a variety of panel thicknesses.
Compare
Compare
4000 pcs.
Black (BK) T50SOSFT6.5LG-E4-PA66HIRHSUV-BK 157-00455
Fixing tie for hole (round), ⌀2.0-30.0mm, black, 500pcs.
Fir tree foot parts can be used for a variety of panel thicknesses.
Compare
T50SOSFT7-E-PA66HIRHS-BK 157-00456
Compare
Fir tree foot parts can be used for a variety of panel thicknesses.
Compare
Compare
500 pcs.
Black (BK) T50SOSFT7-E-PA66HIRHS-BK 157-00456
Fixing tie for cable bundles/with pipe/tube holder, ⌀1.0-35.0mm, black, 500pcs.
All-in-one bundling and mounting solution reduces costs.
Compare
T50SVC5-PA66HIRHSUV/PA66HS-BK 156-02535
Compare
All-in-one bundling and mounting solution reduces costs.
Compare
Compare
500 pcs.
Black (BK) T50SVC5-PA66HIRHSUV/PA66HS-BK 156-02535
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Compare
T50ROC1A-PA66HS/PA66HIRHS-BK 156-00767
Compare
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Compare
Compare
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00767
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Compare
T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00777
Compare
Compare
Compare
500 pcs.
Black (BK) T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00777
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Compare
T50SVC6.5-PA66HS/PA66HIRHS-BK 156-02006
Compare
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Compare
Compare
500 pcs.
Black (BK) T50SVC6.5-PA66HS/PA66HIRHS-BK 156-02006
Fixing tie with pipe/tube holder, ⌀4.0-31.0mm, natural/black, 500pcs.
Compare
T30ROC2B-PA46/PA66HIRHS-NA/BK 156-00838
Compare
Compare
Compare
500 pcs.
Natural (NA), Black (BK) T30ROC2B-PA46/PA66HIRHS-NA/BK 156-00838
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 250pcs.
Compare
T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01244
Compare
Compare
Compare
250 pcs.
Black (BK) T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01244
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
T50SVC3.5-PA66HS/PA66HIRHS-BK 156-01350
Compare
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Compare
1000
Black (BK) T50SVC3.5-PA66HS/PA66HIRHS-BK 156-01350
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 500pcs.
The 360 degree enclosure ensures the entire bundle is secure when being routed by this clip.
Compare
T50RLOC10-14-PA66HS/PA66HIRHS-BK 156-01179
Compare
The 360 degree enclosure ensures the entire bundle is secure when being routed by this clip.
Compare
Compare
500 pcs.
Black (BK) T50RLOC10-14-PA66HS/PA66HIRHS-BK 156-01179
Fixing tie with pipe/tube holder, ⌀8.0-10.0mm, black, 2000
Independent rotation allows for adjustable routing orientation.
Compare
T50SVCMOC9M-PA66HIRHSUV-BK 156-02243
Compare
Independent rotation allows for adjustable routing orientation.
Compare
Compare
2000
Black (BK) T50SVCMOC9M-PA66HIRHSUV-BK 156-02243
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
T50SMVCLOC10-14-PA66HIRHSUV-BK 156-02594
Compare
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Compare
1000 pcs.
Black (BK) T50SMVCLOC10-14-PA66HIRHSUV-BK 156-02594
Fixing tie with pipe/tube holder, ⌀17.0-21.8mm, black, 1000pcs.
Independent rotation allows for adjustable routing orientation.
Compare
T50SMVCMOC19M-PA66HIRHSUV-BK 156-01779
Compare
Independent rotation allows for adjustable routing orientation.
Compare
Compare
1000
Black (BK) T50SMVCMOC19M-PA66HIRHSUV-BK 156-01779
Fixing tie with pipe/tube holder, ⌀8.0-10.0mm, black, 1000pcs.
Independent rotation allows for adjustable routing orientation.
Compare
T50SMVCMOC9M180-PA66HIRHSUV-BK 156-01786
Compare
Independent rotation allows for adjustable routing orientation.
Compare
Compare
1000 pcs.
Black (BK) T50SMVCMOC9M180-PA66HIRHSUV-BK 156-01786
Fixing tie with pipe/tube holder, ⌀9.5-11.5mm, black, 1000pcs.
Independent rotation allows for adjustable routing orientation.
Compare
T50SMVCMOC10M180-PA66HIRHSUV-BK 156-01787
Compare
Independent rotation allows for adjustable routing orientation.
Compare
Compare
1000
Black (BK) T50SMVCMOC10M180-PA66HIRHSUV-BK 156-01787
Fixing tie with pipe/tube holder, ⌀13.0-15.8mm, black, 2000pcs.
Independent rotation allows for adjustable routing orientation.
Compare
T50SMVCMOC14M180-PA66HIRHSUV-BK 156-01789
Compare
Independent rotation allows for adjustable routing orientation.
Compare
Compare
2000 pcs.
Black (BK) T50SMVCMOC14M180-PA66HIRHSUV-BK 156-01789
Fixing tie with pipe/tube holder, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCTCL14B, simple and safe guidance of corrugated tubes, cable tie enables parallel guidance.
Compare
T50ROSCTCL14A-PA66HS/PA66HIRHS-BK 156-03353
Compare
T50ROSCTCL14B, simple and safe guidance of corrugated tubes, cable tie enables parallel guidance.
Compare
Compare
500 pcs.
Black (BK) T50ROSCTCL14A-PA66HS/PA66HIRHS-BK 156-03353
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
T50SOSSBS5-PA66HS/PA66HIRHS-BK 156-03360
Compare
Cable ties with various weld stud fixing methods.
Compare
Compare
500 pcs.
Black (BK) T50SOSSBS5-PA66HS/PA66HIRHS-BK 156-03360
Fixing tie for stud, inside serrated, ⌀1.5-80.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
T80ISBS5-PA66HS/PA66HIRHS-BK 156-01363
Compare
Cable ties with various weld stud fixing methods.
Compare
Compare
500 pcs.
Black (BK) T80ISBS5-PA66HS/PA66HIRHS-BK 156-01363
Fixing tie for stud, outside serrated, ⌀3.0-45.0mm, black, 500pcs.
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
T50ROSGBS8CA-PA66HS/PA66HIRHS-BK 156-00768
Compare
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
Compare
500 pcs.
Black (BK) T50ROSGBS8CA-PA66HS/PA66HIRHS-BK 156-00768
Fixing tie for stud, outside serrated, ⌀3.0-45.0mm, black, 500pcs.
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
T50ROSGBS8CB-PA66HS/PA66HIRHS-BK 156-00769
Compare
T50SOSAS-Series offset stud mount cable ties combined with SB5-6 stud mounts to route cables in parallel (e. g. for HV harness applications).
Compare
Compare
500 pcs.
Black (BK) T50ROSGBS8CB-PA66HS/PA66HIRHS-BK 156-00769

Results for "hard line high frequency" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  South Korea

소셜 미디어

© HellermannTyton 2026 (v4.315)  |  업데이트: 06/09/2026  |  개인 정보 설정
문의