Results for "screw mount cable holder" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

SBT50-M12-PA66HSUV-BK 157-00025

Compare

Add to watchlist

Compare

Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) SBT50-M12-PA66HSUV-BK 157-00025

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀3.0-30mm, black, 100pcs.

RT50SOSSBU-M8-HSW

Compare

RT50SOSSBU-M8-PA66HSW-BK 157-00347

Compare

Add to watchlist

RT50SOSSBU-M8-HSW

Compare

Fixing tie for stud, ⌀3.0-30mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) RT50SOSSBU-M8-PA66HSW-BK 157-00347

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H7P-PA66-NA 211-60079

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H7P-PA66-NA 211-60079

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU11-AL-NA 211-10110

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU26C-AL/CR-BK 211-15260

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU29C-AL/CR-BK 211-15290

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

T50SOSSBD-M5-PA66HSUV-BK 157-00044

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50SOSSBD-M5-PA66HSUV-BK 157-00044

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

SBT120-M10-PA66HSUV-BK 157-00020

Compare

Add to watchlist

Compare

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Compare

Add to watchlist

25 pcs.

Black (BK) SBT120-M10-PA66HSUV-BK 157-00020

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

SBT120-M8-PA66HSUV-BK 157-00023

Compare

Add to watchlist

Compare

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Compare

Add to watchlist

25 pcs.

Black (BK) SBT120-M8-PA66HSUV-BK 157-00023

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

SBT50-M6-PA66HSUV-BK 157-00026

Compare

Add to watchlist

Compare

Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) SBT50-M6-PA66HSUV-BK 157-00026

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

SBT50-M8-PA66HSUV-BK 157-00027

Compare

Add to watchlist

Compare

Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) SBT50-M8-PA66HSUV-BK 157-00027

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀1-35.0mm, black, 500pcs.

1-piece fixing ties for weld studs 6mm

Compare

T50SOSSBS6E-PA66HS-BK 157-00211

Compare

Add to watchlist

1-piece fixing ties for weld studs 6mm

Compare

Fixing tie for stud, ⌀1-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSSBS6E-PA66HS-BK 157-00211

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU17C-AL/CR-BK 211-15170

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU19C-AL/CR-BK 211-15190

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Compare

ALU23C-AL/CR-BK 211-15230

Compare

Add to watchlist

ALU23C P-Clamp with chloroprene insert.

Compare

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU24C-AL/CR-BK 211-15240

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU25C-AL/CR-BK 211-15250

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU28C-AL/CR-BK 211-15280

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU30C-AL/CR-BK 211-15300

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU8-AL-NA 211-10080

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

SBT120-M12-PA66HSUV-BK 157-00021

Compare

Add to watchlist

Compare

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Compare

Add to watchlist

25 pcs.

Black (BK) SBT120-M12-PA66HSUV-BK 157-00021

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

T50SOSSBU-M8/10 for bundles which run below the stud.

Compare

T50SOSSBU-M10-PA66HSW-GY 157-00067

Compare

Add to watchlist

T50SOSSBU-M8/10 for bundles which run below the stud.

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU10-AL-NA 211-10100

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU13C-AL/CR-BK 211-15130

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU14C-AL/CR-BK 211-15140

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU16C-AL/CR-BK 211-15160

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU18C-AL/CR-BK 211-15180

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU22C-AL/CR-BK 211-15220

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU4C-AL/CR-BK 211-15040

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU7-AL-NA 211-10070

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU6-AL-NA 211-10060

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

T50SOSSBD-M6-PA66HSUV-BK 157-00038

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

T50SOSSBD-M8-PA66HSW-BK 157-00039

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

T50SOSSBD-M10-PA66HSW-BK 157-00040

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

T50SOSSBU-M6-PA66HSUV-GY 157-00065

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

T50SOSSBU-M8-PA66HSW-GY 157-00066

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU11C-AL/CR-BK 211-15110

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU15C-AL/CR-BK 211-15150

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU20C-AL/CR-BK 211-15200

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU4-AL-NA 211-10040

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU5-AL-NA 211-10050

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU5C-AL/CR-BK 211-15050

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU6C-AL/CR-BK 211-15060

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU7C-AL/CR-BK 211-15070

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU9C-AL/CR-BK 211-15090

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU10C-CR/AL-BK 211-15100

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU12C-AL/CR-BK 211-15120

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU8C-AL/CR-BK 211-15080

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Flexible head wraps around cable bundle for easy installation.

Compare

RT50RS5-PA66-BK 115-07110

Compare

Add to watchlist

Flexible head wraps around cable bundle for easy installation.

Compare

Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) RT50RS5-PA66-BK 115-07110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "screw mount cable holder" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

‹ › ×