Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
09/10/2025

Results for "D-Clip Series"

624 products found 16 further hits
Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (464)

Cable Ties Inside Serrated  (148) Cable Ties Outside Serrated  (18) Cable Ties Without Serration  (5) Cable Ties, Releasable  (7) Cable Ties, Stainless Steel  (11) Cable Ties With Fixing Elements  (114) Cable Tie Mounts  (59) Fixing Elements  (41) Clips, Clamps and Plugs  (93)
Cable Ties and Fixings
Cable Ties and Fixings (464)
Insulation

Insulation  (127)

Heat Shrink Tubing  (13) Heat Shrinkable Moulded Shapes  (115) Insulating tubes  (1)
Insulation
Insulation (127)
Cable Protection Systems

Cable Protection Systems  (23)

Non-Metallic Conduit Systems  (1) Protective Tubing and Spiral Binding  (6) Expandable Braided Sleeves  (10) Open Woven Sleeves  (10) Grommets  (2) Wiring Ducts and Accessories  (4)
Cable Protection Systems
Cable Protection Systems (23)
Identification Systems

Identification Systems  (3)

Wire and Cable Markers  (3)
Identification Systems
Identification Systems (3)
Application Tooling

Application Tooling  (10)

Automatic Cable Tying System  (3) Application Tooling for Cable Ties  (4) Application Tooling for Snappers  (1) Application Tooling for Braided Sleeves  (2)
Application Tooling
Application Tooling (10)
624 products
Reset all
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.
LKCSF1-PA66-BK 151-27202
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) LKCSF1-PA66-BK 151-27202
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
HDM400-PA66HIRHSUV-BK 151-01224
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) HDM400-PA66HIRHSUV-BK 151-01224
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.
HDM401-PA66HIRHSUV-BK 151-07300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) HDM401-PA66HIRHSUV-BK 151-07300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.3 mm, 3/8" (M10) Screw, black, 100pcs.
Arched
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.3 mm, 3/8" (M10) Screw, black, 100pcs.
HDM375BDM4W-R-PA66HIRHSUV-BK 151-02104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) HDM375BDM4W-R-PA66HIRHSUV-BK 151-02104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
SAM83-PA66HIRHS-GY 151-29600
Compare
Add to watchlist
500 pcs.
Grey (GY) SAM83-PA66HIRHS-GY 151-29600
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22mm, black, 100pcs.
T18R-PA66W-BK 111-01960
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66W-BK 111-01960
Fixing tie for stud, ⌀2.0-50.0mm, black, 3000pcs.
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
Fixing tie for stud, ⌀2.0-50.0mm, black, 3000pcs.
T50ROSLPM6SMSO25-PA66HIRHSUV-BK 157-00335
Compare
Add to watchlist
3000 pcs.
Black (BK) T50ROSLPM6SMSO25-PA66HIRHSUV-BK 157-00335
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00172
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00172
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Compare
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1A-PA66HS/PA66HIRHS-BK 156-00767
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00767
Fixing tie with pipe/tube holder, ⌀8.0-10.0mm, black, 2000
Independent rotation allows for adjustable routing orientation.
Compare
Fixing tie with pipe/tube holder, ⌀8.0-10.0mm, black, 2000
T50SVCMOC9M-PA66HIRHSUV-BK 156-02243
Compare
Add to watchlist
2000
Black (BK) T50SVCMOC9M-PA66HIRHSUV-BK 156-02243
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EdgeClip cable and tube clips are suitable for the low-vibration routing of cables and tubes with larger bundle diameters.
Compare
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EC27-PA66HIRHS-BK 151-00161
Compare
Add to watchlist
500 pcs.
Black (BK) EC27-PA66HIRHS-BK 151-00161
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for adhesive use, Wmax=2.7mm, black, 100pcs.
SolidTack Family with special adhesive.
Compare
Cable tie mount for adhesive use, Wmax=2.7mm, black, 100pcs.
MB2APT-A-PA66-BK 151-02243
Compare
Add to watchlist
100 pcs.
Black (BK) MB2APT-A-PA66-BK 151-02243
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Compare
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
EC33-PA66HIRHS-BK 151-00192
Compare
Add to watchlist
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192
Fixing tie with pipe/tube holder, inside serrated, ⌀5.0-9.0mm, black, 1000pcs.
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀5.0-9.0mm, black, 1000pcs.
T50RLOC5-9-SET-PA66HS/PA66HIRHSUV-BK 156-01289
Compare
Add to watchlist
1000 pcs.
Black (BK) T50RLOC5-9-SET-PA66HS/PA66HIRHSUV-BK 156-01289
Fixing tie with pipe/tube holder, inside serrated, ⌀15.0-19.0mm, black, 1000pcs.
The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀15.0-19.0mm, black, 1000pcs.
T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292
Compare
Add to watchlist
2000 pcs.
Black (BK) T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
Extreme temperature range for excellent performance in a range of environments.
Compare
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
PT220-PEEK-BGE 111-01235
Compare
Add to watchlist
100 pcs.
Beige (BGE) PT220-PEEK-BGE 111-01235
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M8-PA66HSW-BK 157-00039
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M10-PA66HSW-BK 157-00040
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M6-PA66HSUV-GY 157-00065
Compare
Add to watchlist
100 pcs.
Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, black, 2000pcs.
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, black, 2000pcs.
T50ROSM6SMSO25-PA66HIRHSUV-BK 157-00325
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROSM6SMSO25-PA66HIRHSUV-BK 157-00325
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Compare
Add to watchlist
500 pcs.
Grey (GY) T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.
T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Compare
Add to watchlist
3000 pcs.
Grey (GY) T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
OS170-FT7-PA66-BK 157-00017
Compare
Add to watchlist
100 pcs.
Black (BK) OS170-FT7-PA66-BK 157-00017
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
OS170-FT7-LH-PA66-BK 157-00019
Compare
Add to watchlist
100 pcs.
Black (BK) OS170-FT7-LH-PA66-BK 157-00019
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
T50SOSFT8E-PA46-GY 157-00115
Compare
Add to watchlist
1000 pcs.
Grey (GY) T50SOSFT8E-PA46-GY 157-00115
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSSBH5SD-PA66HS-BK 156-01405
Compare
Add to watchlist
500 pcs.
Black (BK), Black (BK) T50ROSSBH5SD-PA66HS-BK 156-01405
Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, black, 100pcs.
T40R-PA66HS-BK 111-01623
Compare
Add to watchlist
100 pcs.
Black (BK) T40R-PA66HS-BK 111-01623
Hook and loop cable tie, 200x12.5mm, Dmax=60.0mm, black, 10pcs.
TEXTIE M Black quick and simple re-usable
Compare
Hook and loop cable tie, 200x12.5mm, Dmax=60.0mm, black, 10pcs.
TEXTIE M-PA66/PP-BK 130-00013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
10 pack
Black (BK) TEXTIE M-PA66/PP-BK 130-00013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), inside serrated, ⌀1.0-40.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.0-40.0mm, black, 500pcs.
T40RFT8GSD-PA66HS/PA66HIRHS-BK 156-00104
Compare
Add to watchlist
500 pcs.
Black (BK) T40RFT8GSD-PA66HS/PA66HIRHS-BK 156-00104
Fixing tie for hole (round), outside serrated, ⌀5.0-15.0mm, black, 500pcs.
T50SOSDSFT6.5 for parallel routing.
Compare
Fixing tie for hole (round), outside serrated, ⌀5.0-15.0mm, black, 500pcs.
T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
Compare
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
ATSFT5LG-PA66HIRHS-BK 102-67050
Compare
Add to watchlist
5000 pcs.
Black (BK) ATSFT5LG-PA66HIRHS-BK 102-67050
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M6-PA66HSUV-BK 157-00038
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, natural, 1000pcs.
Fixing tie with stand-off for round holes and with arrowhead.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, natural, 1000pcs.
T50SAH-PA66HS-NA 155-41102
Compare
Add to watchlist
1000 pcs.
Natural (NA) T50SAH-PA66HS-NA 155-41102
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 4000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 4000pcs.
T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Compare
Add to watchlist
4000 pcs.
Grey (GY) T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
T50SOSFT6D10E-PA46-GY 157-00028
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SOSFT6D10E-PA46-GY 157-00028
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 5000pcs.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 5000pcs.
T50SOSFT6E3-PA66HIRHS-BK 157-00241
Compare
Add to watchlist
5000 pcs.
Black (BK) T50SOSFT6E3-PA66HIRHS-BK 157-00241
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 500pcs.
The 360 degree enclosure ensures the entire bundle is secure when being routed by this clip.
Compare
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 500pcs.
T50RLOC10-14-PA66HS/PA66HIRHSUV-BK 156-01093
Compare
Add to watchlist
500 pcs.
Black (BK) T50RLOC10-14-PA66HS/PA66HIRHSUV-BK 156-01093
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
Compare
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
CCOVAL2-PA66HIRHSUV-BK 151-01108
Compare
Add to watchlist
5000 pcs.
Black (BK) CCOVAL2-PA66HIRHSUV-BK 151-01108
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Compare
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
CCEC6-PA66HIRHS-BK 150-92600
Compare
Add to watchlist
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Bundling clip for edge, L=46.5mm, black, 500pcs.
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Compare
Bundling clip for edge, L=46.5mm, black, 500pcs.
EC17-PA66HIRHS-BK 151-03403
Compare
Add to watchlist
500 pcs.
Black (BK) EC17-PA66HIRHS-BK 151-03403
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
2-piece Fixing tie for round holes made from PA46.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
T50RFT8GSD-PA46-GY 156-00235
Compare
Add to watchlist
1000 pcs.
Grey (GY) T50RFT8GSD-PA46-GY 156-00235
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
WSSFT9A-PA66HIRHSUV-BK 156-00068
Compare
Add to watchlist
100 pcs.
Black (BK) WSSFT9A-PA66HIRHSUV-BK 156-00068
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
Compare
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
MB4APT-A-PA66-BK 151-02245
Compare
Add to watchlist
100 pcs.
Black (BK) MB4APT-A-PA66-BK 151-02245
Thin Wall Heat Shrinkable Tubing 4:1 8/2 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Compare
Thin Wall Heat Shrinkable Tubing 4:1 8/2 black
EPS-400-8/2-PO-X-BK 341-08020
Compare
Add to watchlist
150 metre
Black (BK) EPS-400-8/2-PO-X-BK 341-08020
Thin Wall Heat Shrinkable Tubing 4:1 12/3 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Compare
Thin Wall Heat Shrinkable Tubing 4:1 12/3 black
EPS-400-12/3-PO-X-BK 341-12030
Compare
Add to watchlist
100 metre
Black (BK) EPS-400-12/3-PO-X-BK 341-12030
Thin Wall Heat Shrinkable Tubing 4:1 24/6 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Compare
Thin Wall Heat Shrinkable Tubing 4:1 24/6 black
EPS-400-24/6-PO-X-BK 341-24060
Compare
Add to watchlist
50 metre
Black (BK) EPS-400-24/6-PO-X-BK 341-24060
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fixing tie to use on studs and several parts of this product can be fixed on one welding stud due to the flat geometry.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSWSP5E-2-PA66HS-BK 133-01553
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSWSP5E-2-PA66HS-BK 133-01553
Fixing tie for stud, ⌀1.0-35.0mm, black, 1000pcs.
The T50SSBS50T-E allows very precise routing of cable bundles.
Compare
Fixing tie for stud, ⌀1.0-35.0mm, black, 1000pcs.
T50SSBS6OT-E-PA66HS-BK 157-00083
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SSBS6OT-E-PA66HS-BK 157-00083
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
T50SOSSFT6.5E-PA66HS-BK 126-03102
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSFT6.5E-PA66HS-BK 126-03102
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
Compare
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
T60SOSSFT70x120-E-MD-PA66HS-BK 126-00079
Compare
Add to watchlist
500 pcs.
Black (BK) T60SOSSFT70x120-E-MD-PA66HS-BK 126-00079
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, black, 500pcs.
1-piece fixing tie with fir tree for a round hole.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, black, 500pcs.
T50SOSFT6D10E-PA66HS-BK 157-00045
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSFT6D10E-PA66HS-BK 157-00045
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVC6.5-PA66HS/PA66HIRHS-BK 156-00155
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC6.5-PA66HS/PA66HIRHS-BK 156-00155
Connector clip for hole (oval)/for connector, black, 1000pcs.
For a secure fixation simply push the connector by hand on our Connector Clip YCCFT62x122.
Compare
Connector clip for hole (oval)/for connector, black, 1000pcs.
YCCFT62x122-PA66HIRHS-BK 151-00180
Compare
Add to watchlist
1000 pcs.
Black (BK) YCCFT62x122-PA66HIRHS-BK 151-00180
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CCOVAL-PA66HIRHSUV-BK 151-00925
Compare
Add to watchlist
5000 pcs.
Black (BK) CCOVAL-PA66HIRHSUV-BK 151-00925
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC14-PA66HIRHS-BK 151-03404
Compare
Add to watchlist
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC15-PA66HIRHS-BK 151-03401
Compare
Add to watchlist
500 pcs.
Black (BK) EC15-PA66HIRHS-BK 151-03401
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
Oval fir tree firmly secures clip to mounting surface.
Compare
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Compare
Add to watchlist
1000 pcs.
Black (BK) WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Compare
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.
DCT11-PA66HIRHSUV-BK 115-31100
Compare
Add to watchlist
50 pcs.
Black (BK) DCT11-PA66HIRHSUV-BK 115-31100
Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 50pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Compare
Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 50pcs.
DCT9-PA66HIRHSUV-BK 115-30900
Compare
Add to watchlist
50 bag
Black (BK) DCT9-PA66HIRHSUV-BK 115-30900
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
SolidTack Family with special adhesive.
Compare
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
MB3APT-A-PA66-BK 151-02244
Compare
Add to watchlist
100 pcs.
Black (BK) MB3APT-A-PA66-BK 151-02244
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
T18R-PA66-NA 111-01919
Compare
Add to watchlist
100 pcs.
Natural (NA) T18R-PA66-NA 111-01919
Cable grommet, ⌀12.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1203.
Compare
Cable grommet, ⌀12.0 mm, black, 1000pcs.
HV1203-PVC-FR-BK 633-02030
Compare
Add to watchlist
1000 pcs.
Black (BK) HV1203-PVC-FR-BK 633-02030
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
The mount’s rounded tip allows for a smoother surface in case of contact with surrounding components or hands.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSKSFT5.4E-PA66HS-BK 126-00075
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSKSFT5.4E-PA66HS-BK 126-00075
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
Fixing bracket for an oval hole with a seal for protection against e.g. dust and splash water.
Compare
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
T60SOSSFT62x122-E-MD-PA66HS-BK 126-00080
Compare
Add to watchlist
500 pcs.
Black (BK) T60SOSSFT62x122-E-MD-PA66HS-BK 126-00080
Fixing tie for hole (round), inside serrated, ⌀6.0-50.0mm, black, 1000pcs.
Arrowhead mount cable tie features an extended pawl to release the tie for bundle maintenance.
Compare
Fixing tie for hole (round), inside serrated, ⌀6.0-50.0mm, black, 1000pcs.
RT50SFK-PA66-BK 115-06960
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) RT50SFK-PA66-BK 115-06960
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (round), black, 500pcs.
Connector Clip for Connectors with AMP connection, with fir tree for round holes.
Compare
Connector clip for hole (round), black, 500pcs.
FT6LG-AMP-PA66HIRHS-BK 155-03800
Compare
Add to watchlist
500 pcs.
Black (BK) FT6LG-AMP-PA66HIRHS-BK 155-03800
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
TC5FT6S-PA66HIRHS-BK 150-95500
Compare
Add to watchlist
1000 pcs.
Black (BK) TC5FT6S-PA66HIRHS-BK 150-95500
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
TC4FT6LG-PA66HIRHS-BK 151-00215
Compare
Add to watchlist
10000 pcs.
Black (BK) TC4FT6LG-PA66HIRHS-BK 151-00215
Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 500pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Compare
Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 500pcs.
DCT9-PA66HIRHSUV-BK 115-00034
Compare
Add to watchlist
500 pcs.
Black (BK) DCT9-PA66HIRHSUV-BK 115-00034
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
Staggered fir tree branch design provides low insertion forces and high extraction forces.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Compare
Add to watchlist
1000 pcs.
Black (BK) T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Head allows for a 0.2
Compare
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, green, 500pcs.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, green, 500pcs.
T50SOSSFT6.5E-MDL-PA66HS-GN 126-03100
Compare
Add to watchlist
500 pcs.
Green (GN) T50SOSSFT6.5E-MDL-PA66HS-GN 126-03100
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
1-piece fixing tie with fir tree for a round hole.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
T50SOSFT8E-PA66HS-BK 157-00072
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SOSFT8E-PA66HS-BK 157-00072
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Fixing tie for stud fixation and for multipile routing.
Compare
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Compare
Add to watchlist
500 pcs.
Black (BK) T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Compare
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A-PEEK-BGE 118-00032
Compare
Add to watchlist
100 pcs.
Beige (BGE) PT2A-PEEK-BGE 118-00032
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 black
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 black
HFT-A-4.8/2.4-PO-X-BK 305-04800
Compare
Add to watchlist
300 metre
Black (BK) HFT-A-4.8/2.4-PO-X-BK 305-04800
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 black
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 black
HFT-A-25.4/12.7-PO-X-BK 305-25400
Compare
Add to watchlist
50 metre
Black (BK) HFT-A-25.4/12.7-PO-X-BK 305-25400
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 9/3 black
Compare
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 9/3 black
HIS-A-9/3-PO-X-BK 308-10900
Compare
Add to watchlist
1 pcs.
Black (BK) HIS-A-9/3-PO-X-BK 308-10900
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc and flat arrow head.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSKSFT6.5E-PA66HS-BK 126-00081
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSKSFT6.5E-PA66HS-BK 126-00081
Fixing tie for hole (round), inside serrated, ⌀7.0-45.0mm, black, 500pcs.
T80RSFT - The 'tab' on the head of the tie makes it easy to locate and lift the head for assembly.
Compare
Fixing tie for hole (round), inside serrated, ⌀7.0-45.0mm, black, 500pcs.
T80RSFT-PA66HS-BK 150-15493
Compare
Add to watchlist
500 pcs.
Black (BK) T80RSFT-PA66HS-BK 150-15493
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 04/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.287) | Update: 04/10/2025 | Privacy Settings
Contact