Results for "211-60069 Ratchet P-Clamp" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

참고사항: 검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다. 다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

엔지니어 보기

Sustainable

엔지니어 보기

Sustainable

모두 초기화

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Compare

RCD90SM10SS-PA66HIRHSUV/SS304-BK 151-02034

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160

Black (BK) RCD90SM10SS-PA66HIRHSUV/SS304-BK 151-02034

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.

Compare

RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.

Compare

RCD90SM12SS-PA66HIRHSUV/SS304-BK 151-02035

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160

Black (BK) RCD90SM12SS-PA66HIRHSUV/SS304-BK 151-02035

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.

Compare

RCD90SM6SS-PA66HIRHSUV/SS304-BK 151-02032

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160

Black (BK) RCD90SM6SS-PA66HIRHSUV/SS304-BK 151-02032

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.

Compare

RCD90SM8-PA666V0/ST/ZN-BK 151-02877

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160

Black (BK) RCD90SM8-PA666V0/ST/ZN-BK 151-02877

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.

Compare

RCD90SM8SS-PA666V0/SS304-BK 151-03011

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160

Black (BK) RCD90SM8SS-PA666V0/SS304-BK 151-03011

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Compare

RCD90SM8SS-PA66HIRHSUV/SS304-BK 151-02033

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160

Black (BK) RCD90SM8SS-PA66HIRHSUV/SS304-BK 151-02033

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.

Compare

RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875

Compare

Add to watchlist

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457

Compare

Add to watchlist

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCA180SM10.

Compare

RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390

Compare

Add to watchlist

RCA180SM10.

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440

Compare

Add to watchlist

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Compare

RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057

Compare

Add to watchlist

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492

Compare

Add to watchlist

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Compare

Add to watchlist

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=2.0-4.0mm, ⌀9.0 x 18.0 mm

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

IRCCSFT9X18-PA66HS-BK 156-04008

Compare

Add to watchlist

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

Cable clip, T=2.0-4.0mm, ⌀9.0 x 18.0 mm

Compare

Add to watchlist

2500 pcs.

Black (BK) IRCCSFT9X18-PA66HS-BK 156-04008

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H9P-PA66HS-BK 211-60008

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H9P-PA66HS-BK 211-60008

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Compare

IRCAMB5A-PA66HIRHSUV-BK 156-02624

Compare

Add to watchlist

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Compare

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

250

Black (BK) IRCAMB5A-PA66HIRHSUV-BK 156-02624

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Compare

IRCAMB5A-PA66HIRHSUV-BK 156-02722

Compare

Add to watchlist

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Compare

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

25

Black (BK) IRCAMB5A-PA66HIRHSUV-BK 156-02722

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Compare

IRCCMB5A-PA66HIRHSUV-BK 156-02644

Compare

Add to watchlist

Compare

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Compare

Add to watchlist

250

Black (BK) IRCCMB5A-PA66HIRHSUV-BK 156-02644

Cable clip, Dmin=36.0mm, Dmax=51.0mm

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Compare

IRCDMB5A-PA66HIRHSUV-BK 156-02654

Compare

Add to watchlist

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Compare

Cable clip, Dmin=36.0mm, Dmax=51.0mm

Compare

Add to watchlist

200

Black (BK) IRCDMB5A-PA66HIRHSUV-BK 156-02654

Cable clip, Dmin=36.01mm, Dmax=50.8mm

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Compare

IRCDMB5A-PA66HIRHSUV-BK 156-02725

Compare

Add to watchlist

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Compare

Cable clip, Dmin=36.01mm, Dmax=50.8mm

Compare

Add to watchlist

25

Black (BK) IRCDMB5A-PA66HIRHSUV-BK 156-02725

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Compare

IRCBMB5A-PA66HIRHSUV-BK 156-02634

Compare

Add to watchlist

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

250 pcs.

Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02634

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀9.0 x 17.0 mm, Dmin=6.10mm, Dmax=13.72mm

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

IRCAFT9x17-PA66HIRHS/PA66HIRHSUV-BK/OG 156-04061

Compare

Add to watchlist

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

Cable clip, ⌀9.0 x 17.0 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

250 pcs.

Orange (OG), High Voltage (HV), Black (BK) IRCAFT9x17-PA66HIRHS/PA66HIRHSUV-BK/OG 156-04061

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=6.10mm, Dmax=13.72mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCAFT9LG-PA66HIRHSUV-BK 156-02620

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

250

Black (BK) IRCAFT9LG-PA66HIRHSUV-BK 156-02620

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=6.10mm, Dmax=13.72mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCAFT9LG-PA66HIRHSUV-BK 156-02714

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

25

Black (BK) IRCAFT9LG-PA66HIRHSUV-BK 156-02714

Cable clip, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

IRCAFT6.5-PA66HIRHS/PA66HIRHSUV-BK/OG 156-04059

Compare

Add to watchlist

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

Cable clip, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

250 pcs.

Orange (OG), High Voltage (HV), Black (BK) IRCAFT6.5-PA66HIRHS/PA66HIRHSUV-BK/OG 156-04059

Cable clip, ⌀9.0 mm, Dmin=6.10mm, Dmax=13.72mm

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

IRCAFT9-PA66HIRHS/PA66HIRHSUV-BK/OG 156-04060

Compare

Add to watchlist

The Inline Ratchet Clamp family is a perfect fit when facing space constraints.

Compare

Cable clip, ⌀9.0 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

250 pcs.

Orange (OG), High Voltage (HV), Black (BK) IRCAFT9-PA66HIRHS/PA66HIRHSUV-BK/OG 156-04060

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=12.70mm, Dmax=19.56mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCBFT9LG-PA66HIRHSUV-BK 156-02630

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

250

Black (BK) IRCBFT9LG-PA66HIRHSUV-BK 156-02630

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=12.70mm, Dmax=19.56mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCBFT9LG-PA66HIRHSUV-BK 156-02715

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

25

Black (BK) IRCBFT9LG-PA66HIRHSUV-BK 156-02715

Cable clip, Dmin=12.7mm, Dmax=19.6mm

Ratchet Clamp ATI solar clip.

Compare

IRCBATI-PA66HIRHSUV/SS304-BK 156-04196

Compare

Add to watchlist

Ratchet Clamp ATI solar clip.

Compare

Cable clip, Dmin=12.7mm, Dmax=19.6mm

Compare

Add to watchlist

200

Black (BK) IRCBATI-PA66HIRHSUV/SS304-BK 156-04196

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=19.30mm, Dmax=36.01mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCCFT9LG-PA66HIRHSUV-BK 156-02640

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=19.30mm, Dmax=36.01mm

Compare

Add to watchlist

250

Black (BK) IRCCFT9LG-PA66HIRHSUV-BK 156-02640

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=19.30mm, Dmax=36.01mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCCFT9LG-PA66HIRHSUV-BK 156-02716

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=19.30mm, Dmax=36.01mm

Compare

Add to watchlist

25

Black (BK) IRCCFT9LG-PA66HIRHSUV-BK 156-02716

Cable clip, Dmin=19.3mm, Dmax=36.1mm

Compare

IRCCATI-PA66HIRHSUV/SS304-BK 156-04197

Compare

Add to watchlist

Compare

Cable clip, Dmin=19.3mm, Dmax=36.1mm

Compare

Add to watchlist

200

Black (BK) IRCCATI-PA66HIRHSUV/SS304-BK 156-04197

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=36.01mm, Dmax=50.8mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCDFT9LG-PA66HIRHSUV-BK 156-02650

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=36.01mm, Dmax=50.8mm

Compare

Add to watchlist

200

Black (BK) IRCDFT9LG-PA66HIRHSUV-BK 156-02650

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=36.01mm, Dmax=50.8mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCDFT9LG-PA66HIRHSUV-BK 156-02717

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 12.7mm, ⌀9.0 mm, Dmin=36.01mm, Dmax=50.8mm

Compare

Add to watchlist

25

Black (BK) IRCDFT9LG-PA66HIRHSUV-BK 156-02717

Cable clip, Dmin=36.1mm, Dmax=50.8mm

Compare

IRCDATI-PA66HIRHSUV/SS304-BK 156-04198

Compare

Add to watchlist

Compare

Cable clip, Dmin=36.1mm, Dmax=50.8mm

Compare

Add to watchlist

175

Black (BK) IRCDATI-PA66HIRHSUV/SS304-BK 156-04198

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H1P-PA66HS-BK 211-60000

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H1P-PA66HS-BK 211-60000

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.

Compare

RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122

Compare

Add to watchlist

Compare

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.

Compare

Add to watchlist

90 pcs.

Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀6.5 mm, 180°, black, 90pcs.

Compare

RCF180SM6SS-PA66HIRHSUV/SS304-BK 151-03203

Compare

Add to watchlist

Compare

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀6.5 mm, 180°, black, 90pcs.

Compare

Add to watchlist

90 pcs.

Black (BK) RCF180SM6SS-PA66HIRHSUV/SS304-BK 151-03203

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀12.95 mm, 180°, black, 90pcs.

Compare

RCF180SM12SS-PA66HIRHSUV/SS304-BK 151-03124

Compare

Add to watchlist

Compare

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀12.95 mm, 180°, black, 90pcs.

Compare

Add to watchlist

90

Black (BK) RCF180SM12SS-PA66HIRHSUV/SS304-BK 151-03124

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀10.29 mm, 180°, black, 90pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCF180SM10SS-PA66HIRHSUV/SS304-BK 151-03123

Compare

Add to watchlist

Compare

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀10.29 mm, 180°, black, 90pcs.

Compare

Add to watchlist

90 pcs.

Black (BK) RCF180SM10SS-PA66HIRHSUV/SS304-BK 151-03123

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCAFT6.5LG-PA66HIRHSUV-BK 156-02616

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

250

Black (BK) IRCAFT6.5LG-PA66HIRHSUV-BK 156-02616

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCAFT6.5LG-PA66HIRHSUV-BK 156-02706

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

25

Black (BK) IRCAFT6.5LG-PA66HIRHSUV-BK 156-02706

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCBFT6.5LG-PA66HIRHSUV-BK 156-02626

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

250

Black (BK) IRCBFT6.5LG-PA66HIRHSUV-BK 156-02626

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

IRCBFT6.5LG-PA66HIRHSUV-BK 156-02707

Compare

Add to watchlist

High-performing round fir trees mean no additional fastener is needed for mounting.

Compare

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

25

Black (BK) IRCBFT6.5LG-PA66HIRHSUV-BK 156-02707

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=12.70mm, Dmax=19.56mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

High-performing oval fir trees ensure anti-twist protection.

Compare

IRCBFTOVAL-PA66HIRHSUV-BK 156-02628

Compare

Add to watchlist

High-performing oval fir trees ensure anti-twist protection.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

250 pcs.

Black (BK) IRCBFTOVAL-PA66HIRHSUV-BK 156-02628

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=12.70mm, Dmax=19.56mm

High-performing oval fir trees ensure anti-twist protection.

Compare

IRCBFTOVAL-PA66HIRHSUV-BK 156-02711

Compare

Add to watchlist

High-performing oval fir trees ensure anti-twist protection.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

25

Black (BK) IRCBFTOVAL-PA66HIRHSUV-BK 156-02711

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=6.10mm, Dmax=13.72mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCAFT9X17-PA66HIRHSUV-BK 156-02622

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

250

Black (BK) IRCAFT9X17-PA66HIRHSUV-BK 156-02622

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=6.10mm, Dmax=13.72mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCAFT9X17-PA66HIRHSUV-BK 156-02718

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=6.10mm, Dmax=13.72mm

Compare

Add to watchlist

25

Black (BK) IRCAFT9X17-PA66HIRHSUV-BK 156-02718

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=12.70mm, Dmax=19.56mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCBFT9X17-PA66HIRHSUV-BK 156-02632

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

250

Black (BK) IRCBFT9X17-PA66HIRHSUV-BK 156-02632

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=12.70mm, Dmax=19.56mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCBFT9X17-PA66HIRHSUV-BK 156-02719

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=12.70mm, Dmax=19.56mm

Compare

Add to watchlist

25

Black (BK) IRCBFT9X17-PA66HIRHSUV-BK 156-02719

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=19.30mm, Dmax=36.01mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCCFT9X17-PA66HIRHSUV-BK 156-02642

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=19.30mm, Dmax=36.01mm

Compare

Add to watchlist

250

Black (BK) IRCCFT9X17-PA66HIRHSUV-BK 156-02642

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=19.30mm, Dmax=36.01mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCCFT9X17-PA66HIRHSUV-BK 156-02720

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=19.30mm, Dmax=36.01mm

Compare

Add to watchlist

25

Black (BK) IRCCFT9X17-PA66HIRHSUV-BK 156-02720

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=36.01mm, Dmax=50.8mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCDFT9X17-PA66HIRHSUV-BK 156-02652

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=36.01mm, Dmax=50.8mm

Compare

Add to watchlist

200

Black (BK) IRCDFT9X17-PA66HIRHSUV-BK 156-02652

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=36.01mm, Dmax=50.8mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCDFT9X17-PA66HIRHSUV-BK 156-02721

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 17.0 mm, Dmin=36.01mm, Dmax=50.8mm

Compare

Add to watchlist

25

Black (BK) IRCDFT9X17-PA66HIRHSUV-BK 156-02721

Cable clip, Dmin=36.0mm, Dmax=51.0mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCDSTRUT-PA66HIRHSUV-BK 156-03004

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, Dmin=36.0mm, Dmax=51.0mm

Compare

Add to watchlist

200

Black (BK) IRCDSTRUT-PA66HIRHSUV-BK 156-03004

Cable clip, Dmin=36.0mm, Dmax=51.0mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCDSTRUT-PA66HIRHSUV-BK 156-03005

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, Dmin=36.0mm, Dmax=51.0mm

Compare

Add to watchlist

25

Black (BK) IRCDSTRUT-PA66HIRHSUV-BK 156-03005

Cable clip, ⌀7.0 mm, Dmin=12.7mm, Dmax=19.56mm, ⌀M6

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Inline Center Mount series, CMRCBLM6.

Compare

CMRCBHM6-PA66HIRHSUV-BK 151-03538

Compare

Add to watchlist

Inline Center Mount series, CMRCBLM6.

Compare

Cable clip, ⌀7.0 mm, Dmin=12.7mm, Dmax=19.56mm, ⌀M6

Compare

Add to watchlist

150 pcs.

Black (BK) CMRCBHM6-PA66HIRHSUV-BK 151-03538

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀9.0 mm, Dmin=12.7mm, Dmax=19.56mm, ⌀M8

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

CMRCBHM8-PA66HIRHSUV-BK 151-03539

Compare

Add to watchlist

Compare

Cable clip, ⌀9.0 mm, Dmin=12.7mm, Dmax=19.56mm, ⌀M8

Compare

Add to watchlist

150 pcs.

Black (BK) CMRCBHM8-PA66HIRHSUV-BK 151-03539

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀7.1 mm, Dmin=19.3mm, Dmax=36.1mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

CMRCCHM6-PA66HIRHSUV-BK 151-03547

Compare

Add to watchlist

Compare

Cable clip, ⌀7.1 mm, Dmin=19.3mm, Dmax=36.1mm

Compare

Add to watchlist

150 pcs.

Black (BK) CMRCCHM6-PA66HIRHSUV-BK 151-03547

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀9.1 mm, Dmin=19.3mm, Dmax=36.1mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

CMRCCHM8-PA66HIRHSUV-BK 151-03548

Compare

Add to watchlist

Compare

Cable clip, ⌀9.1 mm, Dmin=19.3mm, Dmax=36.1mm

Compare

Add to watchlist

150 pcs.

Black (BK) CMRCCHM8-PA66HIRHSUV-BK 151-03548

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀7.0 mm, Dmin=36.1mm, Dmax=50.8mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

CMRCDHM6-PA66HIRHSUV-BK 151-03558

Compare

Add to watchlist

Compare

Cable clip, ⌀7.0 mm, Dmin=36.1mm, Dmax=50.8mm

Compare

Add to watchlist

150 pcs.

Black (BK) CMRCDHM6-PA66HIRHSUV-BK 151-03558

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀9.0 mm, Dmin=36.1mm, Dmax=50.8mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

CMRCDHM8-PA66HIRHSUV-BK 151-03559

Compare

Add to watchlist

Compare

Cable clip, ⌀9.0 mm, Dmin=36.1mm, Dmax=50.8mm

Compare

Add to watchlist

150 pcs.

Black (BK) CMRCDHM8-PA66HIRHSUV-BK 151-03559

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H17P-PA66-NA 211-60179

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.

Compare

Add to watchlist

250 pcs.

Natural (NA) H17P-PA66-NA 211-60179

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, Dmin=12.7mm, Dmax=19.5mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCBSTRUT-PA66HIRHSUV-BK 156-03000

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, Dmin=12.7mm, Dmax=19.5mm

Compare

Add to watchlist

200

Black (BK) IRCBSTRUT-PA66HIRHSUV-BK 156-03000

Cable clip, Dmin=12.7mm, Dmax=19.5mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCBSTRUT-PA66HIRHSUV-BK 156-03001

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, Dmin=12.7mm, Dmax=19.5mm

Compare

Add to watchlist

25

Black (BK) IRCBSTRUT-PA66HIRHSUV-BK 156-03001

Cable clip, Dmin=19.4mm, Dmax=36.0mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCCSTRUT-PA66HIRHSUV-BK 156-03002

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, Dmin=19.4mm, Dmax=36.0mm

Compare

Add to watchlist

200

Black (BK) IRCCSTRUT-PA66HIRHSUV-BK 156-03002

Cable clip, Dmin=19.4mm, Dmax=36.0mm

Clamp and mount combination means no extra hardware is needed.

Compare

IRCCSTRUT-PA66HIRHSUV-BK 156-03003

Compare

Add to watchlist

Clamp and mount combination means no extra hardware is needed.

Compare

Cable clip, Dmin=19.4mm, Dmax=36.0mm

Compare

Add to watchlist

25

Black (BK) IRCCSTRUT-PA66HIRHSUV-BK 156-03003

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H10P-PA66-NA 211-60109

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H10P-PA66-NA 211-60109

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H12P-PA66-NA 211-60129

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H12P-PA66-NA 211-60129

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip with pipe/tube holder, Dmin=12.7mm, Dmax=19.6mm

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

IRCBNEXTT-PA66HIRHSUV/SS304-BK 156-04192

Compare

Add to watchlist

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

Cable clip with pipe/tube holder, Dmin=12.7mm, Dmax=19.6mm

Compare

Add to watchlist

200 pcs.

Black (BK) IRCBNEXTT-PA66HIRHSUV/SS304-BK 156-04192

Cable clip with pipe/tube holder, Dmin=19.3mm, Dmax=36.1mm

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

IRCCNEXTT-PA66HIRHSUV/SS304-BK 156-04193

Compare

Add to watchlist

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

Cable clip with pipe/tube holder, Dmin=19.3mm, Dmax=36.1mm

Compare

Add to watchlist

200 pcs.

Black (BK) IRCCNEXTT-PA66HIRHSUV/SS304-BK 156-04193

Cable clip with pipe/tube holder, Dmin=36.1mm, Dmax=50.8mm

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

IRCDNEXTT-PA66HIRHSUV/SS304-BK 156-04194

Compare

Add to watchlist

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

Cable clip with pipe/tube holder, Dmin=36.1mm, Dmax=50.8mm

Compare

Add to watchlist

175 pcs.

Black (BK) IRCDNEXTT-PA66HIRHSUV/SS304-BK 156-04194

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H8P-PA66-NA 211-60089

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H8P-PA66-NA 211-60089

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H3P-PA66-NA 211-60039

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H3P-PA66-NA 211-60039

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H4P-PA66-NA 211-60049

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H4P-PA66-NA 211-60049

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H2P-PA66-NA 211-60029

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H2P-PA66-NA 211-60029

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H3P-PA66HS-BK 211-60002

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H3P-PA66HS-BK 211-60002

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H6P-PA66HS-BK 211-60005

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H6P-PA66HS-BK 211-60005

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU12-AL-NA 211-10120

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU12-AL-NA 211-10120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU13-AL-NA 211-10130

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU13-AL-NA 211-10130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU11-AL-NA 211-10110

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU26C-AL/CR-BK 211-15260

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU29C-AL/CR-BK 211-15290

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU17C-AL/CR-BK 211-15170

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU19C-AL/CR-BK 211-15190

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Compare

ALU23C-AL/CR-BK 211-15230

Compare

Add to watchlist

ALU23C P-Clamp with chloroprene insert.

Compare

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU24C-AL/CR-BK 211-15240

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU25C-AL/CR-BK 211-15250

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU28C-AL/CR-BK 211-15280

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU30C-AL/CR-BK 211-15300

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU34C-AL/CR-BK 211-15340

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU8-AL-NA 211-10080

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU10-AL-NA 211-10100

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU7-AL-NA 211-10070

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU13C-AL/CR-BK 211-15130

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "211-60069 Ratchet P-Clamp" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

South Korea

개인정보 보호 정책

Social Media

© HellermannTyton 2026 (v4.311.7) | 업데이트: 28/06/2026 | 개인 정보 설정

‹ › ×