Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
14/05/2026

Results for "211-60069 Ratchet P-Clamp" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

606 개의 제품을

		


		

			
			

		


		

			
		



		

			
		


		

		

		
	




		

	





	

		

			
			

				

					
					
				

			

			

					

						
						
					

				

			

	

	

	

		

			

				
				
						

							
								

									
										

								모두 초기화
									
							
							

						
					

		
					

							

							
								P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
								

								

							

								

									ALU22C-AL/CR-BK
211-15220
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50 pcs.


					

						
								
									Black (BK)
							
							ALU22C-AL/CR-BK
211-15220
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
								

								

							

								

									ALU24C-AL/CR-BK
211-15240
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50 pcs.


					

						
								
									Black (BK)
							
							ALU24C-AL/CR-BK
211-15240
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU4C-AL/CR-BK
211-15040
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU4C-AL/CR-BK
211-15040
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
							

							

						

							
								P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
								

								

							

								

									ALU6-AL-NA
211-10060
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Natural (NA)
							
							ALU6-AL-NA
211-10060
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
							

							

						

							
								P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
								

								

							

								

									ALU4-AL-NA
211-10040
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Natural (NA)
							
							ALU4-AL-NA
211-10040
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
							

							

						

							
								P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
								

								

							

								

									ALU5-AL-NA
211-10050
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Natural (NA)
							
							ALU5-AL-NA
211-10050
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU9C-AL/CR-BK
211-15090
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU9C-AL/CR-BK
211-15090
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU11C-AL/CR-BK
211-15110
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU11C-AL/CR-BK
211-15110
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU14C-AL/CR-BK
211-15140
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU14C-AL/CR-BK
211-15140
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU15C-AL/CR-BK
211-15150
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU15C-AL/CR-BK
211-15150
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU18C-AL/CR-BK
211-15180
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU18C-AL/CR-BK
211-15180
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
								

								

							

								

									ALU20C-AL/CR-BK
211-15200
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50 pcs.


					

						
								
									Black (BK)
							
							ALU20C-AL/CR-BK
211-15200
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU5C-AL/CR-BK
211-15050
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU5C-AL/CR-BK
211-15050
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU10C-CR/AL-BK
211-15100
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU10C-CR/AL-BK
211-15100
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU7C-AL/CR-BK
211-15070
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU7C-AL/CR-BK
211-15070
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU12C-AL/CR-BK
211-15120
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU12C-AL/CR-BK
211-15120
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU6C-AL/CR-BK
211-15060
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU6C-AL/CR-BK
211-15060
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
							

							

						

							
								P-Clips (Alu) with Rubber Insert for vibration resistance
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
								

								

							

								

									ALU8C-AL/CR-BK
211-15080
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							ALU8C-AL/CR-BK
211-15080
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, natural, 250pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, natural, 250pcs.
								

								

							

								

									ES1703AC-PA66-NA
211-00108
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						250 pcs.


					

						
								
									Natural (NA)
							
							ES1703AC-PA66-NA
211-00108
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmax=20.0mm, ⌀4.0 mm, black, 100pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=20.0mm, ⌀4.0 mm, black, 100pcs.
								

								

							

								

									NX11-PA66-BK
211-00900
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							NX11-PA66-BK
211-00900
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmax=20.0mm, ⌀4.0 mm, black, 100pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=20.0mm, ⌀4.0 mm, black, 100pcs.
								

								

							

								

									NX11-PA66-BK
211-00901
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							NX11-PA66-BK
211-00901
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmax=20.0mm, ⌀4.0 mm, black, 1000pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=20.0mm, ⌀4.0 mm, black, 1000pcs.
								

								

							

								

									NX11-PA66-BK
211-00902
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							NX11-PA66-BK
211-00902
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, black, 200pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, black, 200pcs.
								

								

							

								

									NX14-PA66-BK
211-01000
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						200


					

						
								
									Black (BK)
							
							NX14-PA66-BK
211-01000
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H7P-PA66V0-BK
211-00215
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000 pcs.


					

						
								
									Black (BK)
							
							H7P-PA66V0-BK
211-00215
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								Ratchet O-Clamp
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									Ratchet O-Clamp
								

								

							

								

									ROC18.5-22.5NXT -PA66HIRHSUV/SS-BK
151-04385
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						200 pcs.


					

						
								
									Black (BK)
							
							ROC18.5-22.5NXT -PA66HIRHSUV/SS-BK
151-04385
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.
								

								

							

								

									H13P-PA66-BK
211-60138
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H13P-PA66-BK
211-60138
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.
								

								

							

								

									H14P-PA66-BK
211-60148
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H14P-PA66-BK
211-60148
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
								

								

							

								

									H1P-PA66-BK
211-60011
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							H1P-PA66-BK
211-60011
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, red, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, red, 1000pcs.
								

								

							

								

									H2P-PA66-RD
211-60022
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Red (RD)
							
							H2P-PA66-RD
211-60022
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, blue, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, blue, 1000pcs.
								

								

							

								

									H2P-PA66-BU
211-60026
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Blue (BU)
							
							H2P-PA66-BU
211-60026
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
								

								

							

								

									H2P-PA66-BK
211-60012
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							H2P-PA66-BK
211-60012
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H2P-PA66HS-BK
211-60030
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H2P-PA66HS-BK
211-60030
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H3P-PA66-BK
211-60041
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H3P-PA66-BK
211-60041
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
								

								

							

								

									H3P-PA66-BK
211-60013
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							H3P-PA66-BK
211-60013
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H4P-PA66HS-BK
211-60064
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H4P-PA66HS-BK
211-60064
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H4P-PA66-BK
211-60051
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H4P-PA66-BK
211-60051
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
								

								

							

								

									H4P-PA66-BK
211-60014
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							H4P-PA66-BK
211-60014
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H5P-PA66-BK
211-60057
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H5P-PA66-BK
211-60057
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
								

								

							

								

									H5P-PA66-BK
211-60015
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							H5P-PA66-BK
211-60015
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H6P-PA66-BK
211-60060
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H6P-PA66-BK
211-60060
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
								

								

							

								

									H6P-PA66-BK
211-60016
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							H6P-PA66-BK
211-60016
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 100pcs.
								

								

							

								

									H6P-PA66-NA
211-00268
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							H6P-PA66-NA
211-00268
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H6P-PA66HS-BK
211-60055
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H6P-PA66HS-BK
211-60055
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H7P-PA66-BK
211-60077
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H7P-PA66-BK
211-60077
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
								

								

							

								

									H7P-PA66-BK
211-60017
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							H7P-PA66-BK
211-60017
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H7P-PA66HS-BK
211-60056
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H7P-PA66HS-BK
211-60056
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 100pcs.
								

								

							

								

									H8P-PA66-NA
211-00270
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							H8P-PA66-NA
211-00270
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H8P-PA66HS-BK
211-60062
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H8P-PA66HS-BK
211-60062
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H9P-PA66-BK
211-60097
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H9P-PA66-BK
211-60097
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
								

								

							

								

									H9P-PA66HS-BK
211-60063
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						1000


					

						
								
									Black (BK)
							
							H9P-PA66HS-BK
211-60063
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=17.4mm, Dmax=20.0mm, ⌀4.0 mm, black, 200pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=17.4mm, Dmax=20.0mm, ⌀4.0 mm, black, 200pcs.
								

								

							

								

									NX11-PA66-BK
221-10110
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						200 pcs.


					

						
								
									Black (BK)
							
							NX11-PA66-BK
221-10110
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									NX14-PA66-BK
221-10140
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100 pcs.


					

						
								
									Black (BK)
							
							NX14-PA66-BK
221-10140
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB10N-PA66-NA
211-00175
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB10N-PA66-NA
211-00175
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB10N-PA66W-BK
211-00176
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB10N-PA66W-BK
211-00176
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, natural, 100pcs.
								

								

							

								

									AB11N-PA66-NA
211-00177
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB11N-PA66-NA
211-00177
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, black, 100pcs.
								

								

							

								

									AB11N-PA66W-BK
211-00178
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB11N-PA66W-BK
211-00178
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, natural, 100pcs.
								

								

							

								

									AB12N-PA66-NA
211-00179
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB12N-PA66-NA
211-00179
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, black, 100pcs.
								

								

							

								

									AB12N-PA66W-BK
211-00180
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB12N-PA66W-BK
211-00180
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, natural, 100pcs.
								

								

							

								

									AB13N-PA66-NA
211-00181
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB13N-PA66-NA
211-00181
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, black, 100pcs.
								

								

							

								

									AB13N-PA66W-BK
211-00182
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB13N-PA66W-BK
211-00182
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, natural, 100pcs.
								

								

							

								

									AB14N-PA66-NA
211-00183
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB14N-PA66-NA
211-00183
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, natural, 100pcs.
								

								

							

								

									AB16N-PA66-NA
211-00185
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB16N-PA66-NA
211-00185
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, natural, 50pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, natural, 50pcs.
								

								

							

								

									AB18N-PA66-NA
211-00187
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									Natural (NA)
							
							AB18N-PA66-NA
211-00187
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, black, 50pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, black, 50pcs.
								

								

							

								

									AB18N-PA66W-BK
211-00188
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									Black (BK)
							
							AB18N-PA66W-BK
211-00188
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, natural, 50pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, natural, 50pcs.
								

								

							

								

									AB24N-PA66-NA
211-00189
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									Natural (NA)
							
							AB24N-PA66-NA
211-00189
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, black, 50pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, black, 50pcs.
								

								

							

								

									AB24N-PA66W-BK
211-00190
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									Black (BK)
							
							AB24N-PA66W-BK
211-00190
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB2N-PA66-NA
211-00191
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB2N-PA66-NA
211-00191
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB2N-PA66W-BK
211-00192
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB2N-PA66W-BK
211-00192
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, white, 100pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, white, 100pcs.
								

								

							

								

									AB2N-PA66V0-WH
211-00276
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									White (WH)
							
							AB2N-PA66V0-WH
211-00276
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, natural, 25pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, natural, 25pcs.
								

								

							

								

									AB32N-PA66-NA
211-00193
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						25


					

						
								
									Natural (NA)
							
							AB32N-PA66-NA
211-00193
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, black, 25pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, black, 25pcs.
								

								

							

								

									AB32N-PA66W-BK
211-00194
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						25


					

						
								
									Black (BK)
							
							AB32N-PA66W-BK
211-00194
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB3N-PA66-NA
211-00195
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB3N-PA66-NA
211-00195
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB3N-PA66W-BK
211-00197
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB3N-PA66W-BK
211-00197
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pc.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pc.
								

								

							

								

									AB-3N-PPCOND-BK
151-01344
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB-3N-PPCOND-BK
151-01344
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, white, 100pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, white, 100pcs.
								

								

							

								

									AB3N-PA66V0-WH
211-00277
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									White (WH)
							
							AB3N-PA66V0-WH
211-00277
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB4N-PA66W-BK
211-00204
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB4N-PA66W-BK
211-00204
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, white, 100pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, white, 100pcs.
								

								

							

								

									AB4N-PA66V0-WH
211-00278
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									White (WH)
							
							AB4N-PA66V0-WH
211-00278
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB5N-PA66-NA
211-00205
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB5N-PA66-NA
211-00205
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB5N-PA66W-BK
211-00206
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB5N-PA66W-BK
211-00206
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, beige, 50pcs.
							

							

						

							
								AB-5N-IVY
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, beige, 50pcs.
								

								

							

								

									AB5N-PA66HSW-BGE
211-00275
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									Ivory (IV)
							
							AB5N-PA66HSW-BGE
211-00275
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=9.5mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=9.5mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB6N-PA66-NA
211-00207
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB6N-PA66-NA
211-00207
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=9.5mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=9.5mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB6N-PA66W-BK
211-00208
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB6N-PA66W-BK
211-00208
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=10.5mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=10.5mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB7N-PA66-NA
211-00209
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB7N-PA66-NA
211-00209
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=10.5mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=10.5mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB7N-PA66W-BK
211-00210
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB7N-PA66W-BK
211-00210
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB8N-PA66-NA
211-00211
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB8N-PA66-NA
211-00211
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB8N-PA66W-BK
211-00212
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB8N-PA66W-BK
211-00212
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, natural, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, natural, 100pcs.
								

								

							

								

									AB9N-PA66-NA
211-00213
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Natural (NA)
							
							AB9N-PA66-NA
211-00213
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, black, 100pcs.
							

							

						

							
								P-Clamps H1P - H18P in different dimensions.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, black, 100pcs.
								

								

							

								

									AB9N-PA66W-BK
211-00214
								

								

										Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									Black (BK)
							
							AB9N-PA66W-BK
211-00214
					

							
				
				

						Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
					

						
			



		
					

							

							
								P-clamp closed, white, 100pcs.
							

							

						

							
								Mount for flat cables, PFC series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, white, 100pcs.
								

								

							

								

									PFC-PVC-WH
211-00216
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						100


					

						
								
									White (WH)
							
							PFC-PVC-WH
211-00216
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=4.7mm, Dmax=5.3mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=4.7mm, Dmax=5.3mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-2-PVC-WH
211-00217
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-2-PVC-WH
211-00217
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=7.7mm, Dmax=8.3mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=7.7mm, Dmax=8.3mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-4-PVC-WH
211-00219
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-4-PVC-WH
211-00219
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-5-PVC-WH
211-00220
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-5-PVC-WH
211-00220
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=9.7mm, Dmax=10.3mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=9.7mm, Dmax=10.3mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-6-PVC-WH
211-00221
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-6-PVC-WH
211-00221
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-3-PVC-WH
211-00218
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-3-PVC-WH
211-00218
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=12.2mm, Dmax=12.8mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=12.2mm, Dmax=12.8mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-7-PVC-WH
211-00222
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-7-PVC-WH
211-00222
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=13.7mm, Dmax=14.3mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=13.7mm, Dmax=14.3mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-8-PVC-WH
211-00223
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-8-PVC-WH
211-00223
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=15.7mm, Dmax=16.3mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=15.7mm, Dmax=16.3mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-9-PVC-WH
211-00224
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-9-PVC-WH
211-00224
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=17.2mm, Dmax=17.8mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=17.2mm, Dmax=17.8mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-10-PVC-WH
211-00225
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-10-PVC-WH
211-00225
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=18.7mm, Dmax=19.3mm, ⌀3.2 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=18.7mm, Dmax=19.3mm, ⌀3.2 mm, white, 50pcs.
								

								

							

								

									P-11-PVC-WH
211-00226
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-11-PVC-WH
211-00226
					

							
				
				

						
					

						
			



		
					

							

							
								P-clamp closed, Dmin=20.2mm, Dmax=28.8mm, ⌀4.8 mm, white, 50pcs.
							

							

						

							
								Plastic P-Clamps P-Series.
										
							

									
									Compare
								

							

						

							

								
									P-clamp closed, Dmin=20.2mm, Dmax=28.8mm, ⌀4.8 mm, white, 50pcs.
								

								

							

								

									P-12-PVC-WH
211-00227
								

								

										
									

								

									

											
											Compare
										

									

										

												

			
			
				
				Add to watchlist
				
			


		
	

								

							

						

					

						

				
					

						50


					

						
								
									White (WH)
							
							P-12-PVC-WH
211-00227
					

							
				
				

						
					

						
			



		

	












		

			

			

			

	



		

			Results for "211-60069 Ratchet P-Clamp" in Cable Ties and Fixings

		
HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

	

	





						

			




	

		

	

		

			
						YouTube 
					
				
						LinkedIn 
					
				
						Link Corporate Blog 
					
				

	






		

			
                
								문의하기
					
			
                
								법적고지
					
			
                
								저작권고지
					
			
                
								지침 및 책무
					
			
                
								개인정보 보호 정책
					
			
                
								뉴스레터
					
			
                
								사이트맵
					
			

	


	

	업데이트: 11/05/2026
	© HellermannTyton 2026

	

		

			© HellermannTyton 2026 (v4.306)
			
			|
			업데이트: 11/05/2026
			
             | 개인 정보 설정
          
			

	




		
	


    

    



		
			문의