Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
25/12/2025

Results for "hard line high frequency"

10,659 products found 추가 콘텐츠 1개
참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (5276)

Cable Ties Inside Serrated  (1508) Cable Ties Outside Serrated  (99) Cable Ties Without Serration  (42) Cable Ties, Releasable  (39) Cable Ties, Stainless Steel  (228) Cable Ties With Fixing Elements  (1597) Cable Tie Mounts  (368) Fixing Elements  (371) Clips, Clamps and Plugs  (1693)
Cable Ties and Fixings
Cable Ties and Fixings (5276)
Insulation

Insulation  (2687)

Heat Shrink Tubing  (1658) Heat Shrinkable Moulded Shapes  (520) Insulating tubes  (516)
Insulation
Insulation (2687)
Cable Protection Systems

Cable Protection Systems  (1506)

Non-Metallic Conduit Systems  (647) Metallic Conduit Systems  (112) Spiral-Reinforced Conduit Systems  (68) Conduit System Accessories  (31) Protective Tubing and Spiral Binding  (91) Expandable Braided Sleeves  (400) Open Woven Sleeves  (417) Edge Protection  (17) Grommets  (60) Wiring Ducts and Accessories  (80)
Cable Protection Systems
Cable Protection Systems (1506)
Electrical Installation

Electrical Installation  (171)

Downlight Covers  (4) Cable Rods  (3) Electrical Tapes  (87) Cast Resin Technology  (66) Gel Technology  (11)
Electrical Installation
Electrical Installation (171)
Identification Systems

Identification Systems  (888)

Wire and Cable Markers  (488) Control Panel Labelling  (159) Industrial Identification  (246) RFID tags and cable ties  (63) Security Labeling  (27) Hazardous Area Identification  (7) Printers and Software  (99)
Identification Systems
Identification Systems (888)
Application Tooling

Application Tooling  (134)

Automatic Cable Tying System  (27) Application Tooling for Cable Ties  (97) Application Tooling for Snappers  (3) Application Tooling for Heat Shrinkable Tubing  (1) Application Tooling for Non Shrinkable Tubing  (6)
Application Tooling
Application Tooling (134)
Safety Equipment

Safety Equipment  (3)

EasyDoor  (3)
Safety Equipment
Safety Equipment (3)
10,659 개의 제품을
모두 초기화
Cable tie inside serrated detectable, 203.2x4.6mm, ⌀6.0-50.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 203.2x4.6mm, ⌀6.0-50.0mm, blue, 100pcs.
MCTPP50R-PPMD-BU 111-01666
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP50R-PPMD-BU 111-01666
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀16.0-100.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀16.0-100.0mm, blue, 100pcs.
MCTPP120R-PPMD-BU 111-01668
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP120R-PPMD-BU 111-01668
Cable tie inside serrated detectable, 100.0x2.4mm, ⌀1.5-22.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 100.0x2.4mm, ⌀1.5-22.0mm, blue, 100pcs.
MCTPP18R-PPMD-BU 111-01664
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP18R-PPMD-BU 111-01664
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.0 mm/6.35 mm (hexagonal), ⌀6.35 mm, #1/4" (M6) Screw, grey, 500pcs.
Separates bundles from wear and chafing, providing additional longevity.
Compare
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.0 mm/6.35 mm (hexagonal), ⌀6.35 mm, #1/4" (M6) Screw, grey, 500pcs.
S2CM25-PA66HIRHS-GY 151-29400
Compare
Add to watchlist
500 pcs.
Grey (GY) S2CM25-PA66HIRHS-GY 151-29400
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, black, 100pcs.
T120I-PA66-BK 111-12210
Compare
Add to watchlist
100 pcs.
Black (BK) T120I-PA66-BK 111-12210
Cable tie inside serrated, 203.2x2.5mm, ⌀1.5-55.0mm, white, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 203.2x2.5mm, ⌀1.5-55.0mm, white, 1000pcs.
T18L-PA66V0-WH 111-02043
Compare
Add to watchlist
1000 pcs.
White (WH) T18L-PA66V0-WH 111-02043
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
T18R-PA66W-BK 111-01914
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66W-BK 111-01914
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
T30R-PA46-NA 114-03379
Compare
Add to watchlist
100 pcs.
Natural (NA) T30R-PA46-NA 114-03379
Connector clip for hole (oval), EWCAP-005-11, natural, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Connector clip for hole (oval), EWCAP-005-11, natural, 5000pcs.
CCOVAL-PA66HIRHS-NA 151-01259
Compare
Add to watchlist
5000 pcs.
Natural (NA) CCOVAL-PA66HIRHS-NA 151-01259
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Compare
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
CCOVAL3-PA66HIRHSUV-BK 151-01244
Compare
Add to watchlist
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Compare
Connector clip for edge, EWCAP-005-11, black, 500pcs.
EC43-PA66HIRHS-BK 151-00430
Compare
Add to watchlist
500 pcs.
Black (BK) EC43-PA66HIRHS-BK 151-00430
Bundling clip for stud, L=55.0mm, SO=30.0mm, black, 1000pcs.
Stud mount bundling clips are fastened to a tape bar using tape or cable ties.
Compare
Bundling clip for stud, L=55.0mm, SO=30.0mm, black, 1000pcs.
BC30-PA66HIRHS-BK 151-00016
Compare
Add to watchlist
1000 pcs.
Black (BK) BC30-PA66HIRHS-BK 151-00016
Bundling clip for hole (oval), L=58.0mm, natural, 8000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Bundling clip for hole (oval), L=58.0mm, natural, 8000pcs.
BCFTOVAL-PA66HIRHS-NA 151-01239
Compare
Add to watchlist
8000 pcs.
Natural (NA) BCFTOVAL-PA66HIRHS-NA 151-01239
Bundling clip for hole (oval), L=38.7mm, natural, 10000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Bundling clip for hole (oval), L=38.7mm, natural, 10000pcs.
BCFTOVAL2-PA66HIRHS-NA 151-01240
Compare
Add to watchlist
10000 pcs.
Natural (NA) BCFTOVAL2-PA66HIRHS-NA 151-01240
Bundling clip for hole (round), L=37.0mm, black, 14000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Compare
Bundling clip for hole (round), L=37.0mm, black, 14000pcs.
TC4FT6LG-PA66HIRHS-BK 151-00942
Compare
Add to watchlist
14000 pcs.
Black (BK) TC4FT6LG-PA66HIRHS-BK 151-00942
Bundling clip, L=39.0mm, black, 500pcs.
Compare
Bundling clip, L=39.0mm, black, 500pcs.
ATSBCFT6LG-PA66HIRHS-BK 102-67066
Compare
Add to watchlist
500 pcs.
Black (BK) ATSBCFT6LG-PA66HIRHS-BK 102-67066
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Compare
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA46-NA 114-04979
Compare
Add to watchlist
100 pcs.
Natural (NA) T50R-PA46-NA 114-04979
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Compare
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA46-NA 111-00725
Compare
Add to watchlist
100 pcs.
Natural (NA) T50R-PA46-NA 111-00725
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Grommet strip, T=2.1 - 3.3mm, W=5.7mm, W2=3.5mm, H=4.3mm, H2=2.7mm, -60 °C to +95 °C, natural, 25m
Flexiform - G51N - PA6 Grommet edging.
Compare
Grommet strip, T=2.1 - 3.3mm, W=5.7mm, W2=3.5mm, H=4.3mm, H2=2.7mm, -60 °C to +95 °C, natural, 25m
G51NC-PA6-NA 251-21309
Compare
Add to watchlist
1 pcs.
Natural (NA) G51NC-PA6-NA 251-21309
Braided sleeving, abrasion resistant, nom⌀25mm, ⌀18-28mm, black, 50m
HEGPA66 - Extreme abrasion protection sleeve.
Compare
Braided sleeving, abrasion resistant, nom⌀25mm, ⌀18-28mm, black, 50m
HEGPA6625-PA66-BK 170-42500
Compare
Add to watchlist
50 metre
Black (BK) HEGPA6625-PA66-BK 170-42500
Braided sleeving, abrasion resistant, nom⌀40mm, ⌀30-44mm, black, 50m
HEGPA66 - Extreme abrasion protection sleeve.
Compare
Braided sleeving, abrasion resistant, nom⌀40mm, ⌀30-44mm, black, 50m
HEGPA6640-PA66-BK 170-44000
Compare
Add to watchlist
50 metre
Black (BK) HEGPA6640-PA66-BK 170-44000
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EdgeClip cable and tube clips are suitable for the low-vibration routing of cables and tubes with larger bundle diameters.
Compare
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EC27-PA66HIRHS-BK 151-00161
Compare
Add to watchlist
500 pcs.
Black (BK) EC27-PA66HIRHS-BK 151-00161
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Compare
Cable clip for hole (round), ⌀4.8 mm
C1-PA6HIR-BK 201-10010
Compare
Add to watchlist
100 pcs.
Black (BK) C1-PA6HIR-BK 201-10010
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
Klam-Klips KK1 - 4.
Compare
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Natural (NA) H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Natural (NA) H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
250 pcs.
Natural (NA) H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, ball bearing lock, 362x4.6mm, ⌀12-102mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 362x4.6mm, ⌀12-102mm, metal, 100pcs.
MBT14SS-SS304-ML 111-01939
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT14SS-SS304-ML 111-01939
Stainless steel cable tie, ball bearing lock, 838.0x12.3mm, ⌀12.0-254.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 838.0x12.3mm, ⌀12.0-254.0mm, metal, 50pcs.
MBT33XH-SS316L-ML 111-95339
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33XH-SS316L-ML 111-95339
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
Manual tensioning tool EVO9i.
Compare
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
EVO9i-MET/PL-BU/GY 110-88004
Compare
Add to watchlist
1 pc.
Blue (BU), Grey (GY) EVO9i-MET/PL-BU/GY 110-88004
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
Manual tensioning tool EVO 9i.
Compare
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
EVO9iSP-MET/PL-BU/GY 110-88005
Compare
Add to watchlist
1 pc.
Blue (BU), Grey (GY) EVO9iSP-MET/PL-BU/GY 110-88005
Cable tag, continuous, thermal transfer print, 50.0x5.5mm, white, reel=500pcs.
Tiptag 5 ideal for small cables.
Compare
Cable tag, continuous, thermal transfer print, 50.0x5.5mm, white, reel=500pcs.
TIPTAG5X50WH-2-PO-WH 556-81500
Compare
Add to watchlist
500 pcs.
White (WH) TIPTAG5X50WH-2-PO-WH 556-81500
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-13/4-PO-X-BK 321-20131
Compare
Add to watchlist
46 m
Black (BK) HA47-13/4-PO-X-BK 321-20131
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-13/4-PO-X-BK 321-20132
Compare
Add to watchlist
90 m
Black (BK) HA47-13/4-PO-X-BK 321-20132
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-19/6-PO-X-BK 321-20181
Compare
Add to watchlist
150 m
Black (BK) HA47-19/6-PO-X-BK 321-20181
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-19/6-PO-X-BK 321-20182
Compare
Add to watchlist
150 m
Black (BK) HA47-19/6-PO-X-BK 321-20182
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-33/8-PO-X-BK 321-20281
Compare
Add to watchlist
100 m
Black (BK) HA47-33/8-PO-X-BK 321-20281
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-33/8-PO-X-BK 321-20282
Compare
Add to watchlist
50 m
Black (BK) HA47-33/8-PO-X-BK 321-20282
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-51/16-PO-X-BK 321-20511
Compare
Add to watchlist
1.2 m
Black (BK) HA47-51/16-PO-X-BK 321-20511
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-85/25-PO-X-BK 321-20851
Compare
Add to watchlist
1.2 m
Black (BK) HA47-85/25-PO-X-BK 321-20851
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-85/25-PO-X-BK 321-20852
Compare
Add to watchlist
150 m
Black (BK) HA47-85/25-PO-X-BK 321-20852
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-105/30-PO-X-BK 321-20901
Compare
Add to watchlist
1.2 m
Black (BK) HA47-105/30-PO-X-BK 321-20901
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-130/36-PO-X-BK 321-21301
Compare
Add to watchlist
1.5 m
Black (BK) HA47-130/36-PO-X-BK 321-21301
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-130/36-PO-X-BK 321-21302
Compare
Add to watchlist
1.2 m
Black (BK) HA47-130/36-PO-X-BK 321-21302
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-160/50-1.22m-PO-X-BK 321-21601
Compare
Add to watchlist
1 m
Black (BK) HA47-160/50-1.22m-PO-X-BK 321-21601
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 1 m lengths
HA47-180/50-PO-X-BK 321-21851
Compare
Add to watchlist
5 m
Black (BK) HA47-180/50-PO-X-BK 321-21851
Heat shrinkable tubing up to 3.5:1 - 920 mm lengths
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Compare
Heat shrinkable tubing up to 3.5:1 - 920 mm lengths
HA47-265/75-PO-X-BK 321-22650
Compare
Add to watchlist
5 m
Black (BK) HA47-265/75-PO-X-BK 321-22650
Heat Shrinkable Tubing 3:1 Thick Wall Adhesive Lined length 1m 9/3 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 3:1 Thick Wall Adhesive Lined length 1m 9/3 black GL-certificated
HA40-9/3-PO-X-BK 321-00100
Compare
Add to watchlist
10 pcs.
Black (BK) HA40-9/3-PO-X-BK 321-00100
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 13/4 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 13/4 black GL-certificated
HA40-13/4-PO-X-BK 321-00101
Compare
Add to watchlist
10 pcs.
Black (BK) HA40-13/4-PO-X-BK 321-00101
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 22/6 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 22/6 black GL-certificated
HA40-22/6-PO-X-BK 321-00102
Compare
Add to watchlist
5 pcs.
Black (BK) HA40-22/6-PO-X-BK 321-00102
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 33/8 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 33/8 black GL-certificated
HA40-33/8-PO-X-BK 321-00103
Compare
Add to watchlist
3 metre
Black (BK) HA40-33/8-PO-X-BK 321-00103
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 40/12 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 40/12 black GL-certificated
HA40-40/12-PO-X-BK 321-00104
Compare
Add to watchlist
2 pcs.
Black (BK) HA40-40/12-PO-X-BK 321-00104
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 55/16 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 55/16 black GL-certificated
HA40-55/16-PO-X-BK 321-00105
Compare
Add to watchlist
2 metre
Black (BK) HA40-55/16-PO-X-BK 321-00105
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 75/22 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 75/22 black GL-certificated
HA40-75/22-PO-X-BK 321-00106
Compare
Add to watchlist
2 pcs.
Black (BK) HA40-75/22-PO-X-BK 321-00106
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 92/25 black GL-certificated
HA40 thick wall, adhesive lined and flame retarded tubing for shipbuilding applications.
Compare
Heat Shrinkable Tubing 4:1 Thick Wall Adhesive Lined length 1m 92/25 black GL-certificated
HA40-92/25-PO-X-BK 321-00107
Compare
Add to watchlist
2 pcs.
Black (BK) HA40-92/25-PO-X-BK 321-00107
Heat shrinkable tubing 4:1 (4/1 mm), adhesive lined, 1.2 m, thin wall, black
TA30 / TA40.
Compare
Heat shrinkable tubing 4:1 (4/1 mm), adhesive lined, 1.2 m, thin wall, black
TA40 4/1-PO-X-BK 317-40400
Compare
Add to watchlist
1.2 m
Black (BK) TA40 4/1-PO-X-BK 317-40400
Heat shrinkable tubing 4:1 (8/2 mm), adhesive lined, 1.2 m, thin wall, black
TA30 / TA40.
Compare
Heat shrinkable tubing 4:1 (8/2 mm), adhesive lined, 1.2 m, thin wall, black
TA40 8/2-PO-X-BK 317-40800
Compare
Add to watchlist
1.2 m
Black (BK) TA40 8/2-PO-X-BK 317-40800
Heat shrinkable tubing 4:1 (12/3 mm), adhesive lined, 1.2 m, thin wall, black
TA30 / TA40.
Compare
Heat shrinkable tubing 4:1 (12/3 mm), adhesive lined, 1.2 m, thin wall, black
TA40 12/3-PO-X-BK 317-41200
Compare
Add to watchlist
1.2 m
Black (BK) TA40 12/3-PO-X-BK 317-41200
Heat shrinkable tubing 4:1 (24/6 mm), adhesive lined, 1.2 m, thin wall, black
TA30 / TA40.
Compare
Heat shrinkable tubing 4:1 (24/6 mm), adhesive lined, 1.2 m, thin wall, black
TA40 24/6-PO-X-BK 317-42400
Compare
Add to watchlist
1.2 m
Black (BK) TA40 24/6-PO-X-BK 317-42400
Heat shrinkable tubing 4:1 (16/4 mm), adhesive lined, 1.2 m, thin wall, black
TA30 / TA40.
Compare
Heat shrinkable tubing 4:1 (16/4 mm), adhesive lined, 1.2 m, thin wall, black
TA40 16/4-PO-X-BK 317-41800
Compare
Add to watchlist
1.2 m
Black (BK) TA40 16/4-PO-X-BK 317-41800
Heat shrinkable tubing 4:1 (32/8 mm), adhesive lined, 1.2 m, thin wall, black
TA30 / TA40.
Compare
Heat shrinkable tubing 4:1 (32/8 mm), adhesive lined, 1.2 m, thin wall, black
TA40 32/8-PO-X-BK 317-43200
Compare
Add to watchlist
1.2 m
Black (BK) TA40 32/8-PO-X-BK 317-43200
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 4/1 black
TA32 and TA42 are UL224 listed adhesive lned tubing. Available in 3:1 and 4:1 ahrink ratio.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 4/1 black
TA42-4/1-PO-X-BK 318-40400
Compare
Add to watchlist
50 pcs.
Black (BK) TA42-4/1-PO-X-BK 318-40400
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 16/4 black
TA32 and TA42 are UL224 listed adhesive lned tubing. Available in 3:1 and 4:1 ahrink ratio.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 16/4 black
TA42-16/4-PO-X-BK 318-41600
Compare
Add to watchlist
25 pcs.
Black (BK) TA42-16/4-PO-X-BK 318-41600
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 24/6 black
TA32 and TA42 are UL224 listed adhesive lned tubing. Available in 3:1 and 4:1 ahrink ratio.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 24/6 black
TA42-24/6-PO-X-BK 318-42400
Compare
Add to watchlist
15 pcs.
Black (BK) TA42-24/6-PO-X-BK 318-42400
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 32/8 black
TA32 and TA42 are UL224 listed adhesive lned tubing. Available in 3:1 and 4:1 ahrink ratio.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 32/8 black
TA42-32/8-PO-X-BK 318-43200
Compare
Add to watchlist
5 pcs.
Black (BK) TA42-32/8-PO-X-BK 318-43200
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 52/13 black
TA32 and TA42 are UL224 listed adhesive lned tubing. Available in 3:1 and 4:1 ahrink ratio.
Compare
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 4:1 L=1,2m 52/13 black
TA42-52/13-PO-X-BK 318-45200
Compare
Add to watchlist
5 pcs.
Black (BK) TA42-52/13-PO-X-BK 318-45200
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S for M8 threaded studs.
Compare
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S-PA46-GY 131-60058
Compare
Add to watchlist
500 pcs.
Grey (GY) SBR8S-PA46-GY 131-60058
Heat shrinkable tubing 4:1 (7,6/1,7 mm), adhesive lined, black, 1.2 m
Heat shrink tubing SA47-HT for 150 °C application.
Compare
Heat shrinkable tubing 4:1 (7,6/1,7 mm), adhesive lined, black, 1.2 m
SA47-HT 7.6/1.7-PO-X-BK 301-10010
Compare
Add to watchlist
25 pcs.
Black (BK) SA47-HT 7.6/1.7-PO-X-BK 301-10010
Heat shrinkable tubing 4:1 (9/2,3 mm), adhesive lined, black, 1.2 m
Heat shrink tubing SA47-HT for 150 °C application.
Compare
Heat shrinkable tubing 4:1 (9/2,3 mm), adhesive lined, black, 1.2 m
SA47-HT 9.0/2.3-PO-X-BK 301-10011
Compare
Add to watchlist
25 pcs.
Black (BK) SA47-HT 9.0/2.3-PO-X-BK 301-10011
Heat shrinkable tubing 4:1 (11,6/2,5 mm), adhesive lined, black, 1.2 m
Heat shrink tubing SA47-HT for 150 °C application.
Compare
Heat shrinkable tubing 4:1 (11,6/2,5 mm), adhesive lined, black, 1.2 m
SA47-HT 11.6/2.5-PO-X-BK 301-10012
Compare
Add to watchlist
25 pcs.
Black (BK) SA47-HT 11.6/2.5-PO-X-BK 301-10012
Heat shrinkable tubing 4:1 (32/8 mm), adhesive lined, black, 1.2 m
Heat shrink tubing SA47-HT for 150 °C application.
Compare
Heat shrinkable tubing 4:1 (32/8 mm), adhesive lined, black, 1.2 m
SA47-HT 32/8-PO-X-BK 301-10014
Compare
Add to watchlist
5 pcs.
Black (BK) SA47-HT 32/8-PO-X-BK 301-10014
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 6.63kg, blue
The automatic bundling tool ATS flex with different jaw sizes.
Compare
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 6.63kg, blue
ATS_flex_second_hand-MET-BU 102-60900
Compare
Add to watchlist
1 pcs.
Blue (BU) ATS_flex_second_hand-MET-BU 102-60900
Heat Shrinkable Tubing 2:1 (9.5/4.8) black
Compare
Heat Shrinkable Tubing 2:1 (9.5/4.8) black
PST-H-9.5/4.8-POA-BK 342-20950
Compare
Add to watchlist
150 metre
Black (BK) PST-H-9.5/4.8-POA-BK 342-20950
Heat Shrinkable Tubing 2:1 (19/9.5) black
Compare
Heat Shrinkable Tubing 2:1 (19/9.5) black
PST-H-19.0/9.5-POA-BK 342-21900
Compare
Add to watchlist
50 metre
Black (BK) PST-H-19.0/9.5-POA-BK 342-21900
Heat Shrinkable Tubing 2:1 (12.7/6.4) black
Compare
Heat Shrinkable Tubing 2:1 (12.7/6.4) black
PST-H-12.7/6.4-POA-BK 342-21270
Compare
Add to watchlist
100 metre
Black (BK) PST-H-12.7/6.4-POA-BK 342-21270
Heat Shrinkable Tubing 2:1 (25.4/12.7) black
Compare
Heat Shrinkable Tubing 2:1 (25.4/12.7) black
PST-H-25.4/12.7-POA-BK 342-22540
Compare
Add to watchlist
50 metre
Black (BK) PST-H-25.4/12.7-POA-BK 342-22540
Heat shrinkable tubing 2:1 (6.6/2.4 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Compare
Heat shrinkable tubing 2:1 (6.6/2.4 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20-6.6/2.4-PO-X-BK 300-73160
Compare
Add to watchlist
300 metre
Black (BK) TCN20-6.6/2.4-PO-X-BK 300-73160
Heat shrinkable tubing 2:1 (12.7/4.8 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Compare
Heat shrinkable tubing 2:1 (12.7/4.8 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20-12.7/4.8-PO-X-BK 300-73180
Compare
Add to watchlist
100 metre
Black (BK) TCN20-12.7/4.8-PO-X-BK 300-73180
Heat shrinkable tubing 2:1 (19.0/6.4 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Compare
Heat shrinkable tubing 2:1 (19.0/6.4 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20-19.0/6.4-PO-X-BK 300-73190
Compare
Add to watchlist
60 metre
Black (BK) TCN20-19.0/6.4-PO-X-BK 300-73190
Heat shrinkable tubing 2:1 (38.0/12.7 mm), self extinguishing and overexpanded, black, 30 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Compare
Heat shrinkable tubing 2:1 (38.0/12.7 mm), self extinguishing and overexpanded, black, 30 m reel
TCN20-38.0/12.7-PO-X-BK 300-73210
Compare
Add to watchlist
30 metre
Black (BK) TCN20-38.0/12.7-PO-X-BK 300-73210
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 3,2/1,6
Thin wall TE28 tubing.
Compare
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 3,2/1,6
TE28 3.2/1.6-POA-BK 342-30010
Compare
Add to watchlist
150 metre
Black (BK) TE28 3.2/1.6-POA-BK 342-30010
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 4,8/2,4
Thin wall TE28 tubing.
Compare
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 4,8/2,4
TE28 4.8/2.4-POA-BK 342-30020
Compare
Add to watchlist
60 metre
Black (BK) TE28 4.8/2.4-POA-BK 342-30020
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 9,5/4,8
Thin wall TE28 tubing.
Compare
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 9,5/4,8
TE28 9.5/4.8-POA-BK 342-30040
Compare
Add to watchlist
60 metre
Black (BK) TE28 9.5/4.8-POA-BK 342-30040
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 12,7/6,4
Thin wall TE28 tubing.
Compare
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 12,7/6,4
TE28 12.7/6.4-POA-BK 342-30050
Compare
Add to watchlist
60 metre
Black (BK) TE28 12.7/6.4-POA-BK 342-30050
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (52/15 mm), adhesive lined, black
HellermannTyton RMS - Wrap-around heat shrink cable repair sleeve.
Compare
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (52/15 mm), adhesive lined, black
RMS 52-15-PO-X-BK 450-20012
Compare
Add to watchlist
1 pcs.
Black (BK) RMS 52-15-PO-X-BK 450-20012
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (76/22 mm), adhesive lined, black
RMS wrap-around sleeves for rapid and secure cable repair.
Compare
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (76/22 mm), adhesive lined, black
RMS 76-22-PO-X-BK 450-20022
Compare
Add to watchlist
1 pcs.
Black (BK) RMS 76-22-PO-X-BK 450-20022
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (139/38 mm), adhesive lined, black
HellermannTyton RMS - Wrap-around heat shrink cable repair sleeve.
Compare
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (139/38 mm), adhesive lined, black
RMS 139-38-PO-X-BK 450-20041
Compare
Add to watchlist
1 pcs.
Black (BK) RMS 139-38-PO-X-BK 450-20041
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
Viton®-E for flexibility and protection against aggressive chemicals.
Compare
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
VITON®-E-3.2/1.6-FPMX-BK 330-00320
Compare
Add to watchlist
50 metre
Black (BK) VITON®-E-3.2/1.6-FPMX-BK 330-00320
Fluoroelastomer Heat Shrinkable Tubing 2:1 4.8/2.4 black
Viton®-E for flexibility and protection against aggressive chemicals.
Compare
Fluoroelastomer Heat Shrinkable Tubing 2:1 4.8/2.4 black
VITON®-E-4.8/2.4-FPMX-BK 330-00480
Compare
Add to watchlist
50 metre
Black (BK) VITON®-E-4.8/2.4-FPMX-BK 330-00480
YouTube  LinkedIn  Link Corporate Blog 
문의하기 법적고지 저작권고지 지침 및 책무 개인정보 보호 정책 뉴스레터 사이트맵
업데이트: 21/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | 업데이트: 21/12/2025 | 개인 정보 설정
문의