Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
12/10/2025

Results for "hard line high frequency"

10,678 products found 추가 콘텐츠 1개
참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (5295)

Cable Ties Inside Serrated  (1509) Cable Ties Outside Serrated  (99) Cable Ties Without Serration  (42) Cable Ties, Releasable  (39) Cable Ties, Stainless Steel  (228) Cable Ties With Fixing Elements  (1597) Cable Tie Mounts  (374) Fixing Elements  (372) Clips, Clamps and Plugs  (1705)
Cable Ties and Fixings
Cable Ties and Fixings (5295)
Insulation

Insulation  (2687)

Heat Shrink Tubing  (1658) Heat Shrinkable Moulded Shapes  (520) Insulating tubes  (516)
Insulation
Insulation (2687)
Cable Protection Systems

Cable Protection Systems  (1506)

Non-Metallic Conduit Systems  (647) Metallic Conduit Systems  (112) Spiral-Reinforced Conduit Systems  (68) Conduit System Accessories  (31) Protective Tubing and Spiral Binding  (91) Expandable Braided Sleeves  (400) Open Woven Sleeves  (417) Edge Protection  (17) Grommets  (60) Wiring Ducts and Accessories  (80)
Cable Protection Systems
Cable Protection Systems (1506)
Electrical Installation

Electrical Installation  (171)

Downlight Covers  (4) Cable Rods  (3) Electrical Tapes  (87) Cast Resin Technology  (66) Gel Technology  (11)
Electrical Installation
Electrical Installation (171)
Identification Systems

Identification Systems  (888)

Wire and Cable Markers  (488) Control Panel Labelling  (159) Industrial Identification  (246) RFID tags and cable ties  (63) Security Labeling  (27) Hazardous Area Identification  (7) Printers and Software  (99)
Identification Systems
Identification Systems (888)
Application Tooling

Application Tooling  (134)

Automatic Cable Tying System  (27) Application Tooling for Cable Ties  (97) Application Tooling for Snappers  (3) Application Tooling for Heat Shrinkable Tubing  (1) Application Tooling for Non Shrinkable Tubing  (6)
Application Tooling
Application Tooling (134)
Safety Equipment

Safety Equipment  (3)

EasyDoor  (3)
Safety Equipment
Safety Equipment (3)
10,678 개의 제품을
모두 초기화
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.
T50SVC5 rotates in any direction.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.
T50SVCOC31-39-PA66HS/PA66HIRHS-BK 156-00273
Compare
Add to watchlist
250 pcs.
Black (BK) T50SVCOC31-39-PA66HS/PA66HIRHS-BK 156-00273
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-01340
Compare
Add to watchlist
500
Black (BK) T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-01340
Fixing tie for stud, inside serrated, ⌀4.0-19.0mm, black, 500pcs.
Compare
Fixing tie for stud, inside serrated, ⌀4.0-19.0mm, black, 500pcs.
T50RDHSBS5-PA66HS/PA66HIRHS-BK 156-00612
Compare
Add to watchlist
500 pcs.
Black (BK) T50RDHSBS5-PA66HS/PA66HIRHS-BK 156-00612
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSBS5-PA66HS/PA66HIRHS-BK 156-00686
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSSBS5-PA66HS/PA66HIRHS-BK 156-00686
Fixing tie for stud, inside serrated, ⌀2.0-81.0mm, black, 500pcs.
SB5
Compare
Fixing tie for stud, inside serrated, ⌀2.0-81.0mm, black, 500pcs.
T80ISB5-PA66HIRHS/PA66HS-BK 156-01403
Compare
Add to watchlist
500 pcs.
Black (BK) T80ISB5-PA66HIRHS/PA66HS-BK 156-01403
Fixing tie for stud, inside serrated, ⌀2.0-81.0mm, black, 500pcs.
SB5
Compare
Fixing tie for stud, inside serrated, ⌀2.0-81.0mm, black, 500pcs.
T80ISB5-PA66HS/PA66HIRHS-BK 156-01020
Compare
Add to watchlist
500 pcs.
Black (BK) T80ISB5-PA66HS/PA66HIRHS-BK 156-01020
Fixing tie for stud, outside serrated, ⌀1.5-45.0mm, black, 500pcs.
Compare
Fixing tie for stud, outside serrated, ⌀1.5-45.0mm, black, 500pcs.
T50ROSSB5CSD-PA66HS/PA66HIRHS-BK 156-00687
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSSB5CSD-PA66HS/PA66HIRHS-BK 156-00687
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 500pcs.
Compare
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 500pcs.
T50RSB5CSD-PA66HS/PA66HIRHS-BK 156-00754
Compare
Add to watchlist
500 pcs.
Black (BK) T50RSB5CSD-PA66HS/PA66HIRHS-BK 156-00754
Fixing tie for stud, outside serrated, ⌀3.0-45.0mm, black, 500pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-45.0mm, black, 500pcs.
T50ROSGBS8CB-PA66HS/PA66HIRHS-BK 156-00252
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSGBS8CB-PA66HS/PA66HIRHS-BK 156-00252
Fixing tie for stud, inside serrated, ⌀20.0-40.0mm, black, 250pcs.
Compare
Fixing tie for stud, inside serrated, ⌀20.0-40.0mm, black, 250pcs.
T50ISBS520-40-PA66HS/PA66HIRHS-BK 156-00911
Compare
Add to watchlist
250 pcs.
Black (BK) T50ISBS520-40-PA66HS/PA66HIRHS-BK 156-00911
Fixing tie for stud, inside serrated, ⌀45.0mm, black, 500pcs.
Compare
Fixing tie for stud, inside serrated, ⌀45.0mm, black, 500pcs.
T50RSBH5-10-PA66HS/PA66HIRHS-BK 156-00536
Compare
Add to watchlist
500 pcs.
Black (BK) T50RSBH5-10-PA66HS/PA66HIRHS-BK 156-00536
Fixing tie for stud, inside serrated, ⌀45.0mm, natural/black, 500pcs.
Compare
Fixing tie for stud, inside serrated, ⌀45.0mm, natural/black, 500pcs.
T50RSBH5-10-PA66HS/PA66HIRHS-NA/BK 156-00758
Compare
Add to watchlist
500 pcs.
Natural (NA), Black (BK) T50RSBH5-10-PA66HS/PA66HIRHS-NA/BK 156-00758
Fixing tie for stud, ⌀1.5-45.0mm, black, 250pcs.
Compare
Fixing tie for stud, ⌀1.5-45.0mm, black, 250pcs.
T50RDSBS5-6-PA66HIRHSUV-BK 156-03124
Compare
Add to watchlist
250 pcs.
Black (BK) T50RDSBS5-6-PA66HIRHSUV-BK 156-03124
Fixing tie for stud, ⌀4.0-50.0mm, black, 100pcs.
Versatile two-piece design allows cable routing above, perpendicular or parallel to stud.
Compare
Fixing tie for stud, ⌀4.0-50.0mm, black, 100pcs.
T50R0SBS5-6U-PA66HS/PA66HIRHS-BK 156-02586
Compare
Add to watchlist
100
Black (BK) T50R0SBS5-6U-PA66HS/PA66HIRHS-BK 156-02586
Fixing tie for cable bundles, inside serrated, ⌀10.0-105.0mm, black, 250pcs.
Compare
Fixing tie for cable bundles, inside serrated, ⌀10.0-105.0mm, black, 250pcs.
T120RCOUPLER-PA66HS/PA66HIRHS-BK 156-01008
Compare
Add to watchlist
250 pcs.
Black (BK) T120RCOUPLER-PA66HS/PA66HIRHS-BK 156-01008
Fixing tie for cable bundles, inside serrated, ⌀10.0-100.0mm, black, 1000pcs.
T50RCOUPLER for parallel routing.
Compare
Fixing tie for cable bundles, inside serrated, ⌀10.0-100.0mm, black, 1000pcs.
CSCX120RX2-PA66HS/PA66HIRHS-BK 156-02795
Compare
Add to watchlist
1000 pcs.
Black (BK) CSCX120RX2-PA66HS/PA66HIRHS-BK 156-02795
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, grey, 100pcs.
Compare
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, grey, 100pcs.
T120RHDM6-PA46-GY 156-00407
Compare
Add to watchlist
100 pcs.
Grey (GY) T120RHDM6-PA46-GY 156-00407
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, grey, 100pcs.
Compare
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, grey, 100pcs.
T120RHDM8-PA46-GY 156-00409
Compare
Add to watchlist
100 pcs.
Grey (GY) T120RHDM8-PA46-GY 156-00409
Fixing tie for screw fixation, inside serrated, ⌀5.0-55.0mm, grey, 500pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-55.0mm, grey, 500pcs.
T120SHDM8-PA46-GY 156-00429
Compare
Add to watchlist
100 pcs.
Grey (GY) T120SHDM8-PA46-GY 156-00429
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 500pcs.
2-piece fixing tie for blind holes.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 500pcs.
T50RDHA8.4x20-PA46-GY 156-01155
Compare
Add to watchlist
500 pcs.
Grey (GY) T50RDHA8.4x20-PA46-GY 156-01155
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50REC5A-PA66W-BK 156-02580
Compare
Add to watchlist
500 pcs.
Black (BK) T50REC5A-PA66W-BK 156-02580
Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.
T30REC5A-PA66/PA66HS-BK 156-00495
Compare
Add to watchlist
500 pcs.
Black (BK) T30REC5A-PA66/PA66HS-BK 156-00495
Fixing tie for edge, outside serrated, ⌀1-45.0mm, grey, 500pcs.
T50ROSEC23 - the cable bundle runs parallel with the edge.
Compare
Fixing tie for edge, outside serrated, ⌀1-45.0mm, grey, 500pcs.
T50ROSEC23-PA46-GY 156-01115
Compare
Add to watchlist
500 pcs.
Grey (GY) T50ROSEC23-PA46-GY 156-01115
Fixing tie for edge, ⌀4.0-50.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Compare
Fixing tie for edge, ⌀4.0-50.0mm, black, 500pcs.
T50ROSEC2.5B-PA66HS/PA66HIRHS-BK 156-01402
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC2.5B-PA66HS/PA66HIRHS-BK 156-01402
Fixing tie for edge, ⌀50.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Compare
Fixing tie for edge, ⌀50.0mm, black, 500pcs.
T50ROSCBTO-PA66HS/PA66HIRHS-BK 156-02704
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSCBTO-PA66HS/PA66HIRHS-BK 156-02704
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 250pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 250pcs.
T50RFT8-PA66HS/PA66HIRHS-BK 156-00619
Compare
Add to watchlist
250 pcs.
Black (BK) T50RFT8-PA66HS/PA66HIRHS-BK 156-00619
Fixing tie for hole (round), inside serrated, ⌀4.0-81.0mm, black, 500pcs.
Friction tab inside the fir tree allows the tie to sit in mount without falling out prior to installation.
Compare
Fixing tie for hole (round), inside serrated, ⌀4.0-81.0mm, black, 500pcs.
T50IFT8-PA66HIRHS-BK 156-00060
Compare
Add to watchlist
500 pcs.
Black (BK) T50IFT8-PA66HIRHS-BK 156-00060
Fixing tie for hole (round), inside serrated, ⌀1.0-40.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀1.0-40.0mm, black, 500pcs.
T40RFT8GSD-PA66HS/PA66HIRHS-BK 156-00104
Compare
Add to watchlist
500 pcs.
Black (BK) T40RFT8GSD-PA66HS/PA66HIRHS-BK 156-00104
Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35.0mm, grey, 100pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35.0mm, grey, 100pcs.
T30R-PA46-GY 111-00968
Compare
Add to watchlist
100 pcs.
Grey (GY) T30R-PA46-GY 111-00968
Cable tie inside serrated, 150x3.6mm, ⌀3.0-35.0mm, white, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.6mm, ⌀3.0-35.0mm, white, 100pcs.
T30R-PA66V0-WH 111-93019
Compare
Add to watchlist
100 pcs.
White (WH) T30R-PA66V0-WH 111-93019
Cable tie inside serrated, 148.0x3.6mm, ⌀1.5-35.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 148.0x3.6mm, ⌀1.5-35.0mm, black, 100pcs.
T30R-PA66W-BK 112-03060
Compare
Add to watchlist
100 pcs.
Black (BK) T30R-PA66W-BK 112-03060
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
T30R-PA66W-BK 111-01974
Compare
Add to watchlist
100 pcs.
Black (BK) T30R-PA66W-BK 111-01974
Cable tie inside serrated, 390.0x4.8mm, ⌀1.5-110.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 390.0x4.8mm, ⌀1.5-110.0mm, black, 100pcs.
T50L-PA66W-BK 112-05460
Compare
Add to watchlist
100 pcs.
Black (BK) T50L-PA66W-BK 112-05460
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.
T50L-PA66W-BK 111-05440
Compare
Add to watchlist
100 pcs.
Black (BK) T50L-PA66W-BK 111-05440
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA46-BK 111-00969
Compare
Add to watchlist
100 pcs.
Black (BK) T50R-PA46-BK 111-00969
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
T50R-PA66W-BK 111-04913
Compare
Add to watchlist
1000 bag
Black (BK) T50R-PA66W-BK 111-04913
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66W-BK 111-01964
Compare
Add to watchlist
100 pcs.
Black (BK) T50R-PA66W-BK 111-01964
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Compare
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Halter SFT6.5-PA66HIRHS-BK 133-00067
Compare
Add to watchlist
1000 pcs.
Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067
Bundling clip, L=39.0mm, black, 500pcs.
Compare
Bundling clip, L=39.0mm, black, 500pcs.
ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Compare
Add to watchlist
500 pcs.
Black (BK) ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Compare
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
BC2212-PA66HIRHS-BK 151-00017
Compare
Add to watchlist
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.
SOC11FTOVAL-PA66HIRHS-NA 151-00932
Compare
Add to watchlist
3000 pcs.
Natural (NA) SOC11FTOVAL-PA66HIRHS-NA 151-00932
Bundling clip for hole (round), L=55.0mm, black, 8000pcs.
Bundling Clip for round holes 6.5 mm.
Compare
Bundling clip for hole (round), L=55.0mm, black, 8000pcs.
TC2FT6LG-PA66HIRHS-BK 151-00827
Compare
Add to watchlist
8000 pcs.
Black (BK) TC2FT6LG-PA66HIRHS-BK 151-00827
Bundling clip for hole (round), L=55.0mm, natural, 8000pcs.
Bundling Clip for round holes 6.5 mm.
Compare
Bundling clip for hole (round), L=55.0mm, natural, 8000pcs.
TC2FT6LG-PA66HIRHS-NA 151-00828
Compare
Add to watchlist
8000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00828
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Compare
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
TC3FT6S-PA66HIRHS-BK 151-00028
Compare
Add to watchlist
1000 pcs.
Black (BK) TC3FT6S-PA66HIRHS-BK 151-00028
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, natural, 100pcs.
T120I-PA66-NA 111-12219
Compare
Add to watchlist
100 pcs.
Natural (NA) T120I-PA66-NA 111-12219
Cable tie inside serrated, 301.63x7.6mm, ⌀4.8-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 301.63x7.6mm, ⌀4.8-80.0mm, black, 100pcs.
T120I-PA66W-BK 111-01968
Compare
Add to watchlist
100 pcs.
Black (BK) T120I-PA66W-BK 111-01968
Cable tie inside serrated, 387.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
Compare
Cable tie inside serrated, 387.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
T120R-PA66W-BK 111-00400
Compare
Add to watchlist
100 pcs.
Black (BK) T120R-PA66W-BK 111-00400
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.
T18L-PA66W-BK 111-01973
Compare
Add to watchlist
100 pcs.
Black (BK) T18L-PA66W-BK 111-01973
Releasable cable tie, 752.0x13.0mm, ⌀40.0-210.0mm, 888N, black, 5pcs.
Compare
Releasable cable tie, 752.0x13.0mm, ⌀40.0-210.0mm, 888N, black, 5pcs.
SpeedyTie (RTT750HR)-PA66HIR(S)-BK 115-00030
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
5 pcs.
Black (BK) SpeedyTie (RTT750HR)-PA66HIR(S)-BK 115-00030
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 340x7.6mm, ⌀16.0-90.0mm, 535N, natural, 100pcs.
Releasable and reusable cable tie, RLT-Series.
Compare
Releasable cable tie, 340x7.6mm, ⌀16.0-90.0mm, 535N, natural, 100pcs.
RLT120-PA66-NA 111-70319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RLT120-PA66-NA 111-70319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Compare
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB100M-PA66HS-BK 150-29100
Compare
Add to watchlist
500 pcs.
Black (BK) FBB100M-PA66HS-BK 150-29100
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Compare
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB185M-PA66HS-BK 150-29180
Compare
Add to watchlist
500 pcs.
Black (BK) FBB185M-PA66HS-BK 150-29180
Fixing tie for stud, inside serrated, ⌀6.0-26.0mm, black, 560pcs.
LFC165-2 for bundle diameters up to 35.0 mm.
Compare
Fixing tie for stud, inside serrated, ⌀6.0-26.0mm, black, 560pcs.
LFC155-PA66-BK 131-60070
Compare
Add to watchlist
560 pcs.
Black (BK) LFC155-PA66-BK 131-60070
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
WSS250-PA66HIRHSUV-BK 157-00400
Compare
Add to watchlist
300 pcs.
Black (BK) WSS250-PA66HIRHSUV-BK 157-00400
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M6-PA66HSUV-BK 157-00038
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M8-PA66HSW-BK 157-00039
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M10-PA66HSW-BK 157-00040
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040
Fixing tie for stud, ⌀9.5-86.4mm, black, 250pcs.
Nut or weld nesting counterbore provides flush mounting at the base
Compare
Fixing tie for stud, ⌀9.5-86.4mm, black, 250pcs.
SDCTL-PA66HIRHSUV-BK 157-00060
Compare
Add to watchlist
250 bag
Black (BK) SDCTL-PA66HIRHSUV-BK 157-00060
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M6-PA66HSUV-GY 157-00065
Compare
Add to watchlist
100 pcs.
Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8-PA66HSW-GY 157-00066
Compare
Add to watchlist
100 pcs.
Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
WSIFT9A-PA66HIRHSUV-BK 156-00069
Compare
Add to watchlist
100 pcs.
Black (BK) WSIFT9A-PA66HIRHSUV-BK 156-00069
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
WSRFT9A-PA66HIRHSUV-BK 156-00070
Compare
Add to watchlist
100 pcs.
Black (BK) WSRFT9A-PA66HIRHSUV-BK 156-00070
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Compare
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
WSSFT9B-PA66HIRHSUV-BK 156-00072
Compare
Add to watchlist
100 pcs.
Black (BK) WSSFT9B-PA66HIRHSUV-BK 156-00072
Fixing tie for hole (round), outside serrated, ⌀5.0-105.0mm, black, 100pc.
Compare
Fixing tie for hole (round), outside serrated, ⌀5.0-105.0mm, black, 100pc.
T120ROSFT9CLG-PA66HS/PA66HIRHSUV-BK 156-01561
Compare
Add to watchlist
100
Black (BK) T120ROSFT9CLG-PA66HS/PA66HIRHSUV-BK 156-01561
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 2000pcs.
All ties rated to 222 N (50 lb) tensile strength to ensure long-term bundling reliability.
Compare
Fixing tie for hole (round), ⌀2.0-50.0mm, black, 2000pcs.
T50ROS15ACCSRAH-PA66HIRHSUV/TPE-BK 156-02466
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROS15ACCSRAH-PA66HIRHSUV/TPE-BK 156-02466
Fixing tie for hole (round), ⌀2.0-50.0mm, black/grey, 2200pcs.
Integrated dual seal meets IP65 for protection against water, dust, chemicals, air and sound.
Compare
Fixing tie for hole (round), ⌀2.0-50.0mm, black/grey, 2200pcs.
T50ROS15ACCSRAH1.4T-PA66HIRHSUV/TPE-BK/GY 156-02467
Compare
Add to watchlist
2200 pcs.
Black (BK), Grey (GY) T50ROS15ACCSRAH1.4T-PA66HIRHSUV/TPE-BK/GY 156-02467
Fixing tie for hole (round), ⌀2-50mm, black/grey, 2000pcs.
Sealed arrowhead meets USCAR44 push in, pull off and sealing standards.
Compare
Fixing tie for hole (round), ⌀2-50mm, black/grey, 2000pcs.
T50ROS25BCCSRAH1.4T-PA66HIRHSUV/TPE-BK/GY 156-02544
Compare
Add to watchlist
2000 pcs.
Black (BK), Grey (GY) T50ROS25BCCSRAH1.4T-PA66HIRHSUV/TPE-BK/GY 156-02544
Fixing tie for hole (round), ⌀2-50.0mm, black, 2000pcs.
Sealed arrowhead meets USCAR44 push in, pull off and sealing standards.
Compare
Fixing tie for hole (round), ⌀2-50.0mm, black, 2000pcs.
T50ROS25BCCSRAH-PA66HIRHSUV/TPE-BK 156-02545
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROS25BCCSRAH-PA66HIRHSUV/TPE-BK 156-02545
Fixing tie for hole (round), outside serrated, ⌀5.0-15.0mm, black, 500pcs.
T50SOSDSFT6.5 for parallel routing.
Compare
Fixing tie for hole (round), outside serrated, ⌀5.0-15.0mm, black, 500pcs.
T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
Fixing tie for hole (oval), ⌀2.0-50.0mm, black, 2000pcs.
Low-profile design saves 5 mm of height when installed.
Compare
Fixing tie for hole (oval), ⌀2.0-50.0mm, black, 2000pcs.
T50ROS15ACCSAHOVAL-PA66HIRHSUV/TPE-BK 156-01804
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROS15ACCSAHOVAL-PA66HIRHSUV/TPE-BK 156-01804
Fixing tie for hole (oval), ⌀2-50.0mm, black, 2000pcs.
Low-profile design saves 5 mm of height when installed.
Compare
Fixing tie for hole (oval), ⌀2-50.0mm, black, 2000pcs.
T50ROS25BCCSAHOVAL-PA66HIRHSUV/TPE-BK 156-02543
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROS25BCCSAHOVAL-PA66HIRHSUV/TPE-BK 156-02543
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, natural, 100pcs.
Q-Series mounting bases are designed to work exclusively with the Q-Tie® cable tie series.
Compare
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, natural, 100pcs.
QM20A-PA66-NA 151-10904
Compare
Add to watchlist
100 pcs.
Natural (NA) QM20A-PA66-NA 151-10904
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, black, 100pcs.
Q-Series mounting bases are designed to work exclusively with the Q-Tie® cable tie series.
Compare
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, black, 100pcs.
QM20A-PA66-BK 151-10914
Compare
Add to watchlist
100 pcs.
Black (BK) QM20A-PA66-BK 151-10914
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, natural, 100pcs.
Q-Series mounting bases are designed to work exclusively with the Q-Tie® cable tie series.
Compare
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, natural, 100pcs.
QM30A-PA66-NA 151-10905
Compare
Add to watchlist
100 pcs.
Natural (NA) QM30A-PA66-NA 151-10905
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, black, 100pcs.
Q-Series mounting bases are designed to work exclusively with the Q-Tie® cable tie series.
Compare
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, black, 100pcs.
QM30A-PA66-BK 151-10915
Compare
Add to watchlist
100 pcs.
Black (BK) QM30A-PA66-BK 151-10915
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, natural, 50pcs.
Q-Series mounting bases are designed to work exclusively with the Q-Tie® cable tie series.
Compare
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, natural, 50pcs.
QM40A-PA66-NA 151-10906
Compare
Add to watchlist
50 pcs.
Natural (NA) QM40A-PA66-NA 151-10906
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
Q-Series mounting bases are designed to work exclusively with the Q-Tie® cable tie series.
Compare
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
QM40A-PA66-BK 151-10916
Compare
Add to watchlist
50 pcs.
Black (BK) QM40A-PA66-BK 151-10916
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
Compare
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
ATSFT5LG-PA66HIRHS-BK 102-67050
Compare
Add to watchlist
5000 pcs.
Black (BK) ATSFT5LG-PA66HIRHS-BK 102-67050
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
MCKR Mount, screwable, detectable.
Compare
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
MCKR6G5-PA66MD-BU 151-00950
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Blue (BU) MCKR6G5-PA66MD-BU 151-00950
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀5.1 mm, M5 Screw, blue, 100pcs.
MCKR Mount, screwable, detectable.
Compare
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀5.1 mm, M5 Screw, blue, 100pcs.
MCKR8G5-5-PA66MD-BU 151-01020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Blue (BU) MCKR8G5-5-PA66MD-BU 151-01020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Eliminates the need for multiple sizes of fixed diameter clamps.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
Simple to install with a screw or rivet.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
White (WH) MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.
Compare
Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.
T60ROSSB6HEC-PA66HS-BK 157-00101
Compare
Add to watchlist
500 pcs.
Black (BK) T60ROSSB6HEC-PA66HS-BK 157-00101
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Klam-Klips KK1 - 4.
Compare
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Natural (NA) H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
YouTube  LinkedIn  Link Corporate Blog 
문의하기 법적고지 저작권고지 지침 및 책무 개인정보 보호 정책 뉴스레터 사이트맵
업데이트: 05/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.288.1) | 업데이트: 05/10/2025 | 개인 정보 설정
문의