Results for "cable clips" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

Cable clip for stud, Dmax=13.5mm, ⌀5.0 mm

SBF2 for fixing on weld studs and cables need to be routed close to stud.

Compare

SBF2-PA66-BK 150-47700

Compare

Add to watchlist

SBF2 for fixing on weld studs and cables need to be routed close to stud.

Compare

Cable clip for stud, Dmax=13.5mm, ⌀5.0 mm

Compare

Add to watchlist

500 pcs.

Black (BK) SBF2-PA66-BK 150-47700

Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5

Arrowhead clip with TwistLock.

Compare

HTS9-PA66-BK 151-00725

Compare

Add to watchlist

Arrowhead clip with TwistLock.

Compare

Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5

Compare

Add to watchlist

100 pcs.

Black (BK) HTS9-PA66-BK 151-00725

Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5

Arrowhead clip with TwistLock.

Compare

HTS9-PA66-NA 151-02173

Compare

Add to watchlist

Arrowhead clip with TwistLock.

Compare

Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5

Compare

Add to watchlist

100 pcs.

Natural (NA) HTS9-PA66-NA 151-02173

Cable clip, T=1.3 - 2.3mm, ⌀4.8 mm, Dmin=10.8mm, Dmax=11.8mm, nom⌀=11.3 mm

Arrowhead clip with TwistLock.

Compare

HTL9-PA66-BK 151-00726

Compare

Add to watchlist

Arrowhead clip with TwistLock.

Compare

Cable clip, T=1.3 - 2.3mm, ⌀4.8 mm, Dmin=10.8mm, Dmax=11.8mm, nom⌀=11.3 mm

Compare

Add to watchlist

100 pcs.

Black (BK) HTL9-PA66-BK 151-00726

Cable clip, T=1.3 - 2.3mm, ⌀4.8 mm, Dmin=10.8mm, Dmax=11.8mm, nom⌀=11.3 mm

Arrowhead clip with TwistLock.

Compare

HTL9-PA66-NA 151-00727

Compare

Add to watchlist

Arrowhead clip with TwistLock.

Compare

Cable clip, T=1.3 - 2.3mm, ⌀4.8 mm, Dmin=10.8mm, Dmax=11.8mm, nom⌀=11.3 mm

Compare

Add to watchlist

100 pcs.

Natural (NA) HTL9-PA66-NA 151-00727

Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm

Compare

ICD5x10FT6LGSTUD5-PA66HIRHS-BK 156-00314

Compare

Add to watchlist

Compare

Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm

Compare

Add to watchlist

2000 pcs.

Black (BK) ICD5x10FT6LGSTUD5-PA66HIRHS-BK 156-00314

Bundling clip for hole (round), L=50.0mm, SO=22.6mm, black, 1500pcs.

Standoff design secures the bundle away from the mounting hole and areas that could cause damage due to rubbing.

Compare

SOC23SO18-PA66HIRHS-BK 133-03836

Compare

Add to watchlist

Standoff design secures the bundle away from the mounting hole and areas that could cause damage due to rubbing.

Compare

Bundling clip for hole (round), L=50.0mm, SO=22.6mm, black, 1500pcs.

Compare

Add to watchlist

1500 pcs.

Black (BK) SOC23SO18-PA66HIRHS-BK 133-03836

Bundling clip for hole (round), L=45.0mm, SO=20.3mm, natural, 2000pcs.

Compare

SOC14FT6-PA66HIRHS-NA 133-01497

Compare

Add to watchlist

Compare

Bundling clip for hole (round), L=45.0mm, SO=20.3mm, natural, 2000pcs.

Compare

Add to watchlist

2000 pcs.

Natural (NA) SOC14FT6-PA66HIRHS-NA 133-01497

Cable clip for screw fixation, ⌀3.1 mm

FKH80 are designed to retain flat ribbon cables.

Compare

FKH80-PA66HIR-BK 151-16800

Compare

Add to watchlist

FKH80 are designed to retain flat ribbon cables.

Compare

Cable clip for screw fixation, ⌀3.1 mm

Compare

Add to watchlist

100 pcs.

Black (BK) FKH80-PA66HIR-BK 151-16800

Cable clip for stud, ⌀6.2 x 12.2 mm, Dmin=35mm, Dmax=45mm

IAHC( )AH in combination with an IAHC( )T.

Compare

IAHC5EH-PA66HIRHS-BK 151-00768

Compare

Add to watchlist

IAHC( )AH in combination with an IAHC( )T.

Compare

Cable clip for stud, ⌀6.2 x 12.2 mm, Dmin=35mm, Dmax=45mm

Compare

Add to watchlist

500 pcs.

Black (BK) IAHC5EH-PA66HIRHS-BK 151-00768

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm

IAHC( )AH in combination with an IAHC( )T.

Compare

IAHC5FH-PA66HIRHS-BK 151-00787

Compare

Add to watchlist

IAHC( )AH in combination with an IAHC( )T.

Compare

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm

Compare

Add to watchlist

350 pcs.

Black (BK) IAHC5FH-PA66HIRHS-BK 151-00787

Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

AHC3EH2-PA66HIRHS-BK 151-00928

Compare

Add to watchlist

Compare

Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

Add to watchlist

800 pcs.

Black (BK) AHC3EH2-PA66HIRHS-BK 151-00928

Blind plug, ⌀M6, T=M6mm, black, 5000pcs.

Disc covers the hole and minimizes ingress of dust, dirt and water.

Compare

M6PUSHPIN-PA66HIRHSUV-BK 151-01304

Compare

Add to watchlist

Disc covers the hole and minimizes ingress of dust, dirt and water.

Compare

Blind plug, ⌀M6, T=M6mm, black, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Black (BK) M6PUSHPIN-PA66HIRHSUV-BK 151-01304

Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 5.5mm, grey, 5000pcs.

Compare

FT6.5 Plug-PA66HIRHS-GY 151-02958

Compare

Add to watchlist

Compare

Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 5.5mm, grey, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Grey (GY) FT6.5 Plug-PA66HIRHS-GY 151-02958

Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.

Compare

FT6.5Plug-PA66HIRHSUV-BK 151-01317

Compare

Add to watchlist

Compare

Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Black (BK) FT6.5Plug-PA66HIRHSUV-BK 151-01317

Compare

VC400-PA66-NA 151-01500

Compare

Add to watchlist

Compare

Cable clip

Compare

Add to watchlist

5000 pcs.

Natural (NA) VC400-PA66-NA 151-01500

Cable spacer, black, 250pcs.

Compare

HUATO-PE-BK 151-00811

Compare

Add to watchlist

Compare

Cable spacer, black, 250pcs.

Compare

Add to watchlist

250 pcs.

Black (BK) HUATO-PE-BK 151-00811

Bundling clip for edge, L=40.0mm, black, 500pcs.

Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.

Compare

EC14-PA66HIRHS-BK 151-03404

Compare

Add to watchlist

Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.

Compare

Bundling clip for edge, L=40.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) EC14-PA66HIRHS-BK 151-03404

Bundling clip for edge, L=40.0mm, black, 500pcs.

Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.

Compare

EC15-PA66HIRHS-BK 151-03401

Compare

Add to watchlist

Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.

Compare

Bundling clip for edge, L=40.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) EC15-PA66HIRHS-BK 151-03401

Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.

Bundling Clip for round holes 6.5 mm.

Compare

TC2FT6LG-PA66HIRHS-NA 151-00020

Compare

Add to watchlist

Bundling Clip for round holes 6.5 mm.

Compare

Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.

Compare

Add to watchlist

10000 pcs.

Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00020

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU11-AL-NA 211-10110

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU12-AL-NA 211-10120

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU12-AL-NA 211-10120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU13-AL-NA 211-10130

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU13-AL-NA 211-10130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU29C-AL/CR-BK 211-15290

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

EdgeClip with Twist Lock.

Compare

EC1-3TL7OTP-PA66HIRHS-BK 151-02588

Compare

Add to watchlist

EdgeClip with Twist Lock.

Compare

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

Compare

Add to watchlist

500 pcs.

Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

EdgeClip with Twist Lock.

Compare

EC1-3TL7OTP-PA66HIRHS-BK 151-02993

Compare

Add to watchlist

EdgeClip with Twist Lock.

Compare

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

Compare

Add to watchlist

25 pcs.

Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02993

Cable clip for screw fixation, ⌀3.1 mm

FKH50 are designed to retain flat ribbon cables.

Compare

FKH50-PA66HIR-BK 151-16500

Compare

Add to watchlist

FKH50 are designed to retain flat ribbon cables.

Compare

Cable clip for screw fixation, ⌀3.1 mm

Compare

Add to watchlist

100 pcs.

Black (BK) FKH50-PA66HIR-BK 151-16500

Cable clip, T=1-3mm, Dmin=3mm, Dmax=13mm

Compare

IAHC1TCBTOSTUD5-PA66HIRHS-BK 156-03376

Compare

Add to watchlist

Compare

Cable clip, T=1-3mm, Dmin=3mm, Dmax=13mm

Compare

Add to watchlist

1000 pcs.

Black (BK) IAHC1TCBTOSTUD5-PA66HIRHS-BK 156-03376

Cable clip, T=1.8 - 2.25mm, ⌀13.0 - 15.0 mm, Dmin=4.9mm, Dmax=7.3mm

360° rotatable cable clip for aluminium rails.

Compare

HC2x7.3AH13-PV-PA66W-BK 151-00899

Compare

Add to watchlist

360° rotatable cable clip for aluminium rails.

Compare

Cable clip, T=1.8 - 2.25mm, ⌀13.0 - 15.0 mm, Dmin=4.9mm, Dmax=7.3mm

Compare

Add to watchlist

100 pcs.

Black (BK) HC2x7.3AH13-PV-PA66W-BK 151-00899

Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm

Compare

HC140SFT62x122-PA6HIR-BK 151-00423

Compare

Add to watchlist

Compare

Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm

Compare

Add to watchlist

1200 pcs.

Black (BK) HC140SFT62x122-PA6HIR-BK 151-00423

Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

IAHC( )AH in combination with an IAHC( )T.

Compare

IAHC3BH-PA66HIRHS-BK 151-00380

Compare

Add to watchlist

IAHC( )AH in combination with an IAHC( )T.

Compare

Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

Add to watchlist

650 pcs.

Black (BK) IAHC3BH-PA66HIRHS-BK 151-00380

Connector clip for hole (round), black, 500pcs.

Compare

FT6LG.JAE.CONNECT.TS-PA66HIRHS-BK 151-00459

Compare

Add to watchlist

Compare

Connector clip for hole (round), black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) FT6LG.JAE.CONNECT.TS-PA66HIRHS-BK 151-00459

Connector clip for hole (oval), EWCAP-005-11, brown, 4000Bag

Compare

CCOVAL6-PA46-BN 151-02516

Compare

Add to watchlist

Compare

Connector clip for hole (oval), EWCAP-005-11, brown, 4000Bag

Compare

Add to watchlist

4000 Bag

Brown (BN) CCOVAL6-PA46-BN 151-02516

Connector clip for hole (oval), black, 500pcs.

Compare

CCSFT7x12-PA66HIRHS-BK 151-00194

Compare

Add to watchlist

Compare

Connector clip for hole (oval), black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) CCSFT7x12-PA66HIRHS-BK 151-00194

Connector clip for hole (oval), EWCAP-005-11, black, 10000pcs.

Compare

YCCKSFT62x122PT0.7-1.3-PA66HIRHS-BK 151-00835

Compare

Add to watchlist

Compare

Connector clip for hole (oval), EWCAP-005-11, black, 10000pcs.

Compare

Add to watchlist

10000 pcs.

Black (BK) YCCKSFT62x122PT0.7-1.3-PA66HIRHS-BK 151-00835

Connector clip for hole (oval), EWCAP-005-7, black, 5000pcs.

Connector clip with arrowhead mount.

Compare

CCIVSFT6.5x130-PA66HIRHS-BK 133-00392

Compare

Add to watchlist

Connector clip with arrowhead mount.

Compare

Connector clip for hole (oval), EWCAP-005-7, black, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Black (BK) CCIVSFT6.5x130-PA66HIRHS-BK 133-00392

Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.

Connector Clip for oval holes.

Compare

STECKERHALTER-OVALFUSS-PA66HIRHS-BK 133-00004

Compare

Add to watchlist

Connector Clip for oval holes.

Compare

Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) STECKERHALTER-OVALFUSS-PA66HIRHS-BK 133-00004

Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm

Harness clip OHC8 for pre assembling on harnesses.

Compare

OHC16-PA66HIRHS-BK 151-00335

Compare

Add to watchlist

Harness clip OHC8 for pre assembling on harnesses.

Compare

Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm

Compare

Add to watchlist

2000 pcs.

Black (BK) OHC16-PA66HIRHS-BK 151-00335

Bundling clip for hole (round), L=50.0mm, black, 4000

The 90-degree configuration of this mini channel provides routing for a wire harness around a corner.

Compare

BC90FT6-PA66HIRHSUV-BK 151-00993

Compare

Add to watchlist

The 90-degree configuration of this mini channel provides routing for a wire harness around a corner.

Compare

Bundling clip for hole (round), L=50.0mm, black, 4000

Compare

Add to watchlist

4000

Black (BK) BC90FT6-PA66HIRHSUV-BK 151-00993

Bundling clip for hole (round), L=50.0mm, black, 4000pcs.

Compare

BC90FT6B-PA66HIRHSUV-BK 151-01051

Compare

Add to watchlist

Compare

Bundling clip for hole (round), L=50.0mm, black, 4000pcs.

Compare

Add to watchlist

4000 pcs.

Black (BK) BC90FT6B-PA66HIRHSUV-BK 151-01051

Metal cable clip, metal, 5000pcs.

Compare

Bushing9x7H6T1.2-U-SpS-ML 151-02553

Compare

Add to watchlist

Compare

Metal cable clip, metal, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Metal (ML) Bushing9x7H6T1.2-U-SpS-ML 151-02553

Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm

Compare

RA13-PA66-BK 151-00121

Compare

Add to watchlist

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm

Compare

Add to watchlist

100 pcs.

Black (BK) RA13-PA66-BK 151-00121

Cable clip for adhesive use, ⌀3.1 mm

FKH30 mounts are designed to retain flat ribbon cables.

Compare

FKH30A-PA66HIR-BK 151-15300

Compare

Add to watchlist

FKH30 mounts are designed to retain flat ribbon cables.

Compare

Cable clip for adhesive use, ⌀3.1 mm

Compare

Add to watchlist

100 pcs.

Black (BK) FKH30A-PA66HIR-BK 151-15300

Protection cap for connectors, black, 600pcs.

Connector Clips are available for many different connector types and fixing varieties.

Compare

9632910680-PA6HIR-BK 151-00339

Compare

Add to watchlist

Connector Clips are available for many different connector types and fixing varieties.

Compare

Protection cap for connectors, black, 600pcs.

Compare

Add to watchlist

600 pcs.

Black (BK) 9632910680-PA6HIR-BK 151-00339

Connector clip, black, 6000pcs.

Connector Clips are available for many different connector types and fixing varieties.

Compare

CCFT6LGTS12.5-PA66HIRHS-BK 151-03104

Compare

Add to watchlist

Connector Clips are available for many different connector types and fixing varieties.

Compare

Connector clip, black, 6000pcs.

Compare

Add to watchlist

6000 pcs.

Black (BK) CCFT6LGTS12.5-PA66HIRHS-BK 151-03104

Connector clip for hole (oval), black, 1000pcs.

Compare

CCOVAL-PA66HIRHS-BK 151-02533

Compare

Add to watchlist

Compare

Connector clip for hole (oval), black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) CCOVAL-PA66HIRHS-BK 151-02533

Connector clip, EWCAP-005-7, black, 2000pcs.

Compare

CCM10SO28R-PA66HIRHSUV-BK 151-02802

Compare

Add to watchlist

Compare

Connector clip, EWCAP-005-7, black, 2000pcs.

Compare

Add to watchlist

2000

Black (BK) CCM10SO28R-PA66HIRHSUV-BK 151-02802

Connector clip for connector, EWCAP-005-11, natural, 5000pcs.

USCAR7 bracket easily routes two parallel connectors.

Compare

DBLEFAKRA-POM-NA 133-04652

Compare

Add to watchlist

USCAR7 bracket easily routes two parallel connectors.

Compare

Connector clip for connector, EWCAP-005-11, natural, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Natural (NA) DBLEFAKRA-POM-NA 133-04652

Cable clip, ⌀8.8 - 9.2 mm

Compare

FT9LP-PA66HIRHS-BK 151-01270

Compare

Add to watchlist

Compare

Cable clip, ⌀8.8 - 9.2 mm

Compare

Add to watchlist

500 pcs.

Black (BK) FT9LP-PA66HIRHS-BK 151-01270

Compare

PC4S6-PA66HIRHS-BK 151-01202

Compare

Add to watchlist

Compare

Cable clip

Compare

Add to watchlist

500 pcs.

Black (BK) PC4S6-PA66HIRHS-BK 151-01202

Metal cable clip, ⌀6.0 mm, ⌀8mm, metal, 100pcs.

Compare

SPSWC8-SpS-ML 151-03052

Compare

Add to watchlist

Compare

Metal cable clip, ⌀6.0 mm, ⌀8mm, metal, 100pcs.

Compare

Add to watchlist

100 pcs.

Metal (ML) SPSWC8-SpS-ML 151-03052

Bundling clip, L=39.0mm, black, 500pcs.

Compare

ATSBC2KSFT6.5-PA66HIRHS-BK 102-69068

Compare

Add to watchlist

Compare

Bundling clip, L=39.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) ATSBC2KSFT6.5-PA66HIRHS-BK 102-69068

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU17C-AL/CR-BK 211-15170

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU19C-AL/CR-BK 211-15190

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Compare

ALU23C-AL/CR-BK 211-15230

Compare

Add to watchlist

ALU23C P-Clamp with chloroprene insert.

Compare

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU25C-AL/CR-BK 211-15250

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU26C-AL/CR-BK 211-15260

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU28C-AL/CR-BK 211-15280

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU30C-AL/CR-BK 211-15300

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU34C-AL/CR-BK 211-15340

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU8-AL-NA 211-10080

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

DOC14-L-PA66HIRHS-BK 156-01660

Compare

Add to watchlist

Compare

Cable clip

Compare

Add to watchlist

500 pcs.

Black (BK) DOC14-L-PA66HIRHS-BK 156-01660

Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.

Head design contains clamping rails to provide full circumferential compression around bundles.

Compare

CCOVAL-PA66HIRHSUV-BK 151-00925

Compare

Add to watchlist

Head design contains clamping rails to provide full circumferential compression around bundles.

Compare

Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Black (BK) CCOVAL-PA66HIRHSUV-BK 151-00925

Connector clip for hole (oval), EWCAP-005-11, silver, 5000pcs.

Compare

CCOVAL-PPS-SR 151-01538

Compare

Add to watchlist

Compare

Connector clip for hole (oval), EWCAP-005-11, silver, 5000pcs.

Compare

Add to watchlist

5000 pcs.

Silver (SR) CCOVAL-PPS-SR 151-01538

Connector clip, EWCAP-005-7, grey/black, 4000Carton

Once installed, perpendicular arrowhead arms reduce movement and will not collapse when exposed to water or load.

Compare

SAHOVAL1.4TCC7-PA66HIRHS/TPE-BK/GY 151-02996

Compare

Add to watchlist

Once installed, perpendicular arrowhead arms reduce movement and will not collapse when exposed to water or load.

Compare

Connector clip, EWCAP-005-7, grey/black, 4000Carton

Compare

Add to watchlist

4000 Carton

Grey (GY), Black (BK) SAHOVAL1.4TCC7-PA66HIRHS/TPE-BK/GY 151-02996

Bundling clip for edge, L=40.0mm, black, 500pcs.

Bundling Clip (EC16) for edges 1.0 - 3.0 mm.

Compare

EC16-PA66HIRHS-BK 151-03402

Compare

Add to watchlist

Bundling Clip (EC16) for edges 1.0 - 3.0 mm.

Compare

Bundling clip for edge, L=40.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) EC16-PA66HIRHS-BK 151-03402

Bundling clip for hole (round), L=37.0mm, black, 1000pcs.

Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.

Compare

TC5FT6S-PA66HIRHS-BK 150-95500

Compare

Add to watchlist

Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.

Compare

Bundling clip for hole (round), L=37.0mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) TC5FT6S-PA66HIRHS-BK 150-95500

Backshell, 90°, nom⌀17.0mm, black, 800pcs.

Backshell (V0)

Compare

BSE90NW17-PA66/PA6FR-BK 151-02772

Compare

Add to watchlist

Backshell (V0)

Compare

Backshell, 90°, nom⌀17.0mm, black, 800pcs.

Compare

Add to watchlist

800 pcs.

Black (BK) BSE90NW17-PA66/PA6FR-BK 151-02772

Cable clip for hole (round), ⌀6.5 mm, Dmin=2mm, Dmax=8mm

Harness clip OHC8 for pre assembling on harnesses.

Compare

OHC8-PA66HIRHS-BK 151-00336

Compare

Add to watchlist

Harness clip OHC8 for pre assembling on harnesses.

Compare

Cable clip for hole (round), ⌀6.5 mm, Dmin=2mm, Dmax=8mm

Compare

Add to watchlist

2000 pcs.

Black (BK) OHC8-PA66HIRHS-BK 151-00336

Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.

The holding tab increases the tensile strength additionaly.

Compare

T30REC2.5A-PA66/PA66HS-BK 156-00493

Compare

Add to watchlist

The holding tab increases the tensile strength additionaly.

Compare

Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T30REC2.5A-PA66/PA66HS-BK 156-00493

Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.

The holding tab increases the tensile strength additionaly.

Compare

T30REC2.5B-PA66/PA66HS-BK 156-00494

Compare

Add to watchlist

The holding tab increases the tensile strength additionaly.

Compare

Fixing tie for edge, inside serrated, ⌀4.0-32.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T30REC2.5B-PA66/PA66HS-BK 156-00494

Cable clip for hole (round), ⌀4.7 mm, Dmin=10.0mm, Dmax=11.0mm

Compare

WPC10-PA66-NA 151-75109

Compare

Add to watchlist

Compare

Cable clip for hole (round), ⌀4.7 mm, Dmin=10.0mm, Dmax=11.0mm

Compare

Add to watchlist

500 pcs.

Natural (NA) WPC10-PA66-NA 151-75109

Cable clip for hole (round), T=0,7-2,2mm, ⌀6.2 - 6.7 mm, Dmin=11.0mm, Dmax=20mm

Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.

Compare

AHC2AH-PA66HIRHS-BK 151-02881

Compare

Add to watchlist

Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.

Compare

Cable clip for hole (round), T=0,7-2,2mm, ⌀6.2 - 6.7 mm, Dmin=11.0mm, Dmax=20mm

Compare

Add to watchlist

900 pcs.

Black (BK) AHC2AH-PA66HIRHS-BK 151-02881

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

AHC3BHR-PA66HIRHS-BK 151-00370

Compare

Add to watchlist

Compare

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

Add to watchlist

400 pcs.

Black (BK) AHC3BHR-PA66HIRHS-BK 151-00370

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

AHC3CHR-PA6HIR-BK 151-00371

Compare

Add to watchlist

Compare

Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm

Compare

Add to watchlist

400 pcs.

Black (BK) AHC3CHR-PA6HIR-BK 151-00371

Cable clip for hole (round), ⌀6.5 mm, Dmin=27.0mm, Dmax=41.5mm

Automatic Harness Clip Family for oval holes.

Compare

AHC4AH-PA66HIRHS-BK 151-00374

Compare

Add to watchlist

Automatic Harness Clip Family for oval holes.

Compare

Cable clip for hole (round), ⌀6.5 mm, Dmin=27.0mm, Dmax=41.5mm

Compare

Add to watchlist

400 pcs.

Black (BK) AHC4AH-PA66HIRHS-BK 151-00374

Cable clip for hole (round), T=0.5-2.5mm, ⌀6.2 - 6.7 mm, Dmin=27.0mm, Dmax=36.0mm

Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.

Compare

IAHC4AH-PA66HIRHS-BK 151-00382

Compare

Add to watchlist

Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.

Compare

Cable clip for hole (round), T=0.5-2.5mm, ⌀6.2 - 6.7 mm, Dmin=27.0mm, Dmax=36.0mm

Compare

Add to watchlist

450 pcs.

Black (BK) IAHC4AH-PA66HIRHS-BK 151-00382

Cable clip for hole (oval), T=0.5 - 2.5mm, ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm

Compare

IAHC5BH-PA66HIRHS-BK 151-00384

Compare

Add to watchlist

Compare

Cable clip for hole (oval), T=0.5 - 2.5mm, ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm

Compare

Add to watchlist

500 pcs.

Black (BK) IAHC5BH-PA66HIRHS-BK 151-00384

Fixing tie for edge, ⌀50.0mm, black, 500pcs.

EdgeClip CBTO50R, rotatable 90°.

Compare

T50ROSCBTO-PA66HS/PA66HIRHS-BK 156-02704

Compare

Add to watchlist

EdgeClip CBTO50R, rotatable 90°.

Compare

Fixing tie for edge, ⌀50.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSCBTO-PA66HS/PA66HIRHS-BK 156-02704

Compare

PC4DST-PA66HIRHS-BK 151-01201

Compare

Add to watchlist

Compare

Cable clip

Compare

Add to watchlist

500 pcs.

Black (BK) PC4DST-PA66HIRHS-BK 151-01201

Cable spacer, H=18.0mm, black, 500pcs.

Compare

Spacing-2-PE-BK 151-01103

Compare

Add to watchlist

Compare

Cable spacer, H=18.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) Spacing-2-PE-BK 151-01103

Cable spacer, H=27.0mm, black, 500pcs.

Compare

Spacing-3-PE-BK 151-01104

Compare

Add to watchlist

Compare

Cable spacer, H=27.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) Spacing-3-PE-BK 151-01104

Bundling clip for hole (round), L=50.0mm, SO=32.0mm, black, 1500pcs.

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

SOC12FTOVAL-PA66HIRHSUV-BK 151-01117

Compare

Add to watchlist

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

Bundling clip for hole (round), L=50.0mm, SO=32.0mm, black, 1500pcs.

Compare

Add to watchlist

1500 pcs.

Black (BK) SOC12FTOVAL-PA66HIRHSUV-BK 151-01117

Bundling clip for hole (round), L=50.0mm, SO=32.0mm, natural, 1500pcs.

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

SOC12FTOVAL-PA66HIRHS-NA 151-01238

Compare

Add to watchlist

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

Bundling clip for hole (round), L=50.0mm, SO=32.0mm, natural, 1500pcs.

Compare

Add to watchlist

1500 pcs.

Natural (NA) SOC12FTOVAL-PA66HIRHS-NA 151-01238

Cable clip for adhesive use, ⌀3.1 mm

FKH Flat ribbon cable clip, screwable.

Compare

FKH25A-PA66HIR-BK 151-15250

Compare

Add to watchlist

FKH Flat ribbon cable clip, screwable.

Compare

Cable clip for adhesive use, ⌀3.1 mm

Compare

Add to watchlist

100 pcs.

Black (BK) FKH25A-PA66HIR-BK 151-15250

Cable clip for adhesive use, ⌀3.1 mm

FKH50 are designed to retain flat ribbon cables.

Compare

FKH50A-PA66HIR-BK 151-15500

Compare

Add to watchlist

FKH50 are designed to retain flat ribbon cables.

Compare

Cable clip for adhesive use, ⌀3.1 mm

Compare

Add to watchlist

100 pcs.

Black (BK) FKH50A-PA66HIR-BK 151-15500

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H1P-PA66-NA 211-60019

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H1P-PA66-NA 211-60019

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H5P-PA66-NA 211-60059

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H5P-PA66-NA 211-60059

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU10-AL-NA 211-10100

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU13C-AL/CR-BK 211-15130

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU14C-AL/CR-BK 211-15140

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU16C-AL/CR-BK 211-15160

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU18C-AL/CR-BK 211-15180

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU22C-AL/CR-BK 211-15220

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU24C-AL/CR-BK 211-15240

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU4C-AL/CR-BK 211-15040

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU7-AL-NA 211-10070

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU6-AL-NA 211-10060

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Blind plug, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, T=0.6 - 8.0mm, black, 3000pcs.

Disc surrounding push pin minimizes the ingress of dust, dirt and water.

Compare

PLUGFTOVALXL-PA66HIRHSUV-BK 133-02029

Compare

Add to watchlist

Disc surrounding push pin minimizes the ingress of dust, dirt and water.

Compare

Blind plug, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, T=0.6 - 8.0mm, black, 3000pcs.

Compare

Add to watchlist

3000 pcs.

Black (BK) PLUGFTOVALXL-PA66HIRHSUV-BK 133-02029

Compare

FC14-PE/ST-BK 148-00017

Compare

Add to watchlist

Compare

Cable clip

Compare

Add to watchlist

100 pcs.

Black (BK) FC14-PE/ST-BK 148-00017

Results for "cable clips" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

‹ › ×