Results for "Cable tie mount for screw fixation" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU6-AL-NA 211-10060

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp fixing clamp, Dmin=12.7mm, Dmax=19.5mm, black, 280pcs.

Compare

RCBHANGERFS-PA66HIRHSUV/ZN-BK 151-03620

Compare

Add to watchlist

Compare

P-clamp fixing clamp, Dmin=12.7mm, Dmax=19.5mm, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCBHANGERFS-PA66HIRHSUV/ZN-BK 151-03620

P-clamp single-lobe clamp, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Compare

RCCHANGERFS-PA66HIRHSUV/ZN-BK 151-03621

Compare

Add to watchlist

Compare

P-clamp single-lobe clamp, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCCHANGERFS-PA66HIRHSUV/ZN-BK 151-03621

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀5.6 mm, 180°, black, 140pcs.

Compare

RCDHANGERFS-PA66HIRHSUV/ZN-BK 151-03622

Compare

Add to watchlist

Compare

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀5.6 mm, 180°, black, 140pcs.

Compare

Add to watchlist

140 pcs.

Black (BK) RCDHANGERFS-PA66HIRHSUV/ZN-BK 151-03622

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU11C-AL/CR-BK 211-15110

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU15C-AL/CR-BK 211-15150

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU20C-AL/CR-BK 211-15200

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU4-AL-NA 211-10040

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU5-AL-NA 211-10050

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU5C-AL/CR-BK 211-15050

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU6C-AL/CR-BK 211-15060

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU7C-AL/CR-BK 211-15070

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU9C-AL/CR-BK 211-15090

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H5P-PA66-NA 211-60059

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H5P-PA66-NA 211-60059

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU10C-CR/AL-BK 211-15100

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU12C-AL/CR-BK 211-15120

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU8C-AL/CR-BK 211-15080

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.

Compare

RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875

Compare

Add to watchlist

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Compare

RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057

Compare

Add to watchlist

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057

Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.

Cable tie with very robust HDM-mount for screw applications.

Compare

T120RHDM6-PA66HIRHS-BK 156-00406

Compare

Add to watchlist

Cable tie with very robust HDM-mount for screw applications.

Compare

Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T120RHDM6-PA66HIRHS-BK 156-00406

Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.

Compare

T120RHDM8-PA66HIRHS-BK 156-00408

Compare

Add to watchlist

Compare

Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T120RHDM8-PA66HIRHS-BK 156-00408

Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, grey, 100pcs.

Compare

T120RHDM8-PA46-GY 156-00409

Compare

Add to watchlist

Compare

Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T120RHDM8-PA46-GY 156-00409

Fixing tie for screw fixation, inside serrated, ⌀15.0-50mm, black, 500pcs.

These HDM (Heavy duty mount) are suitable for assembling on screws.

Compare

T50RHDM6-PA66HIRHS-BK 156-00410

Compare

Add to watchlist

These HDM (Heavy duty mount) are suitable for assembling on screws.

Compare

Fixing tie for screw fixation, inside serrated, ⌀15.0-50mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50RHDM6-PA66HIRHS-BK 156-00410

Fixing tie for screw fixation, inside serrated, ⌀5.0-55.0mm, grey, 500pcs.

These HDM (Heavy duty mount) are suitable for assembling on screws.

Compare

T120SHDM8-PA46-GY 156-00429

Compare

Add to watchlist

These HDM (Heavy duty mount) are suitable for assembling on screws.

Compare

Fixing tie for screw fixation, inside serrated, ⌀5.0-55.0mm, grey, 500pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T120SHDM8-PA46-GY 156-00429

Cable tie mount for screw fixation, Wmax=4.1mm, ⌀3.1 mm, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MB-Series Mounts with square design / self-adhesive, screwable.

Compare

MB3-PA66-WH 151-28359

Compare

Add to watchlist

MB-Series Mounts with square design / self-adhesive, screwable.

Compare

Cable tie mount for screw fixation, Wmax=4.1mm, ⌀3.1 mm, white, 100pcs.

Compare

Add to watchlist

100 pcs.

White (WH) MB3-PA66-WH 151-28359

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.8mm, ⌀6.0 mm, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

HDM375BDM4W is suitable for up to 2 cable ties.

Compare

HDM6-PA66HIRHS-BK 151-00640

Compare

Add to watchlist

HDM375BDM4W is suitable for up to 2 cable ties.

Compare

Cable tie mount for screw fixation, Wmax=7.8mm, ⌀6.0 mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) HDM6-PA66HIRHS-BK 151-00640

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "Cable tie mount for screw fixation" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

‹ › ×