Results for "cable-ties-and-fixings" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, grey, 500pcs.

Cable tie with edge clip.

Compare

T50ROSEC4A-PA46-GY 156-03049

Compare

Add to watchlist

Cable tie with edge clip.

Compare

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, grey, 500pcs.

Compare

Add to watchlist

500 pcs.

Grey (GY) T50ROSEC4A-PA46-GY 156-03049

Fixing tie for edge, outside serrated, ⌀1.5-45.0mm, grey, 500pcs.

Compare

T50ROSEC20-PA46-GY 156-02748

Compare

Add to watchlist

Compare

Fixing tie for edge, outside serrated, ⌀1.5-45.0mm, grey, 500pcs.

Compare

Add to watchlist

500 pcs.

Grey (GY) T50ROSEC20-PA46-GY 156-02748

Fixing tie for hole (round), ⌀4.0-31.0mm, black, 4000pcs.

These fir tree fixings can also be used in threaded, blind holes.

Compare

T30RFT8-PA66HS-BK 156-03701

Compare

Add to watchlist

These fir tree fixings can also be used in threaded, blind holes.

Compare

Fixing tie for hole (round), ⌀4.0-31.0mm, black, 4000pcs.

Compare

Add to watchlist

4000 pcs.

Black (BK) T30RFT8-PA66HS-BK 156-03701

Fixing tie for hole (round), ⌀4.0-105.0mm, black, 1500

Friction tab inside the fir tree allows the tie to sit in mount without falling out prior to installation.

Compare

T50LFT8-PA66HS-BK 156-03703

Compare

Add to watchlist

Friction tab inside the fir tree allows the tie to sit in mount without falling out prior to installation.

Compare

Fixing tie for hole (round), ⌀4.0-105.0mm, black, 1500

Compare

Add to watchlist

1500

Black (BK) T50LFT8-PA66HS-BK 156-03703

Fixing tie for hole (round), inside serrated, ⌀100.0mm, black, 100pcs.

These fir tree fixings can also be used in threaded, blind holes.

Compare

T150RFT9-PA66HS/PA66HIRHS-BK 156-00845

Compare

Add to watchlist

These fir tree fixings can also be used in threaded, blind holes.

Compare

Fixing tie for hole (round), inside serrated, ⌀100.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T150RFT9-PA66HS/PA66HIRHS-BK 156-00845

Fixing tie for edge, ⌀1.6-30mm, black, 500pcs.

2-piece fixing tie for edges 0.5-2.5 mm, side fixation.

Compare

T30ROSEC0.5-2.5SP-SVA-PA66HS/PA66HIRHS-BK 156-03863

Compare

Add to watchlist

2-piece fixing tie for edges 0.5-2.5 mm, side fixation.

Compare

Fixing tie for edge, ⌀1.6-30mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T30ROSEC0.5-2.5SP-SVA-PA66HS/PA66HIRHS-BK 156-03863

Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.

Compare

ATSFT6LG-PA66HIRHS-BK 102-67062

Compare

Add to watchlist

Compare

Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.

Compare

Add to watchlist

2000 pcs.

Black (BK) ATSFT6LG-PA66HIRHS-BK 102-67062

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

CTM3-PA66-BK 151-30600

Compare

Add to watchlist

Compare

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) CTM3-PA66-BK 151-30600

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

CTAM mounts for applications with limited space.

Compare

CTAM1-PEEK-BGE 151-00757

Compare

Add to watchlist

CTAM mounts for applications with limited space.

Compare

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.

Compare

Add to watchlist

100 pcs.

Beige (BGE) CTAM1-PEEK-BGE 151-00757

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Allows multiple cables to be run in parallel.

Compare

MP4M3-PA66-NA 151-24419

Compare

Add to watchlist

Allows multiple cables to be run in parallel.

Compare

Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MP4M3-PA66-NA 151-24419

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MSMP5/10-PA66-NA 151-25519

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀5.1 mm, #10 (M5) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MSMP5/10-PA66-NA 151-25519

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀3.8 mm, #6 (M3) Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

MSMP4 mounting plate, screwable.

Compare

MSMP6/6-PA66-NA 151-25619

Compare

Add to watchlist

MSMP4 mounting plate, screwable.

Compare

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀3.8 mm, #6 (M3) Screw, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) MSMP6/6-PA66-NA 151-25619

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Compare

HDM312-PA66HIRHSUV-BK 151-00439

Compare

Add to watchlist

Mount and tie combination makes it easy to service bundles in the field.

Compare

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) HDM312-PA66HIRHSUV-BK 151-00439

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Compare

HDM320-PA66HIRHSUV-BK 151-02094

Compare

Add to watchlist

Mount and tie combination makes it easy to service bundles in the field.

Compare

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) HDM320-PA66HIRHSUV-BK 151-02094

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Compare

HDM400-PA66HIRHSUV-BK 151-01224

Compare

Add to watchlist

Mount and tie combination makes it easy to service bundles in the field.

Compare

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) HDM400-PA66HIRHSUV-BK 151-01224

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.

Compare

EC33-PA66HIRHS-BK 151-00192

Compare

Add to watchlist

Compare

Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) EC33-PA66HIRHS-BK 151-00192

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Compare

QGDHC5.2-8.0M-PA66W-BK 151-04088

Compare

Add to watchlist

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Compare

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie with pipe/tube holder, inside serrated, ⌀15.0-19.0mm, black, 1000pcs.

The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.

Compare

T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292

Compare

Add to watchlist

The 360 degree locking enclosure and cable tie dynamically fit a range of bundle sizes.

Compare

Fixing tie with pipe/tube holder, inside serrated, ⌀15.0-19.0mm, black, 1000pcs.

Compare

Add to watchlist

2000 pcs.

Black (BK) T50RLOC15-19-SET-PA66HS/PA66HIRHSUV-BK 156-01292

Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.

Extreme temperature range for excellent performance in a range of environments.

Compare

PT220-PEEK-BGE 111-01235

Compare

Add to watchlist

Extreme temperature range for excellent performance in a range of environments.

Compare

Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.

Compare

Add to watchlist

100 pcs.

Beige (BGE) PT220-PEEK-BGE 111-01235

Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.0 mm/6.35 mm (hexagonal), ⌀6.35 mm, #1/4" (M6) Screw, grey, 500pcs.

Separates bundles from wear and chafing, providing additional longevity.

Compare

S2CM25-PA66HIRHS-GY 151-29400

Compare

Add to watchlist

Separates bundles from wear and chafing, providing additional longevity.

Compare

Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.0 mm/6.35 mm (hexagonal), ⌀6.35 mm, #1/4" (M6) Screw, grey, 500pcs.

Compare

Add to watchlist

500 pcs.

Grey (GY) S2CM25-PA66HIRHS-GY 151-29400

Cable tie mount for cable bundles, Wmax=12.7mm, black, 50pcs.

Compare

DSWS5-PA66HS/PA46-BK 151-06502

Compare

Add to watchlist

Compare

Cable tie mount for cable bundles, Wmax=12.7mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) DSWS5-PA66HS/PA46-BK 151-06502

Cable tie mount for cable bundles, Wmax=12.7mm, black, 2200pcs.

The spacers can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle.

Compare

DSWS4-PA66HS/POM-BK 151-06500

Compare

Add to watchlist

The spacers can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle.

Compare

Cable tie mount for cable bundles, Wmax=12.7mm, black, 2200pcs.

Compare

Add to watchlist

2200 pcs.

Black (BK) DSWS4-PA66HS/POM-BK 151-06500

2-piece fixing ties with fir tree, with disc, for round holes

Fixing tie for round holes with a hole size of 6.5 up to 7.0 mm and for a panel thickness of 0.8 mm - 6.0 mm.

Compare

T50ROSFT6LG-PA66HS/PA66HIRHS-BK 920-30058

Compare

Add to watchlist

Fixing tie for round holes with a hole size of 6.5 up to 7.0 mm and for a panel thickness of 0.8 mm - 6.0 mm.

Compare

2-piece fixing ties with fir tree, with disc, for round holes

Compare

Add to watchlist

Black (BK) T50ROSFT6LG-PA66HS/PA66HIRHS-BK 920-30058

1-piece fixing ties with fir tree, with disc

Compare

OS180FT6513-PA66HS-BK 920-30026

Compare

Add to watchlist

Compare

1-piece fixing ties with fir tree, with disc

Compare

Add to watchlist

Black (BK) OS180FT6513-PA66HS-BK 920-30026

Stainless steel cable tie, ball bearing lock, 838.0x7.9mm, ⌀12.0-254.0mm, metal, 50pcs.

Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.

Compare

MBT33H-SS316L-ML 111-94339

Compare

Add to watchlist

Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.

Compare

Stainless steel cable tie, ball bearing lock, 838.0x7.9mm, ⌀12.0-254.0mm, metal, 50pcs.

Compare

Add to watchlist

50 pcs.

Metal (ML) MBT33H-SS316L-ML 111-94339

Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RA6 self-adhesive clip for a quick and easy installation.

Compare

RA6-PA66-NA 151-13019

Compare

Add to watchlist

RA6 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RA6-PA66-NA 151-13019

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Self adhesive one piece fixing clips RA- & RB-Series.

Compare

RA9-PA66-NA 151-13020

Compare

Add to watchlist

Self adhesive one piece fixing clips RA- & RB-Series.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RA9-PA66-NA 151-13020

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H11P-PA66-NA 211-60119

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H11P-PA66-NA 211-60119

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H12P-PA66-NA 211-60129

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H12P-PA66-NA 211-60129

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H13P-PA66-NA 211-60139

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) H13P-PA66-NA 211-60139

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H15P-PA66-NA 211-60159

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) H15P-PA66-NA 211-60159

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H2P-PA66HS-BK 211-60001

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H2P-PA66HS-BK 211-60001

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H4P-PA66HS-BK 211-60003

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H4P-PA66HS-BK 211-60003

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H5P-PA66HS-BK 211-60004

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H5P-PA66HS-BK 211-60004

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU15C-AL/CR-BK 211-15150

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU20C-AL/CR-BK 211-15200

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU7C-AL/CR-BK 211-15070

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU9C-AL/CR-BK 211-15090

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.

Compare

Halter SFT6.5-PA66HIRHS-BK 133-00067

Compare

Add to watchlist

Compare

Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067

Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.

The slim line BC series is particularly compact and flexible.

Compare

BC2212-PA66HIRHS-BK 151-00017

Compare

Add to watchlist

The slim line BC series is particularly compact and flexible.

Compare

Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) BC2212-PA66HIRHS-BK 151-00017

Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

SOC11FTOVAL-PA66HIRHS-NA 151-00932

Compare

Add to watchlist

Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.

Compare

Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.

Compare

Add to watchlist

3000 pcs.

Natural (NA) SOC11FTOVAL-PA66HIRHS-NA 151-00932

Bundling clip for hole (round), L=42.0mm, SO=30.0mm, black, 500pcs.

Standoff bundling clip keeps bundles away from areas that could cause damage due to friction or abrasion.

Compare

COW30DP7-PA66HS-BK 151-00080

Compare

Add to watchlist

Standoff bundling clip keeps bundles away from areas that could cause damage due to friction or abrasion.

Compare

Bundling clip for hole (round), L=42.0mm, SO=30.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) COW30DP7-PA66HS-BK 151-00080

Bundling clip for hole (round), L=55.0mm, black, 8000pcs.

Bundling Clip for round holes 6.5 mm.

Compare

TC2FT6LG-PA66HIRHS-BK 151-00827

Compare

Add to watchlist

Bundling Clip for round holes 6.5 mm.

Compare

Bundling clip for hole (round), L=55.0mm, black, 8000pcs.

Compare

Add to watchlist

8000 pcs.

Black (BK) TC2FT6LG-PA66HIRHS-BK 151-00827

Bundling clip for hole (round), L=27.3mm, black, 20000pcs.

Compare

BCOWFT6M-PA66HIRHS-BK 151-02226

Compare

Add to watchlist

Compare

Bundling clip for hole (round), L=27.3mm, black, 20000pcs.

Compare

Add to watchlist

20000 pcs.

Black (BK) BCOWFT6M-PA66HIRHS-BK 151-02226

Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T120L-PA66HIR(S)-BK 111-12402

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) T120L-PA66HIR(S)-BK 111-12402

Cable tie inside serrated, 600x7.6mm, ⌀15.0-175mm, black, 50pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T120XM-PA66-BK 111-12701

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 600x7.6mm, ⌀15.0-175mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) T120XM-PA66-BK 111-12701

Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.

Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.

Compare

T150M-PA66HS-BK 111-15609

Compare

Add to watchlist

Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.

Compare

Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.

Compare

Add to watchlist

25 pcs.

Black (BK) T150M-PA66HS-BK 111-15609

Cable tie inside serrated, 139.7x2.5mm, ⌀1.5-35.0mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T18I-PA66W-BK 111-01972

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 139.7x2.5mm, ⌀1.5-35.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T18I-PA66W-BK 111-01972

Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T18L-PA66W-BK 111-01973

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T18L-PA66W-BK 111-01973

Cable tie inside serrated, 515.0x12.4mm, ⌀12.0-125.0mm, black, 25pcs.

Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.

Compare

T250R-PA66HIRHSUV-BK 111-24805

Compare

Add to watchlist

Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.

Compare

Cable tie inside serrated, 515.0x12.4mm, ⌀12.0-125.0mm, black, 25pcs.

Compare

Add to watchlist

25 pcs.

Black (BK) T250R-PA66HIRHSUV-BK 111-24805

Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, natural, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T30L-PA66HS-NA 111-03459

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) T30L-PA66HS-NA 111-03459

Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35.0mm, grey, 100pcs.

T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.

Compare

T30R-PA46-GY 111-00968

Compare

Add to watchlist

T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.

Compare

Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T30R-PA46-GY 111-00968

Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T30R-PA66W-BK 111-01974

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T30R-PA66W-BK 111-01974

Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T40R-PA66HS-BK 111-03970

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T40R-PA66HS-BK 111-03970

Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T50I-PA66W-BK 111-01975

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50I-PA66W-BK 111-01975

Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T50L-PA66W-BK 111-05440

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50L-PA66W-BK 111-05440

Cable tie inside serrated, 381.0x4.7mm, ⌀5.0-105mm, blue, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T50L-E/TFE-BU 111-00718

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 381.0x4.7mm, ⌀5.0-105mm, blue, 100pcs.

Compare

Add to watchlist

100 pcs.

Blue (BU) T50L-E/TFE-BU 111-00718

Cable tie inside serrated, 200x4.6mm, ⌀3.0-50.0mm, white, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T50R-PA66V0-WH 111-95019

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 200x4.6mm, ⌀3.0-50.0mm, white, 100pcs.

Compare

Add to watchlist

100 pcs.

White (WH) T50R-PA66V0-WH 111-95019

Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T80L-PA66HS-BK 111-00388

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T80L-PA66HS-BK 111-00388

Cable tie inside serrated, 210x4.7mm, ⌀1.5-55.0mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T80R-PA66W-BK 111-01695

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 210x4.7mm, ⌀1.5-55.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T80R-PA66W-BK 111-01695

Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, black, 100pcs.

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

T150R-PA66-BK 111-14810

Compare

Add to watchlist

The Allrounder: T-Series cable ties can be used for almost any type of application.

Compare

Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T150R-PA66-BK 111-14810

Cable tie inside serrated for multiple routing, 395.0x4.7mm, ⌀1.6-101.6mm, black, 100pcs.

Double-head cable ties feature a dual locking design to secure two bundles at once.

Compare

T50LDH-PA66-BK 117-05400

Compare

Add to watchlist

Double-head cable ties feature a dual locking design to secure two bundles at once.

Compare

Cable tie inside serrated for multiple routing, 395.0x4.7mm, ⌀1.6-101.6mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50LDH-PA66-BK 117-05400

Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.

Compare

LK5-PA66W-BK 111-60560

Compare

Add to watchlist

Compare

Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) LK5-PA66W-BK 111-60560

Hook and loop cable tie, 200x12.5mm, Dmax=60.0mm, black, 10pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

TEXTIE M Black quick and simple re-usable

Compare

TEXTIE M-PA66/PP-BK 130-00013

Compare

Add to watchlist

TEXTIE M Black quick and simple re-usable

Compare

Hook and loop cable tie, 200x12.5mm, Dmax=60.0mm, black, 10pcs.

Compare

Add to watchlist

10 pack

Black (BK) TEXTIE M-PA66/PP-BK 130-00013

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Usable for one bolt and stackable for multiple routing and guiding cables and wires in different directions.

Compare

T50SOSWSP5E-PA66HS-BK 157-00209

Compare

Add to watchlist

Usable for one bolt and stackable for multiple routing and guiding cables and wires in different directions.

Compare

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSWSP5E-PA66HS-BK 157-00209

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.

The fixing tie T50SOSSB5-High-E-C-CC for fixation on weld or ISO bolts.

Compare

T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00135

Compare

Add to watchlist

The fixing tie T50SOSSB5-High-E-C-CC for fixation on weld or ISO bolts.

Compare

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00135

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

T50SOSSBD-M6-PA66HSUV-BK 157-00038

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

T50SOSSBD-M8-PA66HSW-BK 157-00039

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

T50SOSSBD-M10-PA66HSW-BK 157-00040

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

T50SOSSBU-M6-PA66HSUV-GY 157-00065

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065

Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.

Compare

T60ROSSB6HEC-PA66HS-BK 157-00101

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T60ROSSB6HEC-PA66HS-BK 157-00101

Fixing tie for stud, ⌀2.0-50.0mm, black, 1500pcs.

Four-pawl, three-tooth design delivers outstanding stud retention to keep bundles secure.

Compare

T50ROSSB5-6U-PA66HIRHSUV-BK 157-00233

Compare

Add to watchlist

Four-pawl, three-tooth design delivers outstanding stud retention to keep bundles secure.

Compare

Fixing tie for stud, ⌀2.0-50.0mm, black, 1500pcs.

Compare

Add to watchlist

1500 pcs.

Black (BK) T50ROSSB5-6U-PA66HIRHSUV-BK 157-00233

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.

Compare

T50SOSEC13E-PA66HS-BK 126-00225

Compare

Add to watchlist

1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.

Compare

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSEC13E-PA66HS-BK 126-00225

Fixing tie for hole (oval), outside serrated, ⌀1.0-33.0mm, black, 500pcs.

This 1-piece fixing tie with fir tree design for oval holes features anti-twist protection.

Compare

OS180FT62122A-PA66HS-BK 157-00104

Compare

Add to watchlist

This 1-piece fixing tie with fir tree design for oval holes features anti-twist protection.

Compare

Fixing tie for hole (oval), outside serrated, ⌀1.0-33.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) OS180FT62122A-PA66HS-BK 157-00104

Fixing tie for hole (oval), outside serrated, ⌀1.0-35.0mm, black, 500pcs.

This 1-piece fixing tie with fir tree design for oval holes features anti-twist protection.

Compare

T50SOS2DOP7X12-E-PA66HS-BK 157-01105

Compare

Add to watchlist

This 1-piece fixing tie with fir tree design for oval holes features anti-twist protection.

Compare

Fixing tie for hole (oval), outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOS2DOP7X12-E-PA66HS-BK 157-01105

Fixing tie for hole (oval), outside serrated, ⌀1.5-35.0mm, black, 1000pcs.

Compare

T50SOS-AS-DFTOVAL-E-PA66HIRHS-BK 157-00414

Compare

Add to watchlist

Compare

Fixing tie for hole (oval), outside serrated, ⌀1.5-35.0mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) T50SOS-AS-DFTOVAL-E-PA66HIRHS-BK 157-00414

Fixing tie for hole (oval), outside serrated, ⌀2.0-50.0mm, grey, 2000Carton

Compare

T50SOSFT7X12-PA66HIRHS-GY 133-02810

Compare

Add to watchlist

Compare

Fixing tie for hole (oval), outside serrated, ⌀2.0-50.0mm, grey, 2000Carton

Compare

Add to watchlist

2000 Carton

Grey (GY) T50SOSFT7X12-PA66HIRHS-GY 133-02810

Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.

The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.

Compare

T50SST5-PA66HS-BK 126-00332

Compare

Add to watchlist

The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SST5-PA66HS-BK 126-00332

Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 500pcs.

The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.

Compare

T50SST5-PA66-NA 126-00333

Compare

Add to watchlist

The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) T50SST5-PA66-NA 126-00333

Fixing tie for hole (oval), outside serrated, ⌀1.0-30mm, black, 100pcs.

Compare

OS170-PM712-PA66HSUV-BK 126-00131

Compare

Add to watchlist

Compare

Fixing tie for hole (oval), outside serrated, ⌀1.0-30mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) OS170-PM712-PA66HSUV-BK 126-00131

Fixing tie for hole (oval), outside serrated, ⌀1.6-20mm, black, 100pcs.

Compare

OS130-SPM712-PA66HSW-BK 126-00252

Compare

Add to watchlist

Compare

Fixing tie for hole (oval), outside serrated, ⌀1.6-20mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) OS130-SPM712-PA66HSW-BK 126-00252

Fixing tie for hole (oval), ⌀1.6-20mm, black, 500pcs.

Compare

OS130-SPM712-PA66HSW-BK 126-00504

Compare

Add to watchlist

Compare

Fixing tie for hole (oval), ⌀1.6-20mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) OS130-SPM712-PA66HSW-BK 126-00504

Fixing tie for hole (oval), outside serrated, ⌀3.0-22.0mm, natural, 500pcs.

Compare

OS150-PM712-WPJ-PA66HS-NA 126-00165

Compare

Add to watchlist

Compare

Fixing tie for hole (oval), outside serrated, ⌀3.0-22.0mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) OS150-PM712-WPJ-PA66HS-NA 126-00165

Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, black, 500pcs.

Fixing tie with Arrowhead for round hole.

Compare

T50RSFM-PA66HS-BK 126-00123

Compare

Add to watchlist

Fixing tie with Arrowhead for round hole.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50RSFM-PA66HS-BK 126-00123

Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, natural, 500pcs.

Arrowhead disc protects against dirt and other impurities.

Compare

T50SSFM-PA66-NA 126-00069

Compare

Add to watchlist

Arrowhead disc protects against dirt and other impurities.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, natural, 500pcs.

Compare

Add to watchlist

500 bag

Natural (NA) T50SSFM-PA66-NA 126-00069

Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, black, 500pcs.

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

T50SSFM-PA66HS-BK 126-00125

Compare

Add to watchlist

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SSFM-PA66HS-BK 126-00125

Fixing tie for hole (round), inside serrated, ⌀1.6-22.0mm, black, 1000pcs.

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

T18RWPM-PA66-BK 126-00077

Compare

Add to watchlist

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.6-22.0mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) T18RWPM-PA66-BK 126-00077

Fixing tie for hole (round), inside serrated, ⌀1.6-22.0mm, natural, 1000pcs.

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

T18RWPM-PA66-NA 126-00078

Compare

Add to watchlist

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.6-22.0mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) T18RWPM-PA66-NA 126-00078

Fixing tie for hole (round), inside serrated, ⌀1.6-22.0mm, natural, 500pcs.

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

T18RWPM-PA66-NA 126-00347

Compare

Add to watchlist

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.6-22.0mm, natural, 500pcs.

Compare

Add to watchlist

500 pcs.

Natural (NA) T18RWPM-PA66-NA 126-00347

Fixing tie for hole (round), inside serrated, ⌀1.6-44.5mm, natural, 1000pcs.

The arrowhead design of this push mount inserts easily and locks securely in place.

Compare

T50RSF(U)-PA66-NA 126-01011

Compare

Add to watchlist

The arrowhead design of this push mount inserts easily and locks securely in place.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.6-44.5mm, natural, 1000pcs.

Compare

Add to watchlist

1000

Natural (NA) T50RSF(U)-PA66-NA 126-01011

Fixing tie for hole (round), ⌀1.5-48.0mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RT50RSF-PA66W-BK 115-00076

Compare

Add to watchlist

Compare

Fixing tie for hole (round), ⌀1.5-48.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) RT50RSF-PA66W-BK 115-00076

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Compare

T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00172

Compare

Add to watchlist

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Compare

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00172

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Compare

T50ROSFT625SO-PA66HIRHSUV-BK 157-00195

Compare

Add to watchlist

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Compare

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSFT625SO-PA66HIRHSUV-BK 157-00195

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

All-in-one bundling and fastening solution reduces costs and assembly time.

Compare

T50ROSFT8SO12.5R-PA66HIRHSUV-BK 157-00215

Compare

Add to watchlist

All-in-one bundling and fastening solution reduces costs and assembly time.

Compare

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50ROSFT8SO12.5R-PA66HIRHSUV-BK 157-00215

Fixing tie for hole (round), inside serrated, ⌀1.6-50.8mm, grey, 1000pcs.

Compare

T50RTM25E-PA66HIRHS-GY 126-03504

Compare

Add to watchlist

Compare

Fixing tie for hole (round), inside serrated, ⌀1.6-50.8mm, grey, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Grey (GY) T50RTM25E-PA66HIRHS-GY 126-03504

Fixing tie for hole (round), inside serrated, ⌀1.5-50.0mm, black, 1000pcs.

One-piece fir tree mount with cable tie includes protective disc to guard against dirt and other impurities entering the mounting hole.

Compare

T50RTM25-PA66HS-BK 126-03501

Compare

Add to watchlist

One-piece fir tree mount with cable tie includes protective disc to guard against dirt and other impurities entering the mounting hole.

Compare

Fixing tie for hole (round), inside serrated, ⌀1.5-50.0mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) T50RTM25-PA66HS-BK 126-03501

Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Compare

T50SOSFT6LG-E-PA66HS-BK 157-00127

Compare

Add to watchlist

Compare

Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSFT6LG-E-PA66HS-BK 157-00127

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 500pcs.

Fir tree foot parts can be used for a variety of panel thicknesses.

Compare

OS160FT6HEX-PA66HS-BK 157-00081

Compare

Add to watchlist

Fir tree foot parts can be used for a variety of panel thicknesses.

Compare

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) OS160FT6HEX-PA66HS-BK 157-00081

Fixing tie for hole (round), inside serrated, ⌀10.0-40.0mm, black, 100pcs.

FT220DP7-N66-BK.

Compare

FT220DP7-PA66-BK 150-01700

Compare

Add to watchlist

FT220DP7-N66-BK.

Compare

Fixing tie for hole (round), inside serrated, ⌀10.0-40.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) FT220DP7-PA66-BK 150-01700

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.

Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.

Compare

OS170-FT7-PA66-BK 157-00017

Compare

Add to watchlist

Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.

Compare

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) OS170-FT7-PA66-BK 157-00017

Results for "cable-ties-and-fixings" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

‹ › ×