Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
13/10/2025

Results for "hard line high frequency"

10,678 products found 추가 콘텐츠 1개
참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (5295)

Cable Ties Inside Serrated  (1509) Cable Ties Outside Serrated  (99) Cable Ties Without Serration  (42) Cable Ties, Releasable  (39) Cable Ties, Stainless Steel  (228) Cable Ties With Fixing Elements  (1597) Cable Tie Mounts  (374) Fixing Elements  (372) Clips, Clamps and Plugs  (1705)
Cable Ties and Fixings
Cable Ties and Fixings (5295)
Insulation

Insulation  (2687)

Heat Shrink Tubing  (1658) Heat Shrinkable Moulded Shapes  (520) Insulating tubes  (516)
Insulation
Insulation (2687)
Cable Protection Systems

Cable Protection Systems  (1506)

Non-Metallic Conduit Systems  (647) Metallic Conduit Systems  (112) Spiral-Reinforced Conduit Systems  (68) Conduit System Accessories  (31) Protective Tubing and Spiral Binding  (91) Expandable Braided Sleeves  (400) Open Woven Sleeves  (417) Edge Protection  (17) Grommets  (60) Wiring Ducts and Accessories  (80)
Cable Protection Systems
Cable Protection Systems (1506)
Electrical Installation

Electrical Installation  (171)

Downlight Covers  (4) Cable Rods  (3) Electrical Tapes  (87) Cast Resin Technology  (66) Gel Technology  (11)
Electrical Installation
Electrical Installation (171)
Identification Systems

Identification Systems  (888)

Wire and Cable Markers  (488) Control Panel Labelling  (159) Industrial Identification  (246) RFID tags and cable ties  (63) Security Labeling  (27) Hazardous Area Identification  (7) Printers and Software  (99)
Identification Systems
Identification Systems (888)
Application Tooling

Application Tooling  (134)

Automatic Cable Tying System  (27) Application Tooling for Cable Ties  (97) Application Tooling for Snappers  (3) Application Tooling for Heat Shrinkable Tubing  (1) Application Tooling for Non Shrinkable Tubing  (6)
Application Tooling
Application Tooling (134)
Safety Equipment

Safety Equipment  (3)

EasyDoor  (3)
Safety Equipment
Safety Equipment (3)
10,678 개의 제품을
모두 초기화
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory for IWS, grey, 20pcs. (CTCC-IWS29-MB43)
CTCC-IWS corrugated tubing holders.
Compare
Accessory for IWS, grey, 20pcs. (CTCC-IWS29-MB43)
CTCC-IWS29-MB43-PA66/6HIRHS-GY 169-22001
Compare
Add to watchlist
20 pcs.
Grey (GY) CTCC-IWS29-MB43-PA66/6HIRHS-GY 169-22001
Accessory for IWS, grey, 20pcs. (CTCC-IWS37-MB65)
CTCC-IWS corrugated tubing holders.
Compare
Accessory for IWS, grey, 20pcs. (CTCC-IWS37-MB65)
CTCC-IWS37-MB65-PA66/6HIRHS-GY 169-22002
Compare
Add to watchlist
20 pcs.
Grey (GY) CTCC-IWS37-MB65-PA66/6HIRHS-GY 169-22002
Accessory for IWS, grey, 20pcs. (CTCC-IWS50-MB65)
CTCC-IWS corrugated tubing holders.
Compare
Accessory for IWS, grey, 20pcs. (CTCC-IWS50-MB65)
CTCC-IWS50-MB65-PA66/6HIRHS-GY 169-22003
Compare
Add to watchlist
20 pcs.
Grey (GY) CTCC-IWS50-MB65-PA66/6HIRHS-GY 169-22003
Grommet strip, T=2.1 - 3.3mm, W=5.7mm, W2=3.5mm, H=4.3mm, H2=2.7mm, -60 °C to +95 °C, natural, 25m
Flexiform - G51N - PA6 Grommet edging.
Compare
Grommet strip, T=2.1 - 3.3mm, W=5.7mm, W2=3.5mm, H=4.3mm, H2=2.7mm, -60 °C to +95 °C, natural, 25m
G51NC-PA6-NA 251-21309
Compare
Add to watchlist
1 pcs.
Natural (NA) G51NC-PA6-NA 251-21309
Corrugated tube clip for hole (oval), nom⌀28.0mm, black, 500pcs.
Simple and secure installation of pipes or hoses to panels.
Compare
Corrugated tube clip for hole (oval), nom⌀28.0mm, black, 500pcs.
RCC D28-PA66HIRHS-BK 151-00598
Compare
Add to watchlist
500 pcs.
Black (BK) RCC D28-PA66HIRHS-BK 151-00598
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
Fixing element for convoluted tubes 22 mm with arrow head for oval holes 6.2 x 12.2 mm.
Compare
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
RCC D21-PA66HIRHS-BK 150-92300
Compare
Add to watchlist
100 pcs.
Black (BK) RCC D21-PA66HIRHS-BK 150-92300
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
Clip includes an internal rib that spans the inside of the bracket to fit securely into the profile of the tubing to prevent lateral movement and slipping of the tubing.
Compare
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
CTC10FT6LG-PA66HIRHS-BK 151-00018
Compare
Add to watchlist
500 pcs.
Black (BK) CTC10FT6LG-PA66HIRHS-BK 151-00018
Cable grommet, ⌀8.0 mm, black, 2000pcs.
Edge Protection Grommet - HV1215.
Compare
Cable grommet, ⌀8.0 mm, black, 2000pcs.
HV1215-PVC-FR-BK 633-02150
Compare
Add to watchlist
2000 pcs.
Black (BK) HV1215-PVC-FR-BK 633-02150
Cable grommet, ⌀8.0 mm, black, 2000pcs.
Edge Protection Grommet - HV1216.
Compare
Cable grommet, ⌀8.0 mm, black, 2000pcs.
HV1216-PVC-FR-BK 633-02160
Compare
Add to watchlist
2000 pcs.
Black (BK) HV1216-PVC-FR-BK 633-02160
Cable grommet, ⌀6.4 mm, black, 2000pcs.
Edge Protection Grommet - HV1201B.
Compare
Cable grommet, ⌀6.4 mm, black, 2000pcs.
HV1201B-PVC-FR-BK 633-02020
Compare
Add to watchlist
2000 pcs.
Black (BK) HV1201B-PVC-FR-BK 633-02020
Cable grommet, ⌀11.5 mm, black, 200pcs.
Bend Protection Grommet - HV2107.
Compare
Cable grommet, ⌀11.5 mm, black, 200pcs.
HV2107-PVC-FR-BK 632-01070
Compare
Add to watchlist
200 pcs.
Black (BK) HV2107-PVC-FR-BK 632-01070
Cable grommet, ⌀8.0 mm, black, 500pcs.
Bend Protection Grommet - HV2228.
Compare
Cable grommet, ⌀8.0 mm, black, 500pcs.
HV2228-PVC-FR-BK 632-02280
Compare
Add to watchlist
500 pcs.
Black (BK) HV2228-PVC-FR-BK 632-02280
Fitting for corrugated tubing, nom⌀10mm, PG7, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀10mm, PG7, black, 10pcs.
HG10-S-PG7-PA66-BK 166-21010
Compare
Add to watchlist
10 pcs.
Black (BK) HG10-S-PG7-PA66-BK 166-21010
Fitting for corrugated tubing, nom⌀13mm, M12, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀13mm, M12, black, 10pcs.
HG13-S-M12-PA66-BK 166-21022
Compare
Add to watchlist
10 pcs.
Black (BK) HG13-S-M12-PA66-BK 166-21022
Fitting for corrugated tubing, nom⌀16mm, M20, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀16mm, M20, black, 10pcs.
HG16-S-M20-PA66-BK 166-21003
Compare
Add to watchlist
10 pcs.
Black (BK) HG16-S-M20-PA66-BK 166-21003
Fitting for corrugated tubing, nom⌀21mm, PG16, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀21mm, PG16, black, 10pcs.
HG21-S-PG16-PA66-BK 166-21014
Compare
Add to watchlist
10 pcs.
Black (BK) HG21-S-PG16-PA66-BK 166-21014
Fitting for corrugated tubing, nom⌀28mm, PG21, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀28mm, PG21, black, 10pcs.
HG28-S-PG21-PA66-BK 166-21015
Compare
Add to watchlist
10 pcs.
Black (BK) HG28-S-PG21-PA66-BK 166-21015
Fitting for corrugated tubing, nom⌀34mm, M32, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀34mm, M32, black, 10pcs.
HG34-S-M32-PA66-BK 166-21006
Compare
Add to watchlist
10 pcs.
Black (BK) HG34-S-M32-PA66-BK 166-21006
Fitting for corrugated tubing, nom⌀34mm, PG29, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀34mm, PG29, black, 10pcs.
HG34-S-PG29-PA66-BK 166-21016
Compare
Add to watchlist
10 pcs.
Black (BK) HG34-S-PG29-PA66-BK 166-21016
Fitting for corrugated tubing, nom⌀34mm, M40, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀34mm, M40, black, 10pcs.
HG34-S-M40-PA66-BK 166-21028
Compare
Add to watchlist
10 pcs.
Black (BK) HG34-S-M40-PA66-BK 166-21028
Fitting for corrugated tubing, nom⌀54mm, M50, black, 2pcs.
HelaGuard HG-S Straight, IP66.
Compare
Fitting for corrugated tubing, nom⌀54mm, M50, black, 2pcs.
HG54-S-M50-PA66-BK 166-21008
Compare
Add to watchlist
2 pcs.
Black (BK) HG54-S-M50-PA66-BK 166-21008
Fitting for corrugated tubing, nom⌀16mm, M16, black, 10pcs.
HelaGuard HGL-S Straight with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀16mm, M16, black, 10pcs.
HGL16-S-M16-PA66/TPE-BK 166-21601
Compare
Add to watchlist
10 pcs.
Black (BK) HGL16-S-M16-PA66/TPE-BK 166-21601
Fitting for corrugated tubing, nom⌀21mm, M20, black, 10pcs.
HelaGuard HGL-S Straight with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀21mm, M20, black, 10pcs.
HGL21-S-M20-PA66/TPE-BK 166-21603
Compare
Add to watchlist
10 pcs.
Black (BK) HGL21-S-M20-PA66/TPE-BK 166-21603
Fitting for corrugated tubing, nom⌀21mm, PG16, black, 10pcs.
HelaGuard HGL-S Straight with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀21mm, PG16, black, 10pcs.
HGL21-S-PG16-PA66/TPE-BK 166-21611
Compare
Add to watchlist
10 pcs.
Black (BK) HGL21-S-PG16-PA66/TPE-BK 166-21611
Fitting for corrugated tubing, nom⌀42mm, M40, black, 2pcs.
HelaGuard HGL-S Straight with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀42mm, M40, black, 2pcs.
HGL42-S-M40-PA66/TPE-BK 166-21606
Compare
Add to watchlist
2 pcs.
Black (BK) HGL42-S-M40-PA66/TPE-BK 166-21606
Fitting for corrugated tubing, nom⌀18mm, PG13.5, 90°, black, 10pcs.
HelaGuard HG-90 90° Elbow, IP66.
Compare
Fitting for corrugated tubing, nom⌀18mm, PG13.5, 90°, black, 10pcs.
HG18-90-PG13-PA66-BK 166-22226
Compare
Add to watchlist
10 pcs.
Black (BK) HG18-90-PG13-PA66-BK 166-22226
Fitting for corrugated tubing, nom⌀42mm, M50, 90°, black, 2pcs.
HelaGuard HG-90 90° Elbow, IP66.
Compare
Fitting for corrugated tubing, nom⌀42mm, M50, 90°, black, 2pcs.
HG42-90-M50-PA66-BK 166-22223
Compare
Add to watchlist
2 pcs.
Black (BK) HG42-90-M50-PA66-BK 166-22223
Fitting for corrugated tubing, nom⌀54mm, M63, 90°, black, 2pcs.
HelaGuard HG-90 90° Elbow, IP66.
Compare
Fitting for corrugated tubing, nom⌀54mm, M63, 90°, black, 2pcs.
HG54-90-M63-PA66-BK 166-22224
Compare
Add to watchlist
2 pcs.
Black (BK) HG54-90-M63-PA66-BK 166-22224
Fitting for corrugated tubing, nom⌀16mm, M16, 90°, black, 10pcs.
HelaGuard HG-90 90° Elbow, IP66.
Compare
Fitting for corrugated tubing, nom⌀16mm, M16, 90°, black, 10pcs.
HG16-90-M16-PA66-BK 166-22202
Compare
Add to watchlist
10 pcs.
Black (BK) HG16-90-M16-PA66-BK 166-22202
Fitting for corrugated tubing, nom⌀13mm, M16, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀13mm, M16, 90°, black, 10pcs.
HGL13-90-M16-PA66/TPE-BK 166-22800
Compare
Add to watchlist
10 pcs.
Black (BK) HGL13-90-M16-PA66/TPE-BK 166-22800
Fitting for corrugated tubing, nom⌀16mm, M20, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀16mm, M20, 90°, black, 10pcs.
HGL16-90-M20-PA66/TPE-BK 166-22802
Compare
Add to watchlist
10 pcs.
Black (BK) HGL16-90-M20-PA66/TPE-BK 166-22802
Fitting for corrugated tubing, nom⌀16mm, PG11, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀16mm, PG11, 90°, black, 10pcs.
HGL16-90-PG11-PA66/TPE-BK 166-22809
Compare
Add to watchlist
10 pcs.
Black (BK) HGL16-90-PG11-PA66/TPE-BK 166-22809
Fitting for corrugated tubing, nom⌀21mm, M20, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀21mm, M20, 90°, black, 10pcs.
HGL21-90-M20-PA66/TPE-BK 166-22803
Compare
Add to watchlist
10 pcs.
Black (BK) HGL21-90-M20-PA66/TPE-BK 166-22803
Fitting for corrugated tubing, nom⌀21mm, PG16, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀21mm, PG16, 90°, black, 10pcs.
HGL21-90-PG16-PA66/TPE-BK 166-22811
Compare
Add to watchlist
10 pcs.
Black (BK) HGL21-90-PG16-PA66/TPE-BK 166-22811
Fitting for corrugated tubing, nom⌀28mm, M25, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀28mm, M25, 90°, black, 10pcs.
HGL28-90-M25-PA66/TPE-BK 166-22804
Compare
Add to watchlist
10 pcs.
Black (BK) HGL28-90-M25-PA66/TPE-BK 166-22804
Fitting for corrugated tubing, nom⌀28mm, PG21, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀28mm, PG21, 90°, black, 10pcs.
HGL28-90-PG21-PA66/TPE-BK 166-22812
Compare
Add to watchlist
10 pcs.
Black (BK) HGL28-90-PG21-PA66/TPE-BK 166-22812
Fitting for corrugated tubing, nom⌀34mm, M32, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀34mm, M32, 90°, black, 10pcs.
HGL34-90-M32-PA66/TPE-BK 166-22805
Compare
Add to watchlist
10 pcs.
Black (BK) HGL34-90-M32-PA66/TPE-BK 166-22805
Fitting for corrugated tubing, nom⌀34mm, PG29, 90°, black, 10pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀34mm, PG29, 90°, black, 10pcs.
HGL34-90-PG29-PA66/TPE-BK 166-22813
Compare
Add to watchlist
10 pcs.
Black (BK) HGL34-90-PG29-PA66/TPE-BK 166-22813
Fitting for corrugated tubing, nom⌀42mm, M40, 90°, black, 2pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀42mm, M40, 90°, black, 2pcs.
HGL42-90-M40-PA66/TPE-BK 166-22806
Compare
Add to watchlist
2 pcs.
Black (BK) HGL42-90-M40-PA66/TPE-BK 166-22806
Fitting for corrugated tubing, nom⌀42mm, PG36, 90°, black, 2pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀42mm, PG36, 90°, black, 2pcs.
HGL42-90-PG36-PA66/TPE-BK 166-22814
Compare
Add to watchlist
2 pcs.
Black (BK) HGL42-90-PG36-PA66/TPE-BK 166-22814
Fitting for corrugated tubing, nom⌀54mm, M50, 90°, black, 2pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀54mm, M50, 90°, black, 2pcs.
HGL54-90-M50-PA66/TPE-BK 166-22807
Compare
Add to watchlist
2 pcs.
Black (BK) HGL54-90-M50-PA66/TPE-BK 166-22807
Fitting for corrugated tubing, nom⌀54mm, PG48, 90°, black, 2pcs.
HelaGuard HGL-90 90° Elbow with conduit seal, IP68.
Compare
Fitting for corrugated tubing, nom⌀54mm, PG48, 90°, black, 2pcs.
HGL54-90-PG48-PA66/TPE-BK 166-22815
Compare
Add to watchlist
2 pcs.
Black (BK) HGL54-90-PG48-PA66/TPE-BK 166-22815
Metallic conduit, with PVC coating, nom⌀40mm, OD=44.2mm, ID=37.6mm, black, 25m
HelaGuard PCS - PVC Coated Galvanized Steel Conduit.
Compare
Metallic conduit, with PVC coating, nom⌀40mm, OD=44.2mm, ID=37.6mm, black, 25m
PCS40-GS/PVC-BK 166-30706
Compare
Add to watchlist
25 metre
Black (BK) PCS40-GS/PVC-BK 166-30706
Metallic conduit, with smooth PVC coating, nom⌀12mm, OD=14.2mm, ID=10.0mm, black, 25m
HelaGuard LTS - PVC Coated Liquid Tight Galvanized Steel Conduit.
Compare
Metallic conduit, with smooth PVC coating, nom⌀12mm, OD=14.2mm, ID=10.0mm, black, 25m
LTS12-GS/PVC-BK 166-31901
Compare
Add to watchlist
25 metre
Black (BK) LTS12-GS/PVC-BK 166-31901
Metallic conduit, with smooth PVC coating, nom⌀40mm, OD=41.8mm, ID=35.4mm, black, 25m
HelaGuard LTS - PVC Coated Liquid Tight Galvanized Steel Conduit.
Compare
Metallic conduit, with smooth PVC coating, nom⌀40mm, OD=41.8mm, ID=35.4mm, black, 25m
LTS40-GS/PVC-BK 166-31906
Compare
Add to watchlist
25 metre
Black (BK) LTS40-GS/PVC-BK 166-31906
Metallic conduit, with smooth PVC coating, nom⌀63mm, OD=59.7mm, ID=51.6mm, black, 10m
HelaGuard LTS - PVC Coated Liquid Tight Galvanized Steel Conduit.
Compare
Metallic conduit, with smooth PVC coating, nom⌀63mm, OD=59.7mm, ID=51.6mm, black, 10m
LTS63-GS/PVC-BK 166-31908
Compare
Add to watchlist
10 metre
Black (BK) LTS63-GS/PVC-BK 166-31908
Metallic conduit, with smooth TPR coating, nom⌀16mm, OD=17.8mm, ID=12.6mm, black, 25m
HelaGuard LTSH.
Compare
Metallic conduit, with smooth TPR coating, nom⌀16mm, OD=17.8mm, ID=12.6mm, black, 25m
LTSH16-GS/TPR-BK 166-32002
Compare
Add to watchlist
25 metre
Black (BK) LTSH16-GS/TPR-BK 166-32002
Metallic conduit, with smooth TPR coating, nom⌀25mm, OD=26.4mm, ID=21.1mm, black, 25m
HelaGuard LTSH.
Compare
Metallic conduit, with smooth TPR coating, nom⌀25mm, OD=26.4mm, ID=21.1mm, black, 25m
LTSH25-GS/TPR-BK 166-32004
Compare
Add to watchlist
25 metre
Black (BK) LTSH25-GS/TPR-BK 166-32004
Metallic conduit, with smooth TPR coating, nom⌀32mm, OD=33.1mm, ID=26.5mm, black, 25m
HelaGuard LTSH.
Compare
Metallic conduit, with smooth TPR coating, nom⌀32mm, OD=33.1mm, ID=26.5mm, black, 25m
LTSH32-GS/TPR-BK 166-32005
Compare
Add to watchlist
25 metre
Black (BK) LTSH32-GS/TPR-BK 166-32005
Fixing tie for edge, inside serrated, ⌀1.0-20.0mm, black, 5000Set
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
Fixing tie for edge, inside serrated, ⌀1.0-20.0mm, black, 5000Set
T18REC21SET-PA66HS/PA66HIRHS-BK 156-00179
Compare
Add to watchlist
5000 Set
Black (BK) T18REC21SET-PA66HS/PA66HIRHS-BK 156-00179
Cable tie not serrated vibration absorbing, 38.0x11.7mm, black, 200pcs.
Cable Tie Mounts KR8
Compare
Cable tie not serrated vibration absorbing, 38.0x11.7mm, black, 200pcs.
KR8/C5-PA66W-BK 121-58560
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
200 pcs.
Black (BK) KR8/C5-PA66W-BK 121-58560
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie not serrated, 50.0mx8.0mm, black, 50.0m
Cable tie KR8S1.
Compare
Cable tie not serrated, 50.0mx8.0mm, black, 50.0m
KR8/S1-PA66W-BK 121-98160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 reel
Black (BK) KR8/S1-PA66W-BK 121-98160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀3.0-35.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀3.0-35.0mm, blue, 100pcs.
MCTPP30R-PPMD-BU 111-01665
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP30R-PPMD-BU 111-01665
Cable tie inside serrated detectable, 100.0x2.4mm, ⌀1.5-22.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 100.0x2.4mm, ⌀1.5-22.0mm, blue, 100pcs.
MCTPP18R-PPMD-BU 111-01664
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTPP18R-PPMD-BU 111-01664
Cable tie inside serrated detectable, 201x4.7mm, ⌀10-50mm, blue, 100pcs.
MCTPP ties have a high chemical and temperature resistance.
Compare
Cable tie inside serrated detectable, 201x4.7mm, ⌀10-50mm, blue, 100pcs.
MCTS200-PPMD-BU 111-01386
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTS200-PPMD-BU 111-01386
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.0 mm/6.35 mm (hexagonal), ⌀6.35 mm, #1/4" (M6) Screw, grey, 500pcs.
Separates bundles from wear and chafing, providing additional longevity.
Compare
Cable tie mount for screw fixation, Wmax=13.5mm, ⌀6.0 mm/6.35 mm (hexagonal), ⌀6.35 mm, #1/4" (M6) Screw, grey, 500pcs.
S2CM25-PA66HIRHS-GY 151-29400
Compare
Add to watchlist
500 pcs.
Grey (GY) S2CM25-PA66HIRHS-GY 151-29400
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
SAM83-PA66HIRHS-GY 151-29600
Compare
Add to watchlist
500 pcs.
Grey (GY) SAM83-PA66HIRHS-GY 151-29600
Braided sleeving, abrasion resistant, nom⌀50mm, ⌀40-55mm, black, 50m
HEGPA66 - Extreme abrasion protection sleeve.
Compare
Braided sleeving, abrasion resistant, nom⌀50mm, ⌀40-55mm, black, 50m
HEGPA6650-PA66-BK 170-45000
Compare
Add to watchlist
50 metre
Black (BK) HEGPA6650-PA66-BK 170-45000
Braided sleeving, abrasion resistant, nom⌀60mm, ⌀50-65mm, black, 50m
HEGPA66 - Extreme abrasion protection sleeve.
Compare
Braided sleeving, abrasion resistant, nom⌀60mm, ⌀50-65mm, black, 50m
HEGPA6660-PA66-BK 170-46000
Compare
Add to watchlist
50 metre
Black (BK) HEGPA6660-PA66-BK 170-46000
Stainless steel cable tie, ball bearing lock, 362x7.9mm, ⌀17.0-102mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 362x7.9mm, ⌀17.0-102mm, metal, 50pcs.
MBT14HS-SS304-ML 111-01941
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT14HS-SS304-ML 111-01941
Stainless steel cable tie, ball bearing lock, 127x4.6mm, ⌀12-25mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 127x4.6mm, ⌀12-25mm, metal, 100pcs.
MBT5SS-SS304-ML 111-02343
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT5SS-SS304-ML 111-02343
Stainless steel cable tie, ball bearing lock, 201x7.9mm, ⌀17.0-50mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 201x7.9mm, ⌀17.0-50mm, metal, 50pcs.
MBT8HS-SS304-ML 111-02345
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT8HS-SS304-ML 111-02345
Stainless steel cable tie, ball bearing lock, 201x4.6mm, ⌀12-50mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 201x4.6mm, ⌀12-50mm, metal, 100pcs.
MBT8SS-SS304-ML 111-01938
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT8SS-SS304-ML 111-01938
Stainless steel cable tie, ball bearing lock, 362x7.9mm, ⌀17.0-102mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 362x7.9mm, ⌀17.0-102mm, metal, 50pcs.
MBT14H-SS316-ML 111-01948
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT14H-SS316-ML 111-01948
Stainless steel cable tie, ball bearing lock, 521x4.6mm, ⌀12-152mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 521x4.6mm, ⌀12-152mm, metal, 100pcs.
MBT20S-SS316-ML 111-01946
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT20S-SS316-ML 111-01946
Stainless steel cable tie, ball bearing lock, 838.0x12.3mm, ⌀12.0-254.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 838.0x12.3mm, ⌀12.0-254.0mm, metal, 50pcs.
MBT33XH-SS316L-ML 111-95339
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33XH-SS316L-ML 111-95339
Stainless steel cable tie, ball bearing lock, 127x4.6mm, ⌀12-25mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 127x4.6mm, ⌀12-25mm, metal, 100pcs.
MBT5S-SS316-ML 111-01943
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT5S-SS316-ML 111-01943
Stainless steel cable tie, ball bearing lock, 201x7.9mm, ⌀17.0-50mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 201x7.9mm, ⌀17.0-50mm, metal, 50pcs.
MBT8H-SS316-ML 111-02338
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT8H-SS316-ML 111-02338
Stainless steel cable tie, ball bearing lock, 201x4.6mm, ⌀12-50mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Stainless steel cable tie, ball bearing lock, 201x4.6mm, ⌀12-50mm, metal, 100pcs.
MBT8S-SS316-ML 111-01944
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT8S-SS316-ML 111-01944
Stainless steel cable tie, punch lock, 207x5.9mm, ⌀5-50.0mm, metal, 100pcs.
Metal cable ties MST-Series.
Compare
Stainless steel cable tie, punch lock, 207x5.9mm, ⌀5-50.0mm, metal, 100pcs.
MST200S-SS304-ML 111-01549
Compare
Add to watchlist
100 pcs.
Metal (ML) MST200S-SS304-ML 111-01549
Stainless steel cable tie, punch lock, 360x5.9mm, ⌀5-100mm, metal, 100pcs.
Metal cable ties MST-Series.
Compare
Stainless steel cable tie, punch lock, 360x5.9mm, ⌀5-100mm, metal, 100pcs.
MST360S-SS304-ML 111-01550
Compare
Add to watchlist
100 pcs.
Metal (ML) MST360S-SS304-ML 111-01550
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 31.75x25.40mm, H2=149.86mm, 1000pcs.
Helatag 896 offers an excellent protection against abrasion and environmental impact.
Compare
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 31.75x25.40mm, H2=149.86mm, 1000pcs.
TAG107TD3-896-CL/WH 596-10789
Compare
Add to watchlist
1000 reel
White (WH), Transparent (CL) TAG107TD3-896-CL/WH 596-10789
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 19.05x49.53mm, H2=57.10mm, 1000pcs.
Helatag 896 offers an excellent protection against abrasion and environmental impact.
Compare
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 19.05x49.53mm, H2=57.10mm, 1000pcs.
TAG10TD2-896-CL/WH 596-10896
Compare
Add to watchlist
1000 reel
White (WH), Transparent (CL) TAG10TD2-896-CL/WH 596-10896
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 12.70x50.80mm, H2=36.50mm, 1000pcs.
Helatag 896 offers an excellent protection against abrasion and environmental impact.
Compare
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 12.70x50.80mm, H2=36.50mm, 1000pcs.
TAG24TD1-896-CL/WH 596-24896
Compare
Add to watchlist
1000 reel
White (WH), Transparent (CL) TAG24TD1-896-CL/WH 596-24896
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 12.70x12.70mm, H2=36.50mm, 5000pcs.
Helatag 896 offers an excellent protection against abrasion and environmental impact.
Compare
Cable label, self laminating, self-laminating/chemical resistance, white/transparent, thermal transfer print, 12.70x12.70mm, H2=36.50mm, 5000pcs.
TAG2TD6-896-CL/WH 596-02896
Compare
Add to watchlist
5000 reel
White (WH), Transparent (CL) TAG2TD6-896-CL/WH 596-02896
Warning label, pre-printed, L=100.00mm, yellow, pack=30pcs.
Compare
Warning label, pre-printed, L=100.00mm, yellow, pack=30pcs.
WS4-A-150-YE 597-64200
Compare
Add to watchlist
1 pack
Yellow (YE) WS4-A-150-YE 597-64200
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
Manual tensioning tool EVO9i.
Compare
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
EVO9i-MET/PL-BU/GY 110-88004
Compare
Add to watchlist
1 pc.
Blue (BU), Grey (GY) EVO9i-MET/PL-BU/GY 110-88004
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
Manual tensioning tool EVO 9i.
Compare
Cable tie tool for 4.6 - 13.5mm, manual, 0.373kg, blue/grey
EVO9iSP-MET/PL-BU/GY 110-88005
Compare
Add to watchlist
1 pc.
Blue (BU), Grey (GY) EVO9iSP-MET/PL-BU/GY 110-88005
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01342
Compare
Add to watchlist
500
Black (BK) T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01342
Heat Shrinkable Tubing 2:1 (3.2/1.6) black
Compare
Heat Shrinkable Tubing 2:1 (3.2/1.6) black
PST-H-3.2/1.6-POA-BK 342-20320
Compare
Add to watchlist
400 metre
Black (BK) PST-H-3.2/1.6-POA-BK 342-20320
Heat Shrinkable Tubing 2:1 (51/25.4) black
Compare
Heat Shrinkable Tubing 2:1 (51/25.4) black
PST-H-51.0/25.4-POA-BK 342-25080
Compare
Add to watchlist
1 metre
Black (BK) PST-H-51.0/25.4-POA-BK 342-25080
Heat shrinkable tubing 2:1 (3.2/1.2 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Compare
Heat shrinkable tubing 2:1 (3.2/1.2 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20-3.2/1.2-PO-X-BK 300-73140
Compare
Add to watchlist
300 metre
Black (BK) TCN20-3.2/1.2-PO-X-BK 300-73140
Heat shrinkable tubing 2:1 (25.4/9.5 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Compare
Heat shrinkable tubing 2:1 (25.4/9.5 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20-25.4/9.5-PO-X-BK 300-73200
Compare
Add to watchlist
60 metre
Black (BK) TCN20-25.4/9.5-PO-X-BK 300-73200
Heat Shrinkable Tubing 3:1 black in blister bags 3/1
HIS-3 bag 3:1 black.
Compare
Heat Shrinkable Tubing 3:1 black in blister bags 3/1
HIS-3-BAG-3/1-PO-X-BK 308-30310
Compare
Add to watchlist
10 pack
Black (BK) HIS-3-BAG-3/1-PO-X-BK 308-30310
Heat Shrinkable Tubing 3:1 blue in blister bags 3/1
HIS-3 bag 3:1 blue, width 112.
Compare
Heat Shrinkable Tubing 3:1 blue in blister bags 3/1
HIS-3-BAG-3/1-PO-X-BU 308-30312
Compare
Add to watchlist
10 bag
Blue (BU) HIS-3-BAG-3/1-PO-X-BU 308-30312
Heat Shrinkable Tubing 3:1 transparent in blister bags 3/1
HIS-3 bag 3:1 transparent, width 112.
Compare
Heat Shrinkable Tubing 3:1 transparent in blister bags 3/1
HIS-3-BAG-3/1-PO-X-CL 308-30315
Compare
Add to watchlist
10 bag
Transparent (CL) HIS-3-BAG-3/1-PO-X-CL 308-30315
Heat Shrinkable Tubing 3:1 green/yellow in blister bags 3/1
HIS-3 bag 3:1 green-yellow.
Compare
Heat Shrinkable Tubing 3:1 green/yellow in blister bags 3/1
HIS-3-BAG-3/1-PO-X-GNYE 308-30316
Compare
Add to watchlist
10 bag
Green-Yellow (GNYE) HIS-3-BAG-3/1-PO-X-GNYE 308-30316
Heat Shrinkable Tubing 3:1 black in blister bags 6/2
HIS-3 bag 6:2 black.
Compare
Heat Shrinkable Tubing 3:1 black in blister bags 6/2
HIS-3-BAG-6/2-PO-X-BK 308-30610
Compare
Add to watchlist
10 pack
Black (BK) HIS-3-BAG-6/2-PO-X-BK 308-30610
Heat Shrinkable Tubing 3:1 red in blister bags 6/2
HIS-3 bag 6:2 red, width 112.
Compare
Heat Shrinkable Tubing 3:1 red in blister bags 6/2
HIS-3-BAG-6/2-PO-X-RD 308-30611
Compare
Add to watchlist
10 bag
Red (RD) HIS-3-BAG-6/2-PO-X-RD 308-30611
YouTube  LinkedIn  Link Corporate Blog 
문의하기 법적고지 저작권고지 지침 및 책무 개인정보 보호 정책 뉴스레터 사이트맵
업데이트: 05/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.288.1) | 업데이트: 05/10/2025 | 개인 정보 설정
문의