Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
31/10/2025

Results for "cable holder"

1,108 products found 6 further hits
There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (995)

Cable Ties, Stainless Steel  (31) Cable Ties With Fixing Elements  (658) Cable Tie Mounts  (10) Fixing Elements  (34) Clips, Clamps and Plugs  (565)
Cable Ties and Fixings
Cable Ties and Fixings (995)
Cable Protection Systems

Cable Protection Systems  (45)

Conduit System Accessories  (8) Protective Tubing and Spiral Binding  (16) Wiring Ducts and Accessories  (37)
Cable Protection Systems
Cable Protection Systems (45)
Identification Systems

Identification Systems  (78)

Control Panel Labelling  (43) Industrial Identification  (47) Hazardous Area Identification  (31)
Identification Systems
Identification Systems (78)
Application Tooling

Application Tooling  (25)

Automatic Cable Tying System  (25)
Application Tooling
Application Tooling (25)
1,108 products
Reset all
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Compare
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T50SSBS5OT-E-PA66HS-BK 157-00207
Compare
Add to watchlist
500 pcs.
Black (BK) T50SSBS5OT-E-PA66HS-BK 157-00207
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
This outside serrated cable tie with weld stud mounting keeps the cables close to the fixing stud.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSSBS5E-PA66HS-BK 157-00210
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSBS5E-PA66HS-BK 157-00210
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
Compare
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
SBT120-M12-PA66HSUV-BK 157-00021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) SBT120-M12-PA66HSUV-BK 157-00021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Compare
Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.
QGDHC5.2-8.0M-PA66W-BK 151-04088
Compare
Add to watchlist
50 pcs.
Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088
Connector clip, EWCAP-005-11, black, 1000pcs.
Compare
Connector clip, EWCAP-005-11, black, 1000pcs.
CC11VEC6-PA66HIRHS-BK 151-02568
Compare
Add to watchlist
1000 pcs.
Black (BK) CC11VEC6-PA66HIRHS-BK 151-02568
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG Clamps.
Compare
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Compare
Add to watchlist
500 pcs.
Blue (BU) CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
CTC8FT6-PA66HIRHS-BK 151-01543
Compare
Add to watchlist
500 pcs.
Black (BK) CTC8FT6-PA66HIRHS-BK 151-01543
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀16.0mm, black, 2000pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀16.0mm, black, 2000pcs.
CTC16FT8-PA66HS-BK 151-02577
Compare
Add to watchlist
2000 pcs.
Black (BK) CTC16FT8-PA66HS-BK 151-02577
Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black
Compare
Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black
AHC25FT6LG-PA66HIRHS-BK 151-01198
Compare
Add to watchlist
1300 pcs.
Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 500pcs.
1-piece fixing tie for weld stud T5. The T50SOSWSP5E is stackable due to the design.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 500pcs.
T50SOSWSP5E-PA46-GY 157-00230
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SOSWSP5E-PA46-GY 157-00230
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M10-PA66HSW-GY 157-00067
Compare
Add to watchlist
100 pcs.
Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.
T50SVCOC10-14-PA46-GY 156-01045
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SVCOC10-14-PA46-GY 156-01045
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-02005
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-02005
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVC6.5-PA66HS/PA66HIRHS-BK 156-02006
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC6.5-PA66HS/PA66HIRHS-BK 156-02006
Fixing tie with pipe/tube holder, inside serrated, ⌀35.0mm, grey, 500pcs.
T50SVC5 rotates in any direction.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀35.0mm, grey, 500pcs.
T50SVC6.5-PA46-GY 156-00937
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SVC6.5-PA46-GY 156-00937
Fixing tie with pipe/tube holder, ⌀2-35mm, black, 250pcs.
T50SMVCOC19-24,5 rotates in any direction.
Compare
Fixing tie with pipe/tube holder, ⌀2-35mm, black, 250pcs.
T50SVCOC25-31-PA66HS/PA66HIRHS-BK 156-01230
Compare
Add to watchlist
250 pcs.
Black (BK) T50SVCOC25-31-PA66HS/PA66HIRHS-BK 156-01230
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVC3.5-PA66HS/PA66HIRHS-BK 156-00791
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC3.5-PA66HS/PA66HIRHS-BK 156-00791
Fixing tie with pipe/tube holder, ⌀2-35mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀2-35mm, black, 500pcs.
T50SVCOC9-11A-PA66HS/PA66HIRHS-BK 156-01419
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC9-11A-PA66HS/PA66HIRHS-BK 156-01419
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
WSI250-PA66HIRHSUV-BK 157-00401
Compare
Add to watchlist
300 pcs.
Black (BK) WSI250-PA66HIRHSUV-BK 157-00401
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
WSR250-PA66HIRHSUV-BK 157-00402
Compare
Add to watchlist
300 pcs.
Black (BK) WSR250-PA66HIRHSUV-BK 157-00402
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
WSS8MM-PA66HIRHSW-BK 157-00034
Compare
Add to watchlist
300 pcs.
Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
Head allows for a 0.2
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151
Compare
Add to watchlist
1000 bag
Grey (GY) T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151
Fixing tie for stud, ⌀2.0-50.0mm, black, 3000pcs.
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
Fixing tie for stud, ⌀2.0-50.0mm, black, 3000pcs.
T50ROSLPM6SMSO25-PA66HIRHSUV-BK 157-00335
Compare
Add to watchlist
3000 pcs.
Black (BK) T50ROSLPM6SMSO25-PA66HIRHSUV-BK 157-00335
Fixing tie for stud, ⌀3.5-50.0mm, black, 2000
Low-profile head allows mounts to stack, providing more mounting versatility from a single stud.
Compare
Fixing tie for stud, ⌀3.5-50.0mm, black, 2000
T80ROSLPSB8U-PA66HIRHSUV-BK 157-00340
Compare
Add to watchlist
2000 pcs.
Black (BK) T80ROSLPSB8U-PA66HIRHSUV-BK 157-00340
Fixing tie for stud, ⌀3.5-50.0mm, black, 2500pcs.
Low-profile head allows mounts to stack, providing more mounting versatility from a single stud.
Compare
Fixing tie for stud, ⌀3.5-50.0mm, black, 2500pcs.
T80ROSLPSB5-6U-PA66HIRHSUV-BK 157-00460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Compare
Add to watchlist
2500 bag
Black (BK) T80ROSLPSB5-6U-PA66HIRHSUV-BK 157-00460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Fixing tie for stud, ⌀5.0-50.0mm, brown, 2500pcs.
Compare
Fixing tie for stud, ⌀5.0-50.0mm, brown, 2500pcs.
T80ROSLPSB5-6U-PA46-BN 157-00476
Compare
Add to watchlist
2500 pcs.
Brown (BN) T80ROSLPSB5-6U-PA46-BN 157-00476
Fixing tie for stud, ⌀3.5-50.0mm, orange, 2500pcs.
Compare
Fixing tie for stud, ⌀3.5-50.0mm, orange, 2500pcs.
T80ROSLPSB5-6U-PA66HIRHS-OG 157-04015
Compare
Add to watchlist
2500 bag
Orange (OG), High Voltage (HV) T80ROSLPSB5-6U-PA66HIRHS-OG 157-04015
Fixing tie with pipe/tube holder, ⌀35.0mm, natural, 500pcs.
Fixing tie for multiple routing and post-installation of bundles.
Compare
Fixing tie with pipe/tube holder, ⌀35.0mm, natural, 500pcs.
Bracket brake line-PA66HS-NA 148-00100
Compare
Add to watchlist
500 pcs.
Natural (NA) Bracket brake line-PA66HS-NA 148-00100
Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.
Compare
Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.
ATSFT6LG-PA66HIRHS-BK 102-67062
Compare
Add to watchlist
2000 pcs.
Black (BK) ATSFT6LG-PA66HIRHS-BK 102-67062
Label, yellow, thermal transfer print, 30x60mm, 500pcs.
Helatag 1222 Series, yellow panel plate labels.
Compare
Label, yellow, thermal transfer print, 30x60mm, 500pcs.
TAG60-30TDK1-1222-YE 596-00726
Compare
Add to watchlist
500 reel
Yellow (YE) TAG60-30TDK1-1222-YE 596-00726
Label, red, thermal transfer print, 45x90mm, 500pcs.
Helatag 1224 Series, red panel plate labels.
Compare
Label, red, thermal transfer print, 45x90mm, 500pcs.
TAG90-45TDK1-1224-RD 596-00732
Compare
Add to watchlist
500 reel
Red (RD) TAG90-45TDK1-1224-RD 596-00732
Label, red, thermal transfer print, 18.0mm, 25m
Continuous red panel plate labels from the Helatag 1224 series.
Compare
Label, red, thermal transfer print, 18.0mm, 25m
TAGR18TDK1-1224-RD 596-00702
Compare
Add to watchlist
25 metre
Red (RD) TAGR18TDK1-1224-RD 596-00702
Label, orange, thermal transfer print, 18.0mm, 25m
Helatag 1225 - continuous orange panel plate labels with a high performance adhesive.
Compare
Label, orange, thermal transfer print, 18.0mm, 25m
TAGR18TDK1-1225-OG 596-00703
Compare
Add to watchlist
25 metre
Orange (OG) TAGR18TDK1-1225-OG 596-00703
Shuttle Module S-A 1 - Shuttle Set-ST-ML
Compare
Shuttle Module S-A 1 - Shuttle Set-ST-ML
Shuttle Module S-A 1 - Shuttle Set-ST-ML 920-90156
Compare
Add to watchlist
Metal (ML) Shuttle Module S-A 1 - Shuttle Set-ST-ML 920-90156
Shuttle Module S-A 2 - Gripper Set-ST-ML
Compare
Shuttle Module S-A 2 - Gripper Set-ST-ML
Shuttle Module S-A 2 - Gripper Set-ST-ML 920-90157
Compare
Add to watchlist
Metal (ML) Shuttle Module S-A 2 - Gripper Set-ST-ML 920-90157
Shuttle Module S-A 3 - Y Slide Assembly-ST-ML
Compare
Shuttle Module S-A 3 - Y Slide Assembly-ST-ML
Shuttle Module S-A 3 - Y Slide Assembly-ST-ML 920-90158
Compare
Add to watchlist
Metal (ML) Shuttle Module S-A 3 - Y Slide Assembly-ST-ML 920-90158
Shuttle Module S-A 4 - Pick & Place Carrier 1-ST-ML
Compare
Shuttle Module S-A 4 - Pick & Place Carrier 1-ST-ML
Shuttle Module S-A 4 - Pick & Place Carrier 1-ST-ML 920-90159
Compare
Add to watchlist
Metal (ML) Shuttle Module S-A 4 - Pick & Place Carrier 1-ST-ML 920-90159
Shuttle Module S-A 5 - Y Slide Assembly 01-ST-ML
Compare
Shuttle Module S-A 5 - Y Slide Assembly 01-ST-ML
Shuttle Module S-A 5 - Y Slide Assembly 01-ST-ML 920-90160
Compare
Add to watchlist
Metal (ML) Shuttle Module S-A 5 - Y Slide Assembly 01-ST-ML 920-90160
Structure Module S-A 1 PC Triggering Module-ST-ML
Compare
Structure Module S-A 1 PC Triggering Module-ST-ML
Structure Module S-A 1 PC Triggering Module-ST-ML 920-90221
Compare
Add to watchlist
Metal (ML) Structure Module S-A 1 PC Triggering Module-ST-ML 920-90221
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm, nom⌀=15.0 mm - 19.00 mm
Open Pipe Clip LOC15-19FTOVAL.
Compare
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm, nom⌀=15.0 mm - 19.00 mm
LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049
Compare
Add to watchlist
1000 pcs.
Black (BK) LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=5.0mm, Dmax=9.0mm
Compare
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=5.0mm, Dmax=9.0mm
LOC5-9FTOVAL-PA66HIRHS-OG 151-03458
Compare
Add to watchlist
1700
Orange (OG), High Voltage (HV) LOC5-9FTOVAL-PA66HIRHS-OG 151-03458
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 5.5mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=20.0mm, Dmax=25.0mm, nom⌀=20.0 mm - 25.0 mm
Non-rotating fir tree provides easy insertion with high extraction resistance.
Compare
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 5.5mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=20.0mm, Dmax=25.0mm, nom⌀=20.0 mm - 25.0 mm
LOC20-25FTOVAL-PA66HIRHSUV-BK 151-02536
Compare
Add to watchlist
1000 pcs.
Black (BK) LOC20-25FTOVAL-PA66HIRHSUV-BK 151-02536
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 mm - 14.0 mm
LOC-Series, Fir tree mount for oval holes (9 x 12mm).
Compare
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 mm - 14.0 mm
LOC10-14FTOVAL-PA66HIRHSUV-BK 151-02552
Compare
Add to watchlist
1000 pcs.
Black (BK) LOC10-14FTOVAL-PA66HIRHSUV-BK 151-02552
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm
Compare
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm
MOC12FTOVAL-PA66HIRHSUV-BK 151-01759
Compare
Add to watchlist
2000 pcs.
Black (BK) MOC12FTOVAL-PA66HIRHSUV-BK 151-01759
Fixing tie with pipe/tube holder, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
RB8-PA66-NA 151-14089
Compare
Add to watchlist
5000 pcs.
Natural (NA) RB8-PA66-NA 151-14089
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14-PA66-BK 151-00502
Compare
Add to watchlist
200 pcs.
Black (BK) RB14-PA66-BK 151-00502
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Compare
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1A-PA66HS/PA66HIRHS-BK 156-00767
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00767
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.
T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137
Compare
Add to watchlist
250 pcs.
Black (BK) T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.
T50SVCOC/T50SMVCOC
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.
T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303
Compare
Add to watchlist
250 pcs.
Black (BK) T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01342
Compare
Add to watchlist
500
Black (BK) T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-01342
Fixing tie with pipe/tube holder, ⌀50.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀50.0mm, black, 500pcs.
T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-02008
Compare
Add to watchlist
500 pcs.
Black (BK) T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-02008
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 200pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 200pcs.
T50SMVCOC39-45-PA66HS/PA66HIRHS-BK 156-01537
Compare
Add to watchlist
200 pcs.
Black (BK) T50SMVCOC39-45-PA66HS/PA66HIRHS-BK 156-01537
Fixing tie with pipe/tube holder, ⌀5.0-9.0mm, black, 1000pcs.
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Compare
Fixing tie with pipe/tube holder, ⌀5.0-9.0mm, black, 1000pcs.
T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for cable bundles/with pipe/tube holder, ⌀1.0-35.0mm, black, 500pcs.
T50SVC5 rotates in any direction.
Compare
Fixing tie for cable bundles/with pipe/tube holder, ⌀1.0-35.0mm, black, 500pcs.
T50SVC5-PA66HS-BK 156-00772
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC5-PA66HS-BK 156-00772
Fixing tie for cable bundles/with pipe/tube holder, ⌀1.0-35.0mm, black, 500pcs.
All-in-one bundling and mounting solution reduces costs.
Compare
Fixing tie for cable bundles/with pipe/tube holder, ⌀1.0-35.0mm, black, 500pcs.
T50SVC5-PA66HIRHSUV/PA66HS-BK 156-02535
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC5-PA66HIRHSUV/PA66HS-BK 156-02535
Fixing tie with pipe/tube holder, ⌀4.0-45.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1B-PA66HS/PA66HIRHS-BK 156-01145
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROC1B-PA66HS/PA66HIRHS-BK 156-01145
Fixing tie with pipe/tube holder, ⌀4.0-31.0mm, natural/black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀4.0-31.0mm, natural/black, 500pcs.
T30ROC2B-PA46/PA66HIRHS-NA/BK 156-00838
Compare
Add to watchlist
500 pcs.
Natural (NA), Black (BK) T30ROC2B-PA46/PA66HIRHS-NA/BK 156-00838
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Usable for one bolt and stackable for multiple routing and guiding cables and wires in different directions.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSWSP5E-PA66HS-BK 157-00209
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSWSP5E-PA66HS-BK 157-00209
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M6-PA66HSUV-BK 157-00038
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M8-PA66HSW-BK 157-00039
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M10-PA66HSW-BK 157-00040
Compare
Add to watchlist
100 pcs.
Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M6-PA66HSUV-GY 157-00065
Compare
Add to watchlist
100 pcs.
Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Compare
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8-PA66HSW-GY 157-00066
Compare
Add to watchlist
100 pcs.
Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000
T50ROSLPM8SMSO25-PA46-BN 157-00361
Compare
Add to watchlist
2000 pcs.
Brown (BN) T50ROSLPM8SMSO25-PA46-BN 157-00361
Fixing tie for stud, ⌀2.0-50.0mm, black, 2000
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
Fixing tie for stud, ⌀2.0-50.0mm, black, 2000
T50ROSLPM8SMSO25-PA66HIRHSUV-BK 157-00362
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROSLPM8SMSO25-PA66HIRHSUV-BK 157-00362
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Compare
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB100M-PA66HS-BK 150-29100
Compare
Add to watchlist
500 pcs.
Black (BK) FBB100M-PA66HS-BK 150-29100
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Compare
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB185M-PA66HS-BK 150-29180
Compare
Add to watchlist
500 pcs.
Black (BK) FBB185M-PA66HS-BK 150-29180
Fixing tie for stud, inside serrated, ⌀6.0-26.0mm, black, 560pcs.
LFC165-2 for bundle diameters up to 35.0 mm.
Compare
Fixing tie for stud, inside serrated, ⌀6.0-26.0mm, black, 560pcs.
LFC155-PA66-BK 131-60070
Compare
Add to watchlist
560 pcs.
Black (BK) LFC155-PA66-BK 131-60070
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S for M8 threaded studs.
Compare
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S-PA46-GY 131-60058
Compare
Add to watchlist
500 pcs.
Grey (GY) SBR8S-PA46-GY 131-60058
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
WSS250-PA66HIRHSUV-BK 157-00400
Compare
Add to watchlist
300 pcs.
Black (BK) WSS250-PA66HIRHSUV-BK 157-00400
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 3000pcs.
Head allows for a 0.2
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 3000pcs.
T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00105
Compare
Add to watchlist
3000 bag
Black (BK) T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00105
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
The fixing tie T50SOSSB5-High-E-C-CC for fixation on weld or ISO bolts.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00135
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00135
Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.
Compare
Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.
T60ROSSB6HEC-PA66HS-BK 157-00101
Compare
Add to watchlist
500 pcs.
Black (BK) T60ROSSB6HEC-PA66HS-BK 157-00101
Fixing tie for stud, ⌀2.0-50.0mm, black, 1500pcs.
Four-pawl, three-tooth design delivers outstanding stud retention to keep bundles secure.
Compare
Fixing tie for stud, ⌀2.0-50.0mm, black, 1500pcs.
T50ROSSB5-6U-PA66HIRHSUV-BK 157-00233
Compare
Add to watchlist
1500 pcs.
Black (BK) T50ROSSB5-6U-PA66HIRHSUV-BK 157-00233
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, black, 2000pcs.
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Compare
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, black, 2000pcs.
T50ROSM6SMSO25-PA66HIRHSUV-BK 157-00325
Compare
Add to watchlist
2000 pcs.
Black (BK) T50ROSM6SMSO25-PA66HIRHSUV-BK 157-00325
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC10-14-PA66/PA66HIRHS-BK 156-01032
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC10-14-PA66/PA66HIRHS-BK 156-01032
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00777
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00777
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.
T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00696
Compare
Add to watchlist
250 pcs.
Black (BK) T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00696
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVC3.5-PA66HS/PA66HIRHS-BK 156-01350
Compare
Add to watchlist
1000
Black (BK) T50SVC3.5-PA66HS/PA66HIRHS-BK 156-01350
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVC3.5-PA66HIRHSUV-BK 156-02534
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC3.5-PA66HIRHSUV-BK 156-02534
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
T50SMVCLOC10-14-PA66HIRHSUV-BK 156-02594
Compare
Add to watchlist
1000 pcs.
Black (BK) T50SMVCLOC10-14-PA66HIRHSUV-BK 156-02594
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
Compare
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
ATSFT5LG-PA66HIRHS-BK 102-67050
Compare
Add to watchlist
5000 pcs.
Black (BK) ATSFT5LG-PA66HIRHS-BK 102-67050
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 6.63kg, blue
The automatic bundling tool ATS flex with different jaw sizes.
Compare
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 6.63kg, blue
ATS_flex_second_hand-MET-BU 102-60900
Compare
Add to watchlist
1 pcs.
Blue (BU) ATS_flex_second_hand-MET-BU 102-60900
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 26/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.290.3) | Update: 26/10/2025 | Privacy Settings
Contact