Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
16/09/2025

Results for "Heat shrinkable tubing adhesive lined"

789 products found 3 further hits
Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (261)

Cable Ties Inside Serrated  (12) Cable Ties Outside Serrated  (2) Cable Ties Without Serration  (10) Cable Ties, Releasable  (6) Cable Ties With Fixing Elements  (56) Cable Tie Mounts  (46) Fixing Elements  (14) Clips, Clamps and Plugs  (129)
Cable Ties and Fixings
Cable Ties and Fixings (261)
Insulation

Insulation  (330)

Heat Shrink Tubing  (318) Heat Shrinkable Moulded Shapes  (14) Insulating tubes  (1)
Insulation
Insulation (330)
Cable Protection Systems

Cable Protection Systems  (30)

Protective Tubing and Spiral Binding  (22) Cable Glands  (8)
Cable Protection Systems
Cable Protection Systems (30)
Electrical Installation

Electrical Installation  (141)

Electrical Tapes  (9) Gel Technology  (1) Pre-insulated Terminals  (3) Chemicals  (1) Lugs and Links  (127)
Electrical Installation
Electrical Installation (141)
Identification Systems

Identification Systems  (28)

Wire and Cable Markers  (18) Control Panel Labelling  (9) Printers and Software  (10)
Identification Systems
Identification Systems (28)
789 products
Reset all
Cable clip with pipe/tube holder, Dmin=12.7mm, Dmax=19.6mm
Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.
Compare
Cable clip with pipe/tube holder, Dmin=12.7mm, Dmax=19.6mm
IRCBNEXTT-PA66HIRHSUV/SS304-BK 156-04192
Compare
Add to watchlist
200 pcs.
Black (BK) IRCBNEXTT-PA66HIRHSUV/SS304-BK 156-04192
Cable clip, Dmin=12.7mm, Dmax=19.6mm
Ratchet Clamp ATI solar clip.
Compare
Cable clip, Dmin=12.7mm, Dmax=19.6mm
IRCBATI-PA66HIRHSUV/SS304-BK 156-04196
Compare
Add to watchlist
200
Black (BK) IRCBATI-PA66HIRHSUV/SS304-BK 156-04196
Cable clip with pipe/tube holder, Dmin=19.3mm, Dmax=36.1mm
Nexttracker seriers, IRCCNEXT.
Compare
Cable clip with pipe/tube holder, Dmin=19.3mm, Dmax=36.1mm
IRCCNEXTT-PA66HIRHSUV/SS304-BK 156-04193
Compare
Add to watchlist
200 pcs.
Black (BK) IRCCNEXTT-PA66HIRHSUV/SS304-BK 156-04193
Cable clip, Dmin=19.3mm, Dmax=36.1mm
Compare
Cable clip, Dmin=19.3mm, Dmax=36.1mm
IRCCATI-PA66HIRHSUV/SS304-BK 156-04197
Compare
Add to watchlist
200
Black (BK) IRCCATI-PA66HIRHSUV/SS304-BK 156-04197
Cable clip with pipe/tube holder, Dmin=36.1mm, Dmax=50.8mm
Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.
Compare
Cable clip with pipe/tube holder, Dmin=36.1mm, Dmax=50.8mm
IRCDNEXTT-PA66HIRHSUV/SS304-BK 156-04194
Compare
Add to watchlist
175
Black (BK) IRCDNEXTT-PA66HIRHSUV/SS304-BK 156-04194
Cable clip, Dmin=36.1mm, Dmax=50.8mm
Our ATI series is designed for severe weather and single axis tracker movement.
Compare
Cable clip, Dmin=36.1mm, Dmax=50.8mm
IRCDATI-PA66HIRHSUV/SS304-BK 156-04198
Compare
Add to watchlist
175
Black (BK) IRCDATI-PA66HIRHSUV/SS304-BK 156-04198
Cable clip, ⌀6.3 mm, Dmin=12.7mm, Dmax=19.56mm
Compare
Cable clip, ⌀6.3 mm, Dmin=12.7mm, Dmax=19.56mm
CMRCBLM6-PA66HIRHSUV-BK 151-03540
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
150 pcs.
Black (BK) CMRCBLM6-PA66HIRHSUV-BK 151-03540
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, ⌀6.3 mm, Dmin=12.7mm, Dmax=19.56mm
Compare
Cable clip, ⌀6.3 mm, Dmin=12.7mm, Dmax=19.56mm
CMRCBLM6-PA66HIRHSUV-BK 151-04005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) CMRCBLM6-PA66HIRHSUV-BK 151-04005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, Dmin=12.7mm, Dmax=19.56mm, ⌀M6
Compare
Cable clip, Dmin=12.7mm, Dmax=19.56mm, ⌀M6
CMRCBSMM6-PA66HIRHSUV-BK 151-03544
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
150 pcs.
Black (BK) CMRCBSMM6-PA66HIRHSUV-BK 151-03544
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.
H10P-PA66HS-BK 211-60009
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H10P-PA66HS-BK 211-60009
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.
SNP10-PA66HIRHSGF15-BK 192-10100
Compare
Add to watchlist
100 pcs.
Black (BK) SNP10-PA66HIRHSGF15-BK 192-10100
Gel, Polybutadiene (PBD) transparent/orange, 250ml
Two-component gel KH 100.
Compare
Gel, Polybutadiene (PBD) transparent/orange, 250ml
Gel-100 250 ml-PBD-CL/OG 435-00835
Compare
Add to watchlist
1 pcs.
Transparent (CL), Orange (OG) Gel-100 250 ml-PBD-CL/OG 435-00835
Aluminium frame mount for Item/MiniTec, W=8.0mm, T=4.5mm, black, 500pcs.
Compare
Aluminium frame mount for Item/MiniTec, W=8.0mm, T=4.5mm, black, 500pcs.
ACFM5W8PT4,5-PA66/6HIRHS-BK 151-03192
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) ACFM5W8PT4,5-PA66/6HIRHS-BK 151-03192
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
SAM320B-R-PA66HIRHSUV-BK 151-02099
Compare
Add to watchlist
500 pcs.
Black (BK) SAM320B-R-PA66HIRHSUV-BK 151-02099
Cable clip, Dmin=12.7mm, Dmax=19.5mm
Clamp and mount combination means no extra hardware is needed.
Compare
Cable clip, Dmin=12.7mm, Dmax=19.5mm
IRCBSTRUT-PA66HIRHSUV-BK 156-03000
Compare
Add to watchlist
200 pcs.
Black (BK) IRCBSTRUT-PA66HIRHSUV-BK 156-03000
Cable clip, Dmin=19.4mm, Dmax=36.0mm
Clamp and mount combination means no extra hardware is needed.
Compare
Cable clip, Dmin=19.4mm, Dmax=36.0mm
IRCCSTRUT-PA66HIRHSUV-BK 156-03002
Compare
Add to watchlist
200 pcs.
Black (BK) IRCCSTRUT-PA66HIRHSUV-BK 156-03002
Cable clip, Dmin=36.0mm, Dmax=51.0mm
Inline Ratchet Clamp - Strut Series, IRCDSTRUT.
Compare
Cable clip, Dmin=36.0mm, Dmax=51.0mm
IRCDSTRUT-PA66HIRHSUV-BK 156-03004
Compare
Add to watchlist
200 pcs.
Black (BK) IRCDSTRUT-PA66HIRHSUV-BK 156-03004
Cable clip, ⌀7.0 mm, Dmin=12.7mm, Dmax=19.56mm
Inline Center Mount series, CMRCBLM6.
Compare
Cable clip, ⌀7.0 mm, Dmin=12.7mm, Dmax=19.56mm
CMRCBHM6-PA66HIRHSUV-BK 151-03538
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
150 pcs.
Black (BK) CMRCBHM6-PA66HIRHSUV-BK 151-03538
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, ⌀9.0 mm, Dmin=12.7mm, Dmax=19.56mm
Compare
Cable clip, ⌀9.0 mm, Dmin=12.7mm, Dmax=19.56mm
CMRCBHM8-PA66HIRHSUV-BK 151-03539
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
150 pcs.
Black (BK) CMRCBHM8-PA66HIRHSUV-BK 151-03539
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
H1P-PA66HS-BK 211-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H1P-PA66HS-BK 211-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.
H9P-PA66HS-BK 211-60008
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H9P-PA66HS-BK 211-60008
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
HDM400-PA66HIRHSUV-BK 151-01224
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) HDM400-PA66HIRHSUV-BK 151-01224
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.
HDM401-PA66HIRHSUV-BK 151-07300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) HDM401-PA66HIRHSUV-BK 151-07300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.3 mm, 3/8" (M10) Screw, black, 100pcs.
Arched
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.3 mm, 3/8" (M10) Screw, black, 100pcs.
HDM375BDM4W-R-PA66HIRHSUV-BK 151-02104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) HDM375BDM4W-R-PA66HIRHSUV-BK 151-02104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Bosch Rexroth/SUS, W=10.0mm, T=6.0mm, black, 500pcs.
The ACFM2W10PT6 for Bosch Rexroth 45.0 mm frame.
Compare
Aluminium frame mount for Bosch Rexroth/SUS, W=10.0mm, T=6.0mm, black, 500pcs.
ACFM2W10PT6-PA66/6HIRHS-BK 151-02858
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) ACFM2W10PT6-PA66/6HIRHS-BK 151-02858
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Ziegler, W=13.0mm, T=3.5mm, black, 500pcs.
Compare
Aluminium frame mount for Ziegler, W=13.0mm, T=3.5mm, black, 500pcs.
ACFM1W13PT3.5-PA66/6HIRHS-BK 151-02942
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) ACFM1W13PT3.5-PA66/6HIRHS-BK 151-02942
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Bosch Rexroth/MayTec, W=8.0mm, T=2.2mm, black, 500pcs.
Compare
Aluminium frame mount for Bosch Rexroth/MayTec, W=8.0mm, T=2.2mm, black, 500pcs.
ACFM4W8PT2.2-PA66/6HIRHS-BK 151-03176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) ACFM4W8PT2.2-PA66/6HIRHS-BK 151-03176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Item, W=10.0mm, T=5.3mm, black, 500pcs.
Compare
Aluminium frame mount for Item, W=10.0mm, T=5.3mm, black, 500pcs.
ACFM7W10PT5.3-PA66/6HIRHS-BK 151-03193
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) ACFM7W10PT5.3-PA66/6HIRHS-BK 151-03193
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Item, W=6.2mm, T=2.75mm, black, 500pcs.
ACFM8W6.2PT3 (Aluminium Clip Frame Mount).
Compare
Aluminium frame mount for Item, W=6.2mm, T=2.75mm, black, 500pcs.
ACFM8W6.2PT2.75-PA66/6HIRHS-BK 151-03248
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) ACFM8W6.2PT2.75-PA66/6HIRHS-BK 151-03248
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, outside serrated, ⌀105.0mm, black, 200pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Compare
Fixing tie for screw fixation, outside serrated, ⌀105.0mm, black, 200pcs.
T120ROSDHDM6-PA66HS/PA66W-BK 156-01485
Compare
Add to watchlist
50 pcs.
Black (BK) T120ROSDHDM6-PA66HS/PA66W-BK 156-01485
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
SAM400B-R-PA66HIRHSUV-BK 151-02102
Compare
Add to watchlist
500 pcs.
Black (BK) SAM400B-R-PA66HIRHSUV-BK 151-02102
Cable tie mount for cable bundles, Wmax=12.7mm, black, 2200pcs.
The spacers can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle.
Compare
Cable tie mount for cable bundles, Wmax=12.7mm, black, 2200pcs.
DSWS4-PA66HS/POM-BK 151-06500
Compare
Add to watchlist
2200 pcs.
Black (BK) DSWS4-PA66HS/POM-BK 151-06500
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Compare
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Eliminates the need for multiple sizes of fixed diameter clamps.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 880x28.0mm, ⌀240mm, 360N, black, 3pcs.
SOFTFIX XXL (880x28mm) in a bag with 3 pieces
Compare
Releasable cable tie, 880x28.0mm, ⌀240mm, 360N, black, 3pcs.
SOFTFIX XXL-TPU-BK 115-28898
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
3 pack
Black (BK) SOFTFIX XXL-TPU-BK 115-28898
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 180x7.0mm, ⌀10.0-45.0mm, 57N, black, 16pcs.
SOFTFIX XS (180x7mm) in a bag with 16 pieces
Compare
Releasable cable tie, 180x7.0mm, ⌀10.0-45.0mm, 57N, black, 16pcs.
SOFTFIX XS-TPU-BK 115-07190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
16 pack
Black (BK) SOFTFIX XS-TPU-BK 115-07190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 260x7.0mm, ⌀70.0mm, 57N, black, 12pcs.
SOFTFIX S (260x7mm) in a bag with 12 pieces
Compare
Releasable cable tie, 260x7.0mm, ⌀70.0mm, 57N, black, 12pcs.
SOFTFIX S-TPU-BK 115-07270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
12 pack
Black (BK) SOFTFIX S-TPU-BK 115-07270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 260.0x11.0mm, ⌀65.0mm, 123N, black, 8pcs.
SOFTFIX M (260x11mm) in a bag with 8 pieces
Compare
Releasable cable tie, 260.0x11.0mm, ⌀65.0mm, 123N, black, 8pcs.
SOFTFIX M-TPU-BK 115-11270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
8 pack
Black (BK) SOFTFIX M-TPU-BK 115-11270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 6pcs.
SOFTFIX L (340x11mm) in a bag with 6 pieces
Compare
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 6pcs.
SOFTFIX L-TPU-BK 115-11350
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
6 pack
Black (BK) SOFTFIX L-TPU-BK 115-11350
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 3pcs.
SOFTFIX XL (580x28mm) in a bag with 3 pieces
Compare
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 3pcs.
SOFTFIX XL-TPU-BK 115-28590
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
3 pack
Black (BK) SOFTFIX XL-TPU-BK 115-28590
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCTT)
Tension tab can be used to ensure specific tension.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCTT)
RCTT-PA66HIRHSUV-BK 151-01529
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCTT-PA66HIRHSUV-BK 151-01529
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTA)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTA)
RCINSERTA-TPE-BK 151-01530
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTA-TPE-BK 151-01530
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTB)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTB)
RCINSERTB-TPE-BK 151-01531
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTB-TPE-BK 151-01531
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTC)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTC)
RCINSERTC-TPE-BK 151-01532
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTC-TPE-BK 151-01532
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTD)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTD)
RCINSERTD-TPE-BK 151-01533
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTD-TPE-BK 151-01533
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Wire harness tape L=25m, W=19mm, T=0.25mm, black, 1 pc.
HelaTape Protect 250 is designed for cable harnessing and offers a very high temperature resistance.
Compare
Wire harness tape L=25m, W=19mm, T=0.25mm, black, 1 pc.
HTAPE-PROTECT250-PET-BK 712-10003
Compare
Add to watchlist
1 pcs.
Black (BK) HTAPE-PROTECT250-PET-BK 712-10003
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fastening ties for 5.0 mm round welding or threaded studs.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSSBS5E-2-PA66HS-BK 157-00252
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSBS5E-2-PA66HS-BK 157-00252
Fixing tie for hole (oval), outside serrated, ⌀1.0-35.0mm, black, 1500pcs.
Fixing tie for oval holes.
Compare
Fixing tie for hole (oval), outside serrated, ⌀1.0-35.0mm, black, 1500pcs.
T50SOS2DOP62X122-E-PA66HS-BK 157-00014
Compare
Add to watchlist
1500 pcs.
Black (BK) T50SOS2DOP62X122-E-PA66HS-BK 157-00014
Accessory, Helawrap, blue, 10pcs. (HAT8)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT8)
HAT8-PA66-BU 161-60001
Compare
Add to watchlist
10 pcs.
Blue (BU) HAT8-PA66-BU 161-60001
Accessory, Helawrap, blue, 10pcs. (HAT16)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT16)
HAT16-PA66-BU 161-60002
Compare
Add to watchlist
10 pcs.
Blue (BU) HAT16-PA66-BU 161-60002
Accessory, Helawrap, blue, 10pcs. (HAT20)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT20)
HAT20-PA66-BU 161-60003
Compare
Add to watchlist
10 pcs.
Blue (BU) HAT20-PA66-BU 161-60003
Accessory, Helawrap, blue, 10pcs. (HAT25)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT25)
HAT25-PA66-BU 161-60004
Compare
Add to watchlist
10 pcs.
Blue (BU) HAT25-PA66-BU 161-60004
Accessory, Helawrap, blue, 10pcs. (HAT30)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT30)
HAT30-PA66-BU 161-60005
Compare
Add to watchlist
10 pcs.
Blue (BU) HAT30-PA66-BU 161-60005
Accessory, Helawrap, blue, 5pcs. (HAT40)
Applicator tools are available for every Helawrap cover size.
Compare
Accessory, Helawrap, blue, 5pcs. (HAT40)
HAT40-PA66-BU 161-60006
Compare
Add to watchlist
5 pcs.
Blue (BU) HAT40-PA66-BU 161-60006
Applicator Nozzle for two-component adhesive Dosing Gun
Mixing nozzle for V9500 2k epoxy adhesive cartridge.
Compare
Applicator Nozzle for two-component adhesive Dosing Gun
V9500 Applicator Nozzle-PO-CL 627-95004
Compare
Add to watchlist
10 pack
Transparent (CL) V9500 Applicator Nozzle-PO-CL 627-95004
Two-Component Adhesiver 50g
V9500 - VG 95343 approved 2K Epoxy Adhesive Cartridge.
Compare
Two-Component Adhesiver 50g
V9500 Epoxy Cartridge-EP-BK 627-95002
Compare
Add to watchlist
1 pcs.
Black (BK) V9500 Epoxy Cartridge-EP-BK 627-95002
Hot Melt Tape reel 50 m
HMT200A-Tape.
Compare
Hot Melt Tape reel 50 m
HMT200A-EVA-CL 354-02259
Compare
Add to watchlist
50 pcs.
Translucent (TT) HMT200A-EVA-CL 354-02259
Heat Shrinkable Tubing 2:1 flexible 3.2/1.6 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 flexible 3.2/1.6 transparent
TF24-3.2/1.6-PO-X-CL 309-40323
Compare
Add to watchlist
100 metre
Transparent (CL) TF24-3.2/1.6-PO-X-CL 309-40323
Heat Shrinkable Tubing 2:1 flexible 12.7/6.4 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 flexible 12.7/6.4 transparent
TF24-12.7/6.4-PO-X-CL 309-41273
Compare
Add to watchlist
50 metre
Transparent (CL) TF24-12.7/6.4-PO-X-CL 309-41273
Heat Shrinkable Tubing 2:1 flame retardant halogen free 4.8/2.4 black
Compare
Heat Shrinkable Tubing 2:1 flame retardant halogen free 4.8/2.4 black
TR27-4.8/2.4-PO-X-BK 315-50480
Compare
Add to watchlist
60 metre
Black (BK) TR27-4.8/2.4-PO-X-BK 315-50480
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100.0mm, black, 250pcs.
BHT375 - used for mounting cables via a single hole.
Compare
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100.0mm, black, 250pcs.
BHT375M-PA66HS-BK 150-47595
Compare
Add to watchlist
250 pcs.
Black (BK) BHT375M-PA66HS-BK 150-47595
Thermal transfer ribbon, W=110.0mm, black, 300m
Compare
Thermal transfer ribbon, W=110.0mm, black, 300m
TT100OUT-PET-BK 556-00104
Compare
Add to watchlist
1 pcs.
Black (BK) TT100OUT-PET-BK 556-00104
Thermal transfer ribbon, W=110.0mm, black, 300m
Ribbons for printing on adhesive labels.
Compare
Thermal transfer ribbon, W=110.0mm, black, 300m
TT822OUT 110MM-PET-BK 556-00101
Compare
Add to watchlist
1 pcs.
Black (BK) TT822OUT 110MM-PET-BK 556-00101
Thermal transfer ribbon, W=85.0mm, black, 300m
Compare
Thermal transfer ribbon, W=85.0mm, black, 300m
TT932DOUT 85MM-PET-BK 556-00117
Compare
Add to watchlist
1 pcs.
Black (BK) TT932DOUT 85MM-PET-BK 556-00117
Thermal transfer ribbon, W=110.0mm, black, 300m
Ribbons for printing on adhesive labels.
Compare
Thermal transfer ribbon, W=110.0mm, black, 300m
TT932DOUT 110MM-PET-BK 556-00118
Compare
Add to watchlist
1 pcs.
Black (BK) TT932DOUT 110MM-PET-BK 556-00118
Thermal transfer ribbon, W=40.0mm, black, 300m
Compare
Thermal transfer ribbon, W=40.0mm, black, 300m
TTDTHOUT 40MM-PET-BK 556-00139
Compare
Add to watchlist
1 pcs.
Black (BK) TTDTHOUT 40MM-PET-BK 556-00139
Thermal transfer ribbon, W=60.0mm, black, 300m
Compare
Thermal transfer ribbon, W=60.0mm, black, 300m
TTDTHOUT 60MM-PET-BK 556-00140
Compare
Add to watchlist
1 pcs.
Black (BK) TTDTHOUT 60MM-PET-BK 556-00140
Thermal transfer ribbon, W=30mm, black, 300m
Compare
Thermal transfer ribbon, W=30mm, black, 300m
TTRC+ 30MM-PET/DIV-BK 556-00114
Compare
Add to watchlist
1 pcs.
Black (BK) TTRC+ 30MM-PET/DIV-BK 556-00114
Thermal transfer ribbon, W=60mm, black, 300m
Compare
Thermal transfer ribbon, W=60mm, black, 300m
TTRC+ 60MM-PET/DIV-BK 556-00115
Compare
Add to watchlist
1 pcs.
Black (BK) TTRC+ 60MM-PET/DIV-BK 556-00115
Thermal transfer ribbon, W=100.0mm, white, 300m
Compare
Thermal transfer ribbon, W=100.0mm, white, 300m
TTRW 100MM-PET-WH 556-00133
Compare
Add to watchlist
1 pcs.
White (WH) TTRW 100MM-PET-WH 556-00133
Thermal transfer ribbon, W=100mm, black, 300m
Premium thermal transfer ribbons.
Compare
Thermal transfer ribbon, W=100mm, black, 300m
TTRA-PET-BK 556-00134
Compare
Add to watchlist
1 pc.
Black (BK) TTRA-PET-BK 556-00134
Facebook  Instagram  X  YouTube  LinkedIn  Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 06/09/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.286.1) | Update: 06/09/2025 | Privacy Settings
Contact