Pезултати за „Plastic P-Clamps AB10N“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Моля обърнете внимание: Търсената от вас комбинация от термини не връща съответстващи резултати. По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

Изглед на инженера

Sustainable

Изглед на инженера

Sustainable

Нулиране на всички

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, natural, 100pcs.

P-Clip, NX-Series.

Сравнете

NX0-PA66-NA 211-00242

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NX0-PA66-NA 211-00242

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.

P-Clip, NX-Series.

Сравнете

NX0-PA66-BK 211-00254

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NX0-PA66-BK 211-00254

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, natural, 100pcs.

P-Clip, NX-Series.

Сравнете

NX1-PA66-NA 211-00237

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NX1-PA66-NA 211-00237

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.

P-Clip, NX-Series.

Сравнете

NX1-PA66-BK 211-00246

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NX1-PA66-BK 211-00246

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.

P-Clip, NX-Series.

Сравнете

NX3-PA66-BK 211-00248

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NX3-PA66-BK 211-00248

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, natural, 100pcs.

P-Clip, NX-Series.

Сравнете

NX4-PA66-NA 211-00235

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NX4-PA66-NA 211-00235

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.

P-Clip, NX-Series.

Сравнете

NX4-PA66-BK 211-00249

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NX4-PA66-BK 211-00249

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, natural, 100pcs.

P-Clip, NX-Series.

Сравнете

NX6-PA66-NA 211-00236

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NX6-PA66-NA 211-00236

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.

P-Clip, NX-Series.

Сравнете

NX6-PA66-BK 211-00256

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NX6-PA66-BK 211-00256

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, natural, 100pcs.

P-Clip NXR-Series.

Сравнете

NX1A-PA66-NA 211-00238

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NX1A-PA66-NA 211-00238

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.

P-Clip NXR-Series.

Сравнете

NX1A-PA66-BK 211-00247

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NX1A-PA66-BK 211-00247

P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, natural, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR8-PA66-NA 211-00239

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NXR8-PA66-NA 211-00239

P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, black, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR8-PA66-BK 211-00250

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NXR8-PA66-BK 211-00250

P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, natural, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR11-PA66-NA 211-00240

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NXR11-PA66-NA 211-00240

P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, black, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR11-PA66-BK 211-00251

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NXR11-PA66-BK 211-00251

P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, natural, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR14-PA66-NA 211-00241

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NXR14-PA66-NA 211-00241

P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR14-PA66-BK 211-00252

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NXR14-PA66-BK 211-00252

P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR14-PA66W-BK 211-00255

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NXR14-PA66W-BK 211-00255

P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, natural, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR16-PA66-NA 211-00243

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NXR16-PA66-NA 211-00243

P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, black, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR16-PA66-BK 211-00253

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) NXR16-PA66-BK 211-00253

P-clamp closed, Dmin=33.3mm, Dmax=38.1mm, ⌀5.7 mm, natural, 100pcs.

P-Clip NXR-Series.

Сравнете

NXR18-PA66-NA 211-00244

Сравнете

Добавяне към списъка с наблюдавани

P-Clip NXR-Series.

Сравнете

P-clamp closed, Dmin=33.3mm, Dmax=38.1mm, ⌀5.7 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NXR18-PA66-NA 211-00244

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H8P-PA66HS-BK 211-60007

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H8P-PA66HS-BK 211-60007

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, natural, 100pcs.

P-Clip, NX-Series.

Сравнете

NX3-PA66-NA 211-00234

Сравнете

Добавяне към списъка с наблюдавани

P-Clip, NX-Series.

Сравнете

P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) NX3-PA66-NA 211-00234

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H10P-PA66HS-BK 211-60009

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H10P-PA66HS-BK 211-60009

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H1P-PA66HS-BK 211-60000

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H1P-PA66HS-BK 211-60000

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H9P-PA66HS-BK 211-60008

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H9P-PA66HS-BK 211-60008

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H11P-PA66-NA 211-60119

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H11P-PA66-NA 211-60119

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H13P-PA66-NA 211-60139

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Natural (NA) H13P-PA66-NA 211-60139

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H14P-PA66-NA 211-60149

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Natural (NA) H14P-PA66-NA 211-60149

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H15P-PA66-NA 211-60159

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Natural (NA) H15P-PA66-NA 211-60159

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H16P-PA66-NA 211-60169

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Natural (NA) H16P-PA66-NA 211-60169

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H17P-PA66-NA 211-60179

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Natural (NA) H17P-PA66-NA 211-60179

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H18P-PA66-NA 211-60189

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Natural (NA) H18P-PA66-NA 211-60189

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H3P-PA66HS-BK 211-60002

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H3P-PA66HS-BK 211-60002

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H4P-PA66HS-BK 211-60003

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H4P-PA66HS-BK 211-60003

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H6P-PA66HS-BK 211-60005

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H6P-PA66HS-BK 211-60005

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H7P-PA66HS-BK 211-60006

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H7P-PA66HS-BK 211-60006

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H10P-PA66-NA 211-60109

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H10P-PA66-NA 211-60109

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H12P-PA66-NA 211-60129

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H12P-PA66-NA 211-60129

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H2P-PA66HS-BK 211-60001

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H2P-PA66HS-BK 211-60001

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H5P-PA66HS-BK 211-60004

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H5P-PA66HS-BK 211-60004

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H8P-PA66-NA 211-60089

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H8P-PA66-NA 211-60089

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H9P-PA66-NA 211-60099

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H9P-PA66-NA 211-60099

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H7P-PA66-NA 211-60079

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H7P-PA66-NA 211-60079

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H1P-PA66-NA 211-60019

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H1P-PA66-NA 211-60019

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H6P-PA66-NA 211-60069

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H6P-PA66-NA 211-60069

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H5P-PA66-NA 211-60059

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H5P-PA66-NA 211-60059

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H3P-PA66-NA 211-60039

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H3P-PA66-NA 211-60039

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H4P-PA66-NA 211-60049

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H4P-PA66-NA 211-60049

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Сравнете

H2P-PA66-NA 211-60029

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps H1P - H18P in different dimensions.

Сравнете

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) H2P-PA66-NA 211-60029

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU12-AL-NA 211-10120

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU12-AL-NA 211-10120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU13-AL-NA 211-10130

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU13-AL-NA 211-10130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU11-AL-NA 211-10110

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU17C-AL/CR-BK 211-15170

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU19C-AL/CR-BK 211-15190

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Сравнете

ALU23C-AL/CR-BK 211-15230

Сравнете

Добавяне към списъка с наблюдавани

ALU23C P-Clamp with chloroprene insert.

Сравнете

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU24C-AL/CR-BK 211-15240

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU25C-AL/CR-BK 211-15250

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU26C-AL/CR-BK 211-15260

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU28C-AL/CR-BK 211-15280

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU29C-AL/CR-BK 211-15290

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU30C-AL/CR-BK 211-15300

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU34C-AL/CR-BK 211-15340

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU8-AL-NA 211-10080

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU10-AL-NA 211-10100

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU11C-AL/CR-BK 211-15110

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU13C-AL/CR-BK 211-15130

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU14C-AL/CR-BK 211-15140

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU16C-AL/CR-BK 211-15160

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU18C-AL/CR-BK 211-15180

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU20C-AL/CR-BK 211-15200

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU22C-AL/CR-BK 211-15220

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU4-AL-NA 211-10040

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU4C-AL/CR-BK 211-15040

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU5-AL-NA 211-10050

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU5C-AL/CR-BK 211-15050

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU7-AL-NA 211-10070

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU6-AL-NA 211-10060

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU12C-AL/CR-BK 211-15120

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU15C-AL/CR-BK 211-15150

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU6C-AL/CR-BK 211-15060

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU7C-AL/CR-BK 211-15070

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU8C-AL/CR-BK 211-15080

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU9C-AL/CR-BK 211-15090

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU10C-CR/AL-BK 211-15100

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Samples ENG Ratchet P Clamp-DIV-BK

Сравнете

Samples ENG Ratchet P Clamp-DIV-BK 905-50036

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Samples ENG Ratchet P Clamp-DIV-BK

Сравнете

Добавяне към списъка с наблюдавани

1 pack

Black (BK) Samples ENG Ratchet P Clamp-DIV-BK 905-50036

Samples Ratchet P Clamp-DIV-BK

Сравнете

Samples Ratchet P Clamp-DIV-BK 905-50037

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Samples Ratchet P Clamp-DIV-BK

Сравнете

Добавяне към списъка с наблюдавани

1 pack

Black (BK) Samples Ratchet P Clamp-DIV-BK 905-50037

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Plastic Rivets TY8P1.

Сравнете

TY8P2-SET-PA66-BK 241-11820

Сравнете

Добавяне към списъка с наблюдавани

Plastic Rivets TY8P1.

Сравнете

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) TY8P2-SET-PA66-BK 241-11820

Plastic rivet fastener, ⌀3.0 mm, natural 1000pcs.

Plastic Rivets TY8P1.

Сравнете

TY3P1-PA66-NA 241-11319

Сравнете

Добавяне към списъка с наблюдавани

Plastic Rivets TY8P1.

Сравнете

Plastic rivet fastener, ⌀3.0 mm, natural 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) TY3P1-PA66-NA 241-11319

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Plastic Rivets TY8P1.

Сравнете

TY8P1-PA66-BK 241-11810

Сравнете

Добавяне към списъка с наблюдавани

Plastic Rivets TY8P1.

Сравнете

Plastic rivet fastener, ⌀4.0 mm, black 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) TY8P1-PA66-BK 241-11810

Plastic rivet fastener, ⌀4.0 mm, natural 1000pcs.

Plastic Rivets TY8P1.

Сравнете

TY8P1-PA66-NA 241-11819

Сравнете

Добавяне към списъка с наблюдавани

Plastic Rivets TY8P1.

Сравнете

Plastic rivet fastener, ⌀4.0 mm, natural 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Natural (NA) TY8P1-PA66-NA 241-11819

Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 100pcs.

The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.

Сравнете

T50R-PVDF-GY 111-02390

Сравнете

Добавяне към списъка с наблюдавани

The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.

Сравнете

Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Grey (GY) T50R-PVDF-GY 111-02390

Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 3000pcs.

The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.

Сравнете

T50R-PVDF-GY 111-02447

Сравнете

Добавяне към списъка с наблюдавани

The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.

Сравнете

Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 3000pcs.

Сравнете

Добавяне към списъка с наблюдавани

3000 pcs.

Grey (GY) T50R-PVDF-GY 111-02447

Fixing tie for edge, inside serrated, ⌀1.5-45.0mm, black, 500pcs.

Сравнете

T40REC5A-PA66HS/PA66HIRHS-BK 156-00559

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for edge, inside serrated, ⌀1.5-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T40REC5A-PA66HS/PA66HIRHS-BK 156-00559

Metal cable clip for edge, ⌀5.0-7.59mm, T=1.0 - 3.0mm, metal, 5000pcs.

Double-compression design can accommodate up to 2 wires or cables of varying sizes.

Сравнете

MSC2-SS304-ML 151-02320

Сравнете

Добавяне към списъка с наблюдавани

Double-compression design can accommodate up to 2 wires or cables of varying sizes.

Сравнете

Metal cable clip for edge, ⌀5.0-7.59mm, T=1.0 - 3.0mm, metal, 5000pcs.

Сравнете

Добавяне към списъка с наблюдавани

5000 pcs.

Metal (ML) MSC2-SS304-ML 151-02320

Plastic hose clamp, ⌀41.0-44.2mm, natural, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Сравнете

SNP42(E)-POM-NA 191-10429

Сравнете

Добавяне към списъка с наблюдавани

Designed for quick, ratcheted installation and can be released and reused.

Сравнете

Plastic hose clamp, ⌀41.0-44.2mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) SNP42(E)-POM-NA 191-10429

Plastic hose clamp, ⌀52.2-58.6mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Сравнете

SNP50-PA66GF13-BK 192-10500

Сравнете

Добавяне към списъка с наблюдавани

Designed for quick, ratcheted installation and can be released and reused.

Сравнете

Plastic hose clamp, ⌀52.2-58.6mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) SNP50-PA66GF13-BK 192-10500

Plastic hose clamp, ⌀56.7-59.2mm, natural, 100pcs.

SNP - Snapper Hose Clips range.

Сравнете

SNP58(E)-POM-NA 191-10589

Сравнете

Добавяне към списъка с наблюдавани

SNP - Snapper Hose Clips range.

Сравнете

Plastic hose clamp, ⌀56.7-59.2mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) SNP58(E)-POM-NA 191-10589

Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, green, 100pcs.

T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.

Сравнете

T30L-PA66-GN 111-00193

Сравнете

Добавяне към списъка с наблюдавани

T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.

Сравнете

Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, green, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Green (GN) T30L-PA66-GN 111-00193

Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, red, 100pcs.

T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.

Сравнете

T30L-PA66-RD 111-00196

Сравнете

Добавяне към списъка с наблюдавани

T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.

Сравнете

Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, red, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Red (RD) T30L-PA66-RD 111-00196

Pезултати за „Plastic P-Clamps AB10N“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Свински опашки и крепежи

Свински опашки и крепежи

Свински опашки и крепежи

Кабелните връзки трябва да отговарят на редица изисквания, тъй като се използват в широк спектър от приложения - от простото свързване на кабели до много специфични приложения при екстремни условия.

Свински опашки

Скоба за кабелни връзки за ръбове: закрепете кабелите без пробиване

EdgeClip е решение за закрепване на кабели, което позволява гъвкаво прокарване на проводници, кабелни снопове, тръбопроводи и маркучи в различни индустриални приложения, включително автомобилната индустрия.

Скоба за кабелни връзки за ръбове

Дистрибутори Контакт

‹ › ×