Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
20/11/2025

Резултати за „id“

3 440 продуктови посещения 16 допълнителни посещения
Има резултати в следните категории:
Cable Ties and Fixings

Cable Ties and Fixings  (844)

Cable Ties Inside Serrated  (53) Cable Ties Outside Serrated  (34) Cable Ties Without Serration  (1) Cable Ties, Releasable  (58) Cable Ties, Stainless Steel  (42) Cable Ties With Fixing Elements  (309) Cable Tie Mounts  (71) Fixing Elements  (35) Clips, Clamps and Plugs  (269)
Cable Ties and Fixings
Cable Ties and Fixings (844)
Insulation

Insulation  (378)

Heat Shrink Tubing  (308) Heat Shrinkable Moulded Shapes  (1) Insulating tubes  (70)
Insulation
Insulation (378)
Cable Protection Systems

Cable Protection Systems  (177)

Non-Metallic Conduit Systems  (2) Metallic Conduit Systems  (1) Spiral-Reinforced Conduit Systems  (1) Conduit System Accessories  (1) Protective Tubing and Spiral Binding  (83) Expandable Braided Sleeves  (34) Open Woven Sleeves  (71) Burst Protective Sleeves  (3) Electromagnetic Shielding Sleeves  (1) Edge Protection  (8) Grommets  (1) Wiring Ducts and Accessories  (12)
Cable Protection Systems
Cable Protection Systems (177)
Electrical Installation

Electrical Installation  (42)

Wire Connectors  (11) Electrical Tapes  (28) Cast Resin Technology  (3)
Electrical Installation
Electrical Installation (42)
Identification Systems

Identification Systems  (1965)

Wire and Cable Markers  (1438) Control Panel Labelling  (294) Industrial Identification  (361) RFID tags and cable ties  (56) Security Labeling  (35) Hazardous Area Identification  (63) Printers and Software  (47)
Identification Systems
Identification Systems (1965)
Application Tooling

Application Tooling  (48)

Automatic Cable Tying System  (11) Application Tooling for Cable Ties  (22) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (4) Application Tooling for Identification  (5)
Application Tooling
Application Tooling (48)
3 440 продукти
Нулиране на всички
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14-PA66-BK 151-00502
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RB14-PA66-BK 151-00502
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14-PA66-NA 151-00505
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) RB14-PA66-NA 151-00505
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
SolidTack Clip RB8APT with special adhesive.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
RB8APT-PA66-BK 151-00497
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RB8APT-PA66-BK 151-00497
Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm
RB20 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm
RB20-PA66HIRHS-BK 151-00831
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RB20-PA66HIRHS-BK 151-00831
Cable clip for adhesive use/with pipe/tube holder, Dmax=4.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=4.0mm
SAC1-ST-WH 151-00100
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC1-ST-WH 151-00100
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
SAC2-ST-WH 151-00200
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC2-ST-WH 151-00200
Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm
SAC3-ST-WH 151-00300
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC3-ST-WH 151-00300
Cable clip for adhesive use/with pipe/tube holder, Dmax=16.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=16.0mm
SAC4-ST-WH 151-00400
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC4-ST-WH 151-00400
Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=3.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=3.0mm
SAC0-ST-WH 151-00033
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC0-ST-WH 151-00033
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Сравнете
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, ⌀3.2 mm, Dmax=3.0mm
Fixing clip TY8H1(S) - screw fix or self adhesive.
Сравнете
Cable clip, ⌀3.2 mm, Dmax=3.0mm
TY8H1-PA66-NA 151-22819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY8H1-PA66-NA 151-22819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for screw fixation, ⌀3.1 mm
FKH25 are designed to retain flat ribbon cables.
Сравнете
Cable clip for screw fixation, ⌀3.1 mm
FKH25-PA66HIR-BK 151-16250
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) FKH25-PA66HIR-BK 151-16250
Cable clip for screw fixation, ⌀3.1 mm
FKH30 mounts are designed to retain flat ribbon cables.
Сравнете
Cable clip for screw fixation, ⌀3.1 mm
FKH30-PA66HIR-BK 151-16300
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) FKH30-PA66HIR-BK 151-16300
Cable clip for screw fixation, ⌀3.1 mm
FKH50 are designed to retain flat ribbon cables.
Сравнете
Cable clip for screw fixation, ⌀3.1 mm
FKH50-PA66HIR-BK 151-16500
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) FKH50-PA66HIR-BK 151-16500
Cable clip for screw fixation, ⌀3.1 mm
FKH80 are designed to retain flat ribbon cables.
Сравнете
Cable clip for screw fixation, ⌀3.1 mm
FKH80-PA66HIR-BK 151-16800
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) FKH80-PA66HIR-BK 151-16800
Product kit, various, 195pc.
195-piece fixings kit, BMS-100.
Сравнете
Product kit, various, 195pc.
BMS-100-DIV-MIX 151-00000
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Various (MIX) BMS-100-DIV-MIX 151-00000
Cable clip for screw fixation, ⌀5.3 mm, Dmin=6.0mm, Dmax=8.5mm
Сравнете
Cable clip for screw fixation, ⌀5.3 mm, Dmin=6.0mm, Dmax=8.5mm
KB2-PA66-BK 231-10200
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) KB2-PA66-BK 231-10200
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCA180SM10.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
Сравнете
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
Сравнете
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
Сравнете
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
Сравнете
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
Сравнете
Добавяне към списъка с наблюдавани
5
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
Сравнете
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
RCB90SM10SS-PA666V0/SS304-BK 151-03006
Сравнете
Добавяне към списъка с наблюдавани
280
Black (BK) RCB90SM10SS-PA666V0/SS304-BK 151-03006
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Сравнете
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Сравнете
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Сравнете
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Сравнете
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Сравнете
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 13/11/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.291.4) | Актуализиране: 13/11/2025 | Настройките за поверителност
Дистрибутори Контакт