Pезултати за „cable holder“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Изглед на инженера

Sustainable

Изглед на инженера

Sustainable

Нулиране на всички

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Сравнете

SAC2-ST-WH 151-00200

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

White (WH) SAC2-ST-WH 151-00200

Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm

Сравнете

SAC3-ST-WH 151-00300

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

White (WH) SAC3-ST-WH 151-00300

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 2000pcs.

Pipe Clip CBTO, twistable 90°.

Сравнете

T50ROC15-18CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00419

Сравнете

Добавяне към списъка с наблюдавани

Pipe Clip CBTO, twistable 90°.

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 2000pcs.

Сравнете

Добавяне към списъка с наблюдавани

2000 pcs.

Black (BK) T50ROC15-18CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00419

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 3000pcs.

Pipe Clip CBTO, twistable 90°.

Сравнете

T50ROC19-24.5CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00422

Сравнете

Добавяне към списъка с наблюдавани

Pipe Clip CBTO, twistable 90°.

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 3000pcs.

Сравнете

Добавяне към списъка с наблюдавани

3000 pcs.

Black (BK) T50ROC19-24.5CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00422

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

LOC1014FT9x12 locking clamp.

Сравнете

LOC1014FT9x12-PA66HIRHSUV-BK 151-02501

Сравнете

Добавяне към списъка с наблюдавани

LOC1014FT9x12 locking clamp.

Сравнете

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02501

Cable clip (LOC20-25FT6.5LG)

Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.

Сравнете

LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371

Сравнете

Добавяне към списъка с наблюдавани

Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.

Сравнете

Cable clip (LOC20-25FT6.5LG)

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Сравнете

IRCBMB5A-PA66HIRHSUV-BK 156-02723

Сравнете

Добавяне към списъка с наблюдавани

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Сравнете

Добавяне към списъка с наблюдавани

25

Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02723

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU12-AL-NA 211-10120

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU12-AL-NA 211-10120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU13-AL-NA 211-10130

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU13-AL-NA 211-10130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

EdgeClip with Twist Lock.

Сравнете

EC1-3TL7OTP-PA66HIRHS-BK 151-02588

Сравнете

Добавяне към списъка с наблюдавани

EdgeClip with Twist Lock.

Сравнете

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

T50SVCOC18-20A-PA66HS/PA66HIRHS-BK 156-01190

Сравнете

Добавяне към списъка с наблюдавани

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Black (BK) T50SVCOC18-20A-PA66HS/PA66HIRHS-BK 156-01190

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 5000pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

T50SVCOC9-11B-PA66HIRHS/PA66HS-BK 156-01237

Сравнете

Добавяне към списъка с наблюдавани

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 5000pcs.

Сравнете

Добавяне към списъка с наблюдавани

5000 pcs.

Black (BK) T50SVCOC9-11B-PA66HIRHS/PA66HS-BK 156-01237

Fixing tie with pipe/tube holder, ⌀5.0-9.0mm, black, 1000pcs.

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Сравнете

T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384

Сравнете

Добавяне към списъка с наблюдавани

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Сравнете

Fixing tie with pipe/tube holder, ⌀5.0-9.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

T50SVCOC9-11A-PA66HIRHS/PA66HS-BK 156-01236

Сравнете

Добавяне към списъка с наблюдавани

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50SVCOC9-11A-PA66HIRHS/PA66HS-BK 156-01236

Fixing tie with pipe/tube holder, outside serrated, ⌀2.0-35.0mm, black, 500pcs.

Сравнете

T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie with pipe/tube holder, outside serrated, ⌀2.0-35.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Сравнете

QGDHC5.2-8.0M-PA66W-BK 151-04088

Сравнете

Добавяне към списъка с наблюдавани

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Сравнете

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

SBT120-M12-PA66HSUV-BK 157-00021

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Сравнете

Добавяне към списъка с наблюдавани

25 pcs.

Black (BK) SBT120-M12-PA66HSUV-BK 157-00021

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

T50SOSSBD-M6-PA66HSUV-BK 157-00038

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

T50SOSSBD-M10-PA66HSW-BK 157-00040

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

T50SOSSBU-M6-PA66HSUV-GY 157-00065

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

T50SOSSBU-M8/10 for bundles which run below the stud.

Сравнете

T50SOSSBU-M10-PA66HSW-GY 157-00067

Сравнете

Добавяне към списъка с наблюдавани

T50SOSSBU-M8/10 for bundles which run below the stud.

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067

Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000

Offset design positions bundles away from obstructions, heat or sources of abrasion.

Сравнете

T50ROSLPM8SMSO25-PA46-BN 157-00361

Сравнете

Добавяне към списъка с наблюдавани

Offset design positions bundles away from obstructions, heat or sources of abrasion.

Сравнете

Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000

Сравнете

Добавяне към списъка с наблюдавани

2000 pcs.

Brown (BN) T50ROSLPM8SMSO25-PA46-BN 157-00361

Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm

Сравнете

RA13-PA66-BK 151-00121

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) RA13-PA66-BK 151-00121

Fixing tie with pipe/tube holder, ⌀30.0mm, black, 500pcs.

Two Piece Fixing Tie T50RCTC5-9FT7 is used when a tubing needs to be fixed in addition to a cable bundle.

Сравнете

T50SCTC5-9FT7-PA66HS/PA66HIRHS-BK 156-01551

Сравнете

Добавяне към списъка с наблюдавани

Two Piece Fixing Tie T50RCTC5-9FT7 is used when a tubing needs to be fixed in addition to a cable bundle.

Сравнете

Fixing tie with pipe/tube holder, ⌀30.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50SCTC5-9FT7-PA66HS/PA66HIRHS-BK 156-01551

Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

FBB100M-PA66HS-BK 150-29100

Сравнете

Добавяне към списъка с наблюдавани

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) FBB100M-PA66HS-BK 150-29100

Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

FBB185M-PA66HS-BK 150-29180

Сравнете

Добавяне към списъка с наблюдавани

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) FBB185M-PA66HS-BK 150-29180

Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.

SBR8S for M8 threaded studs.

Сравнете

SBR8S-PA46-GY 131-60058

Сравнете

Добавяне към списъка с наблюдавани

SBR8S for M8 threaded studs.

Сравнете

Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Grey (GY) SBR8S-PA46-GY 131-60058

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

WSI250-PA66HIRHSUV-BK 157-00401

Сравнете

Добавяне към списъка с наблюдавани

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Сравнете

Добавяне към списъка с наблюдавани

300 pcs.

Black (BK) WSI250-PA66HIRHSUV-BK 157-00401

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

WSS8MM-PA66HIRHSW-BK 157-00034

Сравнете

Добавяне към списъка с наблюдавани

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Сравнете

Добавяне към списъка с наблюдавани

300 pcs.

Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

WSI8MM-PA66HIRHSUV-BK 157-00035

Сравнете

Добавяне към списъка с наблюдавани

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Сравнете

Добавяне към списъка с наблюдавани

300 pcs.

Black (BK) WSI8MM-PA66HIRHSUV-BK 157-00035

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.

Head allows for a 0.2

Сравнете

T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151

Сравнете

Добавяне към списъка с наблюдавани

Head allows for a 0.2

Сравнете

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 bag

Grey (GY) T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151

Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.

Сравнете

T60ROSSB6HEC-PA66HS-BK 157-00101

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T60ROSSB6HEC-PA66HS-BK 157-00101

Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.

Сравнете

ATSFT6LG-PA66HIRHS-BK 102-67062

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.

Сравнете

Добавяне към списъка с наблюдавани

2000 pcs.

Black (BK) ATSFT6LG-PA66HIRHS-BK 102-67062

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm, nom⌀=15.0 mm - 19.00 mm

Open Pipe Clip LOC15-19FTOVAL.

Сравнете

LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049

Сравнете

Добавяне към списъка с наблюдавани

Open Pipe Clip LOC15-19FTOVAL.

Сравнете

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm, nom⌀=15.0 mm - 19.00 mm

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

LOC1014FT9x12 locking clamp.

Сравнете

LOC1014FT9x12-PA66HIRHSUV-BK 151-02218

Сравнете

Добавяне към списъка с наблюдавани

LOC1014FT9x12 locking clamp.

Сравнете

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02218

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm

Сравнете

MOC12FTOVAL-PA66HIRHSUV-BK 151-01759

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm

Сравнете

Добавяне към списъка с наблюдавани

2000 pcs.

Black (BK) MOC12FTOVAL-PA66HIRHSUV-BK 151-01759

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Сравнете

EC1-3SPDHC6-7-PA11/C75S-BK 151-04387

Сравнете

Добавяне към списъка с наблюдавани

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Сравнете

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) EC1-3SPDHC6-7-PA11/C75S-BK 151-04387

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Сравнете

EC1-3SVDHC6-7-PA11/C75S-BK 151-04529

Сравнете

Добавяне към списъка с наблюдавани

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Сравнете

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) EC1-3SVDHC6-7-PA11/C75S-BK 151-04529

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Сравнете

IRCBMB5A-PA66HIRHSUV-BK 156-02634

Сравнете

Добавяне към списъка с наблюдавани

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02634

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Сравнете

RB5-PA66-BK 151-14000

Сравнете

Добавяне към списъка с наблюдавани

RB5 self-adhesive clip for a quick and easy installation.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) RB5-PA66-BK 151-14000

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

SolidTack Clip RB8APT with special adhesive.

Сравнете

RB8APT-PA66-BK 151-00497

Сравнете

Добавяне към списъка с наблюдавани

SolidTack Clip RB8APT with special adhesive.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) RB8APT-PA66-BK 151-00497

Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm

RB20 self-adhesive clip for a quick and easy installation.

Сравнете

RB20-PA66HIRHS-BK 151-00831

Сравнете

Добавяне към списъка с наблюдавани

RB20 self-adhesive clip for a quick and easy installation.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) RB20-PA66HIRHS-BK 151-00831

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.

CNCTC8FT6.5LG Clamps.

Сравнете

CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177

Сравнете

Добавяне към списъка с наблюдавани

CNCTC8FT6.5LG Clamps.

Сравнете

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Blue (BU) CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.

The tubing is clicked into the CTC clamp and is held firmly.

Сравнете

CTC8FT6-PA66HIRHS-BK 151-01543

Сравнете

Добавяне към списъка с наблюдавани

The tubing is clicked into the CTC clamp and is held firmly.

Сравнете

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) CTC8FT6-PA66HIRHS-BK 151-01543

Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black

Сравнете

AHC336FT6LG-PA66HIRHS-BK 151-01376

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black

Сравнете

Добавяне към списъка с наблюдавани

700 pcs.

Black (BK) AHC336FT6LG-PA66HIRHS-BK 151-01376

Connector clip for edge, black, 500pcs.

Сравнете

CCIIEC6-MOD-PA66HIRHS-BK 151-01124

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Connector clip for edge, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) CCIIEC6-MOD-PA66HIRHS-BK 151-01124

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Сравнете

SRC150M8-PA6GF30-BK 156-02742

Сравнете

Добавяне към списъка с наблюдавани

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Сравнете

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Сравнете

Добавяне към списъка с наблюдавани

150

Black (BK) SRC150M8-PA6GF30-BK 156-02742

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie with pipe/tube holder, inside serrated, ⌀5-30mm, black, 100pcs.

Сравнете

T30ROC5J-PA66HSUV-BK 156-00520

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀5-30mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) T30ROC5J-PA66HSUV-BK 156-00520

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

H7P-PA66HS-BK 211-60006

Сравнете

Добавяне към списъка с наблюдавани

Designed with radiused edges to prevent chafing and cutting into insulation.

Сравнете

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) H7P-PA66HS-BK 211-60006

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU11-AL-NA 211-10110

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU17C-AL/CR-BK 211-15170

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU19C-AL/CR-BK 211-15190

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Сравнете

ALU23C-AL/CR-BK 211-15230

Сравнете

Добавяне към списъка с наблюдавани

ALU23C P-Clamp with chloroprene insert.

Сравнете

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU24C-AL/CR-BK 211-15240

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU25C-AL/CR-BK 211-15250

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU26C-AL/CR-BK 211-15260

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU28C-AL/CR-BK 211-15280

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU29C-AL/CR-BK 211-15290

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU30C-AL/CR-BK 211-15300

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU8-AL-NA 211-10080

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.

Сравнете

Halter SFT6.5-PA66HIRHS-BK 133-00067

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067

Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

T30ROC1A-PA66HS/PA66HIRHS-BK 156-00012

Сравнете

Добавяне към списъка с наблюдавани

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T30ROC1A-PA66HS/PA66HIRHS-BK 156-00012

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.

2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.

Сравнете

T50SVCOC10-14-PA46-GY 156-01045

Сравнете

Добавяне към списъка с наблюдавани

2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Grey (GY) T50SVCOC10-14-PA46-GY 156-01045

Fixing tie with pipe/tube holder, ⌀15.0-19.0mm, black, 1000pcs.

Сравнете

T50SMVCLOC15-19-PA66HIRHSUV-BK 156-01690

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie with pipe/tube holder, ⌀15.0-19.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SMVCLOC15-19-PA66HIRHSUV-BK 156-01690

Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Сравнете

T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714

Сравнете

Добавяне към списъка с наблюдавани

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Сравнете

Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714

Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383

Сравнете

Добавяне към списъка с наблюдавани

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383

Corrugated tube clip for stud, nom⌀17.0mm, black, 500pcs.

Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.

Сравнете

CTC17SBS6-PA66HIRHS-BK 151-00010

Сравнете

Добавяне към списъка с наблюдавани

Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.

Сравнете

Corrugated tube clip for stud, nom⌀17.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) CTC17SBS6-PA66HIRHS-BK 151-00010

Fixing tie with pipe/tube holder, ⌀5.0-27.0mm, black, 500pcs.

2-piece fixing ties with arrowhead, with wings and pipe clip.

Сравнете

T50XWPM7.0OC15-18CBTO-SD-PA66HS/PA66HIRHS-BK 156-01035

Сравнете

Добавяне към списъка с наблюдавани

2-piece fixing ties with arrowhead, with wings and pipe clip.

Сравнете

Fixing tie with pipe/tube holder, ⌀5.0-27.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50XWPM7.0OC15-18CBTO-SD-PA66HS/PA66HIRHS-BK 156-01035

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

WSS250-PA66HIRHSUV-BK 157-00400

Сравнете

Добавяне към списъка с наблюдавани

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Сравнете

Добавяне към списъка с наблюдавани

300 pcs.

Black (BK) WSS250-PA66HIRHSUV-BK 157-00400

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

T50SOSSBD-M8-PA66HSW-BK 157-00039

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039

Fixing tie for stud, ⌀3.0-35.0mm, black, 1000pcs.

LFC-Series for routing cables close to the stud.

Сравнете

LFC165-2-PA66HS-BK 157-00047

Сравнете

Добавяне към списъка с наблюдавани

LFC-Series for routing cables close to the stud.

Сравнете

Fixing tie for stud, ⌀3.0-35.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) LFC165-2-PA66HS-BK 157-00047

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

T50SOSSBU-M8-PA66HSW-GY 157-00066

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066

Fixing tie for stud, inside serrated, ⌀6.0-26.0mm, black, 560pcs.

LFC165-2 for bundle diameters up to 35.0 mm.

Сравнете

LFC155-PA66-BK 131-60070

Сравнете

Добавяне към списъка с наблюдавани

LFC165-2 for bundle diameters up to 35.0 mm.

Сравнете

Fixing tie for stud, inside serrated, ⌀6.0-26.0mm, black, 560pcs.

Сравнете

Добавяне към списъка с наблюдавани

560 pcs.

Black (BK) LFC155-PA66-BK 131-60070

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

One-piece cable tie with oval stud mount.

Сравнете

T50SOSSB5-HIGH-E-PA66HS-BK 155-05400

Сравнете

Добавяне към списъка с наблюдавани

One-piece cable tie with oval stud mount.

Сравнете

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50SOSSB5-HIGH-E-PA66HS-BK 155-05400

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.

CNCTC8FT6.5LG Clamps.

Сравнете

CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038

Сравнете

Добавяне към списъка с наблюдавани

CNCTC8FT6.5LG Clamps.

Сравнете

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038

Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.

Сравнете

LC9FTOVAL-PA66HIRHS-BK 151-01880

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) LC9FTOVAL-PA66HIRHS-BK 151-01880

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Сравнете

AHC25FT6LG-PA66HIRHS-BK 151-01198

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Сравнете

Добавяне към списъка с наблюдавани

1300 pcs.

Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198

Fixing element 35x10 mm, high impact modified, heat stabilised, black

Сравнете

AHC223FT6LG-PA66HIRHS-BK 151-01078

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing element 35x10 mm, high impact modified, heat stabilised, black

Сравнете

Добавяне към списъка с наблюдавани

1300 pcs.

Black (BK) AHC223FT6LG-PA66HIRHS-BK 151-01078

Connector clip for edge, black, 1000pcs.

Сравнете

EC45-PA66HIRHS-BK 151-00460

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Connector clip for edge, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) EC45-PA66HIRHS-BK 151-00460

Connector clip for edge, black, 1000pcs.

Сравнете

EC JAE CC-BK 151-00472

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Connector clip for edge, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) EC JAE CC-BK 151-00472

Connector clip for edge, black, 500pcs.

Сравнете

CCEC3.0SV-PA66HIRHS-BK 151-01058

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Connector clip for edge, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) CCEC3.0SV-PA66HIRHS-BK 151-01058

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Сравнете

RB5-PA66-NA 151-14059

Сравнете

Добавяне към списъка с наблюдавани

RB5 self-adhesive clip for a quick and easy installation.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) RB5-PA66-NA 151-14059

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Two RB8 adhesive cable clamps shown.

Сравнете

RB8-PA66-NA 151-14089

Сравнете

Добавяне към списъка с наблюдавани

Two RB8 adhesive cable clamps shown.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Сравнете

Добавяне към списъка с наблюдавани

5000 pcs.

Natural (NA) RB8-PA66-NA 151-14089

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Two RB8 adhesive cable clamps shown.

Сравнете

RB8-PA66-NA 151-13606

Сравнете

Добавяне към списъка с наблюдавани

Two RB8 adhesive cable clamps shown.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) RB8-PA66-NA 151-13606

Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Сравнете

RB14-PA66-BK 151-00502

Сравнете

Добавяне към списъка с наблюдавани

RB14 self-adhesive clip for a quick and easy installation.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm

Сравнете

Добавяне към списъка с наблюдавани

200 pcs.

Black (BK) RB14-PA66-BK 151-00502

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Сравнете

RB14-PA66-NA 151-00505

Сравнете

Добавяне към списъка с наблюдавани

RB14 self-adhesive clip for a quick and easy installation.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) RB14-PA66-NA 151-00505

Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Self adhesive one piece fixing clips RA- & RB-Series.

Сравнете

RA18-PA66-NA 151-13119

Сравнете

Добавяне към списъка с наблюдавани

Self adhesive one piece fixing clips RA- & RB-Series.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) RA18-PA66-NA 151-13119

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Self adhesive one piece fixing clips RA- & RB-Series.

Сравнете

RA3-PA66-NA 151-13018

Сравнете

Добавяне към списъка с наблюдавани

Self adhesive one piece fixing clips RA- & RB-Series.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) RA3-PA66-NA 151-13018

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137

Сравнете

Добавяне към списъка с наблюдавани

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Black (BK) T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.

Сравнете

T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Black (BK) T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303

Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm

Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.

Сравнете

TY8H1S-PA66-NA 151-12819

Сравнете

Добавяне към списъка с наблюдавани

Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.

Сравнете

Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) TY8H1S-PA66-NA 151-12819

Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.

Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.

Сравнете

T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036

Сравнете

Добавяне към списъка с наблюдавани

Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.

Сравнете

Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU10-AL-NA 211-10100

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU11C-AL/CR-BK 211-15110

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU13C-AL/CR-BK 211-15130

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU14C-AL/CR-BK 211-15140

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU16C-AL/CR-BK 211-15160

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU18C-AL/CR-BK 211-15180

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU20C-AL/CR-BK 211-15200

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU22C-AL/CR-BK 211-15220

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Pезултати за „cable holder“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Дистрибутори Контакт

‹ › ×