Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
18/09/2025

Pезултати за „GL Series Galvalok“ в Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

Моля обърнете внимание:  Търсената от вас комбинация от термини не връща съответстващи резултати.  По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

621 продукти
Нулиране на всички
Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Сравнете
Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.
SNP12A-PA66GF13-BK 190-00254
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SNP12A-PA66GF13-BK 190-00254
Plastic hose clamp, ⌀18.5-21.0mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Сравнете
Plastic hose clamp, ⌀18.5-21.0mm, black, 100pcs.
SNP14A-PA66GF13-BK 190-00300
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SNP14A-PA66GF13-BK 190-00300
Bundling clip for edge, L=39.0mm, black, 500pcs.
Bundling Clip for edges 1.5 - 4 mm. Designed for our Autotools.
Сравнете
Bundling clip for edge, L=39.0mm, black, 500pcs.
ATSBCEC35-PA66HIRHS-BK 102-68355
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) ATSBCEC35-PA66HIRHS-BK 102-68355
Bundling clip for edge, L=39.0mm, black, 500pcs.
Bundling Clip for edges 1.5 - 4 mm. Designed for our Autotools.
Сравнете
Bundling clip for edge, L=39.0mm, black, 500pcs.
ATSBCEC36-PA66HIRHS-BK 102-68365
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) ATSBCEC36-PA66HIRHS-BK 102-68365
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Suitable for low vibration routing of cables and tubes with larger bundling diameters.
Сравнете
Connector clip for edge, EWCAP-005-11, black, 500pcs.
EC42-PA66HIRHS-BK 151-00429
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC42-PA66HIRHS-BK 151-00429
Bundling clip for hole (round), L=50.0mm, black, 4000
The 90-degree configuration of this mini channel provides routing for a wire harness around a corner.
Сравнете
Bundling clip for hole (round), L=50.0mm, black, 4000
BC90FT6-PA66HIRHSUV-BK 151-00993
Сравнете
Добавяне към списъка с наблюдавани
4000
Black (BK) BC90FT6-PA66HIRHSUV-BK 151-00993
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
Сравнете
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
BC90FT6B-PA66HIRHSUV-BK 151-01051
Сравнете
Добавяне към списъка с наблюдавани
4000 pcs.
Black (BK) BC90FT6B-PA66HIRHSUV-BK 151-01051
Cable clip for hole (round), T=0.7-2.2mm, ⌀6.2 - 6.7 mm, Dmin=3.0mm, Dmax=13.0mm
Automatic Harness Clip Family for oval holes.
Сравнете
Cable clip for hole (round), T=0.7-2.2mm, ⌀6.2 - 6.7 mm, Dmin=3.0mm, Dmax=13.0mm
AHC1AH-PA66HIRHS-BK 151-02874
Сравнете
Добавяне към списъка с наблюдавани
1500 pcs.
Black (BK) AHC1AH-PA66HIRHS-BK 151-02874
Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Сравнете
Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3EH2-PA66HIRHS-BK 151-00928
Сравнете
Добавяне към списъка с наблюдавани
800 pcs.
Black (BK) AHC3EH2-PA66HIRHS-BK 151-00928
Cable clip for stud, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Сравнете
Cable clip for stud, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
IPC13P-PA66-BK 151-00868
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) IPC13P-PA66-BK 151-00868
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
Clips interlock to expand installation options.
Сравнете
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
IPC23P-PA66-BK 151-00869
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) IPC23P-PA66-BK 151-00869
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EdgeClip with Twist Lock.
Сравнете
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Сравнете
Cable clip for hole (round), ⌀4.8 mm
C2-PA6HIR-BK 201-10020
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) C2-PA6HIR-BK 201-10020
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Сравнете
Cable clip for hole (round)
R3-PVC-BK 201-20030
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) R3-PVC-BK 201-20030
Connector clip for connector/for hole (oval), black, 4000pcs.
Connector clip with fir tree includes clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for connector/for hole (oval), black, 4000pcs.
CC12-PA66HIRHSUV-BK 151-01136
Сравнете
Добавяне към списъка с наблюдавани
4000 pcs.
Black (BK) CC12-PA66HIRHSUV-BK 151-01136
Connector clip for hole (oval), black, 4000pcs.
Connector clip designed to meet USCAR EWCAP -005-11 clip slot specifications.
Сравнете
Connector clip for hole (oval), black, 4000pcs.
CCOVAL5-PA66HIRHSUV-BK 151-01286
Сравнете
Добавяне към списъка с наблюдавани
4000 pcs.
Black (BK) CCOVAL5-PA66HIRHSUV-BK 151-01286
Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Сравнете
Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.
SNP12(E)-POM-NA 191-10129
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) SNP12(E)-POM-NA 191-10129
Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.
Completely reusable - will not rust or corrode.
Сравнете
Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.
SNP1-PA66GF13-BK 192-10010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SNP1-PA66GF13-BK 192-10010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.
SNP - Snapper Hose Clips range.
Сравнете
Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.
SNP2(E)-POM-NA 191-10029
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) SNP2(E)-POM-NA 191-10029
Plastic hose clamp, ⌀22.7-24.7mm, natural, 500pcs.
SNP - Snapper Hose Clips range.
Сравнете
Plastic hose clamp, ⌀22.7-24.7mm, natural, 500pcs.
SNP20(E)-POM-NA 191-10209
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) SNP20(E)-POM-NA 191-10209
Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.
Completely reusable - will not rust or corrode.
Сравнете
Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.
SNP2-PA66GF13-BK 192-10020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SNP2-PA66GF13-BK 192-10020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Сравнете
Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.
SNP3(E)-POM-NA 191-10039
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) SNP3(E)-POM-NA 191-10039
Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Сравнете
Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.
SNP4-PA66GF13-BK 192-10040
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SNP4-PA66GF13-BK 192-10040
Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Сравнете
Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.
SNP6-PA66GF13-BK 192-10060
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SNP6-PA66GF13-BK 192-10060
Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Сравнете
Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.
SNP8-PA66GF13-BK 192-10080
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SNP8-PA66GF13-BK 192-10080
Bundling clip for edge, L=50.0mm, SO=17.25mm, black, 5000pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Сравнете
Bundling clip for edge, L=50.0mm, SO=17.25mm, black, 5000pcs.
EC48-PA66HIRHSUV-BK 151-01206
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) EC48-PA66HIRHSUV-BK 151-01206
Bundling clip for hole (round), L=55.0mm, black, 500pcs.
Сравнете
Bundling clip for hole (round), L=55.0mm, black, 500pcs.
BCSFT6.5 16-3MD-PA66HIRHS-BK 155-11601
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) BCSFT6.5 16-3MD-PA66HIRHS-BK 155-11601
Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm
High-performing oval fir trees ensure anti-twist protection.
Сравнете
Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm
IRCDFTOVAL-PA66HIRHSUV-BK 156-02648
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) IRCDFTOVAL-PA66HIRHSUV-BK 156-02648
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Сравнете
Connector clip for edge, EWCAP-005-11, black, 500pcs.
EC43-PA66HIRHS-BK 151-00430
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC43-PA66HIRHS-BK 151-00430
Connector clip, EWCAP-005-7, black, 5000pcs.
Сравнете
Connector clip, EWCAP-005-7, black, 5000pcs.
EC54-PA66HIRHSUV-BK 151-01042
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) EC54-PA66HIRHSUV-BK 151-01042
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M
Сравнете
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M-PA66HIRHS-NA 151-02227
Сравнете
Добавяне към списъка с наблюдавани
20000 pcs.
Natural (NA) BCOWFT6M-PA66HIRHS-NA 151-02227
Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm
KK1-PA6HIR-BK 234-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK1-PA6HIR-BK 234-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
Fixing element for convoluted tubes 22 mm with arrow head for oval holes 6.2 x 12.2 mm.
Сравнете
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
RCC D21-PA66HIRHS-BK 150-92300
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RCC D21-PA66HIRHS-BK 150-92300
Corrugated tube clip for hole (oval), nom⌀24.0mm, black, 100pcs.
Simple and secure installation of pipes or hoses to panels.
Сравнете
Corrugated tube clip for hole (oval), nom⌀24.0mm, black, 100pcs.
RCC D24-PA66HIRHS-BK 151-02266
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RCC D24-PA66HIRHS-BK 151-02266
Cable clip for stud, Dmin=27.0mm, Dmax=36.0mm
Clips can be connected to each other to create a chain of cable harnesses.
Сравнете
Cable clip for stud, Dmin=27.0mm, Dmax=36.0mm
IAHC4T-PA66HIRHS-BK 151-00207
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) IAHC4T-PA66HIRHS-BK 151-00207
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Сравнете
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
IPC13P-PA66-BK 151-14132
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) IPC13P-PA66-BK 151-14132
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EdgeClip cable and tube clips are suitable for the low-vibration routing of cables and tubes with larger bundle diameters.
Сравнете
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EC27-PA66HIRHS-BK 151-00161
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC27-PA66HIRHS-BK 151-00161
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Сравнете
Cable clip for hole (round), ⌀4.8 mm
C1-PA6HIR-BK 201-10010
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) C1-PA6HIR-BK 201-10010
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Сравнете
Cable clip for hole (round), ⌀4.8 mm
C3-PA6HIR-BK 201-10030
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) C3-PA6HIR-BK 201-10030
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Сравнете
Cable clip for hole (round)
R1-PVC-BK 201-20010
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) R1-PVC-BK 201-20010
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Сравнете
Cable clip for hole (round)
R2-PVC-BK 201-20020
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) R2-PVC-BK 201-20020
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
CCOVAL3-PA66HIRHSUV-BK 151-01244
Сравнете
Добавяне към списъка с наблюдавани
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), black, 5000pcs.
CCOVAL4-PA66HIRHSUV-BK 151-01246
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Сравнете
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
BC2212-PA66HIRHS-BK 151-00017
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Сравнете
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Сравнете
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
SC6.6-PA66HIRHSUV-BK 151-00927
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Сравнете
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CC11-PA66HIRHSUV-BK 151-01144
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Connector clip, EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Сравнете
Connector clip, EWCAP-005-11, black, 5000pcs.
CC16-PA66HIRHSUV-BK 151-01297
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CC16-PA66HIRHSUV-BK 151-01297
Connector clip for hole (oval)/for connector, black, 1000pcs.
For a secure fixation simply push the connector by hand on our Connector Clip YCCFT62x122.
Сравнете
Connector clip for hole (oval)/for connector, black, 1000pcs.
YCCFT62x122-PA66HIRHS-BK 151-00180
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) YCCFT62x122-PA66HIRHS-BK 151-00180
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Сравнете
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
CCEC6-PA66HIRHS-BK 150-92600
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
Bundling Clip for round holes 6.5 mm.
Сравнете
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
TC2FT6LG-PA66HIRHS-NA 151-00020
Сравнете
Добавяне към списъка с наблюдавани
10000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00020
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
Сравнете
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
CCOVAL2-PA66HIRHSUV-BK 151-01108
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL2-PA66HIRHSUV-BK 151-01108
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Сравнете
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC14-PA66HIRHS-BK 151-03404
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Bundling clip for edge, L=46.5mm, black, 500pcs.
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Сравнете
Bundling clip for edge, L=46.5mm, black, 500pcs.
EC17-PA66HIRHS-BK 151-03403
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC17-PA66HIRHS-BK 151-03403
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
Oval fir tree firmly secures clip to mounting surface.
Сравнете
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
Сравнете
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Сравнете
Добавяне към списъка с наблюдавани
90 pcs.
Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
Double-compression design can accommodate up to 2 wires or cables of varying sizes.
Сравнете
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
MSC2-SS304-ML 151-02320
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Metal (ML) MSC2-SS304-ML 151-02320
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CCOVAL-PA66HIRHSUV-BK 151-00925
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL-PA66HIRHSUV-BK 151-00925
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
Connector clip designed to meet USCAR EWCAP -005-11 clip slot specifications.
Сравнете
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
CCOVAL6-PA66HIRHSUV-BK 151-01033
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) CCOVAL6-PA66HIRHSUV-BK 151-01033
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Сравнете
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC15-PA66HIRHS-BK 151-03401
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC15-PA66HIRHS-BK 151-03401
Connector clip for hole (round), black, 500pcs.
Connector Clip for Connectors with AMP connection, with fir tree for round holes.
Сравнете
Connector clip for hole (round), black, 500pcs.
FT6LG-AMP-PA66HIRHS-BK 155-03800
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) FT6LG-AMP-PA66HIRHS-BK 155-03800
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Сравнете
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
TC5FT6S-PA66HIRHS-BK 150-95500
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) TC5FT6S-PA66HIRHS-BK 150-95500

Pезултати за „GL Series Galvalok“ в Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 14/09/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.287) | Актуализиране: 14/09/2025 | Настройките за поверителност
Дистрибутори Контакт