Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
21/08/2025

Pезултати за „cable holder“ в Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

152 продукти
Нулиране на всички
Cable clip with pipe/tube holder, Dmax=10.5mm
Сравнете
Cable clip with pipe/tube holder, Dmax=10.5mm
IPC10PIPC10P-PA6-BK 156-00118
Сравнете
Добавяне към списъка с наблюдавани
2500 pcs.
Black (BK) IPC10PIPC10P-PA6-BK 156-00118
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm
Сравнете
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm
ICD5x10FT6LGSTUD5-PA66HIRHS-BK 156-00314
Сравнете
Добавяне към списъка с наблюдавани
2000 pcs.
Black (BK) ICD5x10FT6LGSTUD5-PA66HIRHS-BK 156-00314
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm, Dmin=8mm, Dmax=12mm
Сравнете
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm, Dmin=8mm, Dmax=12mm
ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Сравнете
Добавяне към списъка с наблюдавани
1500 pcs.
Black (BK) ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6-PA66-BK 151-00740
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RA6-PA66-BK 151-00740
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-BK 151-00739
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RA18-PA66-BK 151-00739
P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, natural, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, natural, 100pcs.
NX0-PA66-NA 211-00242
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NX0-PA66-NA 211-00242
P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.
NX0-PA66-BK 211-00254
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NX0-PA66-BK 211-00254
P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, natural, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, natural, 100pcs.
NX1-PA66-NA 211-00237
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NX1-PA66-NA 211-00237
P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.
NX1-PA66-BK 211-00246
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NX1-PA66-BK 211-00246
P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, natural, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, natural, 100pcs.
NX3-PA66-NA 211-00234
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NX3-PA66-NA 211-00234
P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.
NX3-PA66-BK 211-00248
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NX3-PA66-BK 211-00248
P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, natural, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, natural, 100pcs.
NX4-PA66-NA 211-00235
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NX4-PA66-NA 211-00235
P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.
NX4-PA66-BK 211-00249
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NX4-PA66-BK 211-00249
P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, natural, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, natural, 100pcs.
NX6-PA66-NA 211-00236
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NX6-PA66-NA 211-00236
P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip, NX-Series.
Сравнете
P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.
NX6-PA66-BK 211-00256
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NX6-PA66-BK 211-00256
P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, natural, 100pcs.
NX1A-PA66-NA 211-00238
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NX1A-PA66-NA 211-00238
P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.
NX1A-PA66-BK 211-00247
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NX1A-PA66-BK 211-00247
P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, natural, 100pcs.
NXR8-PA66-NA 211-00239
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NXR8-PA66-NA 211-00239
P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, black, 100pcs.
NXR8-PA66-BK 211-00250
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NXR8-PA66-BK 211-00250
P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, natural, 100pcs.
NXR11-PA66-NA 211-00240
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NXR11-PA66-NA 211-00240
P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, black, 100pcs.
NXR11-PA66-BK 211-00251
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NXR11-PA66-BK 211-00251
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, natural, 100pcs.
NXR14-PA66-NA 211-00241
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NXR14-PA66-NA 211-00241
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
NXR14-PA66-BK 211-00252
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NXR14-PA66-BK 211-00252
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
NXR14-PA66W-BK 211-00255
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NXR14-PA66W-BK 211-00255
P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, natural, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, natural, 100pcs.
NXR16-PA66-NA 211-00243
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NXR16-PA66-NA 211-00243
P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, black, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, black, 100pcs.
NXR16-PA66-BK 211-00253
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) NXR16-PA66-BK 211-00253
P-clamp closed, Dmin=33.3mm, Dmax=38.1mm, ⌀5.7 mm, natural, 100pcs.
P-Clip NXR-Series.
Сравнете
P-clamp closed, Dmin=33.3mm, Dmax=38.1mm, ⌀5.7 mm, natural, 100pcs.
NXR18-PA66-NA 211-00244
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) NXR18-PA66-NA 211-00244
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6-PA66-NA 151-13403
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) RA6-PA66-NA 151-13403
Cable clip for adhesive use/with pipe/tube holder, Dmax=9mm
Self adhesive one piece fixing clips RA- & RB-Series.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=9mm
RA9APT-A-PA66-BK 151-03396
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RA9APT-A-PA66-BK 151-03396
Cable clip with pipe/tube holder/for hole (round), T=4.5mm, ⌀7.0 mm, Dmax=12mm
Сравнете
Cable clip with pipe/tube holder/for hole (round), T=4.5mm, ⌀7.0 mm, Dmax=12mm
HC512FT7J-PA66HSUV-BK 151-00852
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HC512FT7J-PA66HSUV-BK 151-00852
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), grey, 500pcs.
ConnectorClip for oval holes 7x12 mm, in line.
Сравнете
Connector clip for hole (oval), grey, 500pcs.
CCSFT7x12-PA66HIRHS-GY 151-00222
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) CCSFT7x12-PA66HIRHS-GY 151-00222
Cable clip for adhesive use/with pipe/tube holder, Dmax=16.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=16.0mm
SAC4-ST-WH 151-00400
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC4-ST-WH 151-00400
Cable clip for adhesive use/with pipe/tube holder, Dmax=6mm
Self adhesive one piece fixing clips RA- & RB-Series.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=6mm
RA6APT-A-PA66-BK 151-03393
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RA6APT-A-PA66-BK 151-03393
Cable clip for hole (round)/with pipe/tube holder, ⌀6.1 - 6.9 mm, Dmin=15.0mm, Dmax=19.0mm
The locking clamps of the LOC-Series offer fast and easy bundling of convoluted tubes and pipes.
Сравнете
Cable clip for hole (round)/with pipe/tube holder, ⌀6.1 - 6.9 mm, Dmin=15.0mm, Dmax=19.0mm
LOC15-19FT6LGSO-PA66HIRHSUV-BK 151-01025
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) LOC15-19FT6LGSO-PA66HIRHSUV-BK 151-01025
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Сравнете
Cable clip with pipe/tube holder
DTC18x5-S-PA66HIRHS-BK 156-01311
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x5-S-PA66HIRHS-BK 156-01311
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Сравнете
Cable clip with pipe/tube holder
DTC18x6.5-S-PA66HIRHS-BK 156-01312
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x6.5-S-PA66HIRHS-BK 156-01312
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Сравнете
Cable clip with pipe/tube holder
DTC18x9-11-S-PA66HIRHS-BK 156-01313
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x9-11-S-PA66HIRHS-BK 156-01313
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Сравнете
Cable clip with pipe/tube holder
DTC18x18-20-S-PA66HIRHS-BK 156-01314
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x18-20-S-PA66HIRHS-BK 156-01314
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Сравнете
Cable clip with pipe/tube holder
DTC18x28-S-PA66HIRHS-BK 156-01315
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x28-S-PA66HIRHS-BK 156-01315
Cable clip with pipe/tube holder, Dmin=35.0mm, Dmax=45.0mm
When cable is pushed inside, it automatically activates the locking features which causes it to close.
Сравнете
Cable clip with pipe/tube holder, Dmin=35.0mm, Dmax=45.0mm
IAHC5T-PA66HIRHS-BK 151-00195
Сравнете
Добавяне към списъка с наблюдавани
700 pcs.
Black (BK) IAHC5T-PA66HIRHS-BK 151-00195
Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=3.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=3.0mm
SAC0-ST-WH 151-00033
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC0-ST-WH 151-00033
Bundling clip with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 500pcs.
Сравнете
Bundling clip with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 500pcs.
OCTC1-PA66HIRHS-BK 151-00447
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) OCTC1-PA66HIRHS-BK 151-00447
Cable clip with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm
IAHC elements can be connected.
Сравнете
Cable clip with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm
IAHC1T-PA66HIRHS-BK 151-02883
Сравнете
Добавяне към списъка с наблюдавани
1300 pcs.
Black (BK) IAHC1T-PA66HIRHS-BK 151-02883
Cable clip for adhesive use/with pipe/tube holder, Dmax=4.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=4.0mm
SAC1-ST-WH 151-00100
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC1-ST-WH 151-00100
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
SAC2-ST-WH 151-00200
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC2-ST-WH 151-00200
Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm
SAC3-ST-WH 151-00300
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) SAC3-ST-WH 151-00300
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Сравнете
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EdgeClip with Twist Lock.
Сравнете
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
RA13-PA66-BK 151-00121
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RA13-PA66-BK 151-00121
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.8mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm
The 360 degree enclosure ensures the entire bundle is secure when being routed by the LOC clip.
Сравнете
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.8mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm
LOC15-19FTOVAL-PA46-GY 151-02928
Сравнете
Добавяне към списъка с наблюдавани
1000 Carton
Grey (GY) LOC15-19FTOVAL-PA46-GY 151-02928
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12 locking clamp.
Сравнете
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12-PA66HIRHSUV-BK 151-02501
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02501
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG Clamps.
Сравнете
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Blue (BU) CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Сравнете
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
CTC8FT6-PA66HIRHS-BK 151-01543
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CTC8FT6-PA66HIRHS-BK 151-01543
Fixing element 35x10 mm, high impact modified, heat stabilised, black
Сравнете
Fixing element 35x10 mm, high impact modified, heat stabilised, black
AHC223FT6LG-PA66HIRHS-BK 151-01078
Сравнете
Добавяне към списъка с наблюдавани
1300 pcs.
Black (BK) AHC223FT6LG-PA66HIRHS-BK 151-01078
Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black
Сравнете
Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black
AHC336FT6LG-PA66HIRHS-BK 151-01376
Сравнете
Добавяне към списъка с наблюдавани
700 pcs.
Black (BK) AHC336FT6LG-PA66HIRHS-BK 151-01376
Connecteur clip for edge 1-3mm in PA66HIRHS black - EC JAE CC
Сравнете
Connecteur clip for edge 1-3mm in PA66HIRHS black - EC JAE CC
EC JAE CC 151-00472
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
EC JAE CC 151-00472
Connector clip for edge, black, 500pcs.
Сравнете
Connector clip for edge, black, 500pcs.
CCIIEC6-MOD-PA66HIRHS-BK 151-01124
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CCIIEC6-MOD-PA66HIRHS-BK 151-01124
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5-PA66-BK 151-14000
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) RB5-PA66-BK 151-14000
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14-PA66-BK 151-00502
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Black (BK) RB14-PA66-BK 151-00502
Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm
RB20 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm
RB20-PA66HIRHS-BK 151-00831
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RB20-PA66HIRHS-BK 151-00831
Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Сравнете
Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm
SRC150M8-PA6GF30-BK 156-02742
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
150
Black (BK) SRC150M8-PA6GF30-BK 156-02742
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Сравнете
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Сравнете
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Halter SFT6.5-PA66HIRHS-BK 133-00067
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067
Corrugated tube clip for stud, nom⌀17.0mm, black, 500pcs.
Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.
Сравнете
Corrugated tube clip for stud, nom⌀17.0mm, black, 500pcs.
CTC17SBS6-PA66HIRHS-BK 151-00010
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CTC17SBS6-PA66HIRHS-BK 151-00010
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12 locking clamp.
Сравнете
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12-PA66HIRHSUV-BK 151-02218
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02218
Cable clip
Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.
Сравнете
Cable clip
LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.
CNCTC8FT6.5LG Clamps.
Сравнете
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.
CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038
Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.
Сравнете
Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.
LC9FTOVAL-PA66HIRHS-BK 151-01880
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) LC9FTOVAL-PA66HIRHS-BK 151-01880
Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black
Сравнете
Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black
AHC25FT6LG-PA66HIRHS-BK 151-01198
Сравнете
Добавяне към списъка с наблюдавани
1300 pcs.
Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
IRCBMB5A-PA66HIRHSUV-BK 156-02723
Сравнете
Добавяне към списъка с наблюдавани
25 pcs.
Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02723
Connector clip for edge, black, 1000pcs.
Сравнете
Connector clip for edge, black, 1000pcs.
EC45-PA66HIRHS-BK 151-00460
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) EC45-PA66HIRHS-BK 151-00460
Connector clip for edge, black, 500pcs.
Сравнете
Connector clip for edge, black, 500pcs.
CCEC3.0SV-PA66HIRHS-BK 151-01058
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CCEC3.0SV-PA66HIRHS-BK 151-01058
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5-PA66-NA 151-14059
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) RB5-PA66-NA 151-14059
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
RB8-PA66-NA 151-14089
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Natural (NA) RB8-PA66-NA 151-14089
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Simple snap in design allows for quick and easy installation or removal of cables.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
RB8-PA66-BK 151-13601
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RB8-PA66-BK 151-13601
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
RB8-PA66-NA 151-13606
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) RB8-PA66-NA 151-13606
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14-PA66-NA 151-00505
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) RB14-PA66-NA 151-00505
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Corrugated tube clip for stud, nom⌀10.0mm, black, 500pcs.
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Сравнете
Corrugated tube clip for stud, nom⌀10.0mm, black, 500pcs.
CTC10SBS6-PA66HIRHS-BK 151-00702
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CTC10SBS6-PA66HIRHS-BK 151-00702
Corrugated tube clip for stud, nom⌀13.0mm, black, 500pcs.
Сравнете
Corrugated tube clip for stud, nom⌀13.0mm, black, 500pcs.
CTC13SBS6-PA66HIRHS-BK 151-00703
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CTC13SBS6-PA66HIRHS-BK 151-00703
Corrugated tube clip for stud, nom⌀4.5mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Сравнете
Corrugated tube clip for stud, nom⌀4.5mm, black, 500pcs.
CTC4.5SBS6-PA66HIRHS-BK 151-00700
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CTC4.5SBS6-PA66HIRHS-BK 151-00700

Pезултати за „cable holder“ в Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

Скоба за кабели с храпов механизъм Ratchet P-Clamp за монтиране на кабели и маркучиСкоба за кабели с храпов механизъм Ratchet P Clamp Скоба за кабели с храпов механизъм Ratchet P-Clamp за монтиране на кабели и маркучиСкоба за кабели с храпов механизъм Ratchet P Clamp

Скоба за кабели с храпов механизъм Ratchet P-Clamp за монтиране на кабели и маркучи

Открийте универсалното допълнение към нашата гама от метални и пластмасови кабелни скоби: затягаща p-скоба за кабели и маркучи с тресчотен механизъм Ratchet P-Clamp. Иновативният дизайн дава възможност за надеждно закрепване на проводници, кабели, маркучи и тръби в една точка на монтаж в две отделни работни стъпки. Електроинсталаторите и инженерите по поддръжка вече не трябва неудобно да придържат снопа и скобата в едната ръка, докато ги фиксират с другата.

Скоба за кабели >
Държач за кабел Държач за кабел

Държач за кабел

Търсите сигурен начин за закрепване на кабели или проводници? Нашите пластмасови държачи за кабели са лесни за употреба и подходящи за почти всяко приложение. Научете повече...

Държач за кабел >
Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 17/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Актуализиране: 17/08/2025 | Настройките за поверителност
Дистрибутори Контакт