Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
22/08/2025

Резултати за „D-Clip Series“

3 502 продуктови посещения 1 допълнителен удар
Моля обърнете внимание:  Търсената от вас комбинация от термини не връща съответстващи резултати.  По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

Има резултати в следните категории:
Cable Ties and Fixings

Cable Ties and Fixings  (1877)

Cable Ties Inside Serrated  (455) Cable Ties Outside Serrated  (69) Cable Ties Without Serration  (35) Cable Ties, Releasable  (85) Cable Ties, Stainless Steel  (132) Cable Ties With Fixing Elements  (317) Cable Tie Mounts  (179) Fixing Elements  (130) Clips, Clamps and Plugs  (595)
Cable Ties and Fixings
Cable Ties and Fixings (1877)
Insulation

Insulation  (632)

Heat Shrink Tubing  (288) Heat Shrinkable Moulded Shapes  (333) Insulating tubes  (13)
Insulation
Insulation (632)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (10) Spiral-Reinforced Conduit Systems  (10) Conduit System Accessories  (17) Protective Tubing and Spiral Binding  (20) Expandable Braided Sleeves  (18) Open Woven Sleeves  (18) Grommets  (60) Wiring Ducts and Accessories  (45)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (1)

Industrial Silicones  (1)
Electrical Installation
Electrical Installation (1)
Identification Systems

Identification Systems  (515)

Wire and Cable Markers  (439) Control Panel Labelling  (19) Industrial Identification  (4) RFID tags and cable ties  (52) Security Labeling  (5) Hazardous Area Identification  (1)
Identification Systems
Identification Systems (515)
Application Tooling

Application Tooling  (38)

Automatic Cable Tying System  (1) Application Tooling for Cable Ties  (24) Application Tooling for Snappers  (3) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (2)
Application Tooling
Application Tooling (38)
Connectivity

Connectivity  (260)

Patch Panels  (5) Data Outlets  (5) Fibre  (12) Cable  (64) Accessories  (14) Enclosures  (82) Cablelok  (78) Broadband Accessories  (78)
Connectivity
Connectivity (260)
3 502 продукти
Нулиране на всички
Heat Shrinkable Tubing 2:1 76.0/38.0 green
Сравнете
Heat Shrinkable Tubing 2:1 76.0/38.0 green
HFT-A-76.0/38.0-PO-X-GN 305-76205
Сравнете
Добавяне към списъка с наблюдавани
25 metre
Green (GN) HFT-A-76.0/38.0-PO-X-GN 305-76205
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
Viton®-E for flexibility and protection against aggressive chemicals.
Сравнете
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
VITON®-E-3.2/1.6-FPMX-BK 330-00320
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Black (BK) VITON®-E-3.2/1.6-FPMX-BK 330-00320
Fluoroelastomer Heat Shrinkable Tubing 2:1 9.5/4.8 black
Viton®-E for flexibility and protection against aggressive chemicals.
Сравнете
Fluoroelastomer Heat Shrinkable Tubing 2:1 9.5/4.8 black
VITON®-E-9.5/4.8-FPMX-BK 330-00950
Сравнете
Добавяне към списъка с наблюдавани
25 metre
Black (BK) VITON®-E-9.5/4.8-FPMX-BK 330-00950
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
Viton®-E for flexibility and protection against aggressive chemicals.
Сравнете
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
VITON®-E-25.4/12.7-FPMX-BK 330-02540
Сравнете
Добавяне към списъка с наблюдавани
25 metre
Black (BK) VITON®-E-25.4/12.7-FPMX-BK 330-02540
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
Viton®-E for flexibility and protection against aggressive chemicals.
Сравнете
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
VITON®-E-38.0/19.0-FPMX-BK 330-03810
Сравнете
Добавяне към списъка с наблюдавани
15 metre
Black (BK) VITON®-E-38.0/19.0-FPMX-BK 330-03810
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 3/1 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Сравнете
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 3/1 black
EPS-300-3/1-PO-X-BK 340-03010
Сравнете
Добавяне към списъка с наблюдавани
400 metre
Black (BK) EPS-300-3/1-PO-X-BK 340-03010
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 12/4 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Сравнете
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 12/4 black
EPS-300-12/4-PO-X-BK 340-12040
Сравнете
Добавяне към списъка с наблюдавани
100 metre
Black (BK) EPS-300-12/4-PO-X-BK 340-12040
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 24/8 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Сравнете
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 24/8 black
EPS-300-24/8-PO-X-BK 340-24080
Сравнете
Добавяне към списъка с наблюдавани
25 metre
Black (BK) EPS-300-24/8-PO-X-BK 340-24080
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 40/13 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Сравнете
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 40/13 black
EPS-300-40/13-PO-X-BK 340-40130
Сравнете
Добавяне към списъка с наблюдавани
25 metre
Black (BK) EPS-300-40/13-PO-X-BK 340-40130
Heat Shrink Cable Joint Kit 16-50mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Сравнете
Heat Shrink Cable Joint Kit 16-50mm² with Connector Voltage Range 0.6/1 kV
LVK-C-4x16-50-PO-X-BK 380-04016
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) LVK-C-4x16-50-PO-X-BK 380-04016
Heat Shrink Cable Joint Kit 25-150mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Сравнете
Heat Shrink Cable Joint Kit 25-150mm² with Connector Voltage Range 0.6/1 kV
LVK-C-4x25-150-PO-X-BK 380-04018
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) LVK-C-4x25-150-PO-X-BK 380-04018
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-2.4/1.2-PO-X-CL 305-02419
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-2.4/1.2-PO-X-CL 305-02419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-19.0/9.5-PO-X-CL 305-19019
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Transparent (CL) HFT-B-19.0/9.5-PO-X-CL 305-19019
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-25.4/12.7-PO-X-CL 305-25419
Сравнете
Добавяне към списъка с наблюдавани
25 m
Transparent (CL) HFT-B-25.4/12.7-PO-X-CL 305-25419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-38.0/19.0-PO-X-CL 305-38119
Сравнете
Добавяне към списъка с наблюдавани
50 m
Transparent (CL) HFT-B-38.0/19.0-PO-X-CL 305-38119
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-1.6/0.8-PO-X-CL 305-01619
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-1.6/0.8-PO-X-CL 305-01619
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-3.2/1.6-PO-X-CL 305-03219
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-3.2/1.6-PO-X-CL 305-03219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-4.8/2.4-PO-X-CL 305-04819
Сравнете
Добавяне към списъка с наблюдавани
300 metre
Transparent (CL) HFT-B-4.8/2.4-PO-X-CL 305-04819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-12.7/6.4-PO-X-CL 305-12719
Сравнете
Добавяне към списъка с наблюдавани
50 m
Transparent (CL) HFT-B-12.7/6.4-PO-X-CL 305-12719
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Сравнете
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1612-1-B5W2-PO-X-BK 416-12046
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) 1612-1-B5W2-PO-X-BK 416-12046
End Cap with Thermoplastic Adhesive for Low Voltage black
The appropriate end cap for every cable diameter and cable types.
Сравнете
End Cap with Thermoplastic Adhesive for Low Voltage black
1613-1-B5W2-PO-X-BK 416-13054
Сравнете
Добавяне към списъка с наблюдавани
250 pcs.
Black (BK) 1613-1-B5W2-PO-X-BK 416-13054
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Сравнете
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1615-1-B5W2-PO-X-BK 416-15035
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) 1615-1-B5W2-PO-X-BK 416-15035
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Сравнете
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1617-1-B5W2-PO-X-BK 416-17033
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) 1617-1-B5W2-PO-X-BK 416-17033
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Сравнете
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1614-1-B5W2-PO-X-BK 416-14047
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) 1614-1-B5W2-PO-X-BK 416-14047
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Сравнете
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
SC6.6-PA66HIRHSUV-BK 151-00927
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Сравнете
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
CCOVAL3-PA66HIRHSUV-BK 151-01244
Сравнете
Добавяне към списъка с наблюдавани
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), black, 5000pcs.
CCOVAL4-PA66HIRHSUV-BK 151-01246
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Сравнете
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
BC2212-PA66HIRHS-BK 151-00017
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Сравнете
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC6-SS316L-ML 151-00839
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) SSPC6-SS316L-ML 151-00839
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.
T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Сравнете
Добавяне към списъка с наблюдавани
3000 pcs.
Grey (GY) T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 4000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 4000pcs.
T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145
Сравнете
Добавяне към списъка с наблюдавани
4000 pcs.
Black (BK) T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.
T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169
Сравнете
Добавяне към списъка с наблюдавани
3000 pcs.
Black (BK) T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169
Fixing tie for hole (round), outside serrated, ⌀1.6-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.6-50.0mm, black, 500pcs.
T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
OS170-FT7-PA66-BK 157-00017
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) OS170-FT7-PA66-BK 157-00017
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
OS170-FT7-LH-PA66-BK 157-00019
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) OS170-FT7-LH-PA66-BK 157-00019
Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.
OS170-FT7-LH-PA66HSUV-BK 157-00122
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) OS170-FT7-LH-PA66HSUV-BK 157-00122
Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Сравнете
Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.
T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Сравнете
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Сравнете
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.
T50RSB5-PA66/POM-BK 156-00742
Сравнете
Добавяне към списъка с наблюдавани
250 pcs.
Black (BK) T50RSB5-PA66/POM-BK 156-00742
Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Сравнете
Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.
T50SOSSBS5-PA66HS-BK 156-01746
Сравнете
Добавяне към списъка с наблюдавани
250 pcs.
Black (BK) T50SOSSBS5-PA66HS-BK 156-01746
Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Сравнете
Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.
T50SOSSBH5-PA66HS-BK 156-01744
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSSBH5-PA66HS-BK 156-01744
Fixing tie for hole (round), inside serrated, ⌀1-45.0mm, grey, 1000pcs.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1-45.0mm, grey, 1000pcs.
T50RDHA5.5x15-PA46-GY 156-01203
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Grey (GY) T50RDHA5.5x15-PA46-GY 156-01203
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Сравнете
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Сравнете
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
WSIFT9A-PA66HIRHSUV-BK 156-00069
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSIFT9A-PA66HIRHSUV-BK 156-00069
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
WSRFT9A-PA66HIRHSUV-BK 156-00070
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSRFT9A-PA66HIRHSUV-BK 156-00070
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
WSSFT9B-PA66HIRHSUV-BK 156-00072
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSSFT9B-PA66HIRHSUV-BK 156-00072
Fixing tie for hole (oval), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50RFT6OVAL for oval holes 6.3 x 12.2 mm.
Сравнете
Fixing tie for hole (oval), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50RFT6OVAL-PA66HS/PA66HIRHS-BK 150-37591
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50RFT6OVAL-PA66HS/PA66HIRHS-BK 150-37591
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.
Сравнете
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62x122HR-PA46-GY 156-00446
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50RFT62x122HR-PA46-GY 156-00446
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 3500pcs.
RFID adhesive label – tamper-proof unique identification.
Сравнете
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 3500pcs.
TAGD31T1HF-1601-WH 556-00818
Сравнете
Добавяне към списъка с наблюдавани
3500 pcs.
White (WH) TAGD31T1HF-1601-WH 556-00818
RFID label, 13.56 MHz (HF), white, ⌀40.00mm, 3000pcs.
RFID adhesive label – tamper-proof unique identification.
Сравнете
RFID label, 13.56 MHz (HF), white, ⌀40.00mm, 3000pcs.
TAGD40T1HF-1601-WH 556-00823
Сравнете
Добавяне към списъка с наблюдавани
3000 pcs.
White (WH) TAGD40T1HF-1601-WH 556-00823
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Сравнете
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
TAG45x18T1UHF-1601-WH 556-00839
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
White (WH) TAG45x18T1UHF-1601-WH 556-00839
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Сравнете
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
TAG73x13T1UHF-1601-WH 556-00840
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
White (WH) TAG73x13T1UHF-1601-WH 556-00840
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Сравнете
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
TAGS44T1UHF-1601-WH 556-00845
Сравнете
Добавяне към списъка с наблюдавани
2000 pcs.
White (WH) TAGS44T1UHF-1601-WH 556-00845
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Сравнете
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
TAG110x13T1UHFM-1601-WH 556-00841
Сравнете
Добавяне към списъка с наблюдавани
800 pcs.
White (WH) TAG110x13T1UHFM-1601-WH 556-00841
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
RFID HF labels for easy inventory and asset management.
Сравнете
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
TAG54x24T1UHFM-1601-WH 556-00844
Сравнете
Добавяне към списъка с наблюдавани
450 pcs.
White (WH) TAG54x24T1UHFM-1601-WH 556-00844
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Сравнете
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
TAG55x14T1UHFM-1601-WH 556-00842
Сравнете
Добавяне към списъка с наблюдавани
800 pcs.
White (WH) TAG55x14T1UHFM-1601-WH 556-00842
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03334
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03334
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03364
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03364
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Сравнете
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Сравнете
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Eliminates the need for multiple sizes of fixed diameter clamps.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Secures with a single screw, providing quick installation.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
Secures with a single screw, providing quick installation.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
Simple to install with a screw or rivet.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Сравнете
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
EC33-PA66HIRHS-BK 151-00192
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192
Cable tie mount for adhesive use, Wmax=4.8mm, black, 100pcs.
PMB5 paste adhesive mount for fixing with paste / liquid adhesive.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, black, 100pcs.
PMB5-PA66HS-BK 151-02255
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) PMB5-PA66HS-BK 151-02255
Cable tie mount for adhesive use, Wmax=4.7mm, black, 100pcs.
PMB3 paste adhesive mount for fixing with paste/liquid adhesive.
Сравнете
Cable tie mount for adhesive use, Wmax=4.7mm, black, 100pcs.
PMB3-PA666V0-BK 151-02575
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) PMB3-PA666V0-BK 151-02575
Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 17/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Актуализиране: 17/08/2025 | Настройките за поверителност
Дистрибутори Контакт