Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
19/12/2025

Резултати за „12“

1 799 продуктови посещения 10 допълнителни посещения
Има резултати в следните категории:
Cable Ties and Fixings

Cable Ties and Fixings  (582)

Cable Ties Inside Serrated  (117) Cable Ties Outside Serrated  (3) Cable Ties Without Serration  (32) Cable Ties, Releasable  (9) Cable Ties, Stainless Steel  (34) Cable Ties With Fixing Elements  (226) Cable Tie Mounts  (30) Fixing Elements  (39) Clips, Clamps and Plugs  (127)
Cable Ties and Fixings
Cable Ties and Fixings (582)
Insulation

Insulation  (631)

Heat Shrink Tubing  (488) Heat Shrinkable Moulded Shapes  (131) Insulating tubes  (15)
Insulation
Insulation (631)
Cable Protection Systems

Cable Protection Systems  (329)

Non-Metallic Conduit Systems  (101) Metallic Conduit Systems  (51) Spiral-Reinforced Conduit Systems  (11) Conduit System Accessories  (31) Protective Tubing and Spiral Binding  (19) Expandable Braided Sleeves  (33) Open Woven Sleeves  (48) Burst Protective Sleeves  (1) Electromagnetic Shielding Sleeves  (11) Edge Protection  (15) Grommets  (41) Wiring Ducts and Accessories  (12)
Cable Protection Systems
Cable Protection Systems (329)
Electrical Installation

Electrical Installation  (26)

Wire Connectors  (13) Electrical Tapes  (3) Cast Resin Technology  (5) Gel Technology  (2) Chemicals  (1) Cable Entry Systems  (2)
Electrical Installation
Electrical Installation (26)
Identification Systems

Identification Systems  (203)

Wire and Cable Markers  (159) Control Panel Labelling  (46) Industrial Identification  (44)
Identification Systems
Identification Systems (203)
Application Tooling

Application Tooling  (30)

Automatic Cable Tying System  (12) Application Tooling for Cable Ties  (9) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (30)
1 799 продукти
Нулиране на всички
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
T120L-PA66HS-NA 111-12449
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Natural (NA) T120L-PA66HS-NA 111-12449
Cable tie inside serrated, 925.0x8.9mm, ⌀8.0-274.3mm, natural, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Сравнете
Cable tie inside serrated, 925.0x8.9mm, ⌀8.0-274.3mm, natural, 25pcs.
T150LL-PA66-NA 111-15719
Сравнете
Добавяне към списъка с наблюдавани
25 pcs.
Natural (NA) T150LL-PA66-NA 111-15719
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Сравнете
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.
Allows multiple cables to be run in parallel.
Сравнете
Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.
MP4M3-PA66-NA 151-24419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) MP4M3-PA66-NA 151-24419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
TF24-19.1/9.5-PO-X-CL 309-31903
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Transparent (CL) TF24-19.1/9.5-PO-X-CL 309-31903
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
TF24-25.4/12.7-PO-X-CL 309-32543
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Transparent (CL) TF24-25.4/12.7-PO-X-CL 309-32543
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
TF24-38.1/19.1-PO-X-CL 309-33813
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Transparent (CL) TF24-38.1/19.1-PO-X-CL 309-33813
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 transparent
TF24-50.8/25.4-PO-X-CL 309-35083
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Transparent (CL) TF24-50.8/25.4-PO-X-CL 309-35083
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-2.4/1.2-PO-X-CL 305-02419
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-2.4/1.2-PO-X-CL 305-02419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-19.0/9.5-PO-X-CL 305-19019
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Transparent (CL) HFT-B-19.0/9.5-PO-X-CL 305-19019
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-25.4/12.7-PO-X-CL 305-25419
Сравнете
Добавяне към списъка с наблюдавани
25 m
Transparent (CL) HFT-B-25.4/12.7-PO-X-CL 305-25419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-38.0/19.0-PO-X-CL 305-38119
Сравнете
Добавяне към списъка с наблюдавани
50 m
Transparent (CL) HFT-B-38.0/19.0-PO-X-CL 305-38119
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-1.6/0.8-PO-X-CL 305-01619
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-1.6/0.8-PO-X-CL 305-01619
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-3.2/1.6-PO-X-CL 305-03219
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-3.2/1.6-PO-X-CL 305-03219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-4.8/2.4-PO-X-CL 305-04819
Сравнете
Добавяне към списъка с наблюдавани
300 metre
Transparent (CL) HFT-B-4.8/2.4-PO-X-CL 305-04819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-12.7/6.4-PO-X-CL 305-12719
Сравнете
Добавяне към списъка с наблюдавани
50 m
Transparent (CL) HFT-B-12.7/6.4-PO-X-CL 305-12719
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 3,2/1,6
Thin wall TE28 tubing.
Сравнете
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 3,2/1,6
TE28 3.2/1.6-POA-BK 342-30010
Сравнете
Добавяне към списъка с наблюдавани
150 metre
Black (BK) TE28 3.2/1.6-POA-BK 342-30010
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 4,8/2,4
Thin wall TE28 tubing.
Сравнете
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 4,8/2,4
TE28 4.8/2.4-POA-BK 342-30020
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Black (BK) TE28 4.8/2.4-POA-BK 342-30020
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 9,5/4,8
Thin wall TE28 tubing.
Сравнете
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 9,5/4,8
TE28 9.5/4.8-POA-BK 342-30040
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Black (BK) TE28 9.5/4.8-POA-BK 342-30040
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 12,7/6,4
Thin wall TE28 tubing.
Сравнете
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 12,7/6,4
TE28 12.7/6.4-POA-BK 342-30050
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Black (BK) TE28 12.7/6.4-POA-BK 342-30050
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 115/34 black
Medium single wall tubing MU47 and dual wall tubing MA47.
Сравнете
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 115/34 black
MU47-115/34-PO-X-BK 323-11150
Сравнете
Добавяне към списъка с наблюдавани
4 pcs.
Black (BK) MU47-115/34-PO-X-BK 323-11150
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 140/42 black
Medium single wall tubing MU47 and dual wall tubing MA47.
Сравнете
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 140/42 black
MU47-140/42-PO-X-BK 323-11400
Сравнете
Добавяне към списъка с наблюдавани
4 pcs.
Black (BK) MU47-140/42-PO-X-BK 323-11400
Heat Shrinkable Tubing 2:1 VG-Norm 3,2/1,6
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 3,2/1,6
SE28 3.2/1.6-POA-BK 342-20000
Сравнете
Добавяне към списъка с наблюдавани
150 metre
Black (BK) SE28 3.2/1.6-POA-BK 342-20000
Heat Shrinkable Tubing 2:1 VG-Norm 4,8/2,4
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 4,8/2,4
SE28 4.8/2.4-POA-BK 342-20010
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Black (BK) SE28 4.8/2.4-POA-BK 342-20010
Heat Shrinkable Tubing 2:1 VG-Norm 12,7/6,4
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 12,7/6,4
SE28 12.7/6.4-POA-BK 342-20040
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Black (BK) SE28 12.7/6.4-POA-BK 342-20040
Heat Shrinkable Tubing 2:1 VG-Norm 25,4/12,7
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 25,4/12,7
SE28 25.4/12.7-POA-BK 342-20060
Сравнете
Добавяне към списъка с наблюдавани
30 metre
Black (BK) SE28 25.4/12.7-POA-BK 342-20060
Heat Shrinkable Tubing 2:1 VG-Norm 51,0/25,4
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 51,0/25,4
SE28 51.0/25.4-POA-BK 342-20080
Сравнете
Добавяне към списъка с наблюдавани
30 metre
Black (BK) SE28 51.0/25.4-POA-BK 342-20080
Heat Shrinkable Tubing 2:1 VG-Norm 76,0/38,0
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 76,0/38,0
SE28 76.0/38.0-POA-BK 342-20090
Сравнете
Добавяне към списъка с наблюдавани
15 metre
Black (BK) SE28 76.0/38.0-POA-BK 342-20090
Heat Shrinkable Tubing 2:1 VG-Norm 101,2/51,0
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 101,2/51,0
SE28 101.2/51.0-POA-BK 342-20100
Сравнете
Добавяне към списъка с наблюдавани
10 metre
Black (BK) SE28 101.2/51.0-POA-BK 342-20100
Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, natural, 100pcs.
T40R-PA66-NA 111-01626
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) T40R-PA66-NA 111-01626
Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, natural, 100pcs.
T50I-PA66HS-NA 111-05259
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) T50I-PA66HS-NA 111-05259
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
T50S-PA66-BK 111-05810
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50S-PA66-BK 111-05810
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
T80L-PA66HS-BK 111-00388
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T80L-PA66HS-BK 111-00388
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, natural, 100pcs.
T120R(E)-PA66HS-NA 111-12059
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) T120R(E)-PA66HS-NA 111-12059
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66W-BK 111-01966
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T120R(E)-PA66W-BK 111-01966
Cable tie inside serrated, 120x4.8mm, ⌀3.0-28.0mm, natural, 200pcs.
Сравнете
Cable tie inside serrated, 120x4.8mm, ⌀3.0-28.0mm, natural, 200pcs.
LK2-PA66-NA 111-60219
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Natural (NA) LK2-PA66-NA 111-60219
Stainless steel cable tie, ball bearing lock, 521x7.9mm, ⌀17-152mm, black, 50pcs.
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Сравнете
Stainless steel cable tie, ball bearing lock, 521x7.9mm, ⌀17-152mm, black, 50pcs.
MBT20HFC-SS316L/SP-BK 111-00296
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) MBT20HFC-SS316L/SP-BK 111-00296
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Сравнете
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
HST4.8-1.6WH-PO-X-WH 553-50177
Сравнете
Добавяне към списъка с наблюдавани
3000 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50177
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Сравнете
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
HST4.8-1.6WH-PO-X-WH 553-50195
Сравнете
Добавяне към списъка с наблюдавани
6400 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50195
Three-pronged plier Dmin=1.25mm, Dmax=1.75mm, 10.5mm, 28mm, metal, 1pc.
Fast, secure application with the NA three-pronged pliers.
Сравнете
Three-pronged plier Dmin=1.25mm, Dmax=1.75mm, 10.5mm, 28mm, metal, 1pc.
NA0/1-MET-ML 621-10001
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Metal (ML) NA0/1-MET-ML 621-10001
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
HFT-A-1.2/0.6-PO-X-BN 305-01201
Сравнете
Добавяне към списъка с наблюдавани
100 metre
Brown (BN) HFT-A-1.2/0.6-PO-X-BN 305-01201
Heat Shrinkable Tubing 2:1 3.2/1.6 green
Сравнете
Heat Shrinkable Tubing 2:1 3.2/1.6 green
HFT-A-3.2/1.6-PO-X-GN 305-03205
Сравнете
Добавяне към списъка с наблюдавани
400 metre
Green (GN) HFT-A-3.2/1.6-PO-X-GN 305-03205
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A conforms to major standards (VG) used in all Defence industries.
Сравнете
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A-4.8/2.4-PO-X-GY 305-04808
Сравнете
Добавяне към списъка с наблюдавани
300 metre
Grey (GY) HFT-A-4.8/2.4-PO-X-GY 305-04808
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
HFT-A-9.5/4.8-PO-X-GN 305-09505
Сравнете
Добавяне към списъка с наблюдавани
150 metre
Green (GN) HFT-A-9.5/4.8-PO-X-GN 305-09505
Heat Shrinkable Tubing 2:1 38.0/19.0 green
Сравнете
Heat Shrinkable Tubing 2:1 38.0/19.0 green
HFT-A-38.0/19.0-PO-X-GN 305-38105
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Green (GN) HFT-A-38.0/19.0-PO-X-GN 305-38105
Heat Shrinkable Tubing 2:1 76.0/38.0 green
Сравнете
Heat Shrinkable Tubing 2:1 76.0/38.0 green
HFT-A-76.0/38.0-PO-X-GN 305-76205
Сравнете
Добавяне към списъка с наблюдавани
25 metre
Green (GN) HFT-A-76.0/38.0-PO-X-GN 305-76205
Heat Shrinkable Tubing 2:1 (6.4/3.2) black
Сравнете
Heat Shrinkable Tubing 2:1 (6.4/3.2) black
PST-H-6.4/3.2-POA-BK 342-20640
Сравнете
Добавяне към списъка с наблюдавани
300 metre
Black (BK) PST-H-6.4/3.2-POA-BK 342-20640
Heat Shrinkable Tubing 2:1 flexible 2.4/1.2 transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible 2.4/1.2 transparent
TF24-2.4/1.2-PO-X-CL 309-40243
Сравнете
Добавяне към списъка с наблюдавани
100 metre
Transparent (CL) TF24-2.4/1.2-PO-X-CL 309-40243
Braided sleeving, abrasion resistant, nom⌀10mm, ⌀7-12mm, black, 100m
HEGPA66 - Extreme abrasion protection sleeve.
Сравнете
Braided sleeving, abrasion resistant, nom⌀10mm, ⌀7-12mm, black, 100m
HEGPA6610-PA66-BK 170-41000
Сравнете
Добавяне към списъка с наблюдавани
100 metre
Black (BK) HEGPA6610-PA66-BK 170-41000
Braided sleeving, abrasion resistant, nom⌀16mm, ⌀12-18mm, black, 50m
HEGPA66 - Extreme abrasion protection sleeve.
Сравнете
Braided sleeving, abrasion resistant, nom⌀16mm, ⌀12-18mm, black, 50m
HEGPA6616-PA66-BK 170-41600
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Black (BK) HEGPA6616-PA66-BK 170-41600
Chloroprene Rubber Tubing 25x2.5mm black
H rubber tubing is highly flexible and easy to apply.
Сравнете
Chloroprene Rubber Tubing 25x2.5mm black
H25X25BK-CR-BK 600-02934
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) H25X25BK-CR-BK 600-02934
Cable grommet, ⌀19.0 mm, black, 500pcs.
Edge Protection Grommet - HV1101.
Сравнете
Cable grommet, ⌀19.0 mm, black, 500pcs.
HV1101-PVC-FR-BK 633-01010
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) HV1101-PVC-FR-BK 633-01010
Cable grommet, ⌀12.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1204.
Сравнете
Cable grommet, ⌀12.0 mm, black, 1000pcs.
HV1204-PVC-FR-BK 633-02040
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV1204-PVC-FR-BK 633-02040
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1210.
Сравнете
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV1210-PVC-FR-BK 633-02100
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV1210-PVC-FR-BK 633-02100
Cable grommet, ⌀10.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1218.
Сравнете
Cable grommet, ⌀10.0 mm, black, 1000pcs.
HV1218-PVC-FR-BK 633-02180
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV1218-PVC-FR-BK 633-02180
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Bend Protection Grommet - HV2101.
Сравнете
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV2101-PVC-FR-BK 632-01010
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV2101-PVC-FR-BK 632-01010
Spiral wrap, nom⌀1.5mm, ⌀1.6-8mm, -60 °C to +80 °C, intermittent +120 °C, natural, 30m
SBPE - Natural PE Spiral Wrap.
Сравнете
Spiral wrap, nom⌀1.5mm, ⌀1.6-8mm, -60 °C to +80 °C, intermittent +120 °C, natural, 30m
SBPE1.5-PE-NA 161-41000
Сравнете
Добавяне към списъка с наблюдавани
30 metre
Natural (NA) SBPE1.5-PE-NA 161-41000
Bundling Clip, round hole 6.4 - 7.1 mm, fir tree, offset, high impact modified, heat stabilised, black
Сравнете
Bundling Clip, round hole 6.4 - 7.1 mm, fir tree, offset, high impact modified, heat stabilised, black
SOC3FT6LG-PA66HIRHS-BK 155-19001
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) SOC3FT6LG-PA66HIRHS-BK 155-19001
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
T18R-PA66-BK 111-01910
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T18R-PA66-BK 111-01910
Fixing tie for edge, outside serrated, ⌀4.0-35.0mm, black, 500pcs.
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-35.0mm, black, 500pcs.
T50SOSEC4A-PA66HS/PA66HIRHS-BK 150-76093
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC4A-PA66HS/PA66HIRHS-BK 150-76093
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 black
Сравнете
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 black
HIS-PACK-3.2/1.6-PO-X-BK 300-30320
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) HIS-PACK-3.2/1.6-PO-X-BK 300-30320
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 black
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 black
HFT-A-12.7/6.4-PO-X-BK 305-12700
Сравнете
Добавяне към списъка с наблюдавани
100 metre
Black (BK) HFT-A-12.7/6.4-PO-X-BK 305-12700
Gel cable joint, 9-16mm, 1 x 10mm² to 1 x 50mm², L=86mm, Polypropylene (PP)/Silicone (SI), green
Gel cable joint Relifix V 150.
Сравнете
Gel cable joint, 9-16mm, 1 x 10mm² to 1 x 50mm², L=86mm, Polypropylene (PP)/Silicone (SI), green
Relifix V150-PP/SI-GN 435-00651
Сравнете
Добавяне към списъка с наблюдавани
1 pack
Green (GN) Relifix V150-PP/SI-GN 435-00651
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6 self-adhesive clip for a quick and easy installation.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Сравнете
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Сравнете
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
T120L-PA66W-BK 111-01701
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) T120L-PA66W-BK 111-01701
Cable tie inside serrated, 387.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
Сравнете
Cable tie inside serrated, 387.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
T120R-PA66W-BK 111-00400
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T120R-PA66W-BK 111-00400
Cable tie inside serrated, 225x7.6mm, ⌀5.0-55.0mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 225x7.6mm, ⌀5.0-55.0mm, natural, 50pcs.
T120S-PA66-NA 111-12829
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Natural (NA) T120S-PA66-NA 111-12829
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Сравнете
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, black, 25pcs.
T150XL-PA66HS-BK 111-15510
Сравнете
Добавяне към списъка с наблюдавани
25 pcs.
Black (BK) T150XL-PA66HS-BK 111-15510
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, yellow, 100pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Сравнете
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, yellow, 100pcs.
T18R-PA66-YE 116-01814
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Yellow (YE) T18R-PA66-YE 116-01814
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Сравнете
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, black, 100pcs.
T18R-PP-BK 111-01917
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T18R-PP-BK 111-01917
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Cable tie mount for screw fixation, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY-Series Mounts with rectangle design, self-adhesive.
Сравнете
Cable tie mount for screw fixation, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1-PA66-NA 151-21319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY3G1-PA66-NA 151-21319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
Cable Tie Mounts NY Series.
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 24/8 green-yellow
TFN21 - available in a wide range of colours and sizes.
Сравнете
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 24/8 green-yellow
TREDUX-24/8-PO-X-GNYE 319-02407
Сравнете
Добавяне към списъка с наблюдавани
5 pcs.
Green-Yellow (GNYE) TREDUX-24/8-PO-X-GNYE 319-02407
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-9.5/4.8-PO-X-CL 305-09519
Сравнете
Добавяне към списъка с наблюдавани
50 metre
Transparent (CL) HFT-B-9.5/4.8-PO-X-CL 305-09519
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (52/15 mm), adhesive lined, black
HellermannTyton RMS - Wrap-around heat shrink cable repair sleeve.
Сравнете
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (52/15 mm), adhesive lined, black
RMS 52-15-PO-X-BK 450-20012
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) RMS 52-15-PO-X-BK 450-20012
Heat Shrinkable Tubing 2:1 VG-Norm 6,4/3,2
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 6,4/3,2
SE28 6.4/3.2-POA-BK 342-20020
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Black (BK) SE28 6.4/3.2-POA-BK 342-20020
Heat Shrinkable Tubing 2:1 VG-Norm 9,5/4,8
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Сравнете
Heat Shrinkable Tubing 2:1 VG-Norm 9,5/4,8
SE28 9.5/4.8-POA-BK 342-20030
Сравнете
Добавяне към списъка с наблюдавани
60 metre
Black (BK) SE28 9.5/4.8-POA-BK 342-20030
Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Актуализиране: 14/12/2025 | Настройките за поверителност
Дистрибутори Контакт