Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
22/08/2025

Results for "cable scout" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

763 products
Reset all
Fixing tie for cable bundles/with pipe/tube holder, ⌀1.0-35.0mm, black, 500pcs.
T50SVC5 rotates in any direction.
Compare
Fixing tie for cable bundles/with pipe/tube holder, ⌀1.0-35.0mm, black, 500pcs.
T50SVC5-PA66HS-BK 156-02007
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC5-PA66HS-BK 156-02007
Fixing tie with pipe/tube holder, ⌀4.0-31.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀4.0-31.0mm, black, 500pcs.
T30ROC1A-PA66HS/PA66HIRHS-BK 156-00689
Compare
Add to watchlist
500 pcs.
Black (BK) T30ROC1A-PA66HS/PA66HIRHS-BK 156-00689
Cable tie inside serrated, 382.0x7.6mm, ⌀3.0-100mm, beige, 50pcs.
Compare
Cable tie inside serrated, 382.0x7.6mm, ⌀3.0-100mm, beige, 50pcs.
AB350-PA66HSW-BGE 111-00780
Compare
Add to watchlist
50 pcs.
Ivory (IV) AB350-PA66HSW-BGE 111-00780
Fixing tie for hole (round), outside serrated, ⌀1.6-35.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.6-35.0mm, black, 500pcs.
T50SOSSFT6.5E-MD-PA66HS-BK 126-00215
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSFT6.5E-MD-PA66HS-BK 126-00215
Fixing tie with pipe/tube holder, ⌀45.0mm, black, 500pcs.
Pipe Clip CBTO, twistable 90°.
Compare
Fixing tie with pipe/tube holder, ⌀45.0mm, black, 500pcs.
T50ROCSG1A-PA66/PA66HIRHS-BK 156-01212
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROCSG1A-PA66/PA66HIRHS-BK 156-01212
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
Compare
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
T50R-PA46-GY 111-00824
Compare
Add to watchlist
100 pcs.
Grey (GY) T50R-PA46-GY 111-00824
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSSBH5SD-PA66HS-BK 156-05905
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSSBH5SD-PA66HS-BK 156-05905
Cable tie mount for stud, Wmax=8.5mm, ⌀5.0 mm, black, 500pcs.
Fixing element for cable ties and stud fixation (5 mm).
Compare
Cable tie mount for stud, Wmax=8.5mm, ⌀5.0 mm, black, 500pcs.
SBH3-PA66-BK 151-02279
Compare
Add to watchlist
500 pcs.
Black (BK) SBH3-PA66-BK 151-02279
Cable clip for stud, ⌀M6
Compare
Cable clip for stud, ⌀M6
DCTC16SBS6-PA66HIRHS/TPE-BK/GN 151-04189
Compare
Add to watchlist
1000 pcs.
Black (BK), Green (GN) DCTC16SBS6-PA66HIRHS/TPE-BK/GN 151-04189
Cable clip for stud, ⌀M6
Compare
Cable clip for stud, ⌀M6
DCTC20SBS6-PA66HIRHS/TPE-BK/GN 151-04190
Compare
Add to watchlist
1000 pcs.
Black (BK), Green (GN) DCTC20SBS6-PA66HIRHS/TPE-BK/GN 151-04190
Bundling clip for hole (round), L=42.0mm, SO=30.0mm, black, 500pcs.
Compare
Bundling clip for hole (round), L=42.0mm, SO=30.0mm, black, 500pcs.
COW30DP7-PA66-BK 151-01398
Compare
Add to watchlist
500 pcs.
Black (BK) COW30DP7-PA66-BK 151-01398
Cable tie outside serrated, 385.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Compare
Cable tie outside serrated, 385.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
T120ROS-PA66HS-BK 118-00066
Compare
Add to watchlist
100 pcs.
Black (BK) T120ROS-PA66HS-BK 118-00066
Cable tie outside serrated, 200.0x3.4mm, ⌀1.6-50.0mm, black, 100pcs.
Compare
Cable tie outside serrated, 200.0x3.4mm, ⌀1.6-50.0mm, black, 100pcs.
T30LOS-PA66HS-BK 118-04900
Compare
Add to watchlist
100 pcs.
Black (BK) T30LOS-PA66HS-BK 118-04900
Cable tie outside serrated, 245.0x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Compare
Cable tie outside serrated, 245.0x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
T50MOS-PA66HS-BK 118-00018
Compare
Add to watchlist
100 pcs.
Black (BK) T50MOS-PA66HS-BK 118-00018
Cable tie inside serrated, 305x4.6mm, ⌀1.5-80mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 305x4.6mm, ⌀1.5-80mm, black, 100pcs.
T50I-PA66HS-BK 111-05250
Compare
Add to watchlist
100 pcs.
Black (BK) T50I-PA66HS-BK 111-05250
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66W-BK 111-04889
Compare
Add to watchlist
100 pcs.
Black (BK) T50R-PA66W-BK 111-04889
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85.0mm, black, 100pcs.
T80I-PA66-BK 111-08210
Compare
Add to watchlist
100 pcs.
Black (BK) T80I-PA66-BK 111-08210
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
T80L-PA66-BK 111-05410
Compare
Add to watchlist
100 pcs.
Black (BK) T80L-PA66-BK 111-05410
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.
Compare
Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.
LK5-PA66-BK 111-60510
Compare
Add to watchlist
50 pcs.
Black (BK) LK5-PA66-BK 111-60510
Fixing tie for hole (round), outside serrated, ⌀1.6-35.0mm, grey, 500pcs.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.6-35.0mm, grey, 500pcs.
T50SOSSFT6.5E-MD-PA66HS-GY 126-00156
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SOSSFT6.5E-MD-PA66HS-GY 126-00156
Fixing tie with pipe/tube holder, inside serrated, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, inside serrated, black, 500pcs.
T50SVCOC19.0-24.5 ST-PA66HS/PA66HIRHS-BK 156-02402
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC19.0-24.5 ST-PA66HS/PA66HIRHS-BK 156-02402
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, natural, 100pcs.
T150R-PA66-NA 111-14819
Compare
Add to watchlist
100 pcs.
Natural (NA) T150R-PA66-NA 111-14819
Bundling clip for hole (round), L=50.0mm, SO=20.0mm, black, 7000pcs.
Standoff bundling clip keeps bundle away from areas that could cause damage due to rubbing.
Compare
Bundling clip for hole (round), L=50.0mm, SO=20.0mm, black, 7000pcs.
CH20D7-PA66HIRHS-BK 151-00968
Compare
Add to watchlist
7000 pcs.
Black (BK) CH20D7-PA66HIRHS-BK 151-00968
Bundling clip for hole (round), L=55.0mm, SO=13.0mm, black, 500pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Bundling clip for hole (round), L=55.0mm, SO=13.0mm, black, 500pcs.
SOC5FT6LG-PA66HIRHS-BK 151-01215
Compare
Add to watchlist
500 pcs.
Black (BK) SOC5FT6LG-PA66HIRHS-BK 151-01215
Bundling clip for hole (round), L=45.0mm, SO=20.3mm, natural, 2000pcs.
Compare
Bundling clip for hole (round), L=45.0mm, SO=20.3mm, natural, 2000pcs.
SOC14FT6-PA66HIRHS-NA 133-01497
Compare
Add to watchlist
2000 pcs.
Natural (NA) SOC14FT6-PA66HIRHS-NA 133-01497
Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35mm, black, 100pcs.
T30R-PA66HS-BK 111-03250
Compare
Add to watchlist
100 pcs.
Black (BK) T30R-PA66HS-BK 111-03250
Cable tie inside serrated, 202.0x4.7mm, ⌀5.0-50.0mm, blue, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 202.0x4.7mm, ⌀5.0-50.0mm, blue, 100pcs.
T50R-E/TFE-BU 111-00732
Compare
Add to watchlist
100 pcs.
Blue (BU) T50R-E/TFE-BU 111-00732
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (oval), L=58.0mm, natural, 8000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Bundling clip for hole (oval), L=58.0mm, natural, 8000pcs.
BCFTOVAL-PA66HIRHS-NA 151-01239
Compare
Add to watchlist
8000 pcs.
Natural (NA) BCFTOVAL-PA66HIRHS-NA 151-01239
Bundling clip for hole (oval), L=38.7mm, natural, 10000pcs.
Bundling clip with oval fir tree provides an uncomplicated method for fastening bundles, hoses, or pipes.
Compare
Bundling clip for hole (oval), L=38.7mm, natural, 10000pcs.
BCFTOVAL2-PA66HIRHS-NA 151-01240
Compare
Add to watchlist
10000 pcs.
Natural (NA) BCFTOVAL2-PA66HIRHS-NA 151-01240
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
Extreme temperature range for excellent performance in a range of environments.
Compare
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
PT220-PEEK-BGE 111-01235
Compare
Add to watchlist
100 pcs.
Beige (BGE) PT220-PEEK-BGE 111-01235
Cable tie outside serrated, 384.0x4.6mm, ⌀1.6-110.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Compare
Cable tie outside serrated, 384.0x4.6mm, ⌀1.6-110.0mm, black, 100pcs.
T50LOS-PA66HS-BK 118-05900
Compare
Add to watchlist
100 pcs.
Black (BK) T50LOS-PA66HS-BK 118-05900
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85.0mm, black, 1000pcs.
T80I-PA66HS-BK 111-08280
Compare
Add to watchlist
1000 pcs.
Black (BK) T80I-PA66HS-BK 111-08280
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 25pcs.
T150L-PA66W-BK 111-15460
Compare
Add to watchlist
25 pcs.
Black (BK) T150L-PA66W-BK 111-15460
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC10-14-PA66HS/PA66HIRHS-BK 156-02004
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC10-14-PA66HS/PA66HIRHS-BK 156-02004
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-02002
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-02002
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-02001
Compare
Add to watchlist
500 pcs.
Black (BK) T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-02001
Fixing tie with pipe/tube holder, ⌀50.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀50.0mm, black, 500pcs.
T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-01365
Compare
Add to watchlist
500 pcs.
Black (BK) T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-01365
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
Compare
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
MB4APT-A-PA66-BK 151-02245
Compare
Add to watchlist
100 pcs.
Black (BK) MB4APT-A-PA66-BK 151-02245
Bundling clip for hole (round), L=55.0mm, SO=20.0mm, black, 500pcs.
Standoff bundling clip securely attaches to surfaces via fir tree.
Compare
Bundling clip for hole (round), L=55.0mm, SO=20.0mm, black, 500pcs.
SOC4MFT6-PA66HIRHS-BK 155-30902
Compare
Add to watchlist
500 pcs.
Black (BK) SOC4MFT6-PA66HIRHS-BK 155-30902
Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, black, 50pcs.
Kabelrap tie offers a smooth strap providing secure assembly without damaging cables or hoses.
Compare
Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, black, 50pcs.
KR6/35-PA66UV-BK 121-63560
Compare
Add to watchlist
50 pcs.
Black (BK) KR6/35-PA66UV-BK 121-63560
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, natural, 50pcs.
Compare
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, natural, 50pcs.
KR8/33-PA66HS-NA 121-83355
Compare
Add to watchlist
50 pcs.
Natural (NA) KR8/33-PA66HS-NA 121-83355
Cable tie mount for stud, Wmax=8.5mm, ⌀5.0 mm, black, 500pcs.
Fixing element for cable ties and stud fixation (5 mm).
Compare
Cable tie mount for stud, Wmax=8.5mm, ⌀5.0 mm, black, 500pcs.
SBH1-PA66-BK 151-02260
Compare
Add to watchlist
500 pcs.
Black (BK) SBH1-PA66-BK 151-02260
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC14-PA66HIRHS-BK 151-01145
Compare
Add to watchlist
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-01145
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Compare
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC15-PA66HIRHS-BK 151-01146
Compare
Add to watchlist
500 pcs.
Black (BK) EC15-PA66HIRHS-BK 151-01146
Bundling clip for edge, L=39.0mm, black, 500pcs.
Bundling Clip for edges 1.5 - 4 mm. Designed for our Autotools.
Compare
Bundling clip for edge, L=39.0mm, black, 500pcs.
ATSBCEC38-PA66HSW-BK 102-68385
Compare
Add to watchlist
500 pcs.
Black (BK) ATSBCEC38-PA66HSW-BK 102-68385
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, brown, 500pcs.
Compare
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, brown, 500pcs.
COW20DP7-PA66HS-BN 151-01097
Compare
Add to watchlist
500 pcs.
Brown (BN) COW20DP7-PA66HS-BN 151-01097
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, black, 500pcs.
COW Clip with Cable Tie Assembly
Compare
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, black, 500pcs.
COW20DP7-PA66HS-BK 151-01098
Compare
Add to watchlist
500 pcs.
Black (BK) COW20DP7-PA66HS-BK 151-01098
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, brown, 500pcs.
Compare
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, brown, 500pcs.
COW20DP7-PA66-BN 151-01095
Compare
Add to watchlist
500 pcs.
Brown (BN) COW20DP7-PA66-BN 151-01095
Bundling clip for hole (round), black, 1000pcs.
Compare
Bundling clip for hole (round), black, 1000pcs.
TC30FT6LG-PA66-BK 151-00884
Compare
Add to watchlist
1000 pcs.
Black (BK) TC30FT6LG-PA66-BK 151-00884
Bundling clip for hole (round), L=35.5mm, SO=15.75mm, natural, 5000pcs.
Clip can be installed by hand – no need for hardware or tools.
Compare
Bundling clip for hole (round), L=35.5mm, SO=15.75mm, natural, 5000pcs.
SOC9FT6XLG-PA66HIRHS-NA 151-01154
Compare
Add to watchlist
5000 pcs.
Natural (NA) SOC9FT6XLG-PA66HIRHS-NA 151-01154
Fixing tie for hole (round), inside serrated, black, 3000Set
Compare
Fixing tie for hole (round), inside serrated, black, 3000Set
T50RFT9SET-PA66HS/PA66HIRHS-BK 156-00159
Compare
Add to watchlist
3000 Set
Black (BK) T50RFT9SET-PA66HS/PA66HIRHS-BK 156-00159
Fixing tie for edge, inside serrated, ⌀1.0-20.0mm, black, 500Set
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
Fixing tie for edge, inside serrated, ⌀1.0-20.0mm, black, 500Set
T18REC10SDSET-PA66HS/PA66HIRHS-BK 156-00962
Compare
Add to watchlist
500 Set
Black (BK) T18REC10SDSET-PA66HS/PA66HIRHS-BK 156-00962
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Compare
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Halter SFT6.5-PA66HIRHS-BK 133-00067
Compare
Add to watchlist
1000 pcs.
Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067
Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Bundling clip for hole (oval), L=50.0mm, SO=20.0mm, natural, 3000pcs.
SOC11FTOVAL-PA66HIRHS-NA 151-00932
Compare
Add to watchlist
3000 pcs.
Natural (NA) SOC11FTOVAL-PA66HIRHS-NA 151-00932
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black
Compare
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black
T50SMVCOC10-14-PA66HS/PA66HIRHS-BK 156-02003
Compare
Add to watchlist
Black (BK) T50SMVCOC10-14-PA66HS/PA66HIRHS-BK 156-02003
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, grey, 500pcs.
T50SMVCOC10-14
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, grey, 500pcs.
T50SMVCOC10-14-PA46-GY 156-02610
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SMVCOC10-14-PA46-GY 156-02610
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Compare
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA46-NA 111-00525
Compare
Add to watchlist
100 pcs.
Natural (NA) T50R-PA46-NA 111-00525
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Compare
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSBS5-PA66HS-BK 150-21299
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSSBS5-PA66HS-BK 150-21299
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.
T50SVCOC10-14-PA46-GY 156-01045
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SVCOC10-14-PA46-GY 156-01045
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-02005
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-02005
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVC6.5-PA66HS/PA66HIRHS-BK 156-02006
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC6.5-PA66HS/PA66HIRHS-BK 156-02006
Fixing tie with pipe/tube holder, inside serrated, ⌀35.0mm, grey, 500pcs.
T50SVC5 rotates in any direction.
Compare
Fixing tie with pipe/tube holder, inside serrated, ⌀35.0mm, grey, 500pcs.
T50SVC6.5-PA46-GY 156-00937
Compare
Add to watchlist
500 pcs.
Grey (GY) T50SVC6.5-PA46-GY 156-00937
Fixing tie with pipe/tube holder, ⌀2-35mm, black, 250pcs.
T50SMVCOC19-24,5 rotates in any direction.
Compare
Fixing tie with pipe/tube holder, ⌀2-35mm, black, 250pcs.
T50SVCOC25-31-PA66HS/PA66HIRHS-BK 156-01230
Compare
Add to watchlist
250 pcs.
Black (BK) T50SVCOC25-31-PA66HS/PA66HIRHS-BK 156-01230
Fixing tie with pipe/tube holder, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCTCL14B, simple and safe guidance of corrugated tubes, cable tie enables parallel guidance.
Compare
Fixing tie with pipe/tube holder, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCTCL14A-PA66HS/PA66HIRHS-BK 156-03353
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSCTCL14A-PA66HS/PA66HIRHS-BK 156-03353
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100mm, black, 250pcs.
Chassis-Fixing-Ties BHT375 for restricted space areas
Compare
Cable tie outside serrated for direct fixation, 375x7.6mm, ⌀100mm, black, 250pcs.
BHT375-PA66HS-BK 150-37595
Compare
Add to watchlist
250 pcs.
Black (BK) BHT375-PA66HS-BK 150-37595
Fixing tie for hole (round), outside serrated, ⌀1.6-32.0mm, black, 1500pcs.
Fixing tie with fir tree for round holes and with disc.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.6-32.0mm, black, 1500pcs.
T50SOSFT6E-PA66HIRHS-BK 155-05800
Compare
Add to watchlist
1500 pcs.
Black (BK) T50SOSFT6E-PA66HIRHS-BK 155-05800
Fixing tie with pipe/tube holder, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, black, 500pcs.
T50SOSFT7EOC1A-PA66HS/PA66HIRHS-BK 156-01273
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSFT7EOC1A-PA66HS/PA66HIRHS-BK 156-01273
Fixing tie with pipe/tube holder, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, black, 500pcs.
T60SOSSFT712S-E1OC1A-PA66HS/PA66HIRHS-BK 156-01684
Compare
Add to watchlist
500 pcs.
Black (BK) T60SOSSFT712S-E1OC1A-PA66HS/PA66HIRHS-BK 156-01684
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 500pcs.
T50ROSFT13SET
Compare
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 500pcs.
T50ROSFT13SET-PA66HS/PA66HIRHS-BK 156-01471
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSFT13SET-PA66HS/PA66HIRHS-BK 156-01471
Cable clip for stud, ⌀5.0 mm/6.0 mm, Dmin=10.0mm, Dmax=15.0mm, nom⌀=12.0 mm, nom⌀2=12.0 mm, ⌀5.0 mm/6.0 mm
Compare
Cable clip for stud, ⌀5.0 mm/6.0 mm, Dmin=10.0mm, Dmax=15.0mm, nom⌀=12.0 mm, nom⌀2=12.0 mm, ⌀5.0 mm/6.0 mm
SMF2LOC10-14X2-PA66HIRHSUV-BK 156-02843
Compare
Add to watchlist
1000 pcs.
Black (BK) SMF2LOC10-14X2-PA66HIRHSUV-BK 156-02843
Bundling clip for hole (round), L=50.0mm, SO=32.0mm, black, 1500pcs.
Standoff bundling clips provide a straightforward way to secure cable bundles, hoses or pipes.
Compare
Bundling clip for hole (round), L=50.0mm, SO=32.0mm, black, 1500pcs.
SOC12FTOVAL-PA66HIRHSUV-BK 151-01117
Compare
Add to watchlist
1500 pcs.
Black (BK) SOC12FTOVAL-PA66HIRHSUV-BK 151-01117
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
SolidTack Family with special adhesive.
Compare
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
MB3APT-A-PA66-BK 151-02244
Compare
Add to watchlist
100 pcs.
Black (BK) MB3APT-A-PA66-BK 151-02244
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
T18R-PA66HS-NA 111-01959
Compare
Add to watchlist
100 pcs.
Natural (NA) T18R-PA66HS-NA 111-01959
Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.
Compare
Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.
LK5-PA66W-BK 111-60560
Compare
Add to watchlist
50 pcs.
Black (BK) LK5-PA66W-BK 111-60560
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC10-14-PA66/PA66HIRHS-BK 156-01032
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVCOC10-14-PA66/PA66HIRHS-BK 156-01032
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVC6.5-PA66HS/PA66HIRHS-BK 156-01158
Compare
Add to watchlist
500 pcs.
Black (BK) T50SVC6.5-PA66HS/PA66HIRHS-BK 156-01158
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
T50SVC3.5-PA66HS/PA66HIRHS-BK 156-01350
Compare
Add to watchlist
1000
Black (BK) T50SVC3.5-PA66HS/PA66HIRHS-BK 156-01350
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.
H8P-PA66-NA 211-60089
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H8P-PA66-NA 211-60089
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.
H9P-PA66-NA 211-60099
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) H9P-PA66-NA 211-60099
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
Oval fir tree firmly secures clip to mounting surface.
Compare
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Compare
Add to watchlist
1000 pcs.
Black (BK) WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 250pcs.
Compare
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 250pcs.
T50SMVCOC28-PA66HS/PA66HIRHS-BK 156-01268
Compare
Add to watchlist
250 pcs.
Black (BK) T50SMVCOC28-PA66HS/PA66HIRHS-BK 156-01268
Fixing tie with pipe/tube holder, ⌀1.5-50.0mm, black, 500pcs.
Compare
Fixing tie with pipe/tube holder, ⌀1.5-50.0mm, black, 500pcs.
T50ROC10-17A-PA66HS/PA66HIRHS-BK 156-02903
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROC10-17A-PA66HS/PA66HIRHS-BK 156-02903
Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 5000pcs.
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Compare
Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 5000pcs.
T30RATSEC37SET-PA66HS/PA66HIRHS-BK 156-00112
Compare
Add to watchlist
5000 pcs.
Black (BK) T30RATSEC37SET-PA66HS/PA66HIRHS-BK 156-00112
Cable tie outside serrated, 145.0x3.4mm, ⌀1.6-35.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Compare
Cable tie outside serrated, 145.0x3.4mm, ⌀1.6-35.0mm, black, 100pcs.
T30ROS-PA66HS-BK 118-04800
Compare
Add to watchlist
100 pcs.
Black (BK) T30ROS-PA66HS-BK 118-04800

Results for "cable scout" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 16/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Update: 16/08/2025 | Privacy Settings
Contact