Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
19/12/2025

Results for "Wiring Ducts and Accessories"

1,511 products found 5 further hits
Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (477)

Cable Ties Inside Serrated  (104) Cable Ties Outside Serrated  (8) Cable Ties Without Serration  (13) Cable Ties, Releasable  (20) Cable Ties, Stainless Steel  (46) Cable Ties With Fixing Elements  (64) Cable Tie Mounts  (73) Fixing Elements  (23) Clips, Clamps and Plugs  (143)
Cable Ties and Fixings
Cable Ties and Fixings (477)
Insulation

Insulation  (330)

Heat Shrink Tubing  (318) Heat Shrinkable Moulded Shapes  (14) Insulating tubes  (1)
Insulation
Insulation (330)
Cable Protection Systems

Cable Protection Systems  (61)

Protective Tubing and Spiral Binding  (22) Expandable Braided Sleeves  (21) Open Woven Sleeves  (10) Cable Glands  (8)
Cable Protection Systems
Cable Protection Systems (61)
Electrical Installation

Electrical Installation  (526)

Electrical Tapes  (9) Cast Resin Technology  (12) Gel Technology  (5) Pre-insulated Terminals  (196) Chemicals  (1) Lugs and Links  (300) Dispenser Tools  (3)
Electrical Installation
Electrical Installation (526)
Identification Systems

Identification Systems  (76)

Wire and Cable Markers  (46) Control Panel Labelling  (30) RFID tags and cable ties  (16) Hazardous Area Identification  (4) Printers and Software  (10)
Identification Systems
Identification Systems (76)
Application Tooling

Application Tooling  (42)

Application Tooling for Cable Ties  (15) Application Tooling for Braided Sleeves  (1) Electrical Tooling  (26)
Application Tooling
Application Tooling (42)
1,511 products
Reset all
Cable clip for hole (round), ⌀4.7 mm, Dmin=5.0mm, Dmax=5.0mm
Compare
Cable clip for hole (round), ⌀4.7 mm, Dmin=5.0mm, Dmax=5.0mm
WPC5-PA66-NA 151-75059
Compare
Add to watchlist
100 pcs.
Natural (NA) WPC5-PA66-NA 151-75059
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 500pcs.
CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Compare
Add to watchlist
500 pcs.
Black (BK) CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Corrugated tube clip for hole (round), nom⌀7.5mm, black, 500pcs.
Compare
Corrugated tube clip for hole (round), nom⌀7.5mm, black, 500pcs.
CTC7.5FT6LG-PA66HIRHS-BK 151-14313
Compare
Add to watchlist
500 pcs.
Black (BK) CTC7.5FT6LG-PA66HIRHS-BK 151-14313
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
Clip includes an internal rib that spans the inside of the bracket to fit securely into the profile of the tubing to prevent lateral movement and slipping of the tubing.
Compare
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
CTC10FT6LG-PA66HIRHS-BK 151-00018
Compare
Add to watchlist
500 pcs.
Black (BK) CTC10FT6LG-PA66HIRHS-BK 151-00018
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
CTC13FT6LG-PA66HIRHS-BK 151-00019
Compare
Add to watchlist
500 pcs.
Black (BK) CTC13FT6LG-PA66HIRHS-BK 151-00019
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.
H10P-PA66HS-BK 211-60009
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H10P-PA66HS-BK 211-60009
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
SAM83-PA66HIRHS-GY 151-29600
Compare
Add to watchlist
500 pcs.
Grey (GY) SAM83-PA66HIRHS-GY 151-29600
Cable tie inside serrated, 300.0x7.6mm, ⌀5-80mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 300.0x7.6mm, ⌀5-80mm, natural, 100pcs.
T120I-PA66-NA 111-12119
Compare
Add to watchlist
100 pcs.
Natural (NA) T120I-PA66-NA 111-12119
Cable tie mount for adhesive use, Wmax=8.9mm, ⌀4.8 mm, #8 Screw, white, 100pcs.
4-way cable tie entry for more bundling options.
Compare
Cable tie mount for adhesive use, Wmax=8.9mm, ⌀4.8 mm, #8 Screw, white, 100pcs.
MB5A-PA66-WH 151-28529
Compare
Add to watchlist
100 pcs.
White (WH) MB5A-PA66-WH 151-28529
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀4.5 mm, natural, 1000pcs.
Screw fixing mount TY3F1.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀4.5 mm, natural, 1000pcs.
TY8F1-PA66-NA 151-02157
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) TY8F1-PA66-NA 151-02157
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Terminal crimp tool for single grip, manual, 0.564kg, red/black
HTYY1 Pre-insulated single grip terminal crimper.
Compare
Terminal crimp tool for single grip, manual, 0.564kg, red/black
HYYT1-MET/PL-BK/RD 924-00315
Compare
Add to watchlist
1 pc.
Red (RD), Black (BK) HYYT1-MET/PL-BK/RD 924-00315
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
H1P-PA66HS-BK 211-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H1P-PA66HS-BK 211-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.
H9P-PA66HS-BK 211-60008
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H9P-PA66HS-BK 211-60008
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie tool for 2.5 - 4.8mm, manual, 0.05kg, blue
Manual tensioning tool MK20.
Compare
Cable tie tool for 2.5 - 4.8mm, manual, 0.05kg, blue
MK20-PL-BU 110-20006
Compare
Add to watchlist
1 pcs.
Blue (BU) MK20-PL-BU 110-20006
Cable tie inside serrated, 388.0x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 388.0x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R-PA66W-BK 111-00944
Compare
Add to watchlist
100 pcs.
Black (BK) T120R-PA66W-BK 111-00944
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 1000pcs.
T18R-PA66W-BK 111-01867
Compare
Add to watchlist
1000 pcs.
Black (BK) T18R-PA66W-BK 111-01867
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 100pcs.
T50L-PA66W-BK 111-05710
Compare
Add to watchlist
100 pcs.
Black (BK) T50L-PA66W-BK 111-05710
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, black, 1000pcs.
T50L-PA66W-BK 111-01610
Compare
Add to watchlist
1000 pcs.
Black (BK) T50L-PA66W-BK 111-01610
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66W-BK 111-04860
Compare
Add to watchlist
100 bag
Black (BK) T50R-PA66W-BK 111-04860
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 1000pcs.
T50R-PA66W-BK 111-00984
Compare
Add to watchlist
1000 pcs.
Black (BK) T50R-PA66W-BK 111-00984
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
Simple to install with a screw or rivet.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
MB2-PA66-BK 151-28210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) MB2-PA66-BK 151-28210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, black, 100pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles. 
Compare
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, black, 100pcs.
T30MR-PA66-BK 113-03010
Compare
Add to watchlist
100 pcs.
Black (BK) T30MR-PA66-BK 113-03010
Cast resin joint, Straight-through i, 4 x 25mm² to 4 x 95mm², L=400mm, 1140 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 4 x 25mm² to 4 x 95mm², L=400mm, 1140 ml, Polyurethane resin (PUR) green
i-4 / SF-PUR-GN 435-00084
Compare
Add to watchlist
1 Pack
Green (GN) i-4 / SF-PUR-GN 435-00084
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
T120M-PA66-NA 111-12619
Compare
Add to watchlist
100 pcs.
Natural (NA) T120M-PA66-NA 111-12619
Cable tie inside serrated, 387.0x7.4mm, ⌀15.0-105.0mm, blue, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 387.0x7.4mm, ⌀15.0-105.0mm, blue, 50pcs.
T120R-E/TFE-BU 111-01125
Compare
Add to watchlist
50 pcs.
Blue (BU) T120R-E/TFE-BU 111-01125
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, natural, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, natural, 25pcs.
T150M-PA66-NA 111-15619
Compare
Add to watchlist
25 pcs.
Natural (NA) T150M-PA66-NA 111-15619
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 1000pcs.
T18R-PA66-NA 111-01929
Compare
Add to watchlist
1000 pcs.
Natural (NA) T18R-PA66-NA 111-01929
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, natural, 100pcs.
T50S-PA66-NA 111-05819
Compare
Add to watchlist
100 pcs.
Natural (NA) T50S-PA66-NA 111-05819
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
T50S-PA66W-BK 111-05860
Compare
Add to watchlist
100 pcs.
Black (BK) T50S-PA66W-BK 111-05860
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
4-way cable tie entry for more installation options.
Compare
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
MB3A-PA66-WH 151-28349
Compare
Add to watchlist
100 pcs.
White (WH) MB3A-PA66-WH 151-28349
Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.
TY8G1 TY8G1S Black Screw Fixing Cable Tie Mount
Compare
Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.
TY8G1S-PA66W-BK 151-11810
Compare
Add to watchlist
100 pcs.
Black (BK) TY8G1S-PA66W-BK 151-11810
Cable tie tool for 3.6 - 9.0mm, manual, 0.32kg, white
TG009 Manual tensioning tool for nylon cable ties.
Compare
Cable tie tool for 3.6 - 9.0mm, manual, 0.32kg, white
TG009-ST-WH 924-00000
Compare
Add to watchlist
1 pc.
White (WH) TG009-ST-WH 924-00000
Cable tie tool for 4.5 - 7.9mm, manual, 0.554kg, grey
HT338 Manual tensioning tool for stainless steel cable ties.
Compare
Cable tie tool for 4.5 - 7.9mm, manual, 0.554kg, grey
HT338-ST-GY 924-00004
Compare
Add to watchlist
1 pc.
Grey (GY) HT338-ST-GY 924-00004
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip.
Compare
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, black, 100pcs.
LKCSF1-PA66W-BK 151-01683
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) LKCSF1-PA66W-BK 151-01683
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Compare
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC19-PA66HS/PA66HIRHS-BK 156-04602
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC19-PA66HS/PA66HIRHS-BK 156-04602
Cable tie tool for 2.5 - 4.8mm, manual, 0.236kg, blue
Manual tensioning tool EVO 7i.
Compare
Cable tie tool for 2.5 - 4.8mm, manual, 0.236kg, blue
EVO7i-MET/PL-BU 110-77001
Compare
Add to watchlist
1 pcs.
Blue (BU) EVO7i-MET/PL-BU 110-77001
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, natural, 100pcs.
T18I-PA66-NA 111-02319
Compare
Add to watchlist
100 pcs.
Natural (NA) T18I-PA66-NA 111-02319
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
T18I-PA66W-BK 111-02360
Compare
Add to watchlist
100 pcs.
Black (BK) T18I-PA66W-BK 111-02360
Cable tie inside serrated, 202.0x4.7mm, ⌀5.0-50.0mm, blue, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Compare
Cable tie inside serrated, 202.0x4.7mm, ⌀5.0-50.0mm, blue, 100pcs.
T50R-E/TFE-BU 111-00732
Compare
Add to watchlist
100 pcs.
Blue (BU) T50R-E/TFE-BU 111-00732
Cable tie inside serrated, 205.0x4.7mm, ⌀1.5-55.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 205.0x4.7mm, ⌀1.5-55.0mm, natural, 100pcs.
T80R-PA66HS-NA 111-05059
Compare
Add to watchlist
100 pcs.
Natural (NA) T80R-PA66HS-NA 111-05059
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.
Cable Tie Mounts MB and TY.
Compare
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.
MB4A-PA66-WH 151-28469
Compare
Add to watchlist
100 pcs.
White (WH) MB4A-PA66-WH 151-28469
Identification cable tie tamper-evident, 390.0x56.0mm, ⌀19.0-100.0mm, natural, 100pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie tamper-evident, 390.0x56.0mm, ⌀19.0-100.0mm, natural, 100pcs.
IT50L-PA66-NA 111-85319
Compare
Add to watchlist
100 pcs.
Natural (NA) IT50L-PA66-NA 111-85319
Identification cable tie tamper-evident, 203.2x46.0mm, ⌀10.0-44.0mm, natural, 50pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie tamper-evident, 203.2x46.0mm, ⌀10.0-44.0mm, natural, 50pcs.
IT50RT-PA66-NA 111-85119
Compare
Add to watchlist
50 pcs.
Natural (NA) IT50RT-PA66-NA 111-85119
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 300.0x7.6mm, ⌀5-80mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 300.0x7.6mm, ⌀5-80mm, black, 100pcs.
T120I-PA66W-BK 111-12160
Compare
Add to watchlist
100 pcs.
Black (BK) T120I-PA66W-BK 111-12160
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 1000pcs.
T30R-PA66W-BK 111-03280
Compare
Add to watchlist
1000 pcs.
Black (BK) T30R-PA66W-BK 111-03280
Fixing tie for hole (round), inside serrated, ⌀5.0-44.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-44.0mm, black, 500pcs.
T50RFT8-PA66HS-BK 156-00158
Compare
Add to watchlist
500 pcs.
Black (BK) T50RFT8-PA66HS-BK 156-00158
Cable tie mount for screw fixation, Wmax=2.6mm, ⌀2.9 mm, M3 Screw, natural, 100pcs.
Screw fixing mount MB1.
Compare
Cable tie mount for screw fixation, Wmax=2.6mm, ⌀2.9 mm, M3 Screw, natural, 100pcs.
MB1-PA66-NA 151-28119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) MB1-PA66-NA 151-28119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
Simple to install with a screw or rivet.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
White (WH) MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Stainless steel cable tie, ball bearing lock, 1524x12.3mm, ⌀17-230mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 1524x12.3mm, ⌀17-230mm, metal, 25pcs.
MBT60XHD-SS316L-ML 111-01311
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT60XHD-SS316L-ML 111-01311
Stainless steel cable tie, ball bearing lock, 1245x16.0mm, ⌀25-180mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 1245x16.0mm, ⌀25-180mm, metal, 25pcs.
MBT49UHD-SS316L-ML 111-01315
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT49UHD-SS316L-ML 111-01315
Cable tie mount for hole (round), Wmax=9.0mm, ⌀6.0 mm, black, 100pcs.
LOK01, LOK01B, LOK01S fixing bases.
Compare
Cable tie mount for hole (round), Wmax=9.0mm, ⌀6.0 mm, black, 100pcs.
LOK01B-PA6HIR-BK 151-80500
Compare
Add to watchlist
100 pcs.
Black (BK) LOK01B-PA6HIR-BK 151-80500
Cable tie mount for screw fixation, Wmax=9.0mm, ⌀5.1 mm, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=9.0mm, ⌀5.1 mm, black, 100pcs.
LOK02-PA66W-BK 151-80210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) LOK02-PA66W-BK 151-80210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Identification cable tie tamper-evident, 100.0x25.0mm, ⌀6.00-22.00mm, natural, 100pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie tamper-evident, 100.0x25.0mm, ⌀6.00-22.00mm, natural, 100pcs.
IT18R-PA66-NA 111-81821
Compare
Add to watchlist
100 pcs.
Natural (NA) IT18R-PA66-NA 111-81821
Identification cable tie tamper-evident, 203.2x28.0mm, ⌀9.5-44.5mm, natural, 100pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie tamper-evident, 203.2x28.0mm, ⌀9.5-44.5mm, natural, 100pcs.
IT50R-PA66-NA 111-85019
Compare
Add to watchlist
100 pcs.
Natural (NA) IT50R-PA66-NA 111-85019
Identification cable tie tamper-evident, 203.2x29.0mm, ⌀10.0-44.0mm, natural, 50pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie tamper-evident, 203.2x29.0mm, ⌀10.0-44.0mm, natural, 50pcs.
IT50RD-PA66-NA 111-85219
Compare
Add to watchlist
50 pcs.
Natural (NA) IT50RD-PA66-NA 111-85219
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀5.0-102.0mm, black, 50pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-102.0mm, black, 50pcs.
T120MR-PA66-BK 113-12020
Compare
Add to watchlist
50 pcs.
Black (BK) T120MR-PA66-BK 113-12020
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 100pcs.
90-degree metal edge clip
Compare
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 100pcs.
MSC90-SS304-ML 151-02189
Compare
Add to watchlist
100 pcs.
Metal (ML) MSC90-SS304-ML 151-02189
Stainless steel cable tie, ball bearing lock, 681x12.3mm, ⌀17-100mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 681x12.3mm, ⌀17-100mm, metal, 50pcs.
MBT27XHD-SS316L-ML 111-01307
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT27XHD-SS316L-ML 111-01307
Stainless steel cable tie, ball bearing lock, 838x12.3mm, ⌀17-120mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 838x12.3mm, ⌀17-120mm, metal, 50pcs.
MBT33XHD-SS316L-ML 111-01308
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33XHD-SS316L-ML 111-01308
Stainless steel cable tie, ball bearing lock, 1092x12.3mm, ⌀17-160mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 1092x12.3mm, ⌀17-160mm, metal, 25pcs.
MBT43XHD-SS316L-ML 111-01309
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT43XHD-SS316L-ML 111-01309
Stainless steel cable tie, ball bearing lock, 681x16.0mm, ⌀25-100mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 681x16.0mm, ⌀25-100mm, metal, 50pcs.
MBT27UHD-SS316L-ML 111-01312
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT27UHD-SS316L-ML 111-01312
Stainless steel cable tie, ball bearing lock, 838x16.0mm, ⌀25-120mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 838x16.0mm, ⌀25-120mm, metal, 50pcs.
MBT33UHD-SS316L-ML 111-01313
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT33UHD-SS316L-ML 111-01313
Stainless steel cable tie, ball bearing lock, 1092x16.0mm, ⌀25-160mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 1092x16.0mm, ⌀25-160mm, metal, 25pcs.
MBT43UHD-SS316L-ML 111-01314
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT43UHD-SS316L-ML 111-01314
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1 TY3G1S Natural Screw Fixing Cable Tie Mount
Compare
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1S-PA66-NA 151-11319
Compare
Add to watchlist
100 pcs.
Natural (NA) TY3G1S-PA66-NA 151-11319
Identification cable tie tamper-evident, 110.0x20.5mm, ⌀1.5-19.0mm, natural, 100pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie tamper-evident, 110.0x20.5mm, ⌀1.5-19.0mm, natural, 100pcs.
IT18FL-PA66-NA 111-81919
Compare
Add to watchlist
100 pcs.
Natural (NA) IT18FL-PA66-NA 111-81919
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀1.5-35.0mm, blue, 100pcs.
MCT Series cable ties are metal detectable, to minimize the risk of foreign object contamination.
Compare
Cable tie inside serrated detectable, 150.0x3.5mm, ⌀1.5-35.0mm, blue, 100pcs.
MCT30R-PA66MD-BU 111-00829
Compare
Add to watchlist
100 pcs.
Blue (BU) MCT30R-PA66MD-BU 111-00829
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀3.0-100.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 387.0x7.6mm, ⌀3.0-100.0mm, blue, 100pcs.
MCT120R-PA66MD-BU 111-01136
Compare
Add to watchlist
100 pcs.
Blue (BU) MCT120R-PA66MD-BU 111-01136
Cable tie inside serrated detectable, 100.0x2.5mm, ⌀1.5-22.0mm, blue, 100pcs.
Compare
Cable tie inside serrated detectable, 100.0x2.5mm, ⌀1.5-22.0mm, blue, 100pcs.
MCT18R-PA66MD-BU 111-01225
Compare
Add to watchlist
100 pcs.
Blue (BU) MCT18R-PA66MD-BU 111-01225
Fixing tie for hole (oval), outside serrated, ⌀1.5-35.0mm, black, 1500pcs.
This 1-piece fixing tie with fir tree design for oval holes features anti-twist protection.
Compare
Fixing tie for hole (oval), outside serrated, ⌀1.5-35.0mm, black, 1500pcs.
T50SOS3DOP65X130-E-PA66HS-BK 157-00016
Compare
Add to watchlist
1500 pcs.
Black (BK) T50SOS3DOP65X130-E-PA66HS-BK 157-00016
Fixing tie for hole (oval), outside serrated, ⌀1.8-50.0mm, black, 1000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Compare
Fixing tie for hole (oval), outside serrated, ⌀1.8-50.0mm, black, 1000pcs.
T50ROSFTOVALU-PA66HIRHS-BK 157-00391
Compare
Add to watchlist
1000 pcs.
Black (BK) T50ROSFTOVALU-PA66HIRHS-BK 157-00391
Fixing tie for hole (round), ⌀1.5-50.0mm, black, 100pcs.
Compare
Fixing tie for hole (round), ⌀1.5-50.0mm, black, 100pcs.
RT50RSF-PA66-BK 115-07010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RT50RSF-PA66-BK 115-07010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, black, 500pcs.
1-piece fixing tie with fir tree for a round hole.
Compare
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, black, 500pcs.
T50SOSFT6D10E-PA66HS-BK 157-00045
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSFT6D10E-PA66HS-BK 157-00045
Stainless steel cable tie, ball bearing lock, 1524x16.0mm, ⌀25-230mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 1524x16.0mm, ⌀25-230mm, metal, 25pcs.
MBT60UHD-SS316L-ML 111-01316
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT60UHD-SS316L-ML 111-01316
Bootlace ferrule crimp tool up to 0.5 - 16mm, manual, 0.600kg, red/black
HYAC10 Bootlace ferrule crimper.
Compare
Bootlace ferrule crimp tool up to 0.5 - 16mm, manual, 0.600kg, red/black
HYAC10-MET/PL-BK/RD 924-00319
Compare
Add to watchlist
1 pc.
Red (RD), Black (BK) HYAC10-MET/PL-BK/RD 924-00319
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, black, 100pcs.
T150R(H)-PA66W-BK 111-14860
Compare
Add to watchlist
100 pcs.
Black (BK) T150R(H)-PA66W-BK 111-14860
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, natural, 100pcs.
T18L-PA66-NA 111-02119
Compare
Add to watchlist
100 pcs.
Natural (NA) T18L-PA66-NA 111-02119
Cable tie inside serrated for multiple routing, 210.82x4.7mm, ⌀1.6-38.0mm, black, 100pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Cable tie inside serrated for multiple routing, 210.82x4.7mm, ⌀1.6-38.0mm, black, 100pcs.
T50RDH-PA66-BK 117-05004
Compare
Add to watchlist
100
Black (BK) T50RDH-PA66-BK 117-05004
Cable tie inside serrated for multiple routing, 398.0x7.6mm, ⌀4.6-100mm, black, 50pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Cable tie inside serrated for multiple routing, 398.0x7.6mm, ⌀4.6-100mm, black, 50pcs.
T120RDH-PA66-BK 117-05501
Compare
Add to watchlist
50 pcs.
Black (BK) T120RDH-PA66-BK 117-05501
Cable tie inside serrated for multiple routing, 160.0x4.7mm, ⌀2.0-31.0mm, black, 100pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Cable tie inside serrated for multiple routing, 160.0x4.7mm, ⌀2.0-31.0mm, black, 100pcs.
T50SDH-PA66-BK 117-00018
Compare
Add to watchlist
100
Black (BK) T50SDH-PA66-BK 117-00018
Stainless steel cable tie, ball bearing lock, 1245x12.3mm, ⌀17-180mm, metal, 25pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Stainless steel cable tie, ball bearing lock, 1245x12.3mm, ⌀17-180mm, metal, 25pcs.
MBT49XHD-SS316L-ML 111-01310
Compare
Add to watchlist
25 pcs.
Metal (ML) MBT49XHD-SS316L-ML 111-01310
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110mm, natural, 100pcs.
T50L-PA66HS-NA 111-05655
Compare
Add to watchlist
100 pcs.
Natural (NA) T50L-PA66HS-NA 111-05655
Fixing tie for screw fixation, outside serrated, ⌀105.0mm, black, 200pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Compare
Fixing tie for screw fixation, outside serrated, ⌀105.0mm, black, 200pcs.
T120ROSDHDM6-PA66HS/PA66W-BK 156-01485
Compare
Add to watchlist
50 pcs.
Black (BK) T120ROSDHDM6-PA66HS/PA66W-BK 156-01485
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 100pcs.
LKM-PA66-BK 151-26301
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) LKM-PA66-BK 151-26301
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Compare
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, black, 100pcs.
CTM0-PA66-BK 151-30300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) CTM0-PA66-BK 151-30300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, black, 100pcs.
CTM1-PA66-BK 151-30400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) CTM1-PA66-BK 151-30400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Facebook  Instagram  X  YouTube  LinkedIn  Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 13/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Update: 13/12/2025 | Privacy Settings
Contact