Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
21/08/2025

Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Моля обърнете внимание:  Търсената от вас комбинация от термини не връща съответстващи резултати.  По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

1 877 продукти
Нулиране на всички
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
SolidTack Family with special adhesive.
Сравнете
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
MB3APT-A-PA66-BK 151-02244
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MB3APT-A-PA66-BK 151-02244
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FlexTack FMB for round and angled surfaces
Сравнете
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FMB4APT-A-PA66HS-WH 151-02977
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) FMB4APT-A-PA66HS-WH 151-02977
Cable tie inside serrated detectable, 380.0x4.7mm, ⌀1.5-110.0mm, blue, 100pcs.
Сравнете
Cable tie inside serrated detectable, 380.0x4.7mm, ⌀1.5-110.0mm, blue, 100pcs.
MCT50L-PA66MD-BU 111-00831
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Blue (BU) MCT50L-PA66MD-BU 111-00831
Cable tie inside serrated detectable, 203.2x4.6mm, ⌀1.5-50.0mm, blue, 100pcs.
Сравнете
Cable tie inside serrated detectable, 203.2x4.6mm, ⌀1.5-50.0mm, blue, 100pcs.
MCT50R-PA66MD-BU 111-00830
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Blue (BU) MCT50R-PA66MD-BU 111-00830
Cable clip for hole (round)/with pipe/tube holder, ⌀6.1 - 6.9 mm, Dmin=15.0mm, Dmax=19.0mm
The locking clamps of the LOC-Series offer fast and easy bundling of convoluted tubes and pipes.
Сравнете
Cable clip for hole (round)/with pipe/tube holder, ⌀6.1 - 6.9 mm, Dmin=15.0mm, Dmax=19.0mm
LOC15-19FT6LGSO-PA66HIRHSUV-BK 151-01025
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) LOC15-19FT6LGSO-PA66HIRHSUV-BK 151-01025
Cable clip, T=4.5mm, ⌀7.0 mm, Dmax=20.0mm
Сравнете
Cable clip, T=4.5mm, ⌀7.0 mm, Dmax=20.0mm
HC1220FT7J-PA66HSUV-BK 151-00853
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HC1220FT7J-PA66HSUV-BK 151-00853
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Сравнете
Cable clip with pipe/tube holder
DTC18x5-S-PA66HIRHS-BK 156-01311
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x5-S-PA66HIRHS-BK 156-01311
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Сравнете
Cable clip with pipe/tube holder
DTC18x6.5-S-PA66HIRHS-BK 156-01312
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x6.5-S-PA66HIRHS-BK 156-01312
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Сравнете
Cable clip with pipe/tube holder
DTC18x9-11-S-PA66HIRHS-BK 156-01313
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x9-11-S-PA66HIRHS-BK 156-01313
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Сравнете
Cable clip with pipe/tube holder
DTC18x18-20-S-PA66HIRHS-BK 156-01314
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x18-20-S-PA66HIRHS-BK 156-01314
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Сравнете
Cable clip with pipe/tube holder
DTC18x28-S-PA66HIRHS-BK 156-01315
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DTC18x28-S-PA66HIRHS-BK 156-01315
Connector clip, black, 500pcs.
Сравнете
Connector clip, black, 500pcs.
CCSBS6-PA66HIRHS-BK 151-01698
Сравнете
Добавяне към списъка с наблюдавани
1500 pcs.
Black (BK) CCSBS6-PA66HIRHS-BK 151-01698
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Сравнете
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
T18MR-PA66-NA 113-01819
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) T18MR-PA66-NA 113-01819
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Сравнете
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Сравнете
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
Сравнете
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
280 pcs.
Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
Сравнете
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
Сравнете
Добавяне към списъка с наблюдавани
160 pcs.
Black (BK) RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Сравнете
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
160 pcs.
Black (BK) RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Сравнете
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
160 pcs.
Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Сравнете
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
160 pcs.
Black (BK) RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
Сравнете
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
T50R-PA46-GY 111-00824
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Grey (GY) T50R-PA46-GY 111-00824
Cable tie inside serrated for multiple routing, 305.0x4.7mm, ⌀1.6-76.2mm, black, 1000pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Сравнете
Cable tie inside serrated for multiple routing, 305.0x4.7mm, ⌀1.6-76.2mm, black, 1000pcs.
T50IDH-PA66HS-BK 117-05350
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50IDH-PA66HS-BK 117-05350
Stainless steel cable tie, ball bearing lock, 521.0x4.6mm, ⌀17.0-152.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 521.0x4.6mm, ⌀17.0-152.0mm, metal, 100pcs.
MBT20SS-SS304-ML 111-93208
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MBT20SS-SS304-ML 111-93208
Stainless steel cable tie, ball bearing lock, 201.0x7.9mm, ⌀17.0-50.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 201.0x7.9mm, ⌀17.0-50.0mm, metal, 50pcs.
MBT8HS-SS304-ML 111-94088
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Metal (ML) MBT8HS-SS304-ML 111-94088
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀12.0-102.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀12.0-102.0mm, metal, 50pcs.
MBT14H-SS316L-ML 111-94149
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Metal (ML) MBT14H-SS316L-ML 111-94149
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
MBT5S-SS316L-ML 111-93059
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MBT5S-SS316L-ML 111-93059
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.
Cable tie with very robust HDM-mount for screw applications.
Сравнете
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.
T120RHDM6-PA66HIRHS-BK 156-00406
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T120RHDM6-PA66HIRHS-BK 156-00406
Fixing tie for edge, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
2-piece fixing tie for edges 1-3 mm, side fixation.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
T50SOSEC5B-PA66HS/PA66HIRHS-BK 150-40583
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC5B-PA66HS/PA66HIRHS-BK 150-40583
Fixing tie for hole (round), outside serrated, ⌀5.0-25.4mm, black/blue, 250
Soft Grip Cable Tie assembled with Soft Grip Mount for holes (arrowhead).
Сравнете
Fixing tie for hole (round), outside serrated, ⌀5.0-25.4mm, black/blue, 250
SGT100SAHD6.5S2.0-PA66HS/TPE-BK/BU 156-04097
Сравнете
Добавяне към списъка с наблюдавани
250 pcs.
Black (BK), Blue (BU) SGT100SAHD6.5S2.0-PA66HS/TPE-BK/BU 156-04097
Fixing tie for stud, outside serrated, ⌀5.0-25.4mm, black/blue, 125
Soft Grip Cable Tie assembled with Soft Grip Mount for studs (weld stud).
Сравнете
Fixing tie for stud, outside serrated, ⌀5.0-25.4mm, black/blue, 125
SGT100SDSB5-6-PA66HS/TPE/PA66HIRHS-BK/BU 156-04098
Сравнете
Добавяне към списъка с наблюдавани
125 pcs.
Black (BK), Blue (BU) SGT100SDSB5-6-PA66HS/TPE/PA66HIRHS-BK/BU 156-04098
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FlexTack FMB for round and angled surfaces
Сравнете
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FMB4APT-A-PA66HS-BK 151-02219
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) FMB4APT-A-PA66HS-BK 151-02219
Cable clip, ⌀6.3 mm, Dmin=22.0mm, Dmax=24.0mm
PC clip with arrowhead.
Сравнете
Cable clip, ⌀6.3 mm, Dmin=22.0mm, Dmax=24.0mm
PC23-PA66-NA 151-14302
Сравнете
Добавяне към списъка с наблюдавани
200 pcs.
Natural (NA) PC23-PA66-NA 151-14302
Cable clip for hole (round), T=3.7 - 6.1mm, ⌀4.0 mm, Dmin=2.5mm, Dmax=8.0mm
WPC – Wire Push In Clip.
Сравнете
Cable clip for hole (round), T=3.7 - 6.1mm, ⌀4.0 mm, Dmin=2.5mm, Dmax=8.0mm
WS02-PA66-NA 151-00753
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) WS02-PA66-NA 151-00753
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7 for simple and secure installation of corrugated tubing.
Сравнете
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7-PA66HIRHSUV-BK 151-14303
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) PC15FT7-PA66HIRHSUV-BK 151-14303
Cable clip for hole (round), ⌀7.0 mm, Dmax=5.0mm
For quick and simple routing of tubes and harnesses.
Сравнете
Cable clip for hole (round), ⌀7.0 mm, Dmax=5.0mm
PC5DP7L-PA46-BK 151-14801
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) PC5DP7L-PA46-BK 151-14801
Cable clip for hole (round), ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm
The 360 degree enclosure ensures the entire bundle is secure when being routed by the LOC clip.
Сравнете
Cable clip for hole (round), ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm
LOC10-14FT6LG-PA46-GY 151-01219
Сравнете
Добавяне към списъка с наблюдавани
2000 pcs.
Grey (GY) LOC10-14FT6LG-PA46-GY 151-01219
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=4.0mm, Dmax=5.5mm, nom⌀=5.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Сравнете
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=4.0mm, Dmax=5.5mm, nom⌀=5.0 mm
MOC5FT6.5-PA66HIRHSUV-BK 151-02083
Сравнете
Добавяне към списъка с наблюдавани
5000
Black (BK) MOC5FT6.5-PA66HIRHSUV-BK 151-02083
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Сравнете
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Cable clip with pipe/tube holder/for hole (round), T=4.5mm, ⌀7.0 mm, Dmax=12mm
Сравнете
Cable clip with pipe/tube holder/for hole (round), T=4.5mm, ⌀7.0 mm, Dmax=12mm
HC512FT7J-PA66HSUV-BK 151-00852
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HC512FT7J-PA66HSUV-BK 151-00852
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use, ⌀3.3 mm
ASI Clip Self Adhesive / Screw Clip
Сравнете
Cable clip for adhesive use, ⌀3.3 mm
ASI-Clip-PA66HIR-NA 150-11294
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) ASI-Clip-PA66HIR-NA 150-11294
Cable clip, ⌀3.2 mm, Dmax=3.0mm
Fixing clip TY8H1(S) - screw fix or self adhesive.
Сравнете
Cable clip, ⌀3.2 mm, Dmax=3.0mm
TY8H1-PA66-NA 151-22819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY8H1-PA66-NA 151-22819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5
Arrowhead clip with TwistLock.
Сравнете
Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5
HTS9-PA66-BK 151-00725
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HTS9-PA66-BK 151-00725
Connector clip for hole (oval), black, 3000pcs.
Сравнете
Connector clip for hole (oval), black, 3000pcs.
CCDOP62x122-PA66HIRHS-BK 151-02431
Сравнете
Добавяне към списъка с наблюдавани
3000 pcs.
Black (BK) CCDOP62x122-PA66HIRHS-BK 151-02431
Connector clip, black, 500pcs.
Conector clip CCWA for wires.
Сравнете
Connector clip, black, 500pcs.
CCWA3.4-PA66HIRHS-BK 151-01876
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CCWA3.4-PA66HIRHS-BK 151-01876
Samples Paste Adhesive Mounts-PA66/6HIRHS/PA66HS/PA666V0-BK
Сравнете
Samples Paste Adhesive Mounts-PA66/6HIRHS/PA66HS/PA666V0-BK
Samples Paste Adhesive Mounts-PA66/6HIRHS/PA66HS/PA666V0-BK 905-50077
Сравнете
Добавяне към списъка с наблюдавани
1 pack
Black (BK) Samples Paste Adhesive Mounts-PA66/6HIRHS/PA66HS/PA666V0-BK 905-50077
Cable tie mount for hole (round), Wmax=6.5mm, ⌀6.4 mm, black, 2000pcs.
Securely fix and route cables and pipes with SFC3.
Сравнете
Cable tie mount for hole (round), Wmax=6.5mm, ⌀6.4 mm, black, 2000pcs.
SFC3-F-PA66UV-BK 151-00340
Сравнете
Добавяне към списъка с наблюдавани
2000 pcs.
Black (BK) SFC3-F-PA66UV-BK 151-00340
Cable tie mount for magnetic use, Wmax=2.7mm, black, 50pcs.
Сравнете
Cable tie mount for magnetic use, Wmax=2.7mm, black, 50pcs.
MAGMB2-PA66/NDFEBR5-BK 151-04461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50
Black (BK) MAGMB2-PA66/NDFEBR5-BK 151-04461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Сравнете
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA46-NA 111-00525
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) T50R-PA46-NA 111-00525
Cable tie inside serrated, 305x4.7mm, ⌀1.5-85mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 305x4.7mm, ⌀1.5-85mm, black, 100pcs.
T80I-PA66W-BK 111-08290
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T80I-PA66W-BK 111-08290
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀17.0-102.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀17.0-102.0mm, metal, 50pcs.
MBT14HS-SS304-ML 111-94148
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Metal (ML) MBT14HS-SS304-ML 111-94148
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
MBT5SS-SS304-ML 111-93058
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MBT5SS-SS304-ML 111-93058
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀12.0-102.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀12.0-102.0mm, metal, 100pcs.
MBT14S-SS316L-ML 111-93149
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MBT14S-SS316L-ML 111-93149
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀12.0-50.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀12.0-50.0mm, metal, 100pcs.
MBT8S-SS316L-ML 111-93089
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MBT8S-SS316L-ML 111-93089
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Сравнете
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSBS5-PA66HS-BK 150-21299
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSSBS5-PA66HS-BK 150-21299
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Сравнете
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50REC4A-PA66HS/PA6HIRHS-BK 156-02424
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50REC4A-PA66HS/PA6HIRHS-BK 156-02424
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, grey, 500pcs.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, grey, 500pcs.
T50ROSEC4B-PA46-GY 156-00782
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50ROSEC4B-PA46-GY 156-00782
Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.
Сравнете
Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.
T50REC9-PA66HS/PA66HIRHS-BK 156-01280
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50REC9-PA66HS/PA66HIRHS-BK 156-01280
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC21-PA66HS/PA66HIRHS-BK 156-00017
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC21-PA66HS/PA66HIRHS-BK 156-00017
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Two-piece cable tie with edge clip assembly.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC19-PA66HS/PA66HIRHS-BK 156-04601
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC19-PA66HS/PA66HIRHS-BK 156-04601
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC20-PA66HS/PA66HIRHS-BK 156-00016
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC20-PA66HS/PA66HIRHS-BK 156-00016
Releasable cable tie, 150x4.7mm, ⌀5-36mm, 135N, green, 100pcs.
Сравнете
Releasable cable tie, 150x4.7mm, ⌀5-36mm, 135N, green, 100pcs.
ORF150-S-PA66W-GN 115-00173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Green (GN) ORF150-S-PA66W-GN 115-00173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
Сравнете
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
AHC3DH-PA66HIRHS-BK 151-00181
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) AHC3DH-PA66HIRHS-BK 151-00181
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19mm, Dmax=28mm
Сравнете
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19mm, Dmax=28mm
AHC3CH2-PA66HIRHS-BK 151-00937
Сравнете
Добавяне към списъка с наблюдавани
450 pcs.
Black (BK) AHC3CH2-PA66HIRHS-BK 151-00937
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=32.0mm, Dmax=37.5mm
Сравнете
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=32.0mm, Dmax=37.5mm
AHC45BHG2-PA46-GY 151-01377
Сравнете
Добавяне към списъка с наблюдавани
700 pcs.
Grey (GY) AHC45BHG2-PA46-GY 151-01377
Cable clip for hole (round), ⌀6.3 mm, Dmin=12.5mm, Dmax=13.5mm
Clips can be connected to offer a greater choice of installation options.
Сравнете
Cable clip for hole (round), ⌀6.3 mm, Dmin=12.5mm, Dmax=13.5mm
IPC13AH-PA66-BK 151-14130
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) IPC13AH-PA66-BK 151-14130
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.8mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm
The 360 degree enclosure ensures the entire bundle is secure when being routed by the LOC clip.
Сравнете
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.8mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm
LOC15-19FTOVAL-PA46-GY 151-02928
Сравнете
Добавяне към списъка с наблюдавани
1000 Carton
Grey (GY) LOC15-19FTOVAL-PA46-GY 151-02928
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12 locking clamp.
Сравнете
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12-PA66HIRHSUV-BK 151-02501
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02501
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 100pcs.
90-degree metal edge clip
Сравнете
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 100pcs.
MSC90-SS304-ML 151-02189
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MSC90-SS304-ML 151-02189
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 5000pcs.
90-degree metal edge clip
Сравнете
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 5000pcs.
MSC90-SS304-ML 151-02291
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Metal (ML) MSC90-SS304-ML 151-02291
Metal cable clip for edge, ⌀4.1-7.39mm, T=0.76 - 1.24mm, metal, 100pcs.
90-degree metal edge clip
Сравнете
Metal cable clip for edge, ⌀4.1-7.39mm, T=0.76 - 1.24mm, metal, 100pcs.
MSC901-SS304-ML 151-02569
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MSC901-SS304-ML 151-02569
Metal cable clip for edge, ⌀4.1-7.39mm, T=0.76 - 1.24mm, metal, 5000pcs.
90-degree metal edge clip
Сравнете
Metal cable clip for edge, ⌀4.1-7.39mm, T=0.76 - 1.24mm, metal, 5000pcs.
MSC901-SS304-ML 151-02570
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Metal (ML) MSC901-SS304-ML 151-02570
Cable clip for adhesive use
130100 Self Adhesive Clip.
Сравнете
Cable clip for adhesive use
FCC25-PVC-GY 154-00019
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Grey (GY) FCC25-PVC-GY 154-00019
Connector clip, black, 7000pcs.
Connector clip with fir tree includes clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip, black, 7000pcs.
CC03-PA66HIRHSUV-BK 151-00471
Сравнете
Добавяне към списъка с наблюдавани
7000 pcs.
Black (BK) CC03-PA66HIRHSUV-BK 151-00471
Connector clip for hole (oval), black, 500pcs.
Connector clip for hole (oval)
Сравнете
Connector clip for hole (oval), black, 500pcs.
CCFTOVAL-PA66HIRHS-BK 151-01057
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CCFTOVAL-PA66HIRHS-BK 151-01057
Connector clip for hole (oval), black, 1000pcs.
Сравнете
Connector clip for hole (oval), black, 1000pcs.
CCOVAL-S-PA66HIRHS-BK 151-02122
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) CCOVAL-S-PA66HIRHS-BK 151-02122
Connector clip, black, 500pcs.
Conector clip CCWA for wires.
Сравнете
Connector clip, black, 500pcs.
CCWA4.5-PA66HIRHS-BK 151-01392
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CCWA4.5-PA66HIRHS-BK 151-01392
Connector clip, EWCAP-005-11, black, 2500pcs.
Сравнете
Connector clip, EWCAP-005-11, black, 2500pcs.
SB5CC-PA66HIRHSUV-BK 151-01044
Сравнете
Добавяне към списъка с наблюдавани
2500 pcs.
Black (BK) SB5CC-PA66HIRHSUV-BK 151-01044
Connector clip for hole (oval), grey, 500pcs.
ConnectorClip for oval holes 7x12 mm, in line.
Сравнете
Connector clip for hole (oval), grey, 500pcs.
CCSFT7x12-PA66HIRHS-GY 151-00222
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) CCSFT7x12-PA66HIRHS-GY 151-00222
Samples ENG Ratchet P Clamp-DIV-BK
Сравнете
Samples ENG Ratchet P Clamp-DIV-BK
Samples ENG Ratchet P Clamp-DIV-BK 905-50036
Сравнете
Добавяне към списъка с наблюдавани
1 pack
Black (BK) Samples ENG Ratchet P Clamp-DIV-BK 905-50036
Samples Ratchet P Clamp-DIV-BK
Сравнете
Samples Ratchet P Clamp-DIV-BK
Samples Ratchet P Clamp-DIV-BK 905-50037
Сравнете
Добавяне към списъка с наблюдавани
1 pack
Black (BK) Samples Ratchet P Clamp-DIV-BK 905-50037
Cable tie mount for hole (round), Wmax=8.6mm, ⌀6.3 mm, black, 100pcs.
Securely fix and route cables and pipes with SFC3.
Сравнете
Cable tie mount for hole (round), Wmax=8.6mm, ⌀6.3 mm, black, 100pcs.
SFC3-PA66-BK 151-01906
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SFC3-PA66-BK 151-01906
Cable tie mount for hole (round), Wmax=4.8mm, ⌀6.5 mm, natural, 500pcs.
Сравнете
Cable tie mount for hole (round), Wmax=4.8mm, ⌀6.5 mm, natural, 500pcs.
LKCRF1-PA66-NA 151-27009
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) LKCRF1-PA66-NA 151-27009
Cable tie mount for hole (round), Wmax=4.8mm, ⌀6.5 mm, black, 500pcs.
Сравнете
Cable tie mount for hole (round), Wmax=4.8mm, ⌀6.5 mm, black, 500pcs.
LKCRF1-PA66-BK 151-00102
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) LKCRF1-PA66-BK 151-00102
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, black, 100pcs.
LKCSF1-PA66W-BK 151-01683
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) LKCSF1-PA66W-BK 151-01683
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount, T=3.0 - 6.0mm, black, 1000Bag
Сравнете
Cable tie mount, T=3.0 - 6.0mm, black, 1000Bag
ATSEC19-PA66HIRHS-BK 102-68390
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) ATSEC19-PA66HIRHS-BK 102-68390
Cable tie mount for magnetic use, Wmax=4.1mm, black, 25pcs.
Сравнете
Cable tie mount for magnetic use, Wmax=4.1mm, black, 25pcs.
MAGMB3-PA66/NDFEBR5-BK 151-04462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
25 pcs.
Black (BK) MAGMB3-PA66/NDFEBR5-BK 151-04462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Сравнете
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.
H3P-PA66-NA 211-60039
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) H3P-PA66-NA 211-60039
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.
H4P-PA66-NA 211-60049
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) H4P-PA66-NA 211-60049
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Сравнете
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.
T18L-PA66W-BK 111-02160
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T18L-PA66W-BK 111-02160
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀17.0-102.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀17.0-102.0mm, metal, 100pcs.
MBT14SS-SS304-ML 111-93148
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MBT14SS-SS304-ML 111-93148
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀17.0-50.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Сравнете
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀17.0-50.0mm, metal, 100pcs.
MBT8SS-SS304-ML 111-93088
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MBT8SS-SS304-ML 111-93088
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 500pcs.
Сравнете
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 500pcs.
T50RSBS5-PA66HS-BK 150-21291
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50RSBS5-PA66HS-BK 150-21291
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.
Cable tie with edge clip.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.
T50ROSEC4A-PA66W-BK 156-00948
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50ROSEC4A-PA66W-BK 156-00948
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for top cable routing.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4B-PA66W-BK 156-01154
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC4B-PA66W-BK 156-01154
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Сравнете
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50REC4B-PA66HS/PA66HIRHS-BK 156-00009
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50REC4B-PA66HS/PA66HIRHS-BK 156-00009
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC23 - the cable bundle runs parallel with the edge.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC23-PA66W-BK 156-00843
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC23-PA66W-BK 156-00843
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
Automatic Harness Clip AHC2BH open.
Сравнете
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
AHC2BH-PA66HIRHS-BK 151-02882
Сравнете
Добавяне към списъка с наблюдавани
900 pcs.
Black (BK) AHC2BH-PA66HIRHS-BK 151-02882
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
Сравнете
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
HC140SFT62x122-PA6HIR-BK 151-00423
Сравнете
Добавяне към списъка с наблюдавани
1200 pcs.
Black (BK) HC140SFT62x122-PA6HIR-BK 151-00423

Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 17/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Актуализиране: 17/08/2025 | Настройките за поверителност
Дистрибутори Контакт