05/09/2026

Резултати за „D-Clip Series“

Моля обърнете внимание:  Търсената от вас комбинация от термини не връща съответстващи резултати.  По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

Има резултати в следните категории:

3 272 продукти
Нулиране на всички
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
2-piece fixing tie with edge clip 1-3mm, side fixing.
Сравнете
T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010
Сравнете
Добавяне към списъка с наблюдавани
2-piece fixing tie with edge clip 1-3mm, side fixing.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Сравнете
T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Fixing tie for edge, outside serrated
Сравнете
T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006
Сравнете
Добавяне към списъка с наблюдавани
Fixing tie for edge, outside serrated
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Сравнете
1612-1-B5W2-PO-X-BK 416-12046
Сравнете
Добавяне към списъка с наблюдавани
The appropriate end cap for every cable diameter and cable types.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) 1612-1-B5W2-PO-X-BK 416-12046
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Сравнете
1614-1-B5W2-PO-X-BK 416-14047
Сравнете
Добавяне към списъка с наблюдавани
The appropriate end cap for every cable diameter and cable types.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) 1614-1-B5W2-PO-X-BK 416-14047
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
Сравнете
HFT-A-1.2/0.6-PO-X-BN 305-01201
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 meter
Brown (BN) HFT-A-1.2/0.6-PO-X-BN 305-01201
Heat Shrinkable Tubing 2:1 1,2/0,6 green
Сравнете
HFT-A-1.2/0.6-PO-X-GN 305-01205
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 meter
Green (GN) HFT-A-1.2/0.6-PO-X-GN 305-01205
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 brown
Сравнете
HFT-A-1.6/0.8-PO-X-BN 305-01601
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 meter
Brown (BN) HFT-A-1.6/0.8-PO-X-BN 305-01601
Heat Shrinkable Tubing 2:1 1.6/0.8 green
Сравнете
HFT-A-1.6/0.8-PO-X-GN 305-01605
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 meter
Green (GN) HFT-A-1.6/0.8-PO-X-GN 305-01605
Heat shrinkable tubing 2:1 - flexible and coloured
Сравнете
HFT-A-2.4/1.2-PO-X-BN 305-02401
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 m
Brown (BN) HFT-A-2.4/1.2-PO-X-BN 305-02401
Heat Shrinkable Tubing 2:1 2.4/1.2 green
Сравнете
HFT-A-2.4/1.2-PO-X-GN 305-02405
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 meter
Green (GN) HFT-A-2.4/1.2-PO-X-GN 305-02405
Heat shrinkable tubing 2:1 - flexible and coloured
HFT-A conforms to major standards (VG) used in all Defence industries.
Сравнете
HFT-A-6.4/3.2-PO-X-GY 305-06408
Сравнете
Добавяне към списъка с наблюдавани
HFT-A conforms to major standards (VG) used in all Defence industries.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
300 meter
Grey (GY) HFT-A-6.4/3.2-PO-X-GY 305-06408
Heat shrinkable tubing 2:1 - flexible and coloured
Сравнете
HFT-A-12.7/6.4-PO-X-GY 305-12708
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 meter
Grey (GY) HFT-A-12.7/6.4-PO-X-GY 305-12708
Heat shrinkable tubing 2:1 - flexible and coloured
Сравнете
HFT-A-38.0/19.0-PO-X-BN 305-38101
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 m
Brown (BN) HFT-A-38.0/19.0-PO-X-BN 305-38101
Heat Shrinkable Tubing 2:1 38.0/19.0 green
Сравнете
HFT-A-38.0/19.0-PO-X-GN 305-38105
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 meter
Green (GN) HFT-A-38.0/19.0-PO-X-GN 305-38105
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-2.4/1.2-PO-X-CL 305-02419
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-2.4/1.2-PO-X-CL 305-02419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-19.0/9.5-PO-X-CL 305-19019
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 meter
Transparent (CL) HFT-B-19.0/9.5-PO-X-CL 305-19019
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-25.4/12.7-PO-X-CL 305-25419
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
25 m
Transparent (CL) HFT-B-25.4/12.7-PO-X-CL 305-25419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-38.0/19.0-PO-X-CL 305-38119
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 m
Transparent (CL) HFT-B-38.0/19.0-PO-X-CL 305-38119
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-50.8/25.4-PO-X-CL 305-50819
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
35 meter
Transparent (CL) HFT-B-50.8/25.4-PO-X-CL 305-50819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B -76.0/38.0-PO-X-CL 305-76219
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
25 meter
Transparent (CL) HFT-B -76.0/38.0-PO-X-CL 305-76219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-1.6/0.8-PO-X-CL 305-01619
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-1.6/0.8-PO-X-CL 305-01619
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-3.2/1.6-PO-X-CL 305-03219
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 m
Transparent (CL) HFT-B-3.2/1.6-PO-X-CL 305-03219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-4.8/2.4-PO-X-CL 305-04819
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
300 meter
Transparent (CL) HFT-B-4.8/2.4-PO-X-CL 305-04819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
HFT-B-12.7/6.4-PO-X-CL 305-12719
Сравнете
Добавяне към списъка с наблюдавани
3:1 shrink ratio tubing is ideal in many applications.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 m
Transparent (CL) HFT-B-12.7/6.4-PO-X-CL 305-12719
Heat Shrink Cable Joint Kit 16-50mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Сравнете
LVK-C-4x16-50-PO-X-BK 380-04016
Сравнете
Добавяне към списъка с наблюдавани
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) LVK-C-4x16-50-PO-X-BK 380-04016
Heat Shrink Cable Joint Kit 25-150mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Сравнете
LVK-C-4x25-150-PO-X-BK 380-04018
Сравнете
Добавяне към списъка с наблюдавани
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1 pack
Black (BK) LVK-C-4x25-150-PO-X-BK 380-04018
Cable grommet, ⌀19.0 mm, black, 500pcs.
Edge Protection Grommet - HV1101.
Сравнете
HV1101-PVC-FR-BK 633-01010
Сравнете
Добавяне към списъка с наблюдавани
Edge Protection Grommet - HV1101.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) HV1101-PVC-FR-BK 633-01010
Cable grommet, ⌀12.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1204.
Сравнете
HV1204-PVC-FR-BK 633-02040
Сравнете
Добавяне към списъка с наблюдавани
Edge Protection Grommet - HV1204.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV1204-PVC-FR-BK 633-02040
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1210.
Сравнете
HV1210-PVC-FR-BK 633-02100
Сравнете
Добавяне към списъка с наблюдавани
Edge Protection Grommet - HV1210.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV1210-PVC-FR-BK 633-02100
Cable grommet, ⌀10.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1218.
Сравнете
HV1218-PVC-FR-BK 633-02180
Сравнете
Добавяне към списъка с наблюдавани
Edge Protection Grommet - HV1218.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV1218-PVC-FR-BK 633-02180
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Bend Protection Grommet - HV2101.
Сравнете
HV2101-PVC-FR-BK 632-01010
Сравнете
Добавяне към списъка с наблюдавани
Bend Protection Grommet - HV2101.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) HV2101-PVC-FR-BK 632-01010
Cable marking carrier Helafix, 35.0x10.00mm, transparent, pack=50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Multi-purpose identification potential: Helafix HC and HCR.
Сравнете
HC09-35-EVA-CL 525-10353
Сравнете
Добавяне към списъка с наблюдавани
Multi-purpose identification potential: Helafix HC and HCR.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pack
Transparent (CL) HC09-35-EVA-CL 525-10353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tag, manual marking, 63.5x19.3mm, white, pack=100pcs.
Unlimited cable bundle diameters can be securely identified.
Сравнете
IMP2.5-PA66-WH 151-42259
Сравнете
Добавяне към списъка с наблюдавани
Unlimited cable bundle diameters can be securely identified.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) IMP2.5-PA66-WH 151-42259
Cable tag, manual marking, 44.0x19.0mm, natural, bag=100pcs.
Unlimited cable bundle diameters can be securely identified.
Сравнете
IT1-PA66-NA 151-42119
Сравнете
Добавяне към списъка с наблюдавани
Unlimited cable bundle diameters can be securely identified.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) IT1-PA66-NA 151-42119
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Сравнете
SSPC4-SS316L-ML 151-00837
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) SSPC4-SS316L-ML 151-00837
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Сравнете
SSPC5-SS316L-ML 151-00838
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) SSPC5-SS316L-ML 151-00838
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Сравнете
SSPC6-SS316L-ML 151-00839
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) SSPC6-SS316L-ML 151-00839
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Сравнете
SC6.6-PA66HIRHSUV-BK 151-00927
Сравнете
Добавяне към списъка с наблюдавани
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Сравнете
KK2-PA6HIR-BK 234-10200
Сравнете
Добавяне към списъка с наблюдавани
Klam-Klips KK1 - 4.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Сравнете
KK4-PA6HIR-BK 234-10400
Сравнете
Добавяне към списъка с наблюдавани
Klam-Klips KK1 - 4.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
ALU11-AL-NA 211-10110
Сравнете
Добавяне към списъка с наблюдавани
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
ALU12-AL-NA 211-10120
Сравнете
Добавяне към списъка с наблюдавани
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
ALU13-AL-NA 211-10130
Сравнете
Добавяне към списъка с наблюдавани
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU17C-AL/CR-BK 211-15170
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU19C-AL/CR-BK 211-15190
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
ALU23C P-Clamp with chloroprene insert.
Сравнете
ALU23C-AL/CR-BK 211-15230
Сравнете
Добавяне към списъка с наблюдавани
ALU23C P-Clamp with chloroprene insert.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU25C-AL/CR-BK 211-15250
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU26C-AL/CR-BK 211-15260
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU28C-AL/CR-BK 211-15280
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU29C-AL/CR-BK 211-15290
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU30C-AL/CR-BK 211-15300
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
ALU34C-AL/CR-BK 211-15340
Сравнете
Добавяне към списъка с наблюдавани
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
ALU8-AL-NA 211-10080
Сравнете
Добавяне към списъка с наблюдавани
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
CCOVAL3-PA66HIRHSUV-BK 151-01244
Сравнете
Добавяне към списъка с наблюдавани
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
CCOVAL4-PA66HIRHSUV-BK 151-01246
Сравнете
Добавяне към списъка с наблюдавани
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Сравнете
BC2212-PA66HIRHS-BK 151-00017
Сравнете
Добавяне към списъка с наблюдавани
The slim line BC series is particularly compact and flexible.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Bundling clip for hole (round), L=55.0mm, natural, 8000pcs.
Bundling Clip for round holes 6.5 mm.
Сравнете
TC2FT6LG-PA66HIRHS-NA 151-00828
Сравнете
Добавяне към списъка с наблюдавани
Bundling Clip for round holes 6.5 mm.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
8000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00828
Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.
Сравнете
WSI-PA66HIRHSUV-BK 111-12301
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) WSI-PA66HIRHSUV-BK 111-12301
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Сравнете
FBB100M-PA66HS-BK 150-29100
Сравнете
Добавяне към списъка с наблюдавани
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) FBB100M-PA66HS-BK 150-29100
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Сравнете
FBB185M-PA66HS-BK 150-29180
Сравнете
Добавяне към списъка с наблюдавани
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) FBB185M-PA66HS-BK 150-29180
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Сравнете
WSS8MM-PA66HIRHSW-BK 157-00034
Сравнете
Добавяне към списъка с наблюдавани
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Сравнете
WSI8MM-PA66HIRHSUV-BK 157-00035
Сравнете
Добавяне към списъка с наблюдавани
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) WSI8MM-PA66HIRHSUV-BK 157-00035
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Сравнете
T50SOSSBD-M6-PA66HSUV-BK 157-00038
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Сравнете
T50SOSSBD-M10-PA66HSW-BK 157-00040
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Сравнете
T50SOSSBU-M6-PA66HSUV-GY 157-00065
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Сравнете
T50SOSSBU-M10-PA66HSW-GY 157-00067
Сравнете
Добавяне към списъка с наблюдавани
T50SOSSBU-M8/10 for bundles which run below the stud.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Сравнете
T50ROSLPM8SMSO25-PA46-BN 157-00361
Сравнете
Добавяне към списъка с наблюдавани
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
2000 pcs.
Brown (BN) T50ROSLPM8SMSO25-PA46-BN 157-00361
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, black, 1000pcs.
Сравнете
T50SAH-PA66HS-BK 126-00163
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SAH-PA66HS-BK 126-00163
Fixing tie for hole (round), outside serrated, ⌀1.6-20.0mm, black, 100pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Сравнете
OS130-PA66W-BK 126-00060
Сравнете
Добавяне към списъка с наблюдавани
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) OS130-PA66W-BK 126-00060
Fixing tie for hole (round), ⌀1.0-27.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
RT18RSF-PA66V0-BK 115-00065
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RT18RSF-PA66V0-BK 115-00065
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
3000 pcs.
Grey (GY) T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFT8SO25A-PA66HIRHS-GY 157-00120
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50ROSFT8SO25A-PA66HIRHS-GY 157-00120
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 4000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
4000 pcs.
Black (BK) T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
3000 pcs.
Black (BK) T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169
Fixing tie for hole (round), outside serrated, ⌀1.6-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Сравнете
Добавяне към списъка с наблюдавани
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Сравнете
OS170-FT7-PA66-BK 157-00017
Сравнете
Добавяне към списъка с наблюдавани
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) OS170-FT7-PA66-BK 157-00017
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Сравнете
OS170-FT7-LH-PA66-BK 157-00019
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) OS170-FT7-LH-PA66-BK 157-00019
Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.
Сравнете
OS170-FT7-LH-PA66HSUV-BK 157-00122
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) OS170-FT7-LH-PA66HSUV-BK 157-00122
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Сравнете
T50SVCOC10-14-PA46-GY 156-01045
Сравнете
Добавяне към списъка с наблюдавани
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50SVCOC10-14-PA46-GY 156-01045
Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Сравнете
T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Сравнете
Добавяне към списъка с наблюдавани
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Сравнете
T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Сравнете
Добавяне към списъка с наблюдавани
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Сравнете
T50RSB5-PA66/POM-BK 156-00742
Сравнете
Добавяне към списъка с наблюдавани
Cable ties with various weld stud fixing methods.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
250 pcs.
Black (BK) T50RSB5-PA66/POM-BK 156-00742
Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Сравнете
T50SOSSBS5-PA66HS-BK 156-01746
Сравнете
Добавяне към списъка с наблюдавани
Cable ties with various weld stud fixing methods.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
250 pcs.
Black (BK) T50SOSSBS5-PA66HS-BK 156-01746
Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Сравнете
T50SOSSBH5-PA66HS-BK 156-01744
Сравнете
Добавяне към списъка с наблюдавани
Cable ties with various weld stud fixing methods.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSSBH5-PA66HS-BK 156-01744
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Сравнете
T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Сравнете
Добавяне към списъка с наблюдавани
The holding tab increases the tensile strength additionaly.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Сравнете
T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Сравнете
Добавяне към списъка с наблюдавани
The holding tab increases the tensile strength additionaly.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Fixing tie for hole (round), outside serrated, ⌀2.0-45.0mm, black, 100pcs.
Сравнете
T50ROSFT8-PA66HS-BK 156-00360
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50ROSFT8-PA66HS-BK 156-00360
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.
Сравнете
T50RFT62x122HR-PA46-GY 156-00446
Сравнете
Добавяне към списъка с наблюдавани
T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50RFT62x122HR-PA46-GY 156-00446
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
SMB4APT-A-PA66HS/A-BK 151-03334
Сравнете
Добавяне към списъка с наблюдавани
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03334
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm
Сравнете
CL8-PA66W-BK 151-02259
Сравнете
Добавяне към списъка с наблюдавани
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
FH Cable Tie Mounts for areas with limited space.
Сравнете
FH18-PA66-NA 151-61119
Сравнете
Добавяне към списъка с наблюдавани
FH Cable Tie Mounts for areas with limited space.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
FH Cable Tie Mounts for areas with limited space.
Сравнете
FH30-PA66-NA 151-61319
Сравнете
Добавяне към списъка с наблюдавани
FH Cable Tie Mounts for areas with limited space.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
LKM / CL8 Cable Tie Mounts with curved design.
Сравнете
LKM-PA66-NA 151-26304
Сравнете
Добавяне към списъка с наблюдавани
LKM / CL8 Cable Tie Mounts with curved design.
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
LKCSF1-PA66-NA 151-27219
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
LKCSF1-PA66-BK 151-27202
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) LKCSF1-PA66-BK 151-27202
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
CTM0-PA66-WH 151-30303
Сравнете
Добавяне към списъка с наблюдавани
Сравнете
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
  Bulgaria

Социални медии

© HellermannTyton 2026 (v4.313.2)  |  Актуализиране: 30/08/2026  |  Настройките за поверителност
Дистрибутори Контакт