Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
16/10/2025

Results for "hard line high frequency"

10,678 products found 추가 콘텐츠 1개
참고사항:  검색한 검색어의 조합이 일치하는 결과를 반영하지 않았습니다.  다음은 검색 결과와 일치하는 결과입니다.

Tip : 검색어를 변경하거나 삭제하여 검색 결과의 관련성을 높여보십시오.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (5295)

Cable Ties Inside Serrated  (1509) Cable Ties Outside Serrated  (99) Cable Ties Without Serration  (42) Cable Ties, Releasable  (39) Cable Ties, Stainless Steel  (228) Cable Ties With Fixing Elements  (1597) Cable Tie Mounts  (374) Fixing Elements  (372) Clips, Clamps and Plugs  (1705)
Cable Ties and Fixings
Cable Ties and Fixings (5295)
Insulation

Insulation  (2687)

Heat Shrink Tubing  (1658) Heat Shrinkable Moulded Shapes  (520) Insulating tubes  (516)
Insulation
Insulation (2687)
Cable Protection Systems

Cable Protection Systems  (1506)

Non-Metallic Conduit Systems  (647) Metallic Conduit Systems  (112) Spiral-Reinforced Conduit Systems  (68) Conduit System Accessories  (31) Protective Tubing and Spiral Binding  (91) Expandable Braided Sleeves  (400) Open Woven Sleeves  (417) Edge Protection  (17) Grommets  (60) Wiring Ducts and Accessories  (80)
Cable Protection Systems
Cable Protection Systems (1506)
Electrical Installation

Electrical Installation  (171)

Downlight Covers  (4) Cable Rods  (3) Electrical Tapes  (87) Cast Resin Technology  (66) Gel Technology  (11)
Electrical Installation
Electrical Installation (171)
Identification Systems

Identification Systems  (888)

Wire and Cable Markers  (488) Control Panel Labelling  (159) Industrial Identification  (246) RFID tags and cable ties  (63) Security Labeling  (27) Hazardous Area Identification  (7) Printers and Software  (99)
Identification Systems
Identification Systems (888)
Application Tooling

Application Tooling  (134)

Automatic Cable Tying System  (27) Application Tooling for Cable Ties  (97) Application Tooling for Snappers  (3) Application Tooling for Heat Shrinkable Tubing  (1) Application Tooling for Non Shrinkable Tubing  (6)
Application Tooling
Application Tooling (134)
Safety Equipment

Safety Equipment  (3)

EasyDoor  (3)
Safety Equipment
Safety Equipment (3)
10,678 개의 제품을
모두 초기화
Cable tie inside serrated, 715x13mm, ⌀12-205mm, black, 50pcs.
Compare
Cable tie inside serrated, 715x13mm, ⌀12-205mm, black, 50pcs.
X250I-PA66W-BK 108-00047
Compare
Add to watchlist
50 pcs.
Black (BK) X250I-PA66W-BK 108-00047
Releasable cable tie, 226.06x12.6mm, ⌀13.0-50.0mm, 1115N, black, 1000pcs.
Heavy duty cable tie features a release in the head for easier bundle maintenance.
Compare
Releasable cable tie, 226.06x12.6mm, ⌀13.0-50.0mm, 1115N, black, 1000pcs.
SR255S-PA66HIRHSUV-BK 115-42001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) SR255S-PA66HIRHSUV-BK 115-42001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 225.0x12.6mm, ⌀13.0-50.0mm, 1115N, black, 25pcs.
Heavy duty cable tie features a release in the head for easier bundle maintenance.
Compare
Releasable cable tie, 225.0x12.6mm, ⌀13.0-50.0mm, 1115N, black, 25pcs.
SR255S-PA66HIRHSUV-BK 115-42002
Compare
Add to watchlist
25
Black (BK) SR255S-PA66HIRHSUV-BK 115-42002
Releasable cable tie, 370.0x12.6mm, ⌀13.0-100.0mm, 1115N, black, 500pcs.
Heavy duty cable tie features a release in the head for easier bundle maintenance.
Compare
Releasable cable tie, 370.0x12.6mm, ⌀13.0-100.0mm, 1115N, black, 500pcs.
SR255X-PA66HIRHSUV-BK 115-42100
Compare
Add to watchlist
500 pcs.
Black (BK) SR255X-PA66HIRHSUV-BK 115-42100
Releasable cable tie, 370.0x12.6mm, ⌀13.0-100.0mm, 1115N, black, 25pcs.
Heavy duty cable tie features a release in the head for easier bundle maintenance.
Compare
Releasable cable tie, 370.0x12.6mm, ⌀13.0-100.0mm, 1115N, black, 25pcs.
SR255X-PA66HIRHSUV-BK 115-42101
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) SR255X-PA66HIRHSUV-BK 115-42101
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 370.0x12.6mm, ⌀13.0-100.0mm, 1115N, black, 100pcs.
Heavy duty cable tie features a release in the head for easier bundle maintenance.
Compare
Releasable cable tie, 370.0x12.6mm, ⌀13.0-100.0mm, 1115N, black, 100pcs.
SR255X-PA66HIRHSUV-BK 115-00157
Compare
Add to watchlist
100 pcs.
Black (BK) SR255X-PA66HIRHSUV-BK 115-00157
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, natural, 100pcs.
Cable Tie T50ROS.
Compare
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, natural, 100pcs.
T50ROS-PA46-NA 118-00040
Compare
Add to watchlist
100 pcs.
Natural (NA) T50ROS-PA46-NA 118-00040
Cable tie outside serrated for narrow bundling, 150x3.3mm, ⌀35mm, black, 100pcs.
V-Series with 90° angled head provides a practical solution due to its unique rounded design.
Compare
Cable tie outside serrated for narrow bundling, 150x3.3mm, ⌀35mm, black, 100pcs.
V150R-PA66-BK 118-00117
Compare
Add to watchlist
100 pcs.
Black (BK) V150R-PA66-BK 118-00117
Cable clip for hole (oval), T=0.7-2.0mm, ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
Automatic Harness Clip AHC2BH open.
Compare
Cable clip for hole (oval), T=0.7-2.0mm, ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
AHC2BH-PA66HIRHS-BK 151-02517
Compare
Add to watchlist
2000 pcs.
Black (BK) AHC2BH-PA66HIRHS-BK 151-02517
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
Automatic Harness Clip AHC2BH open.
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
AHC2BH-PA66HIRHS-BK 151-02882
Compare
Add to watchlist
900 pcs.
Black (BK) AHC2BH-PA66HIRHS-BK 151-02882
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
Compare
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
AHC3DH-PA66HIRHS-BK 151-00181
Compare
Add to watchlist
300 pcs.
Black (BK) AHC3DH-PA66HIRHS-BK 151-00181
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
Compare
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
HC140SFT62x122-PA6HIR-BK 151-00423
Compare
Add to watchlist
1200 pcs.
Black (BK) HC140SFT62x122-PA6HIR-BK 151-00423
Cable clip for hole (round), ⌀7.8 - 8.2 mm
Compare
Cable clip for hole (round), ⌀7.8 - 8.2 mm
CTCLPROFILE-PA66HIRHS-BK 151-00026
Compare
Add to watchlist
500 pcs.
Black (BK) CTCLPROFILE-PA66HIRHS-BK 151-00026
Cable clip for hole (round), ⌀6.3 - 6.7 mm
Fixing element with short arrow head for round holes and for pipes and harnesses 1.0 - 3.0 mm.
Compare
Cable clip for hole (round), ⌀6.3 - 6.7 mm
KSFT6.5OC1-3-PA66HIRHS-BK 151-01843
Compare
Add to watchlist
2500 pcs.
Black (BK) KSFT6.5OC1-3-PA66HIRHS-BK 151-01843
Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC( )AH in combination with an IAHC( )T.
Compare
Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC3BH-PA66HIRHS-BK 151-00380
Compare
Add to watchlist
650 pcs.
Black (BK) IAHC3BH-PA66HIRHS-BK 151-00380
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7 for simple and secure installation of corrugated tubing.
Compare
Cable clip, T=1.0 - 6.0mm, ⌀6.4 - 6.8 mm, Dmax=15.7mm
PC15FT7-PA66HIRHSUV-BK 151-14303
Compare
Add to watchlist
1000 pcs.
Black (BK) PC15FT7-PA66HIRHSUV-BK 151-14303
Cable clip for hole (round), T=0.6 - 8.25mm, ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=15.0mm, Dmax=19.0mm
Locking clamp creates a full and secure lock completely around a wire bundle ranging from 5-25 mm.
Compare
Cable clip for hole (round), T=0.6 - 8.25mm, ⌀6.1 - 6.6 mm (hexagonal)/6.1 - 7.0 mm, Dmin=15.0mm, Dmax=19.0mm
LOC15-19FT6LG2-PA66HIRHSUV-BK 151-01023
Compare
Add to watchlist
2000 pcs.
Black (BK) LOC15-19FT6LG2-PA66HIRHSUV-BK 151-01023
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=20.0mm, Dmax=25.0mm, nom⌀=22.0 mm
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=20.0mm, Dmax=25.0mm, nom⌀=22.0 mm
MOC22FT6.5-PA66HIRHSUV-BK 151-01798
Compare
Add to watchlist
2000 pcs.
Black (BK) MOC22FT6.5-PA66HIRHSUV-BK 151-01798
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
A rotatable dual routing clip that keeps two routings secured and separated.
Compare
Cable clip for hole (round), T=0.6 - 5.5mm, ⌀6.1 - 6.9 mm/6.35 mm (hexagonal), Dmin=23.0mm, Dmax=29.0mm, nom⌀=26.0 mm
MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Compare
Add to watchlist
1000 pcs.
Black (BK) MOC26FT6.5-PA66HIRHSUV-BK 151-01828
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
The 360 degree enclosure ensures the entire bundle is secure when being routed by the LOC clip.
Compare
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03863
Compare
Add to watchlist
1000
Black (BK) LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03863
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
The 360 degree enclosure ensures the entire bundle is secure when being routed by the LOC clip.
Compare
Cable clip, T=0.6 - 8.25mm, ⌀6.1 - 7.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03899
Compare
Add to watchlist
100
Black (BK) LOC10-14XFT6LG-PA66HIRHSUV-BK 151-03899
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC-Series, Fir tree mount for oval holes (9 x 12mm).
Compare
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03864
Compare
Add to watchlist
1000
Black (BK) LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03864
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC-Series, Fir tree mount for oval holes (9 x 12mm).
Compare
Cable clip, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10.0 - 14.0 mm
LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03902
Compare
Add to watchlist
100
Black (BK) LOC10-14XFT9X12-PA66HIRHSUV-BK 151-03902
Corrugated tube clip for hole (round), nom⌀15.0mm, black, 5000pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round), nom⌀15.0mm, black, 5000pcs.
CTCFT6-PA66HIRHS-BK 151-02856
Compare
Add to watchlist
5000 pcs.
Black (BK) CTCFT6-PA66HIRHS-BK 151-02856
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 6000pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 6000pcs.
CTCL4.5FT6LG-PA66HIRHS-BK 151-02274
Compare
Add to watchlist
6000 pcs.
Black (BK) CTCL4.5FT6LG-PA66HIRHS-BK 151-02274
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG Clamps.
Compare
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Compare
Add to watchlist
500 pcs.
Blue (BU) CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Compare
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
CTC8FT6-PA66HIRHS-BK 151-01543
Compare
Add to watchlist
500 pcs.
Black (BK) CTC8FT6-PA66HIRHS-BK 151-01543
Blind plug, ⌀M6, T=M6mm, black, 5000pcs.
Disc covers the hole and minimizes ingress of dust, dirt and water.
Compare
Blind plug, ⌀M6, T=M6mm, black, 5000pcs.
M6PUSHPIN-PA66HIRHSUV-BK 151-01304
Compare
Add to watchlist
5000 pcs.
Black (BK) M6PUSHPIN-PA66HIRHSUV-BK 151-01304
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 5.5mm, grey, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 5.5mm, grey, 5000pcs.
FT6.5 Plug-PA66HIRHS-GY 151-02958
Compare
Add to watchlist
5000 pcs.
Grey (GY) FT6.5 Plug-PA66HIRHS-GY 151-02958
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.9 mm, T=0.6 - 6.0mm, black, 5000pcs.
FT6.5Plug-PA66HIRHSUV-BK 151-01317
Compare
Add to watchlist
5000 pcs.
Black (BK) FT6.5Plug-PA66HIRHSUV-BK 151-01317
Blind plug, ⌀6.1 - 6.7 mm, T=0.6 - 12.5mm, black, 5000pcs.
Compare
Blind plug, ⌀6.1 - 6.7 mm, T=0.6 - 12.5mm, black, 5000pcs.
FT6.5SDLGPLUG-PA66HIRHSUV-BK 151-03252
Compare
Add to watchlist
5000 pcs.
Black (BK) FT6.5SDLGPLUG-PA66HIRHSUV-BK 151-03252
Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black
Compare
Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black
AHC25FT6LG-PA66HIRHS-BK 151-01198
Compare
Add to watchlist
1300 pcs.
Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198
Cable clip for stud, Dmin=23mm, Dmax=25.5mm, ⌀5 mm
Compare
Cable clip for stud, Dmin=23mm, Dmax=25.5mm, ⌀5 mm
7703079485-PA66HIRHS-BN 151-00345
Compare
Add to watchlist
700 pcs.
Brown (BN) 7703079485-PA66HIRHS-BN 151-00345
Cable clip for stud
Compare
Cable clip for stud
ICD5X10-PA66HIRHS-BK 151-00361
Compare
Add to watchlist
2000 pcs.
Black (BK) ICD5X10-PA66HIRHS-BK 151-00361
Cable clip for stud
Pipe clip secures routing to panel using a stud mount suited for a 5 or 6mm stud or bolt.
Compare
Cable clip for stud
PC5SM6-PA66HIRHSUV-BK 151-03360
Compare
Add to watchlist
500 pcs.
Black (BK) PC5SM6-PA66HIRHSUV-BK 151-03360
Cable clip for adhesive use, ⌀3.3 mm
ASI Clip Self Adhesive / Screw Clip
Compare
Cable clip for adhesive use, ⌀3.3 mm
ASI-Clip-PA66HIR-NA 150-11294
Compare
Add to watchlist
500 pcs.
Natural (NA) ASI-Clip-PA66HIR-NA 150-11294
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, black, 1000pcs.
H13P-PA66-BK 211-60138
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H13P-PA66-BK 211-60138
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, black, 1000pcs.
H14P-PA66-BK 211-60148
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H14P-PA66-BK 211-60148
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
H1P-PA66-BK 211-60011
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H1P-PA66-BK 211-60011
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 100pcs.
H1P-PA66-NA 211-00261
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100
Natural (NA) H1P-PA66-NA 211-00261
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, red, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, red, 1000pcs.
H2P-PA66-RD 211-60022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Red (RD) H2P-PA66-RD 211-60022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, blue, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, blue, 1000pcs.
H2P-PA66-BU 211-60026
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Blue (BU) H2P-PA66-BU 211-60026
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66-BK 211-60012
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H2P-PA66-BK 211-60012
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 100pcs.
H2P-PA66-NA 211-00263
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100
Natural (NA) H2P-PA66-NA 211-00263
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
H2P-PA66HS-BK 211-60030
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H2P-PA66HS-BK 211-60030
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 1000pcs.
H2P-PA66HS-BK 211-00262
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000
Black (BK) H2P-PA66HS-BK 211-00262
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 1000pcs.
H3P-PA66-BK 211-60041
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H3P-PA66-BK 211-60041
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66-BK 211-60013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H3P-PA66-BK 211-60013
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 100pcs.
H3P-PA66-NA 211-00264
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100
Natural (NA) H3P-PA66-NA 211-00264
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
H4P-PA66HS-BK 211-60064
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H4P-PA66HS-BK 211-60064
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
H4P-PA66-BK 211-60051
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H4P-PA66-BK 211-60051
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66-BK 211-60014
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H4P-PA66-BK 211-60014
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 100pcs.
H4P-PA66-NA 211-00265
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100
Natural (NA) H4P-PA66-NA 211-00265
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 1000pcs.
H5P-PA66-BK 211-60057
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H5P-PA66-BK 211-60057
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66-BK 211-60015
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H5P-PA66-BK 211-60015
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 100pcs.
H5P-PA66-NA 211-00267
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100
Natural (NA) H5P-PA66-NA 211-00267
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
H6P-PA66-BK 211-60060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H6P-PA66-BK 211-60060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66-BK 211-60016
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H6P-PA66-BK 211-60016
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 100pcs.
H6P-PA66-NA 211-00268
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) H6P-PA66-NA 211-00268
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
H6P-PA66HS-BK 211-60055
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H6P-PA66HS-BK 211-60055
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
H7P-PA66-BK 211-60077
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H7P-PA66-BK 211-60077
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
H7P-PA66-BK 211-60017
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H7P-PA66-BK 211-60017
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
H7P-PA66HS-BK 211-60056
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H7P-PA66HS-BK 211-60056
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
H7P-PA66V0-BK 211-00215
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H7P-PA66V0-BK 211-00215
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 100pcs.
H8P-PA66-NA 211-00270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) H8P-PA66-NA 211-00270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 1000pcs.
H8P-PA66HS-BK 211-60062
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H8P-PA66HS-BK 211-60062
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
H9P-PA66-BK 211-60097
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H9P-PA66-BK 211-60097
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 100pcs.
H9P-PA66-NA 211-00271
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100
Natural (NA) H9P-PA66-NA 211-00271
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 1000pcs.
H9P-PA66HS-BK 211-60063
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Black (BK) H9P-PA66HS-BK 211-60063
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=17.4mm, Dmax=20.0mm, ⌀4.0 mm, black, 200pcs.
Compare
P-clamp closed, Dmin=17.4mm, Dmax=20.0mm, ⌀4.0 mm, black, 200pcs.
NX11-PA66-BK 221-10110
Compare
Add to watchlist
200 pcs.
Black (BK) NX11-PA66-BK 221-10110
P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.
Compare
P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.
NX14-PA66-BK 221-10140
Compare
Add to watchlist
100 pcs.
Black (BK) NX14-PA66-BK 221-10140
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, natural, 100pcs.
AB10N-PA66-NA 211-00175
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB10N-PA66-NA 211-00175
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=14.5mm, ⌀4.3 mm, black, 100pcs.
AB10N-PA66W-BK 211-00176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB10N-PA66W-BK 211-00176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, natural, 100pcs.
AB11N-PA66-NA 211-00177
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB11N-PA66-NA 211-00177
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=16.5mm, ⌀5.1 mm, black, 100pcs.
AB11N-PA66W-BK 211-00178
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB11N-PA66W-BK 211-00178
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, natural, 100pcs.
AB12N-PA66-NA 211-00179
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB12N-PA66-NA 211-00179
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=17.5mm, ⌀5.1 mm, black, 100pcs.
AB12N-PA66W-BK 211-00180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB12N-PA66W-BK 211-00180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, natural, 100pcs.
AB13N-PA66-NA 211-00181
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB13N-PA66-NA 211-00181
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=20.0mm, ⌀5.1 mm, black, 100pcs.
AB13N-PA66W-BK 211-00182
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB13N-PA66W-BK 211-00182
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, natural, 100pcs.
AB14N-PA66-NA 211-00183
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB14N-PA66-NA 211-00183
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, black, 100pcs.
AB14N-PA66W-BK 211-00184
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB14N-PA66W-BK 211-00184
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, natural, 100pcs.
AB16N-PA66-NA 211-00185
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB16N-PA66-NA 211-00185
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, black, 100pcs.
AB16N-PA66W-BK 211-00186
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB16N-PA66W-BK 211-00186
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, natural, 50pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, natural, 50pcs.
AB18N-PA66-NA 211-00187
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Natural (NA) AB18N-PA66-NA 211-00187
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, black, 50pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=24.5mm, Dmax=27.0mm, ⌀5.1 mm, black, 50pcs.
AB18N-PA66W-BK 211-00188
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) AB18N-PA66W-BK 211-00188
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, natural, 50pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, natural, 50pcs.
AB24N-PA66-NA 211-00189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Natural (NA) AB24N-PA66-NA 211-00189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, black, 50pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=31.5mm, Dmax=37.0mm, ⌀5.1 mm, black, 50pcs.
AB24N-PA66W-BK 211-00190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) AB24N-PA66W-BK 211-00190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, natural, 100pcs.
AB2N-PA66-NA 211-00191
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB2N-PA66-NA 211-00191
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, black, 100pcs.
AB2N-PA66W-BK 211-00192
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB2N-PA66W-BK 211-00192
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, white, 100pcs.
Compare
P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, white, 100pcs.
AB2N-PA66V0-WH 211-00276
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
White (WH) AB2N-PA66V0-WH 211-00276
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, natural, 25pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, natural, 25pcs.
AB32N-PA66-NA 211-00193
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Natural (NA) AB32N-PA66-NA 211-00193
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, black, 25pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmin=43.5mm, Dmax=49.0mm, ⌀5.1 mm, black, 25pcs.
AB32N-PA66W-BK 211-00194
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) AB32N-PA66W-BK 211-00194
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, natural, 100pcs.
AB3N-PA66-NA 211-00195
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB3N-PA66-NA 211-00195
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pcs.
AB3N-PA66W-BK 211-00197
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB3N-PA66W-BK 211-00197
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pc.
Compare
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, black, 100pc.
AB-3N-PPCOND-BK 151-01344
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pc.
Black (BK) AB-3N-PPCOND-BK 151-01344
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, white, 100pcs.
Compare
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, white, 100pcs.
AB3N-PA66V0-WH 211-00277
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
White (WH) AB3N-PA66V0-WH 211-00277
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, black, 100pcs.
AB4N-PA66W-BK 211-00204
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB4N-PA66W-BK 211-00204
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, white, 100pcs.
Compare
P-clamp closed, Dmax=6.0mm, ⌀4.3 mm, white, 100pcs.
AB4N-PA66V0-WH 211-00278
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
White (WH) AB4N-PA66V0-WH 211-00278
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, natural, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, natural, 100pcs.
AB5N-PA66-NA 211-00205
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) AB5N-PA66-NA 211-00205
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, black, 100pcs.
Compare
P-clamp closed, Dmax=7.5mm, ⌀4.3 mm, black, 100pcs.
AB5N-PA66W-BK 211-00206
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) AB5N-PA66W-BK 211-00206
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
YouTube  LinkedIn  Link Corporate Blog 
문의하기 법적고지 저작권고지 지침 및 책무 개인정보 보호 정책 뉴스레터 사이트맵
업데이트: 12/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.288.2) | 업데이트: 12/10/2025 | 개인 정보 설정
문의