Visit your local site for the relevant product catalog, pricing, service and events
Proceed
24/06/2026

Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

35 produse

		


		

			
		


		

			
		



		

			
		


		

		

		
	




		

	





	

		

			
			

				

					
					
				

			

			

					

						
						
					

				

			

	

	

	

		

			

				
				
						

							
								

									
										

								Resetați toate
									
							

						
					

        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU10-AL-NA
211-10100
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU10-AL-NA
211-10100
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU10C-CR/AL-BK
211-15100
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU10C-CR/AL-BK
211-15100
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU11-AL-NA
211-10110
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU11-AL-NA
211-10110
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU11C-AL/CR-BK
211-15110
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU11C-AL/CR-BK
211-15110
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU12-AL-NA
211-10120
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU12-AL-NA
211-10120
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU12C-AL/CR-BK
211-15120
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU12C-AL/CR-BK
211-15120
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU13-AL-NA
211-10130
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU13-AL-NA
211-10130
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU13C-AL/CR-BK
211-15130
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU13C-AL/CR-BK
211-15130
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU14C-AL/CR-BK
211-15140
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU14C-AL/CR-BK
211-15140
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU15C-AL/CR-BK
211-15150
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU15C-AL/CR-BK
211-15150
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU16C-AL/CR-BK
211-15160
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU16C-AL/CR-BK
211-15160
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU17C-AL/CR-BK
211-15170
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU17C-AL/CR-BK
211-15170
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU18C-AL/CR-BK
211-15180
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU18C-AL/CR-BK
211-15180
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU19C-AL/CR-BK
211-15190
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU19C-AL/CR-BK
211-15190
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU20C-AL/CR-BK
211-15200
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU20C-AL/CR-BK
211-15200
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU22C-AL/CR-BK
211-15220
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU22C-AL/CR-BK
211-15220
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                ALU23C P-Clamp with chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU23C-AL/CR-BK
211-15230
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            ALU23C P-Clamp with chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU23C-AL/CR-BK
211-15230
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU24C-AL/CR-BK
211-15240
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU24C-AL/CR-BK
211-15240
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU25C-AL/CR-BK
211-15250
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU25C-AL/CR-BK
211-15250
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU26C-AL/CR-BK
211-15260
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU26C-AL/CR-BK
211-15260
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU28C-AL/CR-BK
211-15280
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU28C-AL/CR-BK
211-15280
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU29C-AL/CR-BK
211-15290
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU29C-AL/CR-BK
211-15290
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU30C-AL/CR-BK
211-15300
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU30C-AL/CR-BK
211-15300
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU34C-AL/CR-BK
211-15340
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        50 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU34C-AL/CR-BK
211-15340
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU4-AL-NA
211-10040
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU4-AL-NA
211-10040
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU4C-AL/CR-BK
211-15040
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU4C-AL/CR-BK
211-15040
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU5-AL-NA
211-10050
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU5-AL-NA
211-10050
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU5C-AL/CR-BK
211-15050
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU5C-AL/CR-BK
211-15050
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU6C-AL/CR-BK
211-15060
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU6C-AL/CR-BK
211-15060
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU7-AL-NA
211-10070
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU7-AL-NA
211-10070
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU7C-AL/CR-BK
211-15070
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU7C-AL/CR-BK
211-15070
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU8-AL-NA
211-10080
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU8-AL-NA
211-10080
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU8C-AL/CR-BK
211-15080
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU8C-AL/CR-BK
211-15080
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clips (Alu) with Rubber Insert for vibration resistance
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU9C-AL/CR-BK
211-15090
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clips (Alu) with Rubber Insert for vibration resistance
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Black (BK)
                      
                                            ALU9C-AL/CR-BK
211-15090
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



        

                        

                        

                            

                                
                                    P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
                                
                            


                            

                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                

                            

                            

                            
                                P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                        
                            

                                    
                                    Comparare
                                

                            


                            

                            

                                ALU6-AL-NA
211-10060
                            


                            

                                    
                                    Comparare
                                

                            



                        

                            

                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                        


                    


                        

                        

                            

                                
                                        

                                        
                                            P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
                                                    
                                        

                                                
                                                Comparare
                                            

                                        

                                		

                                    
                                    

                                    

                                        

                                                
                                                Comparare
                                            

                                        

                                            

                                                            

			
			
				Adăugați la lista de urmărire
				
			


		
	

                                                        

                                    

                                		

                                    
                                    

                                        100 pcs.


                                    

                                        
                        
                            Natural (NA)
                      
                                            ALU6-AL-NA
211-10060
                                        

                                    		

                                    
                                    Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
                                    
                            

                        


                    

                		

            



		

	













		

			Cable Ties and Fixings

		
HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

	

	



		

			

        

            

                

                    

                        

                            
                                Coliere de cabluri și cleme
                            
                            
                                Coliere de cabluri și cleme
                            
                        

                        

                            

                                
Coliere de cabluri și cleme

                                
În prezent, colierele de cabluri trebuie să poată satisface cele mai variate cerințe, deoarece sunt utilizate în cea mai largă gamă de operațiuni, de la simpla legare a cablurilor cu coliere de cabluri, până la utilizarea specifică a colierelor de cabluri în condiții extreme.

                                
                                    Coliere de plastic
                            

                        

                    

                

            

        

    

    

        

            

                

                    

                        

                            
                                Cleme de fixare a cablurilor
                            
                            
                                Cleme de fixare a cablurilor
                            
                        

                        

                            

                                
Clipsuri cablu pentru aplicații de uz industrial

                                
De la cleme de fixare a cablurilor cu adeziv la cleme de fixare a cablurilor pentru rutare în paralel sau gestionarea fluidelor: descoperiți aici portofoliul nostru de produse.

                                
                                    Clipsuri cablu
                            

                        

                    

                

            

        

    

    

        

            

                

                    

                        

                            
                                
                            
                            
                                
                            
                        

                        

                            

                                
Clemă fixare pentru muchii: Fixarea cablurilor fără găurire

                                
EdgeClip este o soluție de fixare pentru ghidarea flexibilă a cablajelor, furtunurilor sau tubulaturilor în diverse aplicații industriale, printre altele, în industria auto.

                                
                                    Clemă fixare pentru muchii
                            

                        

                    

                

            

        

    

    

	





			



      



                        

        

            

                

                    

                        

                            

                                

                            

                                

                                     
                                    Romania

                            

                        

                    

                    

                        

                            

                    

                

            

        

        

            

                

                    

                            
                            

                        

                          

                        

                    

                            
                            

                        

                          

                        

                    

                            
    
                                

                            

                        

                          

                        

                    

                            
                            

                        

                          

                        

                    

                            
                            

                                    

                                        Social Media

                                    

	

		

			
				
				
				
				
				

	





                            

                        

                          

                        

                    

            

        

        

            

                

                    

                        © HellermannTyton 2026 (v4.310.2)
                        
                         | 
                        
                            Actualizare:
                            21/06/2026
                         | 
                            
                                Setări de confidențialitate
                        
                        

                

            

        

    



  

  





                        


		
	


    

    



		
				Distribuitori locali
				
			
		
			Contact