10/11/2024

CCE with 1 x LC DX PC Adaptor
Nr. articol 857-01444 | CCE-A11121LX1/GY Detalii

  • 1 x LC/PC Duplex Adaptor
  • Fibre Management for 4 x 3A splices
  • Integral positive fibre management and storage capacity
  • 6 inbound/outbound access points
  • Through the wall capability
  • Loop through facility
  • Tamper-proof fitting - captive screw and nut
  • IP55 Rated
arată mai mult

Solicitați acum oferta dumneavoastră individuală

Application The Customer Connection Enclosure (CCE) has been designed to be used as an external building entry point. The closure can be wall mounted providing a fibre termination and external network test point. The CCE has been designed to be the same size as a 'Brick Blow-Out Cover' to cover any unslightly damage caused by drilling.
Adapter Capacity 2
Cable ∅ max 8.5mm
Cable ∅ min 2.5mm
Colour Grey (GY)
Connector Colour Blue (BU)
Connector Type LC
Content 1 x LC/PC Duplex Adaptor
Cable Entry Kit 2 x 6.0 - 8.5mm/1 x 2.5 - 6.5mm
Mechanical Fixing Kit
Wall Mounting Kit
Laser Label
Installed Adapters 1
Material Acrylonitrile Butadiene Styrene, UV-stabilised (ABSUV)
PART DESCRIPTION CCE-A11121LX1/GY
Pack Cont. 20pcs.
Package Content packed in EA
Pigtail Cable Capacity 0
Product Family Fibre Optic External Enclosure
Product Group Customer Connection Enclosure
Short Description CCE with 1 x LC DX PC Adaptor
Splice Capacity 4
Technical Description The Customer Connection Enclosure (CCE) is supplied with 1 x LC/PC Duplex Adaptor. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre. The closure has 6 entry/exit ports at the bottom of the closure and is supplied with 3 cable entry seals 2 x 6.0-8.5mm and 1 x 2.5 - 6.5mm. A loop through facility allows for single fibre elements to be removed and spliced whilst the remaining fibres can be fed on to the next connection point. A single port in the rear of the closure allows for fibre to be passed through the wall into the customer premises. Mechanical fixing is provided to secure all incoming/outgoing cables/blown fibre ducts and to provide strain relief where necessary. Internal positive fibre management and fibre retention clips maintain a minimum 30mm bend radius throughout for up to a maximum of 50m of 1.1mm diameter cable.
Type CCE-A11121LX1/GY
Variant Outdoor FTTx Enclosures
Depth (D) 37mm
Height (H) 263mm
Width (W) 130mm
Country of Origin GB
GTIN-13 / EAN 5022660162619
ETIM 7.0 Key EC000000
ETIM 8.0 Key EC000000
ETIM 9.0 Key EC000000
UNSPSC Key 43223338

Solicitați acum oferta dumneavoastră individuală