Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
11/10/2025

Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Моля обърнете внимание:  Търсената от вас комбинация от термини не връща съответстващи резултати.  По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

1 931 продукти
Нулиране на всички
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
Bundling Clip for round holes 6.5 mm.
Сравнете
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
TC2FT6LG-PA66HIRHS-NA 151-00020
Сравнете
Добавяне към списъка с наблюдавани
10000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00020
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Сравнете
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC12E-PA66HS-BK 148-00200
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC12E-PA66HS-BK 148-00200
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Fixing tie for edge, ⌀3.0-42.0mm, black, 1000pcs.
EdgeClip T50ROSEC1-3RO90, offset 3 mm and rotatable 90°.
Сравнете
Fixing tie for edge, ⌀3.0-42.0mm, black, 1000pcs.
T50ROSEC1-3RO90SO3-PA66HS/PA66HIRHS-BK 156-04014
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50ROSEC1-3RO90SO3-PA66HS/PA66HIRHS-BK 156-04014
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing ties with arrowhead, with disc, for round holes, sealed.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSFT6.5S-16-2MD-PA66HS/PA66HIRHS-BK 155-42002
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSSFT6.5S-16-2MD-PA66HS/PA66HIRHS-BK 155-42002
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Сравнете
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 260x7.0mm, ⌀10.0-70.0mm, 57N, black, 50pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Сравнете
Releasable cable tie, 260x7.0mm, ⌀10.0-70.0mm, 57N, black, 50pcs.
SRT2607-TPU-BK 115-07269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SRT2607-TPU-BK 115-07269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀1.0-35.0mm, black, 1000pcs.
The T50SSBS50T-E allows very precise routing of cable bundles.
Сравнете
Fixing tie for stud, ⌀1.0-35.0mm, black, 1000pcs.
T50SSBS6OT-E-PA66HS-BK 157-00083
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SSBS6OT-E-PA66HS-BK 157-00083
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
T50SOSSFT6.5E-PA66HS-BK 126-03102
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSSFT6.5E-PA66HS-BK 126-03102
Fixing tie for hole (round), outside serrated, ⌀4-20mm, beige, 9000pcs.
One piece fixing tie with arrowhead, outside serrated.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4-20mm, beige, 9000pcs.
PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183
Сравнете
Добавяне към списъка с наблюдавани
9000 pcs.
Beige (BGE) PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
1-piece fixing tie with arrowhead for round holes sealed.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50XROSSFT6.5-E-MDL-PA66HS-BK 156-00379
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50XROSSFT6.5-E-MDL-PA66HS-BK 156-00379
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
Сравнете
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
T60SOSSFT70x120-E-MD-PA66HS-BK 126-00079
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T60SOSSFT70x120-E-MD-PA66HS-BK 126-00079
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, grey, 1000pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, grey, 1000pcs.
T50SSL5-PA46-GY 111-85395
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Grey (GY) T50SSL5-PA46-GY 111-85395
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
T50SOSFT6D10E-PA46-GY 157-00028
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50SOSFT6D10E-PA46-GY 157-00028
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, black, 500pcs.
1-piece fixing tie with fir tree for a round hole.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, black, 500pcs.
T50SOSFT6D10E-PA66HS-BK 157-00045
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSFT6D10E-PA66HS-BK 157-00045
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Сравнете
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC10-14-PA66HS/PA66HIRHS-BK 156-00134
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SVCOC10-14-PA66HS/PA66HIRHS-BK 156-00134
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Сравнете
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00136
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00136
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 300pcs.
Cable ties with various weld stud fixing methods.
Сравнете
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 300pcs.
T50RSB5-PA66HS/POM-BK 150-10141
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) T50RSB5-PA66HS/POM-BK 150-10141
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
Сравнете
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Сравнете
Добавяне към списъка с наблюдавани
90 pcs.
Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
Сравнете
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
CCOVAL2-PA66HIRHSUV-BK 151-01108
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL2-PA66HIRHSUV-BK 151-01108
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
Double-compression design can accommodate up to 2 wires or cables of varying sizes.
Сравнете
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
MSC2-SS304-ML 151-02320
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Metal (ML) MSC2-SS304-ML 151-02320
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Сравнете
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC14-PA66HIRHS-BK 151-03404
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Bundling clip for edge, L=46.5mm, black, 500pcs.
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Сравнете
Bundling clip for edge, L=46.5mm, black, 500pcs.
EC17-PA66HIRHS-BK 151-03403
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC17-PA66HIRHS-BK 151-03403
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
Oval fir tree firmly secures clip to mounting surface.
Сравнете
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Fixing tie for edge, ⌀1.5-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Сравнете
Fixing tie for edge, ⌀1.5-35.0mm, black, 500pcs.
T50SVCEC1-3-PA66HS/PA66HIRHS-BK 156-01584
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SVCEC1-3-PA66HS/PA66HIRHS-BK 156-01584
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC13E-PA66HS-BK 126-00000
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC13E-PA66HS-BK 126-00000
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079
Fixing tie for hole (round), inside serrated, ⌀4.0-22.0mm, black, 500pcs.
2-piece fixing tie with fir tree for fixing hole 4.5-5.0 mm.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀4.0-22.0mm, black, 500pcs.
T18RFT5-PA66HS/PA66HIRHS-BK 156-01225
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T18RFT5-PA66HS/PA66HIRHS-BK 156-01225
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, grey, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, grey, 500pcs.
T30RFT5-PA46-GY 156-01316
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T30RFT5-PA46-GY 156-01316
Fixing tie for hole (round), inside serrated, ⌀1.0-30.0mm, black, 500pcs.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.0-30.0mm, black, 500pcs.
T50SFT6LG1SD-PA66HS/PA66HIRHS-BK 156-00154
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SFT6LG1SD-PA66HS/PA66HIRHS-BK 156-00154
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
Staggered fir tree branch design provides low insertion forces and high extraction forces.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Two-piece assembly allows mount to slide along strap, ensuring proper orientation.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSFT6.5 16-3MD-PA66HS/PA66HIRHS-BK 150-37799
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSSFT6.5 16-3MD-PA66HS/PA66HIRHS-BK 150-37799
Fixing tie for hole (round), outside serrated, ⌀5.0-45.0mm, black, 500pcs.
Two-piece assembly allows mount to slide along strap, ensuring proper orientation.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀5.0-45.0mm, black, 500pcs.
T50ROSSFT6.5-16-3-PA66HS/PA66HIRHS-BK 150-37791
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSSFT6.5-16-3-PA66HS/PA66HIRHS-BK 150-37791
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50RSFT6.5D18-PA66HS/PA66HIRHS-BK 150-37691
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50RSFT6.5D18-PA66HS/PA66HIRHS-BK 150-37691
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Head allows for a 0.2
Сравнете
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
Сравнете
Cable tie mount, T=0.7 - 8.0mm, ⌀4.5 - 5.0 mm, black, 5000pcs.
ATSFT5LG-PA66HIRHS-BK 102-67050
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) ATSFT5LG-PA66HIRHS-BK 102-67050
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Сравнете
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.
DCT11-PA66HIRHSUV-BK 115-31100
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) DCT11-PA66HIRHSUV-BK 115-31100
Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 500pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Сравнете
Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 500pcs.
DCT9-PA66HIRHSUV-BK 115-00034
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DCT9-PA66HIRHSUV-BK 115-00034
Fixing tie for hole (round)/for hole (hex), outside serrated, ⌀1.5-35.0mm, natural, 500pcs.
1-piece fixing ties with arrowhead, with disc, for round holes, sealed.
Сравнете
Fixing tie for hole (round)/for hole (hex), outside serrated, ⌀1.5-35.0mm, natural, 500pcs.
T50SOSSFT6.5E-MS-MD-PA66HS-NA 126-00065
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) T50SOSSFT6.5E-MS-MD-PA66HS-NA 126-00065
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
Fixing bracket for an oval hole with a seal for protection against e.g. dust and splash water.
Сравнете
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
T60SOSSFT62x122-E-MD-PA66HS-BK 126-00080
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T60SOSSFT62x122-E-MD-PA66HS-BK 126-00080
Fixing tie for hole (oval), inside serrated, ⌀1.5-45.0mm, grey, 1000pcs.
1-Piece Fixing Tie for round holes with wings.
Сравнете
Fixing tie for hole (oval), inside serrated, ⌀1.5-45.0mm, grey, 1000pcs.
T80RFT6X12-PA46-GY 150-48397
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Grey (GY) T80RFT6X12-PA46-GY 150-48397
Fixing tie for hole (round), inside serrated, ⌀6.0-50.0mm, black, 1000pcs.
Arrowhead mount cable tie features an extended pawl to release the tie for bundle maintenance.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀6.0-50.0mm, black, 1000pcs.
RT50SFK-PA66-BK 115-06960
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) RT50SFK-PA66-BK 115-06960
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.
Pipe Clip T30ROC2A for post-installation of additional cables for preassembled cable looms.
Сравнете
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.
T30ROC2A-PA66HS/PA66HIRHS-BK 156-00013
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T30ROC2A-PA66HS/PA66HIRHS-BK 156-00013
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Сравнете
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVC6.5-PA66HS/PA66HIRHS-BK 156-00155
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SVC6.5-PA66HS/PA66HIRHS-BK 156-00155
Fixing tie for stud, outside serrated, ⌀1.5-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Сравнете
Fixing tie for stud, outside serrated, ⌀1.5-45.0mm, black, 500pcs.
T50ROSSB5-PA66HS/POM-BK 150-10149
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSSB5-PA66HS/POM-BK 150-10149
Connector clip for hole (round), black, 500pcs.
Connector Clip for Connectors with AMP connection, with fir tree for round holes.
Сравнете
Connector clip for hole (round), black, 500pcs.
FT6LG-AMP-PA66HIRHS-BK 155-03800
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) FT6LG-AMP-PA66HIRHS-BK 155-03800
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CCOVAL-PA66HIRHSUV-BK 151-00925
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL-PA66HIRHSUV-BK 151-00925
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
Connector clip designed to meet USCAR EWCAP -005-11 clip slot specifications.
Сравнете
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
CCOVAL6-PA66HIRHSUV-BK 151-01033
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) CCOVAL6-PA66HIRHSUV-BK 151-01033
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 100pcs.
Double-compression design can accommodate up to 2 wires or cables of varying sizes.
Сравнете
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 100pcs.
MSC2-SS304-ML 151-00982
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) MSC2-SS304-ML 151-00982
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Сравнете
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC15-PA66HIRHS-BK 151-03401
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC15-PA66HIRHS-BK 151-03401
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Сравнете
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
TC5FT6S-PA66HIRHS-BK 150-95500
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) TC5FT6S-PA66HIRHS-BK 150-95500
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Сравнете
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
TC4FT6LG-PA66HIRHS-BK 151-00215
Сравнете
Добавяне към списъка с наблюдавани
10000 pcs.
Black (BK) TC4FT6LG-PA66HIRHS-BK 151-00215
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, grey, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, grey, 500pcs.
T50RFT6-PA46-GY 156-01693
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50RFT6-PA46-GY 156-01693
Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey, 500pcs.
2-piece Fixing Tie for round holes made from PA46.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey, 500pcs.
T50ROSFT6SD-PA46-GY 156-00085
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50ROSFT6SD-PA46-GY 156-00085
Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige/grey, 500Bag
2-piece Fixing tie for round holes made from PEEK and PA46.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige/grey, 500Bag
PT2AFT6LG-PEEK/PA46-BGE/GY 156-01336
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Beige (BGE), Grey (GY) PT2AFT6LG-PEEK/PA46-BGE/GY 156-01336
Fixing tie for hole (round), inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T30RFT7-PA66HS-BK 156-00057
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T30RFT7-PA66HS-BK 156-00057
Fixing tie for hole (round), inside serrated, ⌀1.5-50.0mm, brown, 500pcs.
Friction tab inside the fir tree allows the tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.5-50.0mm, brown, 500pcs.
T50RFT7HD-PA46-BN 156-00457
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Brown (BN) T50RFT7HD-PA46-BN 156-00457
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing tie for round holes 9.7-10.0 mm.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSFT10-PA66HS-BK 156-00120
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT10-PA66HS-BK 156-00120
Fixing tie for hole (round), outside serrated, ⌀2.0-45.0mm, black, 500pcs.
2-piece fixing tie for round holes with arrow head and seal.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-45.0mm, black, 500pcs.
T50ROSSFT6.5-D16-2 MD-PA66HS/PA66HIRHS-BK 150-93100
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSSFT6.5-D16-2 MD-PA66HS/PA66HIRHS-BK 150-93100
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Fixing tie for stud fixation and for multipile routing.
Сравнете
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
The mount’s rounded tip allows for a smoother surface in case of contact with surrounding components or hands.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSKSFT5.4E-PA66HS-BK 126-00075
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSKSFT5.4E-PA66HS-BK 126-00075
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, green, 500pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, green, 500pcs.
T50SOSSFT6.5E-MDL-PA66HS-GN 126-03100
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Green (GN) T50SOSSFT6.5E-MDL-PA66HS-GN 126-03100
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 3500pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 3500pcs.
T50SOSSFT6.5E-MDL-PA66HS-BK 156-00264
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSSFT6.5E-MDL-PA66HS-BK 156-00264
Fixing tie for hole (round), inside serrated, ⌀7.0-45.0mm, black, 500pcs.
T80RSFT - The 'tab' on the head of the tie makes it easy to locate and lift the head for assembly.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀7.0-45.0mm, black, 500pcs.
T80RSFT-PA66HS-BK 150-15493
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T80RSFT-PA66HS-BK 150-15493
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
1-piece fixing tie with fir tree for a round hole.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
T50SOSFT8E-PA66HS-BK 157-00072
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SOSFT8E-PA66HS-BK 157-00072
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5 Srew Fixing Mounts with curved design
Сравнете
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Сравнете
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A-PEEK-BGE 118-00032
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Beige (BGE) PT2A-PEEK-BGE 118-00032
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Mount can be used in a wide variety of applications where 5mm weld studs or 5mm ISO bolts.
Сравнете
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T50SSBS5OT-E-PA66HS-BK 155-30602
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SSBS5OT-E-PA66HS-BK 155-30602
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Arrowhead mount cable tie with protective disc for round holes.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSKSFT6.5S2-E-PA66HS-BK 126-00086
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSKSFT6.5S2-E-PA66HS-BK 126-00086
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 5000pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 5000pcs.
T50SOSFT6E1-PA66HIRHS-BK 157-00033
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) T50SOSFT6E1-PA66HIRHS-BK 157-00033
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1500pcs.
1-piece fixing tie with fir tree for a round hole.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1500pcs.
T50SOSFT6E2-PA66HS-BK 157-00085
Сравнете
Добавяне към списъка с наблюдавани
1500 pcs.
Black (BK) T50SOSFT6E2-PA66HS-BK 157-00085
Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 500pcs.
Push-mount rotating edge clip provides flexible routing of cable bundles.
Сравнете
Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 500pcs.
CBT30MR-PA66HS/POM-BK 156-00049
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CBT30MR-PA66HS/POM-BK 156-00049
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black/grey, 500pcs.
2-Piece Fixing Tie for round holes with fir tree and disc.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black/grey, 500pcs.
T50RFT5-PA66HS/PA66-BK/GY 150-55941
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK), Grey (GY) T50RFT5-PA66HS/PA66-BK/GY 150-55941
Fixing tie for hole (round), outside serrated, ⌀1.6-35.0mm, black, 500pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.6-35.0mm, black, 500pcs.
T50SOSFT5SD-PA66HS/PA66HIRHS-BK 156-00432
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSFT5SD-PA66HS/PA66HIRHS-BK 156-00432
Fixing tie for hole (round), inside serrated, ⌀3.0-19.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀3.0-19.0mm, black, 500pcs.
T50RDHFT6-PA66HS/PA66HIRHS-BK 150-77936
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50RDHFT6-PA66HS/PA66HIRHS-BK 150-77936
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Fixing tie for round holes with a hole size of 6.5 up to 7.0 mm and for a panel thickness of 0.8 mm - 6.0 mm.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSFT6LG-PA66HS/PA66HIRHS-BK 150-31099
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6LG-PA66HS/PA66HIRHS-BK 150-31099
Fixing tie for hole (round), inside serrated, ⌀5.0-85.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀5.0-85.0mm, black, 500pcs.
T50IFT7-PA66HS-BK 150-00700
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50IFT7-PA66HS-BK 150-00700
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc and flat arrow head.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSKSFT6.5E-PA66HS-BK 126-00081
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSKSFT6.5E-PA66HS-BK 126-00081
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, natural/grey, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, natural/grey, 500pcs.
T30RFT5-PA46-NA/GY 150-55948
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA), Grey (GY) T30RFT5-PA46-NA/GY 150-55948
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50RFT5-PA66HS/PA66HIRHS-BK 156-00025
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50RFT5-PA66HS/PA66HIRHS-BK 156-00025
Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, black, 500pcs.
Fixing tie for round holes.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, black, 500pcs.
T30RFT6SD-PA66HS/PA66HIRHS-BK 150-52690
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T30RFT6SD-PA66HS/PA66HIRHS-BK 150-52690
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSFT6-PA66HS/PA66HIRHS-BK 156-00076
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6-PA66HS/PA66HIRHS-BK 156-00076
Fixing tie for hole (round), inside serrated, ⌀5.0-75.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀5.0-75.0mm, black, 500pcs.
T80IFT6LG-PA66HS/PA66HIRHS-BK 150-31096
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T80IFT6LG-PA66HS/PA66HIRHS-BK 150-31096

Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 05/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.288.1) | Актуализиране: 05/10/2025 | Настройките за поверителност
Дистрибутори Контакт