Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
21/08/2025

Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Моля обърнете внимание:  Търсената от вас комбинация от термини не връща съответстващи резултати.  По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

1 877 продукти
Нулиране на всички
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.
Сравнете
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62x122HR-PA46-GY 156-00446
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50RFT62x122HR-PA46-GY 156-00446
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03334
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03334
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03364
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03364
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Сравнете
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Сравнете
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Eliminates the need for multiple sizes of fixed diameter clamps.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Secures with a single screw, providing quick installation.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
Secures with a single screw, providing quick installation.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
Simple to install with a screw or rivet.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Сравнете
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
EC33-PA66HIRHS-BK 151-00192
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192
Cable tie mount for adhesive use, Wmax=4.8mm, black, 100pcs.
PMB5 paste adhesive mount for fixing with paste / liquid adhesive.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, black, 100pcs.
PMB5-PA66HS-BK 151-02255
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) PMB5-PA66HS-BK 151-02255
Cable tie mount for adhesive use, Wmax=4.7mm, black, 100pcs.
PMB3 paste adhesive mount for fixing with paste/liquid adhesive.
Сравнете
Cable tie mount for adhesive use, Wmax=4.7mm, black, 100pcs.
PMB3-PA666V0-BK 151-02575
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) PMB3-PA666V0-BK 151-02575
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Releasable cable tie, 260x11.0mm, ⌀65.0mm, 123N, black, 50pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Сравнете
Releasable cable tie, 260x11.0mm, ⌀65.0mm, 123N, black, 50pcs.
SRT26011-TPU-BK 115-11269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pack
Black (BK) SRT26011-TPU-BK 115-11269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 50pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Сравнете
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 50pcs.
SRT34011-TPU-BK 115-11349
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pack
Black (BK) SRT34011-TPU-BK 115-11349
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 10pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Сравнете
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 10pcs.
SRT58028-TPU-BK 115-28589
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
10 pack
Black (BK) SRT58028-TPU-BK 115-28589
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Сравнете
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.
DCT11-PA66HIRHSUV-BK 115-31101
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) DCT11-PA66HIRHSUV-BK 115-31101
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Сравнете
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
DCT11-PA66HIRHSUV-BK 115-00144
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) DCT11-PA66HIRHSUV-BK 115-00144
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Сравнете
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M8-PA66HSW-BK 157-00039
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Сравнете
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8-PA66HSW-GY 157-00066
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Сравнете
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
T50ML-PA66-NA 113-05419
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) T50ML-PA66-NA 113-05419
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Сравнете
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
T50MS-PA66-NA 113-05819
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) T50MS-PA66-NA 113-05819
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
The low-profile push mount design provides an overall shortened length, which assists in limiting protrusion on the opposing side of application surfaces.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
T50SOSKSFT5S-E-PA66HS-BK 126-00099
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SOSKSFT5S-E-PA66HS-BK 126-00099
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Сравнете
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), black, 1000pcs.
For a secure fixation simply push the connector by hand on our Connector Clip YCCFT62x122.
Сравнете
Connector clip for hole (oval), black, 1000pcs.
YCCFT62x122-PA66HIRHS-BK 151-00180
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) YCCFT62x122-PA66HIRHS-BK 151-00180
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Сравнете
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CC11-PA66HIRHSUV-BK 151-01144
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Connector clip, EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Сравнете
Connector clip, EWCAP-005-11, black, 5000pcs.
CC16-PA66HIRHSUV-BK 151-01297
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CC16-PA66HIRHSUV-BK 151-01297
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Сравнете
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
CCEC6-PA66HIRHS-BK 150-92600
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, natural, 500pcs.
1-piece fixing tie with arrowhead for round holes sealed.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, natural, 500pcs.
T50SOSSFT6.5E-MDL-PA66HS-NA 156-00271
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) T50SOSSFT6.5E-MDL-PA66HS-NA 156-00271
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, natural, 1000pcs.
Fixing tie with stand-off for round holes and with arrowhead.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, natural, 1000pcs.
T50SAH-PA66HS-NA 155-41102
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) T50SAH-PA66HS-NA 155-41102
Fixing tie for hole (oval), inside serrated, ⌀1.5-45.0mm, black, 1000pcs.
1-Piece Fixing Tie for round holes with wings.
Сравнете
Fixing tie for hole (oval), inside serrated, ⌀1.5-45.0mm, black, 1000pcs.
T80RFT6X12-PA66-BK 150-48396
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T80RFT6X12-PA66-BK 150-48396
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 4000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 4000pcs.
T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Сравнете
Добавяне към списъка с наблюдавани
4000 pcs.
Grey (GY) T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, grey, 500pcs.
T50SOSFT6D10E-PA46-GY 157-00028
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50SOSFT6D10E-PA46-GY 157-00028
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
T50SOSFT8E-PA46-GY 157-00115
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Grey (GY) T50SOSFT8E-PA46-GY 157-00115
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Сравнете
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Сравнете
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Fixing tie for stud, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
2-piece fixing tie for stud bolts 5mm.
Сравнете
Fixing tie for stud, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
T50SOSSBS5-PA66HS/PA66-BK 156-00079
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSSBS5-PA66HS/PA66-BK 156-00079
Fixing tie for stud, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
Two-piece cable tie with weld stud fastener is ideal for installation onto the stud prior to attaching the cable.
Сравнете
Fixing tie for stud, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SOSSB5-PA66HS/POM-BK 156-00080
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSSB5-PA66HS/POM-BK 156-00080
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Сравнете
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
2-piece Fixing tie for round holes made from PA46.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
T50RFT8GSD-PA46-GY 156-00235
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Grey (GY) T50RFT8GSD-PA46-GY 156-00235
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
WSSFT9A-PA66HIRHSUV-BK 156-00068
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSSFT9A-PA66HIRHSUV-BK 156-00068
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
WSRFT9B-PA66HIRHSUV-BK 156-00074
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSRFT9B-PA66HIRHSUV-BK 156-00074
Fixing tie for hole (round), inside serrated, ⌀5.0-81.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀5.0-81.0mm, black, 500pcs.
T80ISFT6.5-PA66HS-BK 156-01699
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T80ISFT6.5-PA66HS-BK 156-01699
Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.
2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.
PT2AP2SFT6.5-PEEK-BGE 156-01091
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Beige (BGE) PT2AP2SFT6.5-PEEK-BGE 156-01091
Fixing tie for hole (round), outside serrated, ⌀5.0-15.0mm, black, 500pcs.
T50SOSDSFT6.5 for parallel routing.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀5.0-15.0mm, black, 500pcs.
T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Сравнете
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
Cable Tie Mounts NY Series.
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Natural (NA) NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.6mm, ⌀2.9 mm, M3 Screw, natural, 100pcs.
Screw fixing mount MB1.
Сравнете
Cable tie mount for screw fixation, Wmax=2.6mm, ⌀2.9 mm, M3 Screw, natural, 100pcs.
MB1-PA66-NA 151-28119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) MB1-PA66-NA 151-28119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
The 1-piece design of Aerial Support Ties reduces installation time.
Сравнете
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
TAS120L-PA66HIRHSUV-BK 111-01672
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) TAS120L-PA66HIRHSUV-BK 111-01672
Cable tie outside serrated, 250.0x4.65mm, ⌀4.0-65.0mm, beige, 100pcs.
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Сравнете
Cable tie outside serrated, 250.0x4.65mm, ⌀4.0-65.0mm, beige, 100pcs.
PT3B-PEEK-BGE 118-00116
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Beige (BGE) PT3B-PEEK-BGE 118-00116
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
Extreme temperature range for excellent performance in a range of environments.
Сравнете
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
PT220-PEEK-BGE 111-01235
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Beige (BGE) PT220-PEEK-BGE 111-01235
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC12E-PA66HS-BK 148-00200
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC12E-PA66HS-BK 148-00200
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Releasable cable tie, 260x7.0mm, ⌀10.0-70.0mm, 57N, black, 50pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Сравнете
Releasable cable tie, 260x7.0mm, ⌀10.0-70.0mm, 57N, black, 50pcs.
SRT2607-TPU-BK 115-07269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pack
Black (BK) SRT2607-TPU-BK 115-07269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀1.0-35.0mm, black, 1000pcs.
The T50SSBS50T-E allows very precise routing of cable bundles.
Сравнете
Fixing tie for stud, ⌀1.0-35.0mm, black, 1000pcs.
T50SSBS6OT-E-PA66HS-BK 157-00083
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SSBS6OT-E-PA66HS-BK 157-00083
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
T50SOSSFT6.5E-PA66HS-BK 126-03102
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSSFT6.5E-PA66HS-BK 126-03102
Fixing tie for hole (round), outside serrated, ⌀4-20mm, beige, 9000pcs.
One piece fixing tie with arrowhead, outside serrated.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4-20mm, beige, 9000pcs.
PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183
Сравнете
Добавяне към списъка с наблюдавани
9000 pcs.
Beige (BGE) PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
Double-compression design can accommodate up to 2 wires or cables of varying sizes.
Сравнете
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
MSC2-SS304-ML 151-02320
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Metal (ML) MSC2-SS304-ML 151-02320
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
Сравнете
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Сравнете
Добавяне към списъка с наблюдавани
90 pcs.
Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Connector clip for hole (oval), EWCAP-005-7, black, 5000pcs.
Сравнете
Connector clip for hole (oval), EWCAP-005-7, black, 5000pcs.
CCOVAL2-PA66HIRHSUV-BK 151-01108
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL2-PA66HIRHSUV-BK 151-01108
Bundling clip for edge, L=46.5mm, black, 500pcs.
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Сравнете
Bundling clip for edge, L=46.5mm, black, 500pcs.
EC17-PA66HIRHS-BK 151-03403
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC17-PA66HIRHS-BK 151-03403
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
1-piece fixing tie with arrowhead for round holes sealed.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50XROSSFT6.5-E-MDL-PA66HS-BK 156-00379
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50XROSSFT6.5-E-MDL-PA66HS-BK 156-00379
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
Сравнете
Fixing tie for hole (oval), outside serrated, ⌀1.6-30.0mm, black, 500pcs.
T60SOSSFT70x120-E-MD-PA66HS-BK 126-00079
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T60SOSSFT70x120-E-MD-PA66HS-BK 126-00079
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, grey, 1000pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, grey, 1000pcs.
T50SSL5-PA46-GY 111-85395
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Grey (GY) T50SSL5-PA46-GY 111-85395
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 300pcs.
Cable ties with various weld stud fixing methods.
Сравнете
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 300pcs.
T50RSB5-PA66HS/POM-BK 150-10141
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) T50RSB5-PA66HS/POM-BK 150-10141
Fixing tie for edge, ⌀1.5-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Сравнете
Fixing tie for edge, ⌀1.5-35.0mm, black, 500pcs.
T50SVCEC1-3-PA66HS/PA66HIRHS-BK 156-01584
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SVCEC1-3-PA66HS/PA66HIRHS-BK 156-01584
Fixing tie for edge, ⌀3.0-42.0mm, black, 1000pcs.
EdgeClip T50ROSEC1-3RO90, offset 3 mm and rotatable 90°.
Сравнете
Fixing tie for edge, ⌀3.0-42.0mm, black, 1000pcs.
T50ROSEC1-3RO90SO3-PA66HS/PA66HIRHS-BK 156-04014
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50ROSEC1-3RO90SO3-PA66HS/PA66HIRHS-BK 156-04014
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing ties with arrowhead, with disc, for round holes, sealed.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSFT6.5S-16-2MD-PA66HS/PA66HIRHS-BK 155-42002
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSSFT6.5S-16-2MD-PA66HS/PA66HIRHS-BK 155-42002
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC13E-PA66HS-BK 126-00000
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC13E-PA66HS-BK 126-00000

Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 17/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Актуализиране: 17/08/2025 | Настройките за поверителност
Дистрибутори Контакт