Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Моля обърнете внимание: Търсената от вас комбинация от термини не връща съответстващи резултати. По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

Изглед на инженера

Sustainable

Изглед на инженера

Sustainable

Нулиране на всички

Fixing tie for hole (round), inside serrated, ⌀2.0-45.0mm, black, 500pcs.

Being a two-piece assembly allows the tie head to be located in the most convenient position.

Сравнете

T50RSFT6.5-PA66HS-BK 156-01697

Сравнете

Добавяне към списъка с наблюдавани

Being a two-piece assembly allows the tie head to be located in the most convenient position.

Сравнете

Fixing tie for hole (round), inside serrated, ⌀2.0-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50RSFT6.5-PA66HS-BK 156-01697

Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

FH Cable Tie Mounts for areas with limited space.

Сравнете

FH50-PA66-NA 151-61519

Сравнете

Добавяне към списъка с наблюдавани

FH Cable Tie Mounts for areas with limited space.

Сравнете

Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, natural, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Natural (NA) FH50-PA66-NA 151-61519

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

LKM / CL8 Cable Tie Mounts with curved design.

Сравнете

LKM-PA66-BK 151-26301

Сравнете

Добавяне към списъка с наблюдавани

LKM / CL8 Cable Tie Mounts with curved design.

Сравнете

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) LKM-PA66-BK 151-26301

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

KR8G5 Srew Fixing Mounts with curved design

Сравнете

KR6G5-PA66-BK 151-24600

Сравнете

Добавяне към списъка с наблюдавани

KR8G5 Srew Fixing Mounts with curved design

Сравнете

Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) KR6G5-PA66-BK 151-24600

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

KR6G5-E/TFE-BU 151-00653

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Blue (BU) KR6G5-E/TFE-BU 151-00653

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=8.3mm, ⌀6.5 mm, M6 Screw, blue, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

KR8G5-E/TFE-BU 151-00654

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=8.3mm, ⌀6.5 mm, M6 Screw, blue, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Blue (BU) KR8G5-E/TFE-BU 151-00654

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM0-PA66-BK 151-30300

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) CTM0-PA66-BK 151-30300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM1-PA66-BK 151-30400

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) CTM1-PA66-BK 151-30400

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM2-PA66-BK 151-30500

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) CTM2-PA66-BK 151-30500

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM2-PA66-WH 151-30504

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, white, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

White (WH) CTM2-PA66-WH 151-30504

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀4.7 mm, ⌀4.8 mm, #10 (M5) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

HDM19-PA66HIRHSUV-BK 151-00134

Сравнете

Добавяне към списъка с наблюдавани

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀4.7 mm, ⌀4.8 mm, #10 (M5) Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) HDM19-PA66HIRHSUV-BK 151-00134

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

HDM321-PA66HIRHSUV-BK 151-07100

Сравнете

Добавяне към списъка с наблюдавани

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) HDM321-PA66HIRHSUV-BK 151-07100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, ⌀5.0 mm, black, 2000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic Nuts KM5 and KM6.

Сравнете

KM5-PA66HIRHS-BK 150-51910

Сравнете

Добавяне към списъка с наблюдавани

Plastic Nuts KM5 and KM6.

Сравнете

Cable tie mount for screw fixation, ⌀5.0 mm, black, 2000pcs.

Сравнете

Добавяне към списъка с наблюдавани

2000 pcs.

Black (BK) KM5-PA66HIRHS-BK 150-51910

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.

Positions bundles off cross members and frame rails to prevent abrasion and chafing.

Сравнете

SAM83-PA66HIRHS-GY 151-29600

Сравнете

Добавяне към списъка с наблюдавани

Positions bundles off cross members and frame rails to prevent abrasion and chafing.

Сравнете

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Grey (GY) SAM83-PA66HIRHS-GY 151-29600

Cable tie mount for screw fixation, Wmax=9mm, ⌀8.0 mm, M8 Screw, black, 500pcs.

S3SB15CBM8 and S3CBM8.

Сравнете

S3CBM8-PA6GF30-BK 151-01040

Сравнете

Добавяне към списъка с наблюдавани

S3SB15CBM8 and S3CBM8.

Сравнете

Cable tie mount for screw fixation, Wmax=9mm, ⌀8.0 mm, M8 Screw, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) S3CBM8-PA6GF30-BK 151-01040

Fixing tie, inside serrated, ⌀1.5-18.0mm, black, 500pcs.

Сравнете

T30SKC0.8-PA66-BK 111-86010

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie, inside serrated, ⌀1.5-18.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T30SKC0.8-PA66-BK 111-86010

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 6000pcs.

Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole

Сравнете

T50SOSEC34E-PA66W-BK 126-00375

Сравнете

Добавяне към списъка с наблюдавани

Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole

Сравнете

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 6000pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50SOSEC34E-PA66W-BK 126-00375

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.

Сравнете

T50SOSEC34E-PA66W-BK 126-00427

Сравнете

Добавяне към списъка с наблюдавани

1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.

Сравнете

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50SOSEC34E-PA66W-BK 126-00427

Fixing tie for edge, inside serrated, ⌀1.6-15.0mm, black, 500pcs.

1-Piece Fixing Tie with EdgeClip for diagonal cable routing parallel to the edge.

Сравнете

T40XEC5SP-E-PA66HS-BK 133-00059

Сравнете

Добавяне към списъка с наблюдавани

1-Piece Fixing Tie with EdgeClip for diagonal cable routing parallel to the edge.

Сравнете

Fixing tie for edge, inside serrated, ⌀1.6-15.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T40XEC5SP-E-PA66HS-BK 133-00059

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.

2-piece fixing tie with edge clip 3-6mm, top fixing.

Сравнете

T50SOSEC20-E-PA66HS-BK 126-00235

Сравнете

Добавяне към списъка с наблюдавани

2-piece fixing tie with edge clip 3-6mm, top fixing.

Сравнете

Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SOSEC20-E-PA66HS-BK 126-00235

Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.

2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.

Сравнете

T30REC4A-PA66HS/PA66HIRHS-BK 150-76090

Сравнете

Добавяне към списъка с наблюдавани

2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.

Сравнете

Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T30REC4A-PA66HS/PA66HIRHS-BK 150-76090

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.

Сравнете

T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903

Сравнете

Добавяне към списъка с наблюдавани

Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.

Сравнете

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

2-piece fixing tie with EdgeClip for side cable routing.

Сравнете

T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581

Сравнете

Добавяне към списъка с наблюдавани

2-piece fixing tie with EdgeClip for side cable routing.

Сравнете

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

2-piece fixing tie with edge clip 1-3mm, side fixing.

Сравнете

T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010

Сравнете

Добавяне към списъка с наблюдавани

2-piece fixing tie with edge clip 1-3mm, side fixing.

Сравнете

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Сравнете

T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Fixing tie for edge, outside serrated

Сравнете

T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006

Сравнете

Добавяне към списъка с наблюдавани

Fixing tie for edge, outside serrated

Сравнете

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006

Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.

Сравнете

SSPC4-SS316L-ML 151-00837

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Metal (ML) SSPC4-SS316L-ML 151-00837

Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.

Сравнете

SSPC5-SS316L-ML 151-00838

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Metal (ML) SSPC5-SS316L-ML 151-00838

Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.

Сравнете

SSPC6-SS316L-ML 151-00839

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Metal (ML) SSPC6-SS316L-ML 151-00839

Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm

The SC6.6 for solar cables is ideal for quick installation and easy maintenance.

Сравнете

SC6.6-PA66HIRHSUV-BK 151-00927

Сравнете

Добавяне към списъка с наблюдавани

The SC6.6 for solar cables is ideal for quick installation and easy maintenance.

Сравнете

Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927

Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Klam-Klips KK1 - 4.

Сравнете

KK2-PA6HIR-BK 234-10200

Сравнете

Добавяне към списъка с наблюдавани

Klam-Klips KK1 - 4.

Сравнете

Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) KK2-PA6HIR-BK 234-10200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Klam-Klips KK1 - 4.

Сравнете

KK4-PA6HIR-BK 234-10400

Сравнете

Добавяне към списъка с наблюдавани

Klam-Klips KK1 - 4.

Сравнете

Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) KK4-PA6HIR-BK 234-10400

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU11-AL-NA 211-10110

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU12-AL-NA 211-10120

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU12-AL-NA 211-10120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU13-AL-NA 211-10130

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU13-AL-NA 211-10130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU17C-AL/CR-BK 211-15170

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU19C-AL/CR-BK 211-15190

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Сравнете

ALU23C-AL/CR-BK 211-15230

Сравнете

Добавяне към списъка с наблюдавани

ALU23C P-Clamp with chloroprene insert.

Сравнете

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU25C-AL/CR-BK 211-15250

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU26C-AL/CR-BK 211-15260

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU28C-AL/CR-BK 211-15280

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU29C-AL/CR-BK 211-15290

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU30C-AL/CR-BK 211-15300

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

ALU34C-AL/CR-BK 211-15340

Сравнете

Добавяне към списъка с наблюдавани

P-Clips (Alu) with Rubber Insert for vibration resistance

Сравнете

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

ALU8-AL-NA 211-10080

Сравнете

Добавяне към списъка с наблюдавани

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Сравнете

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.

Head design contains clamping rails to provide full circumferential compression around bundles.

Сравнете

CCOVAL3-PA66HIRHSUV-BK 151-01244

Сравнете

Добавяне към списъка с наблюдавани

Head design contains clamping rails to provide full circumferential compression around bundles.

Сравнете

Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.

Сравнете

Добавяне към списъка с наблюдавани

3500 pcs.

Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244

Connector clip for hole (oval), black, 5000pcs.

Head design contains clamping rails to provide full circumferential compression around bundles.

Сравнете

CCOVAL4-PA66HIRHSUV-BK 151-01246

Сравнете

Добавяне към списъка с наблюдавани

Head design contains clamping rails to provide full circumferential compression around bundles.

Сравнете

Connector clip for hole (oval), black, 5000pcs.

Сравнете

Добавяне към списъка с наблюдавани

5000 pcs.

Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246

Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.

The slim line BC series is particularly compact and flexible.

Сравнете

BC2212-PA66HIRHS-BK 151-00017

Сравнете

Добавяне към списъка с наблюдавани

The slim line BC series is particularly compact and flexible.

Сравнете

Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) BC2212-PA66HIRHS-BK 151-00017

Bundling clip for hole (round), L=55.0mm, natural, 8000pcs.

Bundling Clip for round holes 6.5 mm.

Сравнете

TC2FT6LG-PA66HIRHS-NA 151-00828

Сравнете

Добавяне към списъка с наблюдавани

Bundling Clip for round holes 6.5 mm.

Сравнете

Bundling clip for hole (round), L=55.0mm, natural, 8000pcs.

Сравнете

Добавяне към списъка с наблюдавани

8000 pcs.

Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00828

Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.

Сравнете

WSI-PA66HIRHSUV-BK 111-12301

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.

Сравнете

Добавяне към списъка с наблюдавани

300 pcs.

Black (BK) WSI-PA66HIRHSUV-BK 111-12301

Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

FBB100M-PA66HS-BK 150-29100

Сравнете

Добавяне към списъка с наблюдавани

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) FBB100M-PA66HS-BK 150-29100

Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

FBB185M-PA66HS-BK 150-29180

Сравнете

Добавяне към списъка с наблюдавани

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Сравнете

Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) FBB185M-PA66HS-BK 150-29180

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

WSS8MM-PA66HIRHSW-BK 157-00034

Сравнете

Добавяне към списъка с наблюдавани

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Сравнете

Добавяне към списъка с наблюдавани

300 pcs.

Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

WSI8MM-PA66HIRHSUV-BK 157-00035

Сравнете

Добавяне към списъка с наблюдавани

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Сравнете

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Сравнете

Добавяне към списъка с наблюдавани

300 pcs.

Black (BK) WSI8MM-PA66HIRHSUV-BK 157-00035

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

T50SOSSBD-M6-PA66HSUV-BK 157-00038

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

T50SOSSBD-M10-PA66HSW-BK 157-00040

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

T50SOSSBU-M6-PA66HSUV-GY 157-00065

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

T50SOSSBU-M8/10 for bundles which run below the stud.

Сравнете

T50SOSSBU-M10-PA66HSW-GY 157-00067

Сравнете

Добавяне към списъка с наблюдавани

T50SOSSBU-M8/10 for bundles which run below the stud.

Сравнете

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067

Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000

Offset design positions bundles away from obstructions, heat or sources of abrasion.

Сравнете

T50ROSLPM8SMSO25-PA46-BN 157-00361

Сравнете

Добавяне към списъка с наблюдавани

Offset design positions bundles away from obstructions, heat or sources of abrasion.

Сравнете

Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000

Сравнете

Добавяне към списъка с наблюдавани

2000 pcs.

Brown (BN) T50ROSLPM8SMSO25-PA46-BN 157-00361

Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, black, 1000pcs.

Сравнете

T50SAH-PA66HS-BK 126-00163

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SAH-PA66HS-BK 126-00163

Fixing tie for hole (round), outside serrated, ⌀1.6-20.0mm, black, 100pcs.

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Сравнете

OS130-PA66W-BK 126-00060

Сравнете

Добавяне към списъка с наблюдавани

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀1.6-20.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) OS130-PA66W-BK 126-00060

Fixing tie for hole (round), ⌀1.0-27.0mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

RT18RSF-PA66V0-BK 115-00065

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for hole (round), ⌀1.0-27.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) RT18RSF-PA66V0-BK 115-00065

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Grey (GY) T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFT6SO25A-PA66HIRHS-GY 157-00119

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.

Сравнете

Добавяне към списъка с наблюдавани

3000 pcs.

Grey (GY) T50ROSFT6SO25A-PA66HIRHS-GY 157-00119

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFT8SO25A-PA66HIRHS-GY 157-00120

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Grey (GY) T50ROSFT8SO25A-PA66HIRHS-GY 157-00120

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 4000pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 4000pcs.

Сравнете

Добавяне към списъка с наблюдавани

4000 pcs.

Black (BK) T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.

Сравнете

Добавяне към списъка с наблюдавани

3000 pcs.

Black (BK) T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169

Fixing tie for hole (round), outside serrated, ⌀1.6-50.0mm, black, 500pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀1.6-50.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFT625SO-PA66HIRHSUV-BK 157-00195

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSFT625SO-PA66HIRHSUV-BK 157-00195

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197

Сравнете

Добавяне към списъка с наблюдавани

The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.

Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.

Сравнете

OS170-FT7-PA66-BK 157-00017

Сравнете

Добавяне към списъка с наблюдавани

Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.

Сравнете

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) OS170-FT7-PA66-BK 157-00017

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.

Сравнете

OS170-FT7-LH-PA66-BK 157-00019

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) OS170-FT7-LH-PA66-BK 157-00019

Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.

Сравнете

OS170-FT7-LH-PA66HSUV-BK 157-00122

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) OS170-FT7-LH-PA66HSUV-BK 157-00122

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.

2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.

Сравнете

T50SVCOC10-14-PA46-GY 156-01045

Сравнете

Добавяне към списъка с наблюдавани

2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.

Сравнете

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Grey (GY) T50SVCOC10-14-PA46-GY 156-01045

Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Сравнете

T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714

Сравнете

Добавяне към списъка с наблюдавани

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Сравнете

Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714

Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383

Сравнете

Добавяне към списъка с наблюдавани

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Сравнете

Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.

Сравнете

Добавяне към списъка с наблюдавани

1000 pcs.

Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383

Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.

Cable ties with various weld stud fixing methods.

Сравнете

T50RSB5-PA66/POM-BK 156-00742

Сравнете

Добавяне към списъка с наблюдавани

Cable ties with various weld stud fixing methods.

Сравнете

Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Black (BK) T50RSB5-PA66/POM-BK 156-00742

Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.

Cable ties with various weld stud fixing methods.

Сравнете

T50SOSSBS5-PA66HS-BK 156-01746

Сравнете

Добавяне към списъка с наблюдавани

Cable ties with various weld stud fixing methods.

Сравнете

Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.

Сравнете

Добавяне към списъка с наблюдавани

250 pcs.

Black (BK) T50SOSSBS5-PA66HS-BK 156-01746

Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.

Cable ties with various weld stud fixing methods.

Сравнете

T50SOSSBH5-PA66HS-BK 156-01744

Сравнете

Добавяне към списъка с наблюдавани

Cable ties with various weld stud fixing methods.

Сравнете

Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50SOSSBH5-PA66HS-BK 156-01744

Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.

The holding tab increases the tensile strength additionaly.

Сравнете

T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292

Сравнете

Добавяне към списъка с наблюдавани

The holding tab increases the tensile strength additionaly.

Сравнете

Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292

Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.

The holding tab increases the tensile strength additionaly.

Сравнете

T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299

Сравнете

Добавяне към списъка с наблюдавани

The holding tab increases the tensile strength additionaly.

Сравнете

Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299

Fixing tie for hole (round), outside serrated, ⌀2.0-45.0mm, black, 100pcs.

Сравнете

T50ROSFT8-PA66HS-BK 156-00360

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Fixing tie for hole (round), outside serrated, ⌀2.0-45.0mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) T50ROSFT8-PA66HS-BK 156-00360

Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.

T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.

Сравнете

T50RFT62x122HR-PA46-GY 156-00446

Сравнете

Добавяне към списъка с наблюдавани

T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.

Сравнете

Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Grey (GY) T50RFT62x122HR-PA46-GY 156-00446

Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.

Self-adhesive cable tie mount with 360° rotatable design.

Сравнете

SMB4APT-A-PA66HS/A-BK 151-03334

Сравнете

Добавяне към списъка с наблюдавани

Self-adhesive cable tie mount with 360° rotatable design.

Сравнете

Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.

Сравнете

Добавяне към списъка с наблюдавани

50 pcs.

Black (BK) SMB4APT-A-PA66HS/A-BK 151-03334

Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm

Сравнете

CL8-PA66W-BK 151-02259

Сравнете

Добавяне към списъка с наблюдавани

Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm

Сравнете

Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) CL8-PA66W-BK 151-02259

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

FH Cable Tie Mounts for areas with limited space.

Сравнете

FH18-PA66-NA 151-61119

Сравнете

Добавяне към списъка с наблюдавани

FH Cable Tie Mounts for areas with limited space.

Сравнете

Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Natural (NA) FH18-PA66-NA 151-61119

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

FH Cable Tie Mounts for areas with limited space.

Сравнете

FH30-PA66-NA 151-61319

Сравнете

Добавяне към списъка с наблюдавани

FH Cable Tie Mounts for areas with limited space.

Сравнете

Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Natural (NA) FH30-PA66-NA 151-61319

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

LKM / CL8 Cable Tie Mounts with curved design.

Сравнете

LKM-PA66-NA 151-26304

Сравнете

Добавяне към списъка с наблюдавани

LKM / CL8 Cable Tie Mounts with curved design.

Сравнете

Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) LKM-PA66-NA 151-26304

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

LKCSF1-PA66-NA 151-27219

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Natural (NA) LKCSF1-PA66-NA 151-27219

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

LKCSF1-PA66-BK 151-27202

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) LKCSF1-PA66-BK 151-27202

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM0-PA66-WH 151-30303

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

White (WH) CTM0-PA66-WH 151-30303

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM1-PA66-WH 151-30404

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

White (WH) CTM1-PA66-WH 151-30404

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM3-PA66-BK 151-30600

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) CTM3-PA66-BK 151-30600

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM3-PA66-WH 151-30605

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

White (WH) CTM3-PA66-WH 151-30605

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM4-PA66-BK 151-30700

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) CTM4-PA66-BK 151-30700

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Сравнете

CTM4-PA66-WH 151-30703

Сравнете

Добавяне към списъка с наблюдавани

Сравнете

Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

White (WH) CTM4-PA66-WH 151-30703

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

HDM312-PA66HIRHSUV-BK 151-00439

Сравнете

Добавяне към списъка с наблюдавани

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.

Сравнете

Добавяне към списъка с наблюдавани

100 pcs.

Black (BK) HDM312-PA66HIRHSUV-BK 151-00439

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

HDM320-PA66HIRHSUV-BK 151-02094

Сравнете

Добавяне към списъка с наблюдавани

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) HDM320-PA66HIRHSUV-BK 151-02094

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

HDM400-PA66HIRHSUV-BK 151-01224

Сравнете

Добавяне към списъка с наблюдавани

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) HDM400-PA66HIRHSUV-BK 151-01224

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

HDM401-PA66HIRHSUV-BK 151-07300

Сравнете

Добавяне към списъка с наблюдавани

Mount and tie combination makes it easy to service bundles in the field.

Сравнете

Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.

Сравнете

Добавяне към списъка с наблюдавани

500 pcs.

Black (BK) HDM401-PA66HIRHSUV-BK 151-07300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Pезултати за „D-Clip Series“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Дистрибутори Контакт

‹ › ×