Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Pogled inženirja

Sustainable

Pogled inženirja

Sustainable

Ponastavi vse

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU22C-AL/CR-BK 211-15220

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Primerjava

ALU23C-AL/CR-BK 211-15230

Primerjava

ALU23C P-Clamp with chloroprene insert.

Primerjava

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU24C-AL/CR-BK 211-15240

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU25C-AL/CR-BK 211-15250

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU26C-AL/CR-BK 211-15260

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU28C-AL/CR-BK 211-15280

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU29C-AL/CR-BK 211-15290

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU30C-AL/CR-BK 211-15300

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU34C-AL/CR-BK 211-15340

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU4-AL-NA 211-10040

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU4C-AL/CR-BK 211-15040

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU5-AL-NA 211-10050

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU5C-AL/CR-BK 211-15050

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU6C-AL/CR-BK 211-15060

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU7-AL-NA 211-10070

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU7C-AL/CR-BK 211-15070

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU8-AL-NA 211-10080

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU8C-AL/CR-BK 211-15080

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU9C-AL/CR-BK 211-15090

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU6-AL-NA 211-10060

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, ⌀3.2 mm, Dmax=3.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing clip TY8H1(S) - screw fix or self adhesive.

Primerjava

TY8H1-PA66-NA 151-22819

Primerjava

Fixing clip TY8H1(S) - screw fix or self adhesive.

Primerjava

Cable clip, ⌀3.2 mm, Dmax=3.0mm

Primerjava

100 pcs.

Natural (NA) TY8H1-PA66-NA 151-22819

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for screw fixation, ⌀3.1 mm

FKH25 are designed to retain flat ribbon cables.

Primerjava

FKH25-PA66HIR-BK 151-16250

Primerjava

FKH25 are designed to retain flat ribbon cables.

Primerjava

Cable clip for screw fixation, ⌀3.1 mm

Primerjava

100 pcs.

Black (BK) FKH25-PA66HIR-BK 151-16250

Cable clip for screw fixation, ⌀3.1 mm

FKH30 mounts are designed to retain flat ribbon cables.

Primerjava

FKH30-PA66HIR-BK 151-16300

Primerjava

FKH30 mounts are designed to retain flat ribbon cables.

Primerjava

Cable clip for screw fixation, ⌀3.1 mm

Primerjava

100 pcs.

Black (BK) FKH30-PA66HIR-BK 151-16300

Cable clip for screw fixation, ⌀3.1 mm

FKH50 are designed to retain flat ribbon cables.

Primerjava

FKH50-PA66HIR-BK 151-16500

Primerjava

FKH50 are designed to retain flat ribbon cables.

Primerjava

Cable clip for screw fixation, ⌀3.1 mm

Primerjava

100 pcs.

Black (BK) FKH50-PA66HIR-BK 151-16500

Cable clip for screw fixation, ⌀3.1 mm

FKH80 are designed to retain flat ribbon cables.

Primerjava

FKH80-PA66HIR-BK 151-16800

Primerjava

FKH80 are designed to retain flat ribbon cables.

Primerjava

Cable clip for screw fixation, ⌀3.1 mm

Primerjava

100 pcs.

Black (BK) FKH80-PA66HIR-BK 151-16800

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Primerjava

SRC150M8-PA6GF30-BK 156-02742

Primerjava

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Primerjava

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Primerjava

150

Black (BK) SRC150M8-PA6GF30-BK 156-02742

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable cleat trefoil formation, SS316L, for cable diameters 18mm to 23mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT023-SS316L/PO-ML 151-05001

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 18mm to 23mm, IEC61914-2021

Primerjava

1 pc.

Metal (ML) CCT023-SS316L/PO-ML 151-05001

Cable cleat trefoil formation, SS316L, for cable diameters 23mm to 28mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT028-SS316L/PO-ML 151-05002

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 23mm to 28mm, IEC61914-2021

Primerjava

1 pc.

Metal (ML) CCT028-SS316L/PO-ML 151-05002

Cable cleat trefoil formation SS316L, for cable diameters 27mm to 32mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT032-SS316L/PO-ML 151-05003

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation SS316L, for cable diameters 27mm to 32mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT032-SS316L/PO-ML 151-05003

Cable cleat trefoil formation, SS316L, for cable diameters 30mm to 35mm, IEC61914-20321

Cable cleat, trefoil

Primerjava

CCT035-SS316L/PO-ML 151-05004

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 30mm to 35mm, IEC61914-20321

Primerjava

1 Bag

Metal (ML) CCT035-SS316L/PO-ML 151-05004

Cable cleat trefoil formation, SS316L, for cable diameters 33mm to 38mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT038-SS316L/PO-ML 151-05005

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 33mm to 38mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT038-SS316L/PO-ML 151-05005

Cable cleat trefoil formation, SS316L, for cable diameters 36mm to 42mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT042-SS316L/PO-ML 151-05006

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 36mm to 42mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT042-SS316L/PO-ML 151-05006

Cable cleat trefoil formation, SS316L, for cable diameter 40mm to 46mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT046-SS316L/PO-ML 151-05007

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameter 40mm to 46mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT046-SS316L/PO-ML 151-05007

Cable cleat trefoil formation, SS316L, for cable diameters 44mm to 50mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT050-SS316L/PO-ML 151-05008

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 44mm to 50mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT050-SS316L/PO-ML 151-05008

Cable cleat trefoil formation, SS316L, for cable diameters 51mm to 58mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT058-SS316L/PO-ML 151-05009

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 51mm to 58mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT058-SS316L/PO-ML 151-05009

Cable cleat trefoil formation, SS316L, for cable diameters 55mm to 62mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT062-SS316L/PO-ML 151-05010

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 55mm to 62mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT062-SS316L/PO-ML 151-05010

Cable cleat trefoil formation, SS316L, for cable diameters 59mm to 66mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT066-SS316L/PO-ML 151-05011

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 59mm to 66mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT066-SS316L/PO-ML 151-05011

Cable cleat trefoil formation, SS316L, for cable diameters 63mm to 70mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT070-SS316L/PO-ML 151-05012

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 63mm to 70mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT070-SS316L/PO-ML 151-05012

Cable cleat trefoil formation, SS316L, for cable diameters 67mm to 74mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT074-SS316L/PO-ML 151-05013

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 67mm to 74mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT074-SS316L/PO-ML 151-05013

Cable cleat trefoil formation, SS316L, for cable diameters 71mm to 78mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT078-SS316L/PO-ML 151-05014

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 71mm to 78mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT078-SS316L/PO-ML 151-05014

Cable cleat trefoil formation, SS316L, for cable diameters 74mm to 82mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT082-SS316L/PO-ML 151-05015

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 74mm to 82mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT082-SS316L/PO-ML 151-05015

Cable cleat trefoil formation, SS316L, for cable diameters 77mm to 85mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT085-SS316L/PO-ML 151-05016

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 77mm to 85mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT085-SS316L/PO-ML 151-05016

Cable cleat trefoil formation, SS316L, for cable diameters 82mm to 88mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT088-SS316L/PO-ML 151-05017

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 82mm to 88mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT088-SS316L/PO-ML 151-05017

Cable cleat trefoil formation, SS316L, for cable diameters 88mm to 96mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT096-SS316L/PO-ML 151-05018

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 88mm to 96mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT096-SS316L/PO-ML 151-05018

Cable cleat trefoil formation, SS316L, for cable diameters 96mm to 103mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT103-SS316L/PO-ML 151-05019

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 96mm to 103mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT103-SS316L/PO-ML 151-05019

Cable cleat trefoil formation, SS316L, for cable diameters 103mm to 111mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT111-SS316L/PO-ML 151-05020

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 103mm to 111mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT111-SS316L/PO-ML 151-05020

Cable cleat trefoil formation, SS316L, for cable diameters 111mm to 119mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT119-SS316L/PO-ML 151-05021

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 111mm to 119mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT119-SS316L/PO-ML 151-05021

Cable cleat trefoil formation, SS316L, for cable diameters 119mm to 128mm, IEC61914-2021

Cable cleat, trefoil

Primerjava

CCT128-SS316L/PO-ML 151-05022

Primerjava

Cable cleat, trefoil

Primerjava

Cable cleat trefoil formation, SS316L, for cable diameters 119mm to 128mm, IEC61914-2021

Primerjava

1 Bag

Metal (ML) CCT128-SS316L/PO-ML 151-05022

Plastic hose clamp, ⌀15.0-16.8mm, natural, 500pcs.

Completely reusable - will not rust or corrode.

Primerjava

SNP10(E)-POM-NA 191-10109

Primerjava

Completely reusable - will not rust or corrode.

Primerjava

Plastic hose clamp, ⌀15.0-16.8mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP10(E)-POM-NA 191-10109

Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP10-PA66HIRHSGF15-BK 192-10100

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP10-PA66HIRHSGF15-BK 192-10100

Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP12(E)-POM-NA 191-10129

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP12(E)-POM-NA 191-10129

Plastic hose clamp, ⌀18.1-19.9mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP14(E)-POM-NA 191-10149

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀18.1-19.9mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP14(E)-POM-NA 191-10149

Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP16-POM-NA 191-10169

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP16-POM-NA 191-10169

Plastic hose clamp, ⌀19.1-21.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP16-PA66GF13-BK 192-10160

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀19.1-21.7mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP16-PA66GF13-BK 192-10160

Plastic hose clamp, ⌀22.3-25.3mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP19-PA66GF13-BK 190-00090

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀22.3-25.3mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP19-PA66GF13-BK 190-00090

Plastic hose clamp, ⌀6.0-6.5mm, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Completely reusable - will not rust or corrode.

Primerjava

SNP1-POM-WH 190-00022

Primerjava

Completely reusable - will not rust or corrode.

Primerjava

Plastic hose clamp, ⌀6.0-6.5mm, white, 100pcs.

Primerjava

100 pcs.

White (WH) SNP1-POM-WH 190-00022

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Completely reusable - will not rust or corrode.

Primerjava

SNP1-PA66GF13-BK 192-10010

Primerjava

Completely reusable - will not rust or corrode.

Primerjava

Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP1-PA66GF13-BK 192-10010

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.

SNP - Snapper Hose Clips range.

Primerjava

SNP2(E)-POM-NA 191-10029

Primerjava

SNP - Snapper Hose Clips range.

Primerjava

Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP2(E)-POM-NA 191-10029

Plastic hose clamp, ⌀22.7-24.7mm, natural, 500pcs.

SNP - Snapper Hose Clips range.

Primerjava

SNP20(E)-POM-NA 191-10209

Primerjava

SNP - Snapper Hose Clips range.

Primerjava

Plastic hose clamp, ⌀22.7-24.7mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP20(E)-POM-NA 191-10209

Plastic hose clamp, ⌀25.3-27.3mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP22(E)-POM-NA 191-10229

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀25.3-27.3mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP22(E)-POM-NA 191-10229

Plastic hose clamp, ⌀23.7-27.4mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP22-PA66GF13-BK 192-10220

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀23.7-27.4mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP22-PA66GF13-BK 192-10220

Plastic hose clamp, ⌀25.0-28.8mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP24-POM-NA 191-10249

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀25.0-28.8mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP24-POM-NA 191-10249

Plastic hose clamp, ⌀25.8-29.2mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP24-PA66GF13-BK 192-10240

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀25.8-29.2mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP24-PA66GF13-BK 192-10240

Plastic hose clamp, ⌀28.8-33.2mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP28-PA66GF13-BK 190-00127

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀28.8-33.2mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP28-PA66GF13-BK 190-00127

Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Completely reusable - will not rust or corrode.

Primerjava

SNP2-PA66GF13-BK 192-10020

Primerjava

Completely reusable - will not rust or corrode.

Primerjava

Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP2-PA66GF13-BK 192-10020

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP3(E)-POM-NA 191-10039

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP3(E)-POM-NA 191-10039

Plastic hose clamp, ⌀31.2-35.8mm, black, 50pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP32-PA66GF13-BK 192-10320

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀31.2-35.8mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) SNP32-PA66GF13-BK 192-10320

Plastic hose clamp, ⌀41.0-48.1mm, black, 50pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP38-PA66GF13-BK 192-10380

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀41.0-48.1mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) SNP38-PA66GF13-BK 192-10380

Plastic hose clamp, ⌀10.8-12.3mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP4(E)-POM-NA 191-10049

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀10.8-12.3mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP4(E)-POM-NA 191-10049

Plastic hose clamp, ⌀41.0-44.2mm, natural, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP42(E)-POM-NA 191-10429

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀41.0-44.2mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) SNP42(E)-POM-NA 191-10429

Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP4-PA66GF13-BK 192-10040

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP4-PA66GF13-BK 192-10040

Plastic hose clamp, ⌀52.2-58.6mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP50-PA66GF13-BK 192-10500

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀52.2-58.6mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP50-PA66GF13-BK 192-10500

Plastic hose clamp, ⌀56.7-59.2mm, natural, 100pcs.

SNP - Snapper Hose Clips range.

Primerjava

SNP58(E)-POM-NA 191-10589

Primerjava

SNP - Snapper Hose Clips range.

Primerjava

Plastic hose clamp, ⌀56.7-59.2mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) SNP58(E)-POM-NA 191-10589

Plastic hose clamp, ⌀12.0-13.7mm, natural, 500pcs.

SNP - Snapper Hose Clips range.

Primerjava

SNP6(E)-POM-NA 191-10069

Primerjava

SNP - Snapper Hose Clips range.

Primerjava

Plastic hose clamp, ⌀12.0-13.7mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP6(E)-POM-NA 191-10069

Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP6-PA66GF13-BK 192-10060

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP6-PA66GF13-BK 192-10060

Plastic hose clamp, ⌀11.4-13.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP7-PA66GF13-BK 192-10070

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀11.4-13.7mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP7-PA66GF13-BK 192-10070

Plastic hose clamp, ⌀13.7-15.3mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP8(E)-POM-NA 191-10089

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀13.7-15.3mm, natural, 500pcs.

Primerjava

500 pcs.

Natural (NA) SNP8(E)-POM-NA 191-10089

Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP8-PA66GF13-BK 192-10080

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP8-PA66GF13-BK 192-10080

Plastic hose clamp, ⌀7.1-7.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP1.25-PA66GF13-BK 190-00029

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀7.1-7.7mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP1.25-PA66GF13-BK 190-00029

Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP12A-PA66GF13-BK 190-00254

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP12A-PA66GF13-BK 190-00254

Plastic hose clamp, ⌀19.9-23.6mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP18A-PA66GF13-BK 190-00258

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀19.9-23.6mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP18A-PA66GF13-BK 190-00258

Plastic hose clamp, ⌀18.5-21.0mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

SNP14A-PA66GF13-BK 190-00300

Primerjava

Designed for quick, ratcheted installation and can be released and reused.

Primerjava

Plastic hose clamp, ⌀18.5-21.0mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) SNP14A-PA66GF13-BK 190-00300

Product kit, various, 195pc.

195-piece fixings kit, BMS-100.

Primerjava

BMS-100-DIV-MIX 151-00000

Primerjava

195-piece fixings kit, BMS-100.

Primerjava

Product kit, various, 195pc.

Primerjava

1 pcs.

Various (MIX) BMS-100-DIV-MIX 151-00000

Cable clip for screw fixation, ⌀5.3 mm, Dmin=6.0mm, Dmax=8.5mm

Primerjava

KB2-PA66-BK 231-10200

Primerjava

Primerjava

Cable clip for screw fixation, ⌀5.3 mm, Dmin=6.0mm, Dmax=8.5mm

Primerjava

100 pcs.

Black (BK) KB2-PA66-BK 231-10200

Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5

Arrowhead clip with TwistLock.

Primerjava

HTS9-PA66-BK 151-00725

Primerjava

Arrowhead clip with TwistLock.

Primerjava

Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5

Primerjava

100 pcs.

Black (BK) HTS9-PA66-BK 151-00725

Cable clip, Dmax=6.0mm

Primerjava

Cable Clip-PA66HIR-NA 151-14200

Primerjava

Primerjava

Cable clip, Dmax=6.0mm

Primerjava

1000 pcs.

Natural (NA) Cable Clip-PA66HIR-NA 151-14200

Cable clip, Dmax=6.0mm

Bracket KBLS for parallel cable routing.

Primerjava

Cable Clip-PA46-GY 151-14202

Primerjava

Bracket KBLS for parallel cable routing.

Primerjava

Cable clip, Dmax=6.0mm

Primerjava

1000 pcs.

Grey (GY) Cable Clip-PA46-GY 151-14202

Corrugated tube clip, black, 250pcs.

The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.

Primerjava

CGS1-PA66HIRHSUV-BK 151-00006

Primerjava

The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.

Primerjava

Corrugated tube clip, black, 250pcs.

Primerjava

250 pcs.

Black (BK) CGS1-PA66HIRHSUV-BK 151-00006

Blind plug, ⌀5.0 mm, natural, 1200pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

TRIM PLUG 5-PA66HIR-NA 151-00333

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀5.0 mm, natural, 1200pcs.

Primerjava

1200 pcs.

Natural (NA) TRIM PLUG 5-PA66HIR-NA 151-00333

Blind plug, ⌀20.0 x 50.0 mm, black, 1500pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

Cover Plug 20x50-PP/EPDM-BK 151-00342

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀20.0 x 50.0 mm, black, 1500pcs.

Primerjava

1500 pcs.

Black (BK) Cover Plug 20x50-PP/EPDM-BK 151-00342

Blind plug, ⌀11.0 mm, black, 1500pcs.

Primerjava

PLUG11-POM-BK 151-00360

Primerjava

Primerjava

Blind plug, ⌀11.0 mm, black, 1500pcs.

Primerjava

1500 pcs.

Black (BK) PLUG11-POM-BK 151-00360

Blind plug, ⌀11.0 mm, natural, 1500pcs.

Primerjava

PLUG11-PA66HIRHS-NA 151-00485

Primerjava

Primerjava

Blind plug, ⌀11.0 mm, natural, 1500pcs.

Primerjava

1500 pcs.

Natural (NA) PLUG11-PA66HIRHS-NA 151-00485

Blind plug, ⌀42.0 x 84.0 mm, black, 500pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

Open Plug 42x84-PA6HIR-BK 151-00391

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀42.0 x 84.0 mm, black, 500pcs.

Primerjava

500 pcs.

Black (BK) Open Plug 42x84-PA6HIR-BK 151-00391

Blind plug, ⌀34.6 x 112.0 mm, black, 400pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

OPEN PLUG 34.6x112-PA66HIR-BK 151-00394

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀34.6 x 112.0 mm, black, 400pcs.

Primerjava

400 pcs.

Black (BK) OPEN PLUG 34.6x112-PA66HIR-BK 151-00394

Blind plug, ⌀5.0 - 5.5 mm, black, 500pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

PLUG5.5-PA6HIR-BK 151-00399

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀5.0 - 5.5 mm, black, 500pcs.

Primerjava

500 pcs.

Black (BK) PLUG5.5-PA6HIR-BK 151-00399

Blind plug, ⌀5.0 - 5.5 mm, grey, 2000pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

PLUG5.5-PA6HIR-GY 151-00401

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀5.0 - 5.5 mm, grey, 2000pcs.

Primerjava

2000 pcs.

Grey (GY) PLUG5.5-PA6HIR-GY 151-00401

Blind plug, ⌀7.05 - 7.25 mm, black, 2500pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

PLUGFT7-PA6HIR-BK 151-00414

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀7.05 - 7.25 mm, black, 2500pcs.

Primerjava

2500 pcs.

Black (BK) PLUGFT7-PA6HIR-BK 151-00414

Blind plug, ⌀32.0 mm, black, 1500pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

Cover Plug 32-EPDM-BK 151-00424

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀32.0 mm, black, 1500pcs.

Primerjava

1500 pcs.

Black (BK) Cover Plug 32-EPDM-BK 151-00424

Blind plug, ⌀6.5 - 7.0 mm, grey, 1000pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

PLUGFT6XL-PA66HIR-GY 241-00001

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀6.5 - 7.0 mm, grey, 1000pcs.

Primerjava

1000 pcs.

Grey (GY) PLUGFT6XL-PA66HIR-GY 241-00001

Blind plug, ⌀6.5 - 7.0 mm, black, 1000pcs.

Blindplugs are available in different dimensions and materials.

Primerjava

PLUGFT6XL-PA66HIR-BK 241-00002

Primerjava

Blindplugs are available in different dimensions and materials.

Primerjava

Blind plug, ⌀6.5 - 7.0 mm, black, 1000pcs.

Primerjava

1000 pcs.

Black (BK) PLUGFT6XL-PA66HIR-BK 241-00002

Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Iskanje prodajalca Kontakt

‹ › ×