Wiring duct, wide fingers, halogen-free, 75x75.0mm, L=2m, grey, 24.0m
Številka proizvoda 183-17575 | HTWD-HF-75X75-PC/ABS-GY |

Excellent fire-safety characteristics
Narrow slots suitable for small-diameter wires
Smooth, burr-free edges protect installers from injury and wires from damage
Fingers can be removed with no sharp edges at pre-notched snap-off points
Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges
Duct covers hold securely even in a vertical position and under vibration
Cover is flush with side of duct, allowing for tight, contiguous placement of duct
Base perforation according to DIN EN 50085

Zahtevajte svojo individualno ponudbo zdaj

Zahtevajte ponudbo

Poiščite distributerja v svoji bližini

More products in this product group:

Application	HellermannTyton HTWD-HF halogen-free ducts are used wherever there are high demands on personal or material safety, such as public transport, tunnels, lifts and data processing centres. Note: Halogen-free PC+ABS is not resistant to all oils and greases.
Colour	Grey RAL 7035 (RAL7035)
Current leak stable Yes/No	Yes
Fixation Method	Screw Mounting
Material	Acrylonitrile Butadiene Styrene alloyed with Polycarbonate (PC/ABS)
PART DESCRIPTION	HTWD-HF-75X75-PC/ABS-GY
Package Content	24.0m
Package Content packed in	pack
Product Family	HelaDuct HTWD-HF (DIN sizes)
Product Group	HTWD Halogen Free Wiring Duct
Short Description	Wiring duct 75x75 mm, 2000 mm, PC/ABS, grey
Type	HTWD-HF-75X75
Type of side wall	Slotted
UV-Stabilised	No
Weight/Unit	0.53kg

4FTOOL 182-96000

Na mojem seznamu izdelkov Ne pozabite

Če želite uporabiti seznam izdelkov, se prijavite ali registrirajte:
Prijava / Registracija